Silverlight Update - Identity Cannot Be Confirmed

Hi.  I just tried to stream a Netflix movie to my Mac (normally I watch them on the TV).  Netflix asked me to update Silverlight.  I clicked the link to download from them.  When I tried to install it, though, it failed saying the identity of the developer could not be confirmed.  I downloaded it directly from Microsoft, and the same thing occurred.  I turned all extensions off before attempting the installation.
(Exact wording of the warning:  "Silverlight.pkg" can't be opened because the identity of the developer cannot be confirmed.  "Silverlight.pkg" is on the disk image "Silverlight.dmg".  Safari downloaded this disk image today at 6:05 PM from download.microsoft.com.
Is there a way around this?
srb

Is there a way around this?
Technology experts are working on a movie storage system where YOU have physical possession of the movie.
This system stores the movie digitally on an optical disk system that will not be dependent upon a congested, complicated, and fragile network.  Because all of the data is stored only a few feet from your television, all the bottlenecks are removed.  Performance and reliability are virtually flawless.
Further, the system will not utilize any form of security codes, authentications, or passwords. Once the optical disc is purchased it can be moved around freely at will, and can even be lent or given to friends and neighbors with zero hassles.
And if you don't like the movie, you can sell it for close to your purchase price!
In the meantime, repair permissions on your Mac and restart.

Similar Messages

  • Identity cannot be confirmed???

    Whenever I try to download the latest version on my Macbook Air, it says it cannot be opened because the identity of the developer cannot be confirmed

    Hello,
    What OS X version are you running? Please go to 'About this Mac' and provide the 'Startup Disk' information.
    What URL did you download Flash Player from?
    What is the name of the Flash Player installer file returning this message?
    Maria

  • Many 3rd party apps that I have used before now will not open with the alert "XYZ application cannot be opened because the identity of the developer cannot be confirmed"  Why now?

    Many 3rd party apps that I have used before now will not open with the alert "XYZ application cannot be opened because the identity of the developer cannot be confirmed"  Why now since I updated Mavericks?

    The format in which a developer has to sign his application in order for it to be recognized as signed has changed. Update the applications, wherever possible.
    To make a one-time exception to the security policy, follow these instructions. They apply to Installer packages and other installable items as well as applications.

  • I downloaded TunesGoWatch by Wondershare. I deleted the app. Every time I turn on my computer I get a popup saying "TunesGoWatch" can't be opened because the identity of the developer cannot be confirmed. I deleted the app, how do I stop this popup?

    I downloaded TunesGoWatch by Wondershare. I deleted the app. Every time I turn on my computer I get a popup saying "TunesGoWatch can't be opened because the identity of the developer cannot be confirmed." I deleted the app, how do I stop this popup?  Your help is truly appreciated

    First:
     (Apple menu) > System Preferences > Users & Groups > select your account > Login Items.
    Determine if that program appears in that list. If it does, select it and then remove it from Login Items with the "–" (minus) button.
    Next:
    Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Open:
    /Library/StartupItems/
    If the program or an alias to it appears in that folder, drag it to the Trash.
    Next:
    When you log out or shut down your Mac, de-select the checkbox that begins with the words "Reopen windows... "

  • I purchased a download copy of lightroom 6 from B & H Photo.  When I attempted to open the download I got the following error message.   "Download_Adobe_Photoshop_Lightroom_6_(Mac)" can't be opened because the identity of the developer cannot be confirmed

    I recently purchased a download of Lightroom 6 from B & H Photo for my Macbook Pro
    .  When I attempted to open the download I got the following error message:  "Download_Adobe_Photoshop_Lightroom_6_(Mac)” can’t be opened because the identity of the developer cannot be confirmed."  What should I do?
    Downloading, Installing, Setting Up

    That's the Gatekeeper feature of your Apple OS X operating saystem kicking in.
    See Fix the “App can’t be opened because it is from an unidentified developer” Error in Mac OS X

  • I get the following error message when trying to instal in copy: "Creative Cloud Installer" can't be opened because the identity of the developer cannot be confirmed.

    I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.

    Mac Unidentified Developer Issue
    Here's how to open apps that apple should not be blocking: 
    http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

  • "Final Cut Pro Trial.app" can't be opened because the identity of the developer cannot be confirmed.

    Downloaded the FCP trial version from the Apple FCP site several times and still get the following error.
    “Final Cut Pro Trial.app” can’t be opened because the identity of the developer cannot be confirmed.
    Safari downloaded this file today at 1:34 AM from www.apple.com.
    Strange that Apple can't verify it's self.

    To get around that, go to system preferences>security & privacy>allow apps loaded from anywhere. Then set it back to whatever you wish after you finish the download.
    Barry

  • Trans. Replication failing -- "Cannot update identity column ..." -- unable to use sp_browsereplcmds to view statement

    All, I'm trying fix an issue with transactional replication where replication monitor is showing the push to the subscriber is failing because of the error, "Cannot update identity column."  I've tried to use sp_browsereplcmds to pull up the
    command that's failing based on the xact_seqno but when I try that I get the error:
    Number: 102, State: 1, Procedure: , LineNumber: 0, Server: , Source: .Net SqlClient Data Provider
    Message: Incorrect syntax near '┻'.
    I'd like to fix the issue without having to rebuild replication during a maintenance window.  I know you cannot publish tables with primary keys, but I'm wondering if dropping the identity column on this table might fix the issue.  I'm considering
    that but I would prefer to be able to pull the command that's trying to update the identity column, throw in SET IDENTITY_INSERT ON and remove the commands from the distribution database, but if that doesn't work I'm open to ideas of just dropping the primary
    key on the replicated table.  I think that should be fine.
    Does anyone have any recommendations on how to view the command that's failing?
    Or if dropping the primary key on the subscriber table would create issues with the publisher (since it is also the primary key)?
    Or, know of any other ways in which to address this issue?  Thanks.

