Silver XY Graph Control legend does not scale properly

When a Silver XY Graph Control is dropped on a front panel, and the control is set to "Fit Control to Pane", the graph legend does not move like it is supposed to. This seems to only affect the XY graph. The waveform graph/chart opererate correctly (i.e., like the Modern controls). Can anyone confirm this?
Chris

Hello D60,
This behaviour has not been fixed in LV 2012.
COPY - Please use "Copy to clipboard" by right clicking on the background
PASTE:
Please note that only the background of the graph will change. The rest of the elements such as the legend will not be altered (I did specify this was a cheap workaround )
In my case, this was not an issue, since I was only displaying the legend (which I made transparent anyway).
Please see the attached .ctrl file.
Merry Christmas!
Jorge
Attachments:
Silver XY Graph (Fix).ctl ‏8 KB

Similar Messages

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • Icloud control panel does not install properly but only when trying to sync with Outlook 2010.  If I try to sync photos, etc. it works just fine

    Downloaded icloud control panel to Win 7.  Everything seems ok until you "apply" synching at the icloud control panel.  Then you get an error message that says "icloud control panel did not install properly".  Repairing in Windows control panel as suggested does not help.  If you do not try to sync Outlook data (2010) then it seems to work just fine.

    I was able to finally stop ITunes from crashing after many days of searching n restarting my computer many times.
    a) First I went to this site ->http://forums.techarena.in/guides-tutorials/1119812.htm that showed me how to disable DPE. Please make sure that u have good virus...etc.. protection first before doing this. I have Avast Internet Security. RESTART UR COMPUTER..
    b) I then uninstall ITunes by following this site ->http://support.apple.com/kb/ht1923      RESTART UR COMPUTER..
    c) I then downloaded a beta version of ITunes. I happen to download beta 7 before the final of 10.5 version came out. Installed it. After installing I click on it n it said somewhere along the line of "this ITune ver. expired" I checked in my Programs n Features n notice that QuickTime was installed w that beta version.   
    d) Go online n download the final version of ITunes ->http://www.apple.com/itunes/download/ ...... After u finish dling install that. After that's done connect your IPod, IPhone...etc... n click on ITunes, it should sync all the way.
    I was finally able to sync all thru the steps insteading of it crashing on me midway. Hopefully this will work for you. Good luck !
    IPhone4, Gateway Windows Vista 32bit

  • The master site control file does not contain a component item for SMS_STATUS_MANAGER.

    New to the System Center world. We are using a fresh install of Server 2012 R2 and System Center R2 with everything working until Server 2012 R2 Update 1 was installed. Now we are getting the following:
    Site type: Primary Site or CAS SMS_STATUS_MANAGER
    6/4/2014 1:35:21 PM 10996 (0x2AF4)
    Resolved the "Status Manager" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Resolved the "Site Control Manager (Master Site Control File)" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Parsed the master site control file, serial number 1551209029.
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    This site is the central site. SMS_STATUS_MANAGER
    6/4/2014 1:35:21 PM 10996 (0x2AF4)
    ERROR: The master site control file does not contain a component item for SMS_STATUS_MANAGER.
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Sleeping for 60 seconds... SMS_STATUS_MANAGER
    6/4/2014 1:35:21 PM 10996 (0x2AF4)
    Any thoughts on how to fix this? Seen a few references to a "site reset" for SCCM 2007 but wanted to make sure there wasn't anything else to try before heading down that road with 2012R2.

    A site reset can also be done in CM12 so it's worth a try.
    Torsten Meringer | http://www.mssccmfaq.de

  • Firefox 4.0.1 does not install properly. It keeps asking to reboot to finish. i can't uninstall it via Control Panel.

    I had Mozilla Firefox 4.0 on Windows 7. I saved the bookmarks and uninstalled it. Downloaded 4.01 and did the typical standadrd install. It asked for a reboot to finish as expected. I rebotted and it did not finish installation. Then I tried to unistall it using control panel. So that removed it (or so it seemed). So i went to reinstall. Mozilla says reboot to finish install immediately. That of course does not work, can't uninstall as control panel does not see itand cant install. Anyone know how to completey get rid of this thing. No I cant delete it from the C:\Program files <x86> directory either. It's a hung mess.

    You gone about it the wrong way I'm afraid. For future reference; to update version 4.0 to 4.0.1 and for future editions, go to '''Help '''| '''About Firefox''' and then click the '''Check For Updates''' button.
    I think what you'll have to do now is follow instructions in this article to uninstall it: http://kb.mozillazine.org/Uninstalling_firefox
    Once you've achieved that goal, go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop using either IE8 or 9. Save the file to your desktop when you see the prompt and then reinstall it from there.

