SIM card registration error after SW upgrade

Hi
After I upgraded my Nokia 6110 Navigator to SW 4.22 I get insert SIM or SIM card registration error. It happends approx. once a week. Before I upgraded my mobile it never happend. Why?
BR / haav

This is often a problem with the SIM itself. That it started showing just when you did the firmware upgrade could be coincidence.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

You didn't buy an 'unlocked' iPhone 3GS - you bought a 'hacked' one.
Updating to iOS 5 removed the hack and the unofficial unlock.
All you can do is try to find out which network the phone is locked to and ask them if they can unlock it properly.
Otherwise, sell it or throw it away and buy an officially unlocked phone from an official source.

N78 Persistent 'Sim Card Registration Message'

I have scoured the internet for answers on this problem, and i cannot find anyone with the same problem as me, so hopefully one of you could shed some light on this problem;
I recently purchased the N78 from my sister in November-ish of last year, it was a SIM free one, so i was able to put my Three (3) SIM card in (She was recently on 02 if that helps) it worked fine for say, about a month maybe, until the message 'SIM card registration failed' kept appearing, i just ignored this for a while as i presumed it was something to do with it being on 02 for a bit. after a few more weeks it kept appearing more and more, at that point all the signal bar went to 0 and i couldn't make or receive calls, unless i switched it off then back on again, after that it worked fine, and i was able to call and send/recieve texts (until the message appeared again). After a few more weeks this kept happening more and more and I kept missing important calls and texts (as I did not know when it would happen, it just happened at random intervals)I contacted 3 about this problem, and they said it was due to the faulty SIM card, so they sent me a new one, which worked for a while, then the same thing happened again. So I eventually gave up using this phone altogether, and used it solely for the connection to wireless internet and for the music player, which both worked fine.
Yet, earlier I attempted to put my SIM card back into the phone and it stopped working altogether, the message appeared all the time and i could not make a call or send a text whatsoever.I put the same SIM card into 2 different phones, and it worked fine, except my old Nokia 6288 'SIM Card Registration Failed' kept coming up, and has done for quite some time, but it didn't interfere with sending texts or making calls at all.I put a different SIM card into the Nokia N78, and it works perfectly fine, the message does not appear!
So, in short i cannot use my SIM card in my N78, but i can use it in other phones, yet I can use other SIM cards in this phone with no problem.
Any help at all would be greatly apprecaited.
Message Edited by jessicaa on 11-Apr-2009 04:11 PM

sees like you have had exactly the same problem as me. my second-last phone was a 6288 and after about a year of use, I had that SIM registration failed message come up. had nothing to do with my network (i am on 3 Australia), and i am sure it was just the firmware of the phone playing up. i just ignored it and restarted the phone when i had to. after a while, it went away. I haven't had the same problems on my N78 that i purchased about six months back, but if you have early firmware version on your N78 (say the original 10.136, 11 or 12.046(, I would suggest seeing if there is an upgrade for your phone. there should be, as 20.149 and 21.002 has been rolled out pretty recently. I am still with 3 and haven't used any other network's SIM card so can't vouch for the experiences you have with other network providers. But as happened with 6288, i don't think its the SIM card or 3 or O2, i think its the phone itself.
if you can't find a firmware update for your phone via NSU or FOTA, then take your phone to a local Nokia Care Centre and they'lll be able to upgrade your firmware for you. hopefully it all goes well for you , tell us how it all goes.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

'SIM card registration failed' on Nokia 6300 - fin...

I have two Nokia 6300 phones (I know, they are pretty old now, but there's no point me switching them while these still work!). I had one with me when I worked in New York and it worked fine out there with a US pay-as-you-go SIM card. The other one I saved to use in the UK when I was here, and it has a UK pay-as-you-go SIM (Tesco). I have now moved back to the UK and want to use both phones with my UK SIM card, however the one I used in America says 'SIM card registration failed' and won't find any reception when i put my SIM card (or any SIM card) in to it.
I'd be extremely grateful for any help/advice people can offer.
Thanks!
Melanie

30-Oct-200707:34 PM
gugs86 wrote:
i have a nokia 6233 it was on 3 before and just recently i had it unlocked well 2 days ago now its saying sim card fregistration failed on 02 and 3 but works on other networks so i did a software update from nokia website and now it says sim card registration failed on all networks can somone please help me
card registration failed means it has been locked out by the service provider
Did you buy the phone NEW?? is so take it back they will exchange it
If you bought it used chances are who ever sold it has reported it lost or stolen or It was stolen before they sold it
I had this on a Brand new N95 which was exchanged by the shop some one had either Palmed it while looking in the shop or just stolen the ID from it
Nokia user / modder since Nokia Orange and Mobira user too before that

SIM card not recognised after upgrade to latest IOS apple staff helped reboot lost very treasured photos then backed up compt before trying to find them so say have overwritten back up so now lost forever Is this true Sim blamed on hardware ? True