    Unfortunately, no.  The error was a bit of a red herring.  In the end the subscriber was missing all of the stored procedures needed to update data in the published tables (i.e., the procedures for performing inserts/updates/deletes were missing
    for every table in the subscriber database).  Additionally, I could not recreate these stored procedures using sp_scriptpublicationcustomprocs
    because another procedure which was required for that proc to work was also missing. In short, there were hundreds of missing stored procedures in the subscriber database on which transactional replication is dependent in order to replicate DML changes and
    function normally and this includes system sprocs which would've been used to recreate the missing DML procs. In short, the subscriber was badly damaged and deemed to be unrecoverable within a reasonable time frame.
    The solution was to tear down and start over, which we did successfully later in the evening. 

  • "Adobe After Effects CS6" can't be opened because the identity of the developer cannot be confirmed."

    I downloaded After Effects CS6 trial. when I press on it , it says “Adobe After Effects CS6” can’t be opened because the identity of the developer cannot be confirmed." what should i do ?

    Mac Unidentified Developer Issue
    Here's how to open apps that apple should not be blocking: 
    http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

  • I am trying to open Lightroom 5 download package. I get a message "Download-Package" can't be opened because the identity of the developer cannot be confirmed. What do I do now?

    I am trying to open Lightroom 5 download package. I get a message "Download-Package" can't be opened because the identity of the developer cannot be confirmed. What do I do now?

    OS X Mavericks: Open an app from an unidentified developer

  • "Tried to Download_Adobe_Premiere_Elements_13_Mac 2" and received this error message can't be opened because the identity of the developer cannot be confirmed.

    “Tried to Download_Adobe_Premiere_Elements_13_Mac 2” and received this error message can’t be opened because the identity of the developer cannot be confirmed.

    That's Apple OS X's Gatekeeper feature kicking in. Nothing to do with Adobe.
    How to open apps from an unidentified developer in OS X Mountain Lion | iMore

  • Identity of the developer cannot be confirmed

    How do I installer a printer driver downloaded from hp.com when OSX says "HP Installer" can't be opened because the identity of the developer cannot be confirmed?

    Make sure it is from HP, not from some pretend site.
    Go to System Preferences
    Security & Privacy
    General
    and make change(s) there.
    Afterwards, go back and lock yourself up again.

  • "Quartz Composer" can't be opened because the identity of the developer cannot be confirmed.

    Currently, I cannot install the Quartz Composer. It says,   "Quartz Composer" can't be opened because the identity of the developer cannot be confirmed.
    Anyone please help solving this problem.
    Thank You.

    Hi,  I have the same problem...
    Only it is with the Text-Animation Application "Blender" which I downloaded from:
    http://www.blender.org/download/
    I Right Clicked to open, but still get the msg. saying:
    `Blender cannot be opened because the identity of the developer cannot be confirmed´.
    Anymore Tips that might help?
    The msg. comes from Core Services, any way to get this to verify the developer???
    Thanks!

  • My computer says the identity of the developer cannot be confirmed

    my iMac says "download Package" can't be opened because the developer cannot be confirmed
    How do i resolve this

    Mac Unidentified Developer Issue
    Here's how to open apps that apple should not be blocking: 
    http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

  • Since my last software update, I cannot stream netflix

    Please help. Since my last software update, I cannot stream Netflix movies. What is the solution?

    MichelPM is correct. Here's my experience.
    MacBook Pro  / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
    I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better.  Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG.   However, after much searching, I finally did the steps in order and it worked.  
    This was after repeatedly downloading Silverlight from the Netflix site without success.  So here's what I did:
    1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
    2. Followed the directions. I felt like such an idiot for not doing it right before.
    3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
        [also check your Libary/ Internet Plug-ins, but the above search is faster]
    4. Drag it all to the trash and empty it.
    5. Go back to the Get  Silverlight page and click on the Install on that page, not the Netflix site.
    6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
    7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
    8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay!

Maybe you are looking for

  • How do you configure an ipod in Windows format if you don't have a dirty PC

    Bear with me on this one! We've just got a new Fiat 500 and it says, to play the ipod through the in car system, that you have to configure the ipod as an external disc - done. Then it says: 'if the configuration has been made on an Apple, make the c

  • I keep losing my theme once I shut off computer or empty temporary files.

    I like my themes but I'm frustrated that I can shut off my computer for the night or run WinUtilities and my theme is gone the next time I get on. Any help on this? Also, since we started using FireFox, my windows keep disappearing at times including

  • How can I add a security password to an Airport extended network?

    I have an Airport Extreme network extended with an Airport Express and an older Airport Extreme.  Everything works fine as is.  I want to add a security password to the network but when I do, the two extending base stations appear in Airport Utility

  • Mail Button with alternate recipients

    I am a newbie to this (approx 2 weeks), but am gaining confidence with every step! I am designing a form that goes to clients, abd obviously a Mail button is required. However, the E-Mail address of the button can be one of 4 people, and the client c

  • Oracle Apps Clone Forms Error FRM-92050

    Cloned our Advanced Supply Chain Planning EBS Test environment in order to create our production ASCP EBS environment. Was able to clone and configure new production environment with no errors but when I log into the new environment when I click on a