Sim card not installed, Sim card not installed
I purchase an iPhone 2 days back iPhone was perfectly fine using for tow day but sudenely today fist the carrier service gone than I restored the phone, the phone went to the original factory setting the phone is asking to restore factory setting I treied to restore the the setting through I tunes now the error comes no sim card installed
That's correct, without a supported SIM card you can't set up the phone.
If your carrier supports unlocking, you can use any SIM after your phone has been unlocked by the provider:
iPhone: Wireless carrier support and features
iPhone: About unlocking
Follow the instructions in this article to unlock your iPhone for use with different carriers.
Follow these instructions to initiate the unlocking process for your iPhone:
Check if your carrier offers unlocking. Only your carrier can unlock your iPhone.
Contact your carrier and request an unlock.You may need to meet certain requirements to qualify for unlocking. After your carrier submits the unlocking request, it may take up to seven days.
Once you receive confirmation from your carrier that your iPhone unlock has been processed, proceed to the next section.
If you have a SIM card from a carrier that is different from your current carrier, and you've received confirmation from your current carrier that your iPhone is unlocked, follow these steps:
Eject your SIM card and insert the new SIM card.
Complete the setup process.
If you do not currently have another SIM card you can use, follow these steps to complete the process:
Back up your iPhone.
Erase your iPhone.
Complete the setup assistant and restore your backup.
Additional Information
If you experience issues or receive the following error message displayed in iTunes or on your device, follow the steps below:"The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier store."
Restore your iPhone.
Contact your carrier to verify that the unlock was applied in your carrier's system.
Similar Messages
-
HT4972 my iphone is not installed sim card.so I can't update my iphone.
my iphone is not installed sim card.so I can't update my iphone.
That's correct, without a supported SIM card you can't set up the phone.
If your carrier supports unlocking, you can use any SIM after your phone has been unlocked by the provider:
iPhone: Wireless carrier support and features
iPhone: About unlocking
Follow the instructions in this article to unlock your iPhone for use with different carriers.
Follow these instructions to initiate the unlocking process for your iPhone:
Check if your carrier offers unlocking. Only your carrier can unlock your iPhone.
Contact your carrier and request an unlock.You may need to meet certain requirements to qualify for unlocking. After your carrier submits the unlocking request, it may take up to seven days.
Once you receive confirmation from your carrier that your iPhone unlock has been processed, proceed to the next section.
If you have a SIM card from a carrier that is different from your current carrier, and you've received confirmation from your current carrier that your iPhone is unlocked, follow these steps:
Eject your SIM card and insert the new SIM card.
Complete the setup process.
If you do not currently have another SIM card you can use, follow these steps to complete the process:
Back up your iPhone.
Erase your iPhone.
Complete the setup assistant and restore your backup.
Additional Information
If you experience issues or receive the following error message displayed in iTunes or on your device, follow the steps below:"The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier store."
Restore your iPhone.
Contact your carrier to verify that the unlock was applied in your carrier's system. -
i installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me
That message occurs when updating a phone that was hacked to be used with your network. Upgrading the phone has re-locked it to it's rightful carrier. You will need a SIM from the original carrier to proceed.
-
My brother send iPhone from USA to India
iPhone 4 already unlocked from the apple website
Not using jailbreak system
But when I install SIM card it displays no service
What I have to do for this solutionGauravpatel00045 wrote:
My brother send iPhone from USA to India
iPhone 4 already unlocked from the apple website
ONLY the Carrier that the Phone is locked to can Unlock it.
Gauravpatel00045 wrote:
... when I install SIM card it displays no service
What I have to do for this solution
Please see the More Like This section on the right. -
Can Siri work with only wifi without installing SIM card in it?
Can Siri work with only WiFi without installing SIM card in the iPhone 4S?
I am seeking to use the siri from my newly bought iPhone from USA where i am staying here for vacation around 2 months . I will be installing the SIM card not in USA , where iwill be back home 2 months from now. Can it work with only wifi on it
-
i have installed sim card but while settinng up ios 5.1 when i chose connect to itunes after some time it shows no sim card installed
qaziahmad2010 wrote:
i have iphone 3gs i restored it and now it is not activating ...
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks
If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone? -
I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem
I assume that you have installed new RAM in your MBP.
It would be helpful if you indicated the EXACT model/year MBP that you have.
What the the RAM specifications that you are trying to install?
Ciao. -
Installed graphics card does not support the opengl features recommended
I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick -
I have paid Bell to unlock my old iphone4 and they have said it is now unlocked. Can I skip the back up and restore process and just buy another carriers sim card from my daugther Kodoo plan, install it and active the iphone4 on itunes account in her name?
thanks
DaveThe process is as follows:
Backup the phone, Erase it, connect to iTunes for the unlock process, then your iProfile can be restored.
You can go ahead and get the SIM, bout you have to Erase the phone and connect to iTunes before it will be unlocked. -
when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanksIs the English sim from the original carrier as that is usually the message you get with a carrier locked phone.
