SIM card not found message?

Since upgrading to the 2.0 software my iphone has shown the message SIM card not installed. I have had to reboot the iphone to reestablish the connection. Has anyone else experienced this?

I have the same problem, I tried to change to the official provider in Belgium (having bought the phone in USA) but that didnot help either...
The SIM card is working in a normal GSM....

Similar Messages

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!?

Sim Card Not Found

Each day at random times my phone goes out stating Sim card not found. i was hoping there was a fix in todays update but of course no update. i have been travelling so i cannot back up etc. I have done the reset, the hard reset, and plug into the electric cord, and eventually it does come back but i miss the calls, messages etc. which happen durring this period. What is the fix for this?

If it is an iPhone 4 it is on the side. Bend a paper clip, insert it into the hole, push and the tray will come out. Pay attention to how the microsim is seated and be sure not to bend or damage the tray.

Sim Card not installed message

I keep repeatedly getting a message that the Sim cardisnt installed- have to open the sim holder and close it every time.. happens 5-10 times daily.. what is causingthis? HELP.
My warranty has expired.. so trying to look at all my options and alterantives

try getting a new sim card from your carrier

SIM Card not Installed message after upgrade to 5.1.1

Hi
I recently unlocked my iphone from AT&T and itunes upgraded to latest software. Now my iphone does not recognize AT&T sim. Does anyone know how to fix it. Pls help as I have an officially unlocked iphone(after much wait ) and now can't use any other sim. Why it's always with iphones...

But I tried other international sim and it still showed same msg. I believe it's not problem with the sim. any issue with latest software upgrade?

Hi my phone5 says Sim card not installed.

i have been using my phone for 9 months. Now its saying sim card not installed whenever i go on the internet or switch on the 3G.
reinstalling the SIM card works but does the same when i use the internet again. i have changed the Sim card thinking the problem was with the card. but the probllem remains persistent. i have reset the network. that didnt work either. can anyone help plz?

Hello Abhihit9,
Welcome to the Apple Support Communities!
I found this article while researching the symtpoms you state here named iPhone: Troubleshooting a cellular data connection found http://support.apple.com/kb/ts3780.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Ensure that your software is up to date:
Check for a Carrier Settings Update. Tap Settings > General > About.
Check for an iOS Software Update. Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still does not, contact your carrierto report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
I know you have reseated and replaced the SIM card already so you can skip that part.
Regards,
Sterling

AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.

After an update, every time I start my computer (that uses 64-bit Windows 7), there is an AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. I have checked and tried suggestions to resolve this from this site and several other places with no success. Appreciate advice how fix and resolve this

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Suddenly I'm getting "out of memory" & "file not found" messages

in the last 2 days I have started getting, first, "file not found" messages @ autosave and also quit ... thereby preventing me from saving my changes .. I tried to "save project as" but the program wouldn't let me .. with the same message. Then an hour or so later my canvas window went red with a card that said "out of memory ... free up .. and it will redraw"
I'm running FCP 5.1 on 10.4.11 on a G5.
This is a feature film project .. lots of memdia on several firewire drives ... have 10-15% free space on them.
I'm lost, what gives? any help will be greatly appreciated...

Hi Chocolade1972,
>> Does the comparison i'm doing is right ? I want to compare one list index against other listi ndex.
I think you could use “Object.Equals” and the link below might be useful to you:
# Object.Equals Method (Object)
https://msdn.microsoft.com/en-us/library/bsc2ak47(v=vs.110).aspx
>> OutOfMemoryException: Out of memory
This error is very common, and when there is not enough memory to continue the execution of a program, it would be thrown.
It would be helpful if you could provide us a simple code to reproduce your issue.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Z30, sim card not detected

My Z30 just few months old, sim card not detect, can someone help? thanks a lot..

Hello,
Have you tested the SIM in another device? Have you tested another known-good SIM in this device? Is there an error message? Has it ever worked?
Let us know.

Help with Nokia E63 says SIM card not valid after ...

