Silverlight and Flashplayer not working

I'm having a bit of trouble with both Microsoft Silverlight and Adobe Flashplayer. Yesterday, both applications worked just fine. Today, I went to watch Netflix and it said I needed to install Silverlight. So I did, and that didn't work. Uninstalled, re-installed, rebooted several times. I've followed the advice of several others, but none have worked.
Adobe updated it's package of applications about a week ago. I've used flashplayer since then. YouTube didn't work this morning. I un-installed and re-installed Flashplayer, but it's having the same problem as Silverlight.
Anyone have other ideas?
MacBook, Mavericks (OS10.9.2)

Adobe Flash version 12.0.0.38
Microsoft Silverlight 5.1.10411.0
While not the latest version, I can configure works fine with Netflix on Mac OS X 10.9.2.
If you have a newer version, and it still doesn't work then Clean My Mac may have erased something something it needs to operate by mistake.
Removing Cleanmymac I'd have to enquire the developer how to do.
Your best bet is simplify, by backing up and doing a restore with command-R.
Then just add the Silverlight and update your Flash.
And try the websites in question.
Once you are able to run it successfully, individually restore applications and drivers, testing the said websites to ensure you haven't suddenly made yourself incompatible.
If you find something that makes it not work, go to http://www.roaringapps.com/ and make a report of what doesn't work with the said plugin.
Do not use antivirus, firewall, or system cache cleaning applications, unless trying to troubleshoot an issue.
The only utility you need on a Mac that is not running Windows is a backup utility.

Similar Messages

  • Pageup and pagedown not working in firefox

    pageup and pagedown not working in firefox. I read in other posts to install the latest graphics driver and I did. I also uninstalled flashplayer and downloaded and installed the latest version.

    Hello yukhateeee try to hitting the F7 key in keyboard and check it again.
    also you can '''UNCHECK Always use the cursor keys to navigate within pages''', go from '''Firefox button''' > '''Options''' > '''Options''' > '''Advanced''' > '''General''' tab > '''Accessibility '''session > A'''lways use the cursor keys to navigate within pages [ ]'''.
    thank you

  • Why is Adobe Flashplayer not working with Apple? Do you have an other flash program you recommend?

    Why is Adobe Flashplayer not working with Apple? Do you have an other flash program you recommend?

    maj-brittfromsjöbo wrote:
    Thank you for your interest in Adobe Flash Player. Unfortunately Apple does not allow Flash Player to be installed on iPhone or iPad.
    May I add, this is the answer I get When I try to Download Adobe Flash Player
    You get the message because that is exactly the situation. Apple has not allowed any Flash on iOS devices.
    What site are you trying to see? Many sites now provide Flash alternatives. For example, if you want to listen to Pandora, instead of using the Flash on the Pandora website, instead you download the Pandora app for the iPad.
    In the future, even if Apple wants to add Flash to the iPad, it won't be able to because Adobe will no longer be making it at all, for any mobile device:
    http://www.wired.com/gadgetlab/2011/11/adobe-kills-mobile-flash/
    If you often go to sites that use a lot of Flash and they don't have an alternative, you should write to them and tell them to stop using Flash.

  • Wireless network and bluetooth not working on touchsmart 600

    This has not worked since day 1 and I have been using wired internet.
    I really need to setup a home network and need to use wireless.
    Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
    Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
    Please advise  

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My Ipod touch 4th generation is not working, its frozen, ive tried everything and its not working, its just frozen on an app and i really really need HELP!!!

    My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    You should copy everything from your old comptuer to your new one.

  • Keyboard and Trackpad Not Working; Mac OSX Unexpectedly Quit?