-
Serial Number not on Sim Card tray
Serial Number Lookup:
I have an iphone 4 that will not charge, and is dead. I know the serial number is supposed to be on the Sim Card Tray, but it is not. I can't even do an Apple Chat if I don't have my serial number. I have all of my appleID password, phone number information. How do I get my serial number?s also under general settings about ive had 2 find mine try it
-
Iphone not recognizing SIM card
Since I bought my Iphone about 5 months ago, a few times it would say that there is no SIM card inserted, when in fact there had been one. I would remove and reinsert the card or do a hard shut down and restart and the problem would go away. Yesterday, as I was scanning my applications a error message came on saying it did not recognize a network. Then I noticed the functions on would not work. Basically it froze. So I restarted it. Once the apple logo went off there was an icon of a USB to be connected to iTunes, with no other functions working. I then patched it to my laptop and the error message on the laptop said that there was no SIM card in the Iphone. thinking its a SIM card problem I inserted someone elses SIM in my iphone. Same problem. I inserted my SIM in another iphone. No problem. It was not a SIM card issue. Without the iphone recognizing the SIM card the phone could not even be reset.
I took the phone to the Service provider in Malaysia MAXIS. They said the iphone is defective and had to be taken in for repair. The problem is they will most probably replace the phone, However there policy with Apple they say is that I have to WAIT 6-8 WEEKS for a new set. How ridiculous is that?
The worry I have now is that all my apps that I bought, what will happen to them? All the online games that I have been leveling up for months, what happens there? I could never sync my phone with my laptop when it came to the apps. It just would not sync!
It is disappointing to think that Apple does not have a solution to customer software and program issues.Naeim G wrote:
I took the phone to the Service provider in Malaysia MAXIS. They said the iphone is defective and had to be taken in for repair. The problem is they will most probably replace the phone, However there policy with Apple they say is that I have to WAIT 6-8 WEEKS for a new set. How ridiculous is that?
You're right - it is ridiculous however thats not a decision made by Apple, but by Maxis. If Apple were asked to rpovide immediate replacements, they would do so and Maxis would have to pay the price. Under warranty, in other countries we can go into an Apple store and get an immediate replacement. -
i have problem with my iphone, it;s never lock and not read sim card, before reinstaling 6.01, thnx juliany
If you are both on the T-mobile network, the sim card should work. If you did a Erase All Content and Settings, then she should be at the point of activation as a new device...talk to T-mobile and be sure the sim she is using is a valid sim card.
-
any ideas of what to do?
How do you know the problem is the SIM card?
If you really believe it is a corrupted SIM card you need to get a new SIM from AT&T. Apple does not provide new AT&T SIMs.
Take the iPhone to AT&T and have them check it out. -
After updating to lion installed graphics card does not meet minimum requirements for aperture
Hello,
I updated to OSX lion yesterday. and Apterture is given me this error message. "The installed graphics card does not meet the minimum requirements for Aperture. I tried the Option Command Open app thing to try rebuild the database. But nothing happens when I try opeing the app using those combo key's So I removed the app using mackeeper and tried reinstalling it. still same issue.
I have following machine
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B0E
SMC Version (system): 1.69f1
Serial Number (system): C02F94ETDMGG
Hardware UUID: 132AE53D-0766-5E17-9F54-ED935D6F7AB3
Sudden Motion Sensor:
State: Enabled
Chipset Model: AMD Radeon HD 6750M
Type: GPU
Bus: PCIe
PCIe Lane Width: x8
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6741
Revision ID: 0x0000
ROM Revision: 113-C0170L-521
gMux Version: 1.9.23
EFI Driver Version: 01.00.521
Displays:
Color LCD:
Resolution: 1680 x 1050
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
VX2245wm:
Resolution: 1680 x 1050 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: QD0064002266
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Apple Mini DisplayPort To VGA Adapter
Adapter Firmware Version: 1.03
Display Connector:
Status: No Display ConnectedHAve you tried disconnecting the external monitor rebooting and then runnig Aperture?
Maybe you are looking for
-
URGENT: Problems with the CREATE JAVA command in SQL
I am trying to publish a Java class to the database and have to use CREATE JAVA rather than loadjava for reasons I won't go into. However, I get the following error: SQL> create java class using bfile ('C:\neil', 'SkyNetworkRequestUtil.class'); creat
-
Acknowledgement File receiver adapter
Hi KP's, Is there a possibility to send an acknowledgement when the file adapter has processed the file succesfully or is there a possibility to send an error message when the file adapter has failed to process the message (when he is not able to pos
-
Web service error in response "Element '{ namespace }return' missing"
Hi all, I'm quite new to ABAP development on Web services, and I encountered a problem after calling a web service method. I created a Service Consumer proxy from an external WSDL, then created its port in SOAMANAGER. Now, when I call one of its meth
-
Can i get any free version of Photoshop ?
I wanted to know whether you provide any free old version of photoshop. Thanks Saheem Moosvi
-
It appears multiple calendar syncing was an afterthought
Other than the fact that the colors of calendars are incorrect when synced via a cable to your mac there exists another problem that is inherent to everyone, even if you use MobileMe, in that once you create an event in a calendar on your iPhone you