  • Legend does not display with Line Chart

    I have a query that I wrote with Bex Query Designer v3.5.11 for a BW 3.5 system.  When I click Graphical Display tab in the query results, "Column Chart" shows a legend, showing which colors mean what.  However, when I switch to a different type of chart, such as Line Chart, Legend does not appear.  Anyone know how to make this appear?  without the legend, the chart isn't very useful.

    You can create a Web Template, Drag a Chart.
    1) Assign a query to the chart
    2) Right click over the Chart and select Edit Chart
    3) Select Chart Designer.
    4) Look for "Series" in the Overview Window
    5) Expand the Series.
    6) Activate the checkbox "Show Labels" on all the
       series that you want to have values.
    Regards
    Armando Flores

  • Main content text does not scale down on iPhone

    Hello my Dreamweaver friends,
    I'm working on a site for a friend -- a simple fixed width layout (header, footer, sidebar and main content). It looks good on Safari and Firefox. But on the iPhone and iTouch the text in the mainContent area does not scale down to size with the <h> tags and the links on the Spry navigation bar. Is there a reason for that? Is there something I could do so that it all scales down?
    Another problem is that the right border I put on the Spry Navigation menu doesn't appear on my version of Internet Explorer.
    The link to the page, for what its worth, is http://www.daveharrison.info/tzs/index.html
    Thanks for any help!

    12 tips for iPhone Web Design
    http://articles.sitepoint.com/article/iphone-development-12-tips
    Also see this working Demo with media queries.  Resize your non-IE browser viewport and see what happens.
    http://alt-web.com/TEMPLATES/CSS-centered-round-boxes.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Control-clicking does not work in Finder

    Ever since installing the 10.4.5 update, control-clicking does not work in Finder. When I try to do it, Finder automatically restarts itself. This happens in any Finder window and on the desktop itself. Whether I am control-clicking an Application icon or trying to 'Get Info' on a file, Finder restarts itself. I repaired permissions and it did not fix the problem.
    Any idea on how to fix this? Thanks a lot!
    David
    Edit: Nevermind. I fixed it by deleting the JIMZip.plugin file in my Contexual Menu folder. I found the answer in another thread. I apologize for searching after I created this thread.

    David,
    Can you identify any corrupted or incompatible files in either your Macintosh HD/Library/Contextual Menu Items folder, or your Macintosh HD/Users/yourhomefolder/Library/Contextual Menu Items folder?
    If so you may be able to uninstall/reinstall the associated application.
    You may also consider temporary manual removal and isolation of the suspect file to verify CM functionality.
    ;~)

  • Officejet J3680 Control Panel does not respond to buttons, just make "beep sound"

    Hi everybody, thanks for reading.
    The problem is that my (brand new) J3680 control panel does not work until I press all the buttons, yes its weird.
    Note #1: The printer works perfect when used through the computer (I am Linux user).
    Note #2: Once I have pressed all the buttons at control panel the control panel (kind of) works.
    Heres how this happens:
    I plug the power cord
    Now, the printers start and not even the Power button works, so I cant turn it off, each time I press any button it just do a “beep sound” and the LCD screen keeps the same
    The LCD shows this:
    0 Speed Dial
    <One-Touch 1>
    Now I have figured out what the LCD screen initialization means:
    0: Thats the times I have pressed the “Speed Dial” button
    Speed Dial: Thats the button I have to press to make the Control Panel works
    <One-Touch 1>: This is the next button I have to press after the “Speed Dial” has been pressed
    The printer then makes me press all the buttons (...)
    I think this is kind of some “Control Panel button calibration", because the LCD respond perfect when I press the button the printer ask
    The other problem is that I don't know how to finish this calibration or whatever this is, because I reach a point where I cant find the button it ask
    The LCD ends showing:
    1 Color Start
    <Hidden 1+Black>
    Where “1 Color Start” was the last button it asked me to press, and the <Hidden 1+Black> is the next one combination.
    Note that “Hidden 1” is not “1” not “Speed Dial 1”, I have just tried that combinations, but does not work.
    Please help I have to do this each time I turn on the printer to make the control panel work. Thanks a lot.
    Message Edited by NxGTR on 08-14-2009 07:15 AM

