Silverlight dialog box for update

I keep getting the update dialog box for silverlight. It only give option to update or remind later.
I do not want the up date and do not want to keep seeing the dialog box pop up. How
do I stop this.

If the update is in the App Store, see below.
Hide Update in Mavericks

Similar Messages

InDesign "Save As" dialog box for every operation in INDB book file; updating page numbers, etc.

So I haven't used INDB files in awhile in InDesign, and today was the first time I attempted to adjust an old INDB (created originally with CS5). For every operation of adjusting the book file, such as updating page/section number or adding/removing an INDD file I get a Save As dialog box for each constiuent INDD file. This is quite annoying since the book has lots of INDDs, and I have to click through the tedious save as with each. I previously worked with INDBs in CS5, and never encountered this, there was no need to save each INDD in the book just to update the page numbers. I tried creating a new INDB in CS5.5 thinking that maybe it was because I was working from a file created with an older version of InDesign. Does anyone know if there is a way to suppress the Save As dialog? Another thing I noticed that is supremely frustrating is that this new build of InDesign doesn't default to saving the file in its original location, and I have unwittingly ended up saving files in other places, only to later realize it. I am using InDesign CS5.5 Ver. 7.5.2 on Mac OSX 10.7.3 Any help is greatly appreciated.

It will only happen once (and frankly, what you are doing is a very bad idea).
When you open the old book in CS5, you are converting to the new format. All of the legacy files also need to be converted, even if added to a new book in CS5.5, hence the Save As since ID will not overwrite the old versions until you tell it to (and that's the bad idea). I strongly recommend (though it's too late for any books you've already updated and overwritten) that you either continue to edit in the old version, or that you take the time to open each file in the original version if it's older than CS5, then export to interchange format (.inx or .idml, depending on version), open those files in CS5.5, save with new names so you don't overwrite anything, then add to a new book and proceed.
One of the reasons I recommend this seemingly time-consuming approach is that there are too many reports (another one yesterday) of some sort of problem that pops up late in the editing cycle when converting legacy files to CS5/5.5 by opening them directly and saving. This is a belt and suspenders insurance approach, and is far less labor intensive than starting over, which might end up being your other option down the road if something goes wrong.

Print Dialog Box for Addon is not showing in Terminal Server

Dear All,
I have created a addon for Automatic Sales Invoice printing that prints the crystal report directly to the printer bu opening a
print dialog box for printer selection through SDK code.
The Same addon works fine on the server with print dialog box being showing through SDK code.
But while running on Terminal Server , print dialog box is not showing any printer though printers are redirected to that
terminal server.I am not getting whether the problem is in my addon or in the terminal server printer settings.
Please suggest as i need to know the reason urgently.
Thanks
Amit

Hello Edward,
Thanks for your reply .
But the problem is that while running on normal server the print dialog box appear with the printer name in my addon for printer selection .
But while using terminal server , the print dialog box is not getting any printer in the dialog box .That's the major concern for me
is their any way to check that why the printers are not showing in print dialog box.
Thanks ,
Amit

Change File Name In The "File Download" Dialog Box For Web Reports

Hi All ,
I followed the below note to change the "File Download" name.
How To Change The File Name In The "File Download" Dialog Box For Web Reports? Doc ID: Note:418366.1
However its not working. Has anyone tried this and works fine ?
Basically I wanted to change the name "rwservlet" when a report is run in an
excel format.
Rajesh Alex
Rajesh Alex

Hello,
Have you checked if a HTTP header "Content-disposition" is returned ?
You can use ieHTTPHEaders for IE
http://www.blunck.se/iehttpheaders/iehttpheaders.html
and
Live HTTP Headers for FireFox
https://addons.mozilla.org/en-US/firefox/addon/3829
Regards

How to handle the button "cancel" in a dialog box for displaying views?