I have a DM*******FJ3 iPad
I put a SIM card in it and it worked beautifully
I went away the sim does not work abroad and updated the management programme while away
When I came back the sim wouldn't work and when rebooted after update an error message no SIM appeared and it has been there since
I booked an Apple review at the shop in lakeside they were unable to find a fault said it was a hardware problem and I would need to buy a new iPad
I then phoned apple apple help who talked me through a reset
At the reset a lot of photos of the birth of my granddaughter went missing the albums they were in was missing
I then booked an appointment at Genius Bar in covent garden
They backed up the computer on arrival
Their conclusion was the photos lost forever as the back up had overwritten the backed up photos that hasn't downloaded properly when reinstating backup
The pins in the iPad drawer for the sim are broken and I need a new iPad
Apart from being furious that despite apple knowing the problem was about lost photos they have by their actions lost them
The sim stopped working without the drawer being opened
The only people to open the drawer since it stopped working are apples employees so if pins are broken apple has broken them and still haven't identified the more likey software problem that stopped the sim working as it happened afte an update
It is impossible to visualise the pins in the SIM card slot I have tried with an ophthalmoscope and can't see them so how an Apple employee can see with his naked eye is beyond me
This seems to be a problem with this iPad as the net is littered with problems regarding this fault so I'm sure Apple know about it
My friend with a company use of these iPads has had several develop this problem and they have been replaced as staff have admitted to him it is a known fault
Wy should so done have one level of truth compared to another
Staff should not lie just to get someone out of a shop if they really don't know the answer
I feel I have highlighted several staff training issues and would like some reassurance that action is being taken about this don't seem to be able to find a way to complain to Apple Anyone know how?
There is an obvious problem with the SIM card comparability in this iPad I believe a software problem and would to know if it is actually being addressed and when a new update comes out will it ever work again or do I really have a useless piece of equipment now?
Are my photos really lost as staff have been useless at everything else I can't help but hope they don't know a retrieval route for this either
Any help very grateful
<Edited By Host>

Actually, I'm sorry. I just re-read your post and you were certainly clear. I somehow got it in my head you set up the new phone from iCloud backup.
Since you've had the phone one week (I hope I got that right at least?) you are entitled to technical support directly with Apple. I'd either call them (1-800-MY-APPLE) or schedule a meeting at the Genius Bar at your Apple Store. I'm sorry I can't be more helpful.

ITunes error message SIM card not supported after hard restore

Decided to do a Restore of iPhone 4 after several unresolved issues. Everything fine until reboot when iTunes tells me that the SIM card is not recognized. I have found numerous posts and discussiopns about this; I have removed SIM card, restarted, re inserted card, reset phone all to no avail....do I really need to buy a new SIM card?

Was the phone purchased new in the US from either Apple or AT&T? If not it is locked to some other carrier and there is nothing you can legitimately do about it.
If you DID buy it new from AT&T or Apple the phone is broken; you will have to contact Apple for replacement. If it is less than a year old this will not cost anything. You can check warranty status here: https://selfsolve.apple.com/agreementWarrantyDynamic.do

SIM card not supported after upgrade OS

I bought iPhone in Hongkong & use it in Jakarta. Originally iPhone worked well with SIM card of Telkomsel/XL, but few days ago I downloaded & installed upgraded OS ver 1.1.4.7 from internet and the result is my iPhone cannot work since the SIM Card is not supported anymore. pls help me resolve this.
Djend

All the iPhones sold in Hong Kong are hacked. Once you done the Restore, it would loss the unlock SIM function.
Hope the iPhones can officically launched early in Asia.
Message was edited by: Mitch 751

No sim card installed error on itunes, noservice on the phone.

am using iphone 3gs version 4.1.. now tried to upgrade it to iOS 6, trieed to download and install through itunes. After updating am unable to activate the phone, as its saying connect to itunes to activate. When I connect it to itunes its showing the error message like "THERE IS NO SIM CARD INSTALLED IN THE IPHONE YOU ARE TRYING TO ACTIVATE".Please can anyone help me get out of this. I am using this mobile in India.
I appreciate the support..Thanks
Koushik.

Reset, hold together Home and Power buttons for about 15 seconds until by itself iPhone turns off and then restarts. If this does not work, toggle on and off Airplane mode, obviously leaving it off. If this does not work, click icon Settings>General>click at bottom Reset>Reset Network Settings. If this does not work, use paper clip to slide out SIM Tray, and then carefully slide it back in.

SIM card not valid after update

I updated to the iOS5, then I hooked up my NON-jailbroken 3GS. After "updating" everything this message appears:
The SIM card inserted in this iPhone does not appear to be supported.
I took my phone to my carrier, AT&T, and they cleaned the SIM card, didnt work. They replaced the SIM card, it didn't work. Tried to restore my phone, didn't work.
Any advice?

Just to make sure it wasn't a PC/Mac issue I have tried the following on each of 2 different windows PC's and a Mac & a MacBook Pro:
New installation/download of the Software update for iPhone 4, and each time putting the phone into recovery mode. I have also been using a new micro sim from O2 - obtained first thing this morning.
You do the maths on how much time this has taken, and guess what it still doesn't work....!
This has to be the most direct way of getting someone to upgrade to a new phone - the day before a new iPhone comes out - coincidence.......hmmm.
Just as a point of interest the iPhone was replaced in May this year, so is relatively new.
I do find it had to believe that there is no word from Apple as to the reason &/or a resolution.
COME ON

Sim card not supported after unlock iphone 5c

iphone 5c, 12.7 GB, version 8.1.1, after unlocking when i connect it to itunes w/ other sim, sim card not supported error registered,. i check it to IMEI and its unlock, but why icant use it? I try to restore to itunes and erase my iphone nothing works, what can i do?