Hi,
I moved to France from UK and just unlocked my Nokia E63 with a code given to me by my UK provider Virgin. Phone is definately unlocked. My French provider (Lefrenchmobile) have given me a new sim. When I put in the SIM and turn on my phone I have to enter the SIM PIN, and do this and get an accepted message. Then phone says SIM card not valid, and won't do anything. What can I do? If I put my virgin SIM back in then it works fine.

Have you double checked if your phone is compatible with the new operator's network? Just simply tell the model to their customer services, they should be able to determine the compatibility.
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

I installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

i installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

That message occurs when updating a phone that was hacked to be used with your network. Upgrading the phone has re-locked it to it's rightful carrier. You will need a SIM from the original carrier to proceed.

Not able to view the Spaces home page; getting Page not found message

Hello All,
I seem to have a problem trying to access the Spaces Welcome page. I get a page not found message trying to access.
When I look into the logs -
[2010-07-08T08:32:32.137-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Factory Finder is already initialized, hence quitting
[2010-07-08T08:32:32.152-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Cannot locate the document 'oracle/webcenter/webcenterapp/extendingspaces/extending-spaces-properties.xml'.
[2010-07-08T08:32:32.347-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.spaces.search] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] MDS_QUERY: List size: 0, forAdmin true, isTemplate true, rowsRestricted false, Time Taken : 192
[2010-07-08T08:32:32.376-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Found the scope spacetemplate/Basic is viewable to authenticated role, setting the flag to true and returning.
[2010-07-08T08:32:32.402-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Found the scope spacetemplate/CommunityOfInterest is viewable to authenticated role, setting the flag to true and returning.
[2010-07-08T08:32:32.430-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Found the scope spacetemplate/ProjectSpace is viewable to authenticated role, setting the flag to true and returning.
[2010-07-08T08:32:32.431-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.spaces] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Templates Application Regions initalized Sucessfully. Templates list has 3 Published Templates list has 3Initalization took 277 ms
[2010-07-08T08:32:32.550-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.page] Relationship Service is already registered: oracle.webcenter.page, ignoring...
[2010-07-08T08:32:32.601-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.calendar.personal] Relationship Service is already registered: oracle.webcenter.collab.calendar.personal, ignoring...
[2010-07-08T08:32:32.611-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.calendar.community] Relationship Service is already registered: oracle.webcenter.collab.calendar.community, ignoring...
[2010-07-08T08:32:32.616-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.list] Relationship Service is already registered: oracle.webcenter.list, ignoring...
[2010-07-08T08:32:32.618-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.list.data] Relationship Service is already registered: oracle.webcenter.list.data, ignoring...
[2010-07-08T08:32:32.666-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.doclib] Relationship Service is already registered: oracle.webcenter.doclib, ignoring...
[2010-07-08T08:32:32.695-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.announcement] Relationship Service is already registered: oracle.webcenter.collab.announcement, ignoring...
[2010-07-08T08:32:32.714-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.note] Relationship Service is already registered: oracle.webcenter.note, ignoring...
[2010-07-08T08:32:32.727-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.relationship.url] Relationship Service is already registered: oracle.webcenter.relationship.url, ignoring...
[2010-07-08T08:32:32.751-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.forum] Relationship Service is already registered: oracle.webcenter.collab.forum, ignoring...
[2010-07-08T08:32:32.983-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.framework.service.EclipseLinkLogger] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] 2010-07-08 08:32:32.982--ServerSession(7507840)--PersistenceUnitInfo ServiceFrameworkPUnit has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored
[2010-07-08T08:32:32.986-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.framework.service.EclipseLinkLogger] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] 2010-07-08 08:32:32.986--ServerSession(7507840)--EclipseLink, version: Eclipse Persistence Services - 1.2.0.v20091016-r5565
[2010-07-08T08:32:32.989-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.framework.service.EclipseLinkLogger] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] 2010-07-08 08:32:32.989--ServerSession(7507840)--webcenter-oracle.webcenter.framework login successful
[2010-07-08T08:32:33.618-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.adf.mbean.share.connection.ConnectionsMXBeanImpl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Registering Connection Runtime MBean
[2010-07-08T08:32:35.174-04:00] [WLS_Spaces] [WARNING] [ADF_FACES-30163] [oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] The application is running with the new window detect flag off. It is highly recommended that this flag be turned on to ensure proper functioning of your application when new browser windows are launched. In web.xml set the context parameter oracle.adf.view.rich.newWindowDetect.OPTIONS to 'on'.
[2010-07-08T08:32:38.963-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.collab.forum.internal.model.gateway.ForumGatewayManager] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] oracle.webcenter.collab.forum.ForumException: no connections available for: Discussion Forum
[2010-07-08T08:32:39.435-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.collab.forum.internal.model.gateway.ForumGatewayManager] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] oracle.webcenter.collab.forum.ForumException: no connections available for: Discussion Forum
[2010-07-08T08:32:39.951-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.collab.forum.internal.model.gateway.ForumGatewayManager] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] oracle.webcenter.collab.forum.ForumException: no connections available for: Discussion Forum
[2010-07-08T08:33:10.320-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] Spaces request : #Request URL = http://192.168.0.140:1527/webcenter/spaces #QueryString = null #Encoding = UTF-8 #lang = null
[2010-07-08T08:33:10.321-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] Spaces request : #Request URL = http://192.168.0.140:1527/webcenter/spaces #QueryString = null #Encoding = UTF-8 #lang = null
[2010-07-08T08:33:10.633-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.jbo.uicli.mom.CpxUtils$Visitor] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] jar:file:/wbc/web_logic/user_projects/domains/kbace_domain/servers/WLS_Spaces/tmp/_WL_user/oracle.webcenter.framework.view/9rmhle/WEB-INF/lib/conference-view.jar!/oracle/webcenter/collab/rtc/conference/view/DataBindings.cpx
[2010-07-08T08:33:10.926-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.adf.model.servlet.HttpBindingContext] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] Application error handler: oracle.webcenter.webcenterapp.internal.view.error.WCErrorHandlerImpl
Any help would be appreciated on this.
Thanks in advance.
Nachi