Hello!
I ve a question about handling the cancel button in a dialog box for displaying views.
I ve already implemented the dialog box by using the following code:
METHOD eh_onnewqact.
DATA stitle TYPE string.
IF m_popup IS BOUND.
    stitle = cl_bsp_runtime=>get_otr_text( alias = 'ZCC_ICRM/NEW_TASK' )."cl_wd_utilities=>get_otr_text_by_alias( 'ZCC_ICRM/NEW_TASK' ).
    m_popup = comp_controller->window_manager->create_popup(
      iv_interface_view_name = 'ZCC_POPUP_NEWBT/NewQActWindow'
      iv_usage_name = 'CUNewQAct'
      iv_title = stitle
    CALL METHOD m_popup->set_on_close_event
      EXPORTING
        iv_view       = me
        iv_event_name = 'NEWQACT_POPUP_CLOSED'.
ENDIF.
m_popup->open( ).
ENDMETHOD.
My dialog box consists two buttons - cancel and create.
The cancel buttons should close the popup and the create button should create an entity of a specified object. but let us come to the cancel button. I did´nt find any information about implementing an cancel button. So, how should I implement it? I thougt
me->close( ). But that didnt works!
Could u give me further information about that, because my cancel event-handler is empty?
method EH_ONCANCEL_QACT.
endmethod.
After that I would know how my calling view could know that the user pushes the Create Button and how the data of 2 inputfields of the dialog box finds their way to the calling view in order to process this data there?
Thank you very much!

Hi Michael,
thank you for your advice! This problem is solved...
...but I have another issue. Ive implemented 2 editable fields in my popup. The user should fill that fields with context and that context should be processed in the calling view of my popup.
My question is how to transfer these information from my popup to my calling view or method?
I tried the following...
      lv_context_node ?= m_popup->get_context_node( 'QUICKACT' ).
      IF lv_context_node IS NOT INITIAL.
        lv_text = lv_context_node->get_date( attribute_path = '' ).
      ENDIF.
But it doesnt work! The context node object is always empty/initial.
Thank you!
PS: Another possibility could be that the object / node of the calling view is transferred to the pop-up in order to process it there.
Edited by: Marcus Findeisen on Feb 22, 2011 12:13 PM

How to make a dialog box for a user to choose a file from disk

Hi there
Is it possible to make a dialog box, for a photoshop user, to choose a txt file, to be process by my javascript ?
I have a txt file with all the names and locations of psd files i want to process by photoshop. I have ex. 100 out of a folder with 250 images.
If anyone have a shot "code sample" how to select a file - i will be happy.
/T

Here is an example of selecting a text file...
var dlg=
"dialog{text:'Script Interface',bounds:[100,100,500,220],"+
"testFile:EditText{bounds:[10,40,310,60] , text:'' ,properties:{multiline:false,noecho:false,readonly:false}},"+
"Browse:Button{bounds:[320,40,390,61] , text:'<<' },"+
"statictext0:StaticText{bounds:[10,10,240,27] , text:'Please select Text File' ,properties:{scrolling:undefined,multiline:undefined}},"+
"Process:Button{bounds:[10,80,190,101] , text:'Process' },"+
"button2:Button{bounds:[210,80,390,101] , text:'Cancel' }};"
var win = new Window(dlg,'test');
win.center();
win.testFile.enabled=false;
win.Browse.onClick = function() {
selectedFile = File.openDialog("Please select TEXT file.","TEXT File:*.txt");
if(selectedFile != null) win.testFile.text = decodeURI(selectedFile.fsName);
win.Process.onClick = function() {
if(win.testFile.text == '') {
alert("No text file has been selected!");
return;
win.close(1);
selectedFile.execute();
win.show();

What is the "Extract" button at the bottom the DNG converter dialog box for ?

Does anyone know ....
What is the "Extract" button at the bottom the DNG converter dialog box for ?
THANK YOU

In DNG Converter you have an option to embed the original RAW files (CR2, NEF etc) into the DNG file (see screenshot). Later you might want to extract them back, for example, for converting in camera-maker's own software.
So, if you have any DNGs with original RAWs embedded, Extract button will get them back.

I want to install PS and LR on my second computer ( laptop ) but once in dialog box for password it doesn't accept my password

I want to install PS and LR on my second computer ( laptop ) but once in dialog box for password it doesn't accept my password

Nobody can tell you anything without proper system info or other technical details.
Mylenium

How fix lost dialog box for typing in wanted web site url after installing security update 20110811165603 into Mac OS 10.6 snow leopard today 6.04.2011.