How was the phone unlocked? Was it unlocked by your previous carrier? The only way to unlock your phone is to have your previous carrier unlock it for you.
If you phone was unlocked in any other way, this constitutes hacking or jailbreaking and your phone will not work with another sim card.
Get the phone unlocked properly by your carrier and there is no reason why it should not work.

Report giving error after 10g upgrade

We have a custom report which is erroring out after 10g upgrade. Following is the log file-->
**Starts**24-APR-2009 04:11:21
ORACLE error 3113 in FDPSTP
Cause: FDPSTP failed due to ORA-03113: end-of-file on communication channel
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P
APP-FND-01564: ORACLE error 1000 in AFPGRG
Cause: AFPGRG failed due to ORA-01000: maximum open cursors exceeded.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
Start of log messages from FND_FILE
End of log messages from FND_FILE
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P.A
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected to ORACLE
Contact your system administrator or support representative.
Shutting down Concurrent Manager : 24-APR-2009 04:11:51
ORA-01041: internal error. hostdef extension doesn't exist
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01041: internal error.
hostdef extension doesn't exist
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
_ 3 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []
I already increased the cursors from 700 to 900
How to fix it?

Hi,
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []Refer to the lookup to get more details about this error.
Note: 153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=153788.1
I already increased the cursors from 700 to 900
How to fix it?Is it possible to increase OPEN_CURSORS to a higher value? Enable trace on this concurrent program, and see if this collects more details about the error.
Regards,
Hussein

Finding: Incorrect SQL throws a random error (after 2005 upgrade)

Hi I thought that I would share an experience that we found after upgrading a system to 2005:
Due to the upgrade of SBO, one of our addons didn't work properly after upgrading it to 2005. Basically the code would break in random places (while stepping through it in the Development Environment).
After some time we identified the error was being thrown because a sql query we were using was incorrect due to the changing of the DB structure in the upgrade. The weird thing was that it didn't throw an error at rs.DoQuery(query) but actually would step into the recordset and then the addon would suddenly stop working - hence the reason it took a while to identify it was the sql causing the problem.
Anyway updating the sql fixed the problem, but if anyone else is finding strange behavior whilst trying to identify why an addon might stop working after an upgrade, you should check any sql being used is still correct....
Daniel

The first versions of SBO2005A SDK (PL00 to PL04) was the say the least VERY buggy... PL05,06 and now 07 seem to get things under control... Any rampup version of 2005 should at least get up PL05 ASAP... I didnt have many problem with the SQL, but "Server produced an error was a very common error".. my problem was primarily in matrixes (add/remove of lines), itemevent (pval internal COM error) and the dangerouse UserTable error due to currupted object in it....

Jco call rfc throws error after WAS upgrade sp15

Hi all.
When 2 days ago, our WAS engine version is sp14.
And we have one application using jco library to connect to SAP R/3. It works well.
After we upgrade WAS to sp15.
This function throws out the error.
Umrechnungsfaktor konnte nicht bestimmt werden
Is there anybody can help me ? Its very urgent !

Hi
A)Go to adming page http://<localhost>:<port> >>click Web Dynpro >>Content admin >> create, maintain, test Jco and also you can Test the SLD connection too
B)If you are using any JDBC driver,Check your JDBC driver is registered. or else you have register it
1. Start the Visual Admin tool
2. In the tab Cluster, open the node of the server you want to check.
3. Open the node Services under the server you want to check.
4. Click on the entry ClassLoader Viewer under Services. 5. The components are displayed in the right window. Open the node Applications in the right window.
6. Look for the entry sap.com/com.sapportals.connectors.database and click on it.
Under sap.com/com.sapportals.connectors.database, your JDBC driver should be available
Cheers
Jawahar Govindaraj
PS: Reward points

External command Cpic error - after V5R4M5 upgrade

Hi,
We are getting an error when we try to run external commands - Exception raised: PROGRAM_START_ERROR - The problem started after we upgraded the OS to V5R4M5. We are running R/3 45B. kernel patch 994.
SAPXPG JOBLOG: I see the following error MCH1210
QCPFMSG
MESSAGE-
Receiver value too small to hold result.
I could not find a new version of sapxpg for 4.5b_ext. I
Regards,
Brian

Never mind I found note 976837 that resolved the problem
Regards,
Brian

IPhone 5 Sim card when using different line upgrade

Since I am not due for upgrade I used my husbands upgrade to order new iPhone so the sim card will be programmed with his number. I know I can just buy a new sim card for me to use but would it be possible they can just send out the new one with my number because it would be just a waste for them to send out in his number? If so, would I contact Apple or AT&T?

You need to contact AT&T.

SIM card registration error after SW upgrade

Similar Messages

Maybe you are looking for