    Nao    Consigo  estalar   impressoura   HP  Officejet  J3680   Faz  horas   que estu tentando  estalar  nao  sei se  esuporte   ou provedor  gostaria  muito  de ajuda  para  italar.  obrigado  Rui

  • Extraction error "Target cost version in controlling area does not exists"

    Hi Gurus,
    I am trying to pull some data from a SAP OLTP system into SAP BW 710 system, using extractor "0CO_PC_02". The data load is failing with the below error message:
    Target cost version in controlling area does not exist     KN     147
    Target cost version 2 not defined. Check your entry     KV     35
    Internal program error ( Order 000010510554 Version 002 )     RM     11
    Errors in source system     RSM     340
    The same error is thrown when I am trying to execute the extractor in RSA3 in the source system.
    Please help me with the resolution of the same. It's a high priority job we are handling as of now in this.
    Thanks & Regards,
    Vikas Kr.

    You are attempting to display data on a target cost version that does not exist in controlling area.
    see this http://forums.sdn.sap.com/thread.jspa?threadID=1609418
    http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YV-KN147

  • My control panel does not have flashlight,calculator or portrait lock

    Control panel does not have flashlight,calculator or portrait lock

    There is no flashlight since the iPad has no flash with it's camera. There is no calculator icon since the native calculator app available with the iPhone version is not included with the iPad's version of iOS 7. The rotation lock depends on Settings/General/Use side switch to..., setting it to mute audio will put the lock screen button on Control Panel. Setting it to lock screen rotation will change the button in Control Panel to a Mute button.

  • Beware: icloud control panel DOES NOT WORK for icloud email

    Opposing evidence is welcome. Please comment.
    After dozens of hours, emails and chat sessions with both MS and Apple tech support (the latter escalated as high as it could go - "after this we have to refer you to engineering"), I was finally told by Apple Senior Advisor Ciara Ferguson that icloud control panel does not properly sync icloud mail with Outlook 365 (Outlook 2013).  After several months of working on dual systems I discovered that many (but not all) changes to folder names and filing of emails in various folders made in Outlook were not reflected on icloud and vice versa.   Ms. Ferguson has stated that icloud control panel "works better with calendar and contacts."  Obviously, this non-committal statement is grossly insufficient.  It either works or it doesn't.  It doesn't. 
    Allegedly, icloud control panel does work to sync other email (the example of an outlook.com email address was given) into apple devices.  This doesn't sound right to me either, since one can just add any POP or IMAP or Exchange account into a Mac device, so why would one need icloud control panel to interface?
    I remain stymied as to the actual purpose of icloud control panel, despite asking exactly that question of Ms. Ferguson on several occasions.  The Apple literature and its own setup screens suggest that it will sync email, contacts, calendar and notes with MS Outlook, but as to email, that is apparently untrue.

    I don't think so.  I'd like to sync photostream from two iPhones with distinct Apple IDs on our PCs and I don't see a way to do it.  It synced my wife's iPhone while she was logged in to iCloud control panel but not mine until I logged in (and disconnected her photostream PC syncing).

  • I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    Hello, do you have another admin account to log into for a test?

  • HT201317 My icloud control panel does not allow me to turn on photos. Contacts, Bookmarks etc.. are ok

    My icloud control panel does not enable the Photos check box. Cannot view photos on PC that are taken with iphone and ipad.

    Hi Randers - thank you for the advice.  I signed out of the account on all devices, however when I try to go into iCloud on the Mac to re-input my account details, I'm presented with the following error message:
    'Could not load iCloud preference pane'.  Is there something additional I'm meant to do to be able to load an iCloud account on the Mac?

  • Confirmation control key does not exist

    There is a old one PO, which was created with confirmation control key ZSC1 ; Now issue is ZSC1 has been deleted but it is showing in po, now user want to close the po as want to ticked the "delivery completed" ind. in the Delivery tab page at Item level in the po.
    In this cas he is facing the error as "Confirmation control key does not exist" so:-
    1. How can be close the po.
    2.Is there any option, from where we can check the change control i.e. can be checked when ZSC1 was deleted.

    Hi Jurgen,
    I think you misinterpret regarding this issue.
    confirmation control key is not deleted in PO.
    It is deleted from configuration setting I mean from IMG -> Material Management -> purchasing -> confirmation -> Setup confirmation control.
    since it's exists in po but not in config. thats the reason system given us that error.
    so my question was:-
    how to get change control for the same, i.e. when it was deleted from config. setting
    And how set del. completed ind. in po for closing the po, bcoz it's showing error as "Confirmation control key ZSC1 does not exists"

Maybe you are looking for