Today, was prompted to install new security update. Did so. Now when click on + to open new tab the words New Tab appear in the tab. But, no dialog boxes appear to type in wanted new URL and no google dialog box appears in the tab area.
Every thing was fine before installed this new security update 20110811165603 into Mac OS 10.6 snow leopard computer.

Thanks for your reply and sorry for the delayed response - have been away for a few days over the holidays.
I understand your point about backups and disk permissions. I do have a back up copy and will adopt using the 'verify disk' step in future; so, for me the loss shouldn't amount to any more than the time I have spent, as frustrating as that is. However, I think the point I'd like to make is that doing a disk permissions check is fine for those like me [or others on this forum] since I work in a hi-tech industry, and have worked in a Unix/Linux environment for the last ~20 years so understand about permissions etc. , but I know people with Macs for whom the key advantage is that the they largely 'manage themselves' seamlessly. So, if the verify step is simply a pushbutton check-then-repair step and omitting it can lead to such fatal errors, then why can't it be built into the update script as the first automatic step ? What I mean is; my computer reached this unusable state simply by pressing 'ok' on a planned update, so to the average-Joe user it looks like a 'stop and catch fire mode'.
For info: I have now used Disk Warrior, which is reporting a disk malfunction, but can recover the user data. It seems to be a remarkable coincidence though, because there were no system problems exhibited before the update.

HT6150 Security Update 2014-001 caused a FaceTime password dialog box for an old logon to open

FaceTime dialog box with old user name pops up every time I logon asking for a password.

Hi whirligiggrotto,
Welcome to the Support Communities!
The article below may be able to help you with this.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Cheers,
- Judy

Filter in the Dialog box for selection

I have report that contains a file selection dialog using the following code
at selection-screen on value-request for p_file.
perform f_get_file using cl_gui_frontend_services=>filetype_excel.
form f_get_file using p_filetype type string.
data: lt_filetable type filetable,
        ls_file       type line of filetable,
        lv_filename   type string,
        lv_path       type string,
        lv_fullname   type string,
        lv_title      type string,
        lv_desktop    type string,
        lv_rc         type i,
        lv_action     type i.
call method cl_gui_frontend_services=>get_desktop_directory
    changing
      desktop_directory    = lv_desktop
    exceptions
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      others               = 4.
if sy-subrc <> 0.
    message e007(zspx) with 'Desktop not found'.
endif.
* Update View
call method cl_gui_cfw=>update_view
    exceptions
      cntl_system_error = 1
      cntl_error        = 2
      others            = 3.
lv_title = text-003.
call method cl_gui_frontend_services=>file_open_dialog
    exporting
      window_title            = lv_title
      file_filter             = p_filetype
      initial_directory       = lv_desktop
    changing
      file_table              = lt_filetable
      rc                      = lv_rc
      user_action             = lv_action
    exceptions
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      others                  = 4.
if sy-subrc = 0 and lv_action ne cl_gui_frontend_services=>action_cancel.
    read table lt_filetable into ls_file index 1.
    if sy-subrc = 0.
      p_file = ls_file-filename.
    else.
      clear p_file.
    endif.
else.
    clear p_file.
endif.
endform.                    " f_get_file
Currently while opening the dialog for file selection its showing the desktop directory. But user can select file from any other directory.
My question is how to restrict this dialog box from which user can select only from desktop directory.
PS : Please don't suggest to validate the file after getting the file that its from desktop or not
a®

Hi,
Like the bellow ?
Replace following code
if sy-subrc = 0 and lv_action ne cl_gui_frontend_services=>action_cancel.
    read table lt_filetable into ls_file index 1.
    if sy-subrc = 0.
      p_file = ls_file-filename.
    else.
      clear p_file.
    endif.
else.
    clear p_file.
endif.
with the bellow
IF sy-subrc = 0 AND lv_action NE cl_gui_frontend_services=>action_cancel.
    READ TABLE lt_filetable INTO ls_file INDEX 1.
    IF sy-subrc = 0.
      FIND FIRST OCCURRENCE OF lv_desktop IN ls_file-filename.
      IF sy-subrc = 0.
        p_file = ls_file-filename.
      ELSE.
        MESSAGE: 'Sorry! you can select file only from Desktop' TYPE 'I'.
        PERFORM f_get_file USING cl_gui_frontend_services=>filetype_excel.
      ENDIF.
    ELSE.
      CLEAR p_file.
    ENDIF.
ELSE.
    CLEAR p_file.
ENDIF.
Regards,
Faisal