Hi All,
I am facing this peculiar issue.
Post installation of webcenter, I can access the Webcenter Spaces homepage.
I log into webcenter as admin and configure a Mail Connection. I start and stop the Webcenter Spaces deployment. Now I don't see the Webcenter spaces Home page.
Error on page -
Page Not Found...
The page you requested is not found.
Click here to go to home
Click here to go to list of accessible pages
When I check the Logs on the server; I see -
#SEARCH_CRITERIA
#     START_TIME: 2010-07-29T05:12:22.740-04:00
#     END_TIME: 2010-07-29T06:12:22.740-04:00
#     MESSAGE_TYPES:INCIDENT_ERROR, ERROR, UNKNOWN
#SELECTED_TARGETS_LIST
#     /Farm_base_domain/base_domain/WLS_Spaces/webcenter:oracle_webcenter
[2010-07-29T06:09:27.910-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [host: kbace-hpbs0201.kbace.com] [nwaddr: 127.0.0.1] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000IcTfOu8Fw000jzwkno1CK78x00003V,0] [APP: webcenter] Factory Finder is already initialized, hence quitting
[2010-07-29T06:09:27.933-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [host: kbace-hpbs0201.kbace.com] [nwaddr: 127.0.0.1] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000IcTfOu8Fw000jzwkno1CK78x00003V,0] [APP: webcenter] Cannot locate the document 'oracle/webcenter/webcenterapp/extendingspaces/extending-spaces-properties.xml'.
#MESSAGE_COUNT: 2
Any light in this regard is much appreciated.
Thanks in Advance.
Nachi

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

I am getting a 404 not found message on my mac before the web page closes down

I am getting a 404 not found message on my mac before the web page closes down. How do I fix this?

Is it an internal or external web page? Does this occur on all web pages? If not, post the URL of one that 404s.

SIM card not found message?

Similar Messages

Maybe you are looking for