    Hey everyone... I think I may need to stop by the Apple store to figure this one out, but I just wanted to make sure if there was anything I could do on my own first.
    So basically, on my MacBook Pro that I got nearly two years ago (late September of 2006) for the past month and a half has had problems. In the beginning, the mouse and keyboard would freeze up and just not work. Restarting the comp did nothing. Some times were worse than others (once it was frozen for 1.5 hours). Then it stopped, every now and then having a few freezes (sometimes when the keyboard froze but the trackpad was still good), but two days ago I had my comp not hooked up to an adapter. When the battery got low, the comp froze. I went to bed and closed the laptop, and the next day it was still frozen. I unfroze it, but then it happened again (I'm pretty sure the same situation... almost no battery)... and it is still frozen, even after multiple restarts.
    Also, during the time when freezes weren't as bad, sometimes the keyboard would get stuck on one key, usually the volume up button (very annoying)... then I was told to restart the comp. When I came back, I was told that Mac OS X had unexpectedly quit.
    Sorry that was a lot to read, but any help is really appreciated! Thanks!
    Not sure if this is also important, but I did spill some water on the keyboard a very long time ago (late December '06)... it wouldn't take this long for that to cause the problem, would it?

    Does booting up in [Safe Mode|http://support.apple.com/kb/HT1455?viewlocale=en_US] help at all? This boot mode checks the disk on startup and disables non-apple start up items and certain kernel extensions.
    Steve

  • While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
    If that does not work then see here http://support.apple.com/kb/HT1808

  • Hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

    hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Since I downloaded the upgraded software, my charger that came with my phone says "this cable or accessory is not certified and may not work reliably with this iphone"  It worked before but now it doesn't...I don't think I should have to buy a new one...

    since I upgraded to the new operating system my charger no longer works...
    It says"this cable or accessory is not certified and may not work reliably with this iPhone"

    Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
    After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
    Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here.

  • HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

    Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
    Maps took me to the completely wrong side of town for a long standing business in town.

    Hello margmcarlson,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
    Best of luck,
    Mario

  • My sons ipod classic was left on all day and now has a red circle with a cross in it and will not work

    my sons ipod classic was left on all day and now has a red circle with a cross in it and will not work - nothing we do will make it work - any ideas??

    Try to restore the iPod. Here's an article that provides troubleshooting for it.
    http://support.apple.com/kb/TS1463
    If that doesn't work visit an Apple Store and see if they can replace it.

  • Why does drag and drop not work?

    Why does drag and drop not work?

    Do you mean that when you move files on the Desktop, they don't stay where you put them ?.
    If so - use Finder - View menu - Show View options & choose 'Arrange by' : none
    If not - please describe exactly what the problem is.

  • HT1476 upgraded my IPOD 5 to iOS 7.0.2 and will not charge battery. when plugged in gives message "This cable or accessory is not certified and may not work reliably with this IPOD".

    Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
    When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
    Anyone else have this issue after they upgraded the iOS system?
    Thanks,

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

Maybe you are looking for

  • My iPhone 6 plus says I've used 3gb of photos but I only have 22 pictures can anyone help

    MMy iphone 6 plus says Ibe used 6gb of photos I only have 22 pictures

  • Site problems in Safari 3.04-OSX

    hi: a customer has reported problems in this site i'm working in, when browsing with Safari 3.04 in OSX: http://www.meiac.es/meiac-zkm/ (some elements aren't yet translated). it works ok in Safari 2.0.4 i'd really appreciate if somebody with Safari 3

  • Install Arch from 2007.05 "base" iso or the "current" iso?

    My old Arch install (0.7.2, upgraded in Nov. 06) may be broken, and I'm thinking of doing a fresh install of 2007.05.  For the old install, I'd followed the recommended procedure of installing just the base system from the CD iso image, then installe

  • Could not open key error installing itunes

    I get this requester saying that a registry key can not be accessed when trying to install itunes/quicktime. Just got a nano and am trying to load the app to load music. See this link foe the requester... http://www.edward-ramos.net/images/itunesErro

  • Mat ledger Productive

    I have a material ledger for a valuation area activated in OMX1 but we did not set to PRoductive using CKMSTART. Its been 2 months since , can we set it to productive now. Also there are other plants having ML productive in the same company code. is