Dialog Boxes - For example Preferences Will Not Fit Screen

I am having a problem with Adobe Version 8 preset dialog boxes being too large for my screen. I also have the same problem in Quicken so it may not be an Adobe problem. In boxes such as Preferences or Properties when opened I can not access the bottom portion of the box. Particularly a problem when what is being hidden is the command button such as OK or SAVE or FINISH or CANCEL. The boxes open in a preset size and I can not modify the box size. Nor can I drag the header bar far enough off the screen to access the bottom command buttons. Use that lovely MS Vista. Might anyone have an idea on where to start? Danke Schoen!

I am using a Sony Vaio laptop. It uses a Generic plug and play monitor.
The screen size is 15 inches. Resolution is 1280 by 800 in true color 32
bit mode. Changing the screen resolution does not affect the problem in any
manner.
Knowing shortcut keys would not help. You can not see the bottom command
buttons, therefore which shortcut key do you use or is one even needed.
If the dialog boxes were resizeable then I would not have a problem. I went
looking for some setting in Version 8.1.5 that would allow me to resize
these boxes but it was like looking for a needle in a haystack.
I am updating to Version 8.1.6 to see if the newer version does anything to
help. And yes I the monitor drivers are all current.
James F. Thoma
. . . at home in the hills of East Tennessee . . .

How can I reinstate the warning dialog box for entering a secure site?

I would like to reinstate the warning box that tells me when I am entering a secure site. The one that warns when I am leaving a secure site is working just fine. I probably unchecked the box for entering at one time or another but I can't find how to bring it back.

Looks that the Warning Messages dialog for those settings is gone from Tools > Options > Security
You can reset the related <b>security.warn_</b> prefs on the <b>about:config</b> page.

Save/open dialog box for FileWriter

Hi,
I have a JSP action link with onclick='onClickExport', defined in an underlying class file.
The 'onClickExport' method in the class creates a file:
fileName = "C:\\Temp\\SaveSearchResults.csv";
File outputFile = new File(fileName);
FileWriter out = new FileWriter(outputFile);I write results to the file using
out.write statements and finally close it using out.closeAs you might have noticed the path for the file is hard-coded as C:\Temp, so the file gets written and downloaded there. Can I instead have the open/saveas dialog box pop-up where a user can type filename and select a location for the file to save...? (like content-disposition)
Can somebody point me how to do that...
thanks,
nik

JFileChooser can't be used with JSP. If invoked in Java on the server side, then the display will be on the server, and presumably, someone is not sitting there waiting for clients to want to save files remotely.
On the client side, well, there's always applets, but that has nothing to do with JSP. And it would only be able to browser the local client, so a signed applet would be needed.

How to customize the Save as dialog Box for saving Web Query???

Hello,
we are usnging SAP NW Portal and BI 7.0 (SP14).
We have published BI web queries in the Portal and it works just fine, now when the User select the Button "Save As" in the Context Menu of any web query, this will open a new Dialog Box name "Save As Dialog Box", so from this dialog box the user can select where to save the query, he/she have 3 options* to save qureies: My Favorites, Bex Portfolio and MyPortfolio, this also works fine.
My Quetsion is: How can i customize the View of this "Save As" dialog box, so at the end the User can only select 2 Options: My Favorites + MyPortfolio. So how to hide the Tab: Bex Portfolio in the Dialog Box.
Points for any good answer.
Many Thanks and Regards,
Nazih
Edited by: Nazih Kayyali on Feb 3, 2009 4:04 AM

In what you have posted, there is no reason it shouldn't work the same way in Acrobat 9. I would recommend that you submit your complete application to developer support.

Silverlight dialog box for update

Similar Messages

Maybe you are looking for