SIM Failure and No Service

Just trying to see if there's a fix for this.
Several months ago I was having this problem, it went away and now it seems to have surfaced again.  It started this past Saturday and I'm not sure why or, what to do about fixing it.  My phone will sporadically display the message 'SIM Failure' and then where the Verizon logo and signal bars are, 'No Service' is displayed.  If I power down and restart the phone, it does 'Searching' a bit before finally showing he bars and VZN logo.  Sometimes it will maintain that for an hour or so before another SIM Failure message, sometimes, I immediately get the message and have to restart my phone over again.
I didn't think these VZN iPhones had SIM cards, I thought we were CDMA or something like that.  I've had the phone since February so I don't know if this is a device issue or a software issue and I'm trying to figure out if I should try to return it before my 1 year warranty thing is gone.
I'm on 6.0.1 (10A523) version of iOS so I believe I'm current as far as updates to the phone go.
Any help/information/guidance would be greatly appreciated.

    It sounds like both of you have tried some great steps to research what's going on with the SIM errors on your iPhone 4s devices. The Version 6.0.1 (10A523) is the most recent software from Apple. And although you don't use the SIM on the Verizon Wireless CDMA technology here in the United States, the iPhone 4s come with the awesome capability to use a SIM card for global GSM services too. Which is why you're seeing messages about a SIM. You can check out http://bit.ly/zXnl81 to see where the SIM is on your phone and how to remove/reinsert it to try to refresh it's connection to the phone.
There's also a wonderful support article from Apple at http://support.apple.com/kb/ts4148 to help with every step you may need to take to resolve random SIM errors on the 4s. Many times just removing and reinserting the SIM will do the trick, but Apple also includes steps on how to restore your phone to ensure the error messages stop.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Similar Messages

  • IPhone 4s and Sim failure and No service issue

    Ok,
    Few days back I asekd questions regarding few other issues with iPhone 4s. here is it, https://discussions.apple.com/message/17068754#17068754
    Few gentlemen told me, to replace sim card. Here is what I did,
    1) I am from India. I was using Vodafone 3g micro sim. Everyday, 4-5 times in the ideal mode I got messages like Sim failure and invalid sim. I have to restart my iPhone everytime. Then only it was working.
    2) I posted the question, people said its my card problem
    3) I bought new BSNL 3G micro sim card for iPhone. I inserted the card and got 3G working.
    4) After 3 hours, I saw No service message. I waited for some time, i went to outside to see if it was a network issue. Nothing changed.
    5) I rebooted my iPhone, it immediaetly picked the network.
    6) After few hours, again it lost and said no service.
    7) I then didn't rebooted it.
    8) In the morning,  I saw Sim Failure and invalid sim message. Useless
    9) I now rebooted and Sim is working with 3G network.
    Now please ,
    is this iPhone issue? It is for sure. I am tired now. Battery is dying and with this Sim Failure and No service, I am totally disappointed.

    Hi Ahelpyguy...
    I read all your messages above , I am facing the same problem as u faced.
    My Iphone 4S and it was working fine (5.0) until i upgrade to 5.0.1(9A406).
    Now I am facing alot of network issues.  I get messages liek NO Sim , SIM FAILURE. 
    I even restored the sowftware from ITUNES but i am still facing the same problem.
    I was using Vodafone first but I heard that due to problem in micro sim reader of Iphone 4s i shd use a 128 K or 64 K sim.. Since only Airtel provided 64K sim ...I installed that in my phone. But still i am facing the same issue.
    I would appreciate if you can tell me whats Tweaked version of 5.0.1.
    the current software installed on my phone is 5.0.1 (9A406).
    Thanks
    Prateek

  • My iphone 4, sim failure and no service

    I just replaced new Iphone 4 last week in Apple store, Chadstone and after 3 days, it says sim failure and no service suddenly. I tried many times, switched off and on but still says no service. Do you have any ideas and solution please.

    Hello, I have been having the same problem which seems to have occurred out of the blue. I pay my phone bill on time and as far as I know I haven't used up all available space. Sprint service can be problematic but this time the Sprinters were not responsible. To be honest I can't tell you why this occurs. I can tell you how to fix it :) just reset your phone (first reset the settings and if that doesn't work, restore the phone to factory settings). If this does not clear your problem you should talk to your service provider. I just reset my phone's settings but 30 minutes ago, and BAM all's well again. :) lets hope it lasts ;) good luck.

  • My iphone 4s constantly goes to sim failure and no service!

    My iphone 4s constatlly goes to sim failure and no sevice what does one do ? Called verizon and did a restore but did it again six hours later, help !
    Really disappointed in apple !

    Before getting all pouty, why don't you bring your phone into Apple for evaluation.  If found to be defective, it will be exchanged.

  • HT1430 what happens when i always get sim failure and loosing service and get sim Failure

    im always getting sim failure on my phone and always loose service

    First step would be to go to your wireless carrier and get a new sim.
    If that does not work, post back with the exact wording of any error
    messages you get when new sim is in the iPhone. Also post what
    it says when you look at Settings=>General=>Carrier.

  • My iPhone 5 keeps saying sim failure and invalid sim I need help please!?!?!

    I really need help I just got my iPhone 5 yesterday and its telling me "sim failure" and then "invalid sim" shows up on the top left corner. I had an android before so I didn't need a SIM card so I went to apple and they gave me one and them went to sprint to activate my iPhone to my number but it still shows those annoying messages!!!

    this is my second nano sim and i made an appointment at apple and they swapped my iphone for a new one and still the same should i call customer service? its getting me so ****** cause i have to pop the sim slot everytime it tells me sim failure so it can go back to normal then in 5 mins it shows up again

  • SIM Failure contact your service provider?

    I have a newly purchased Dell E6420 with the DW5800 4G (LTE-3G) Mobilebroadband card embedded. I downloaded and installed the VZ Access Manager  Version 7.6.6.5 which applies to the installed card.
    While activating I am getting a SIM Failure contact your service provider. Help....

    Hello A1AJake! I can help get your embedded card activated. It's best to start by reviewing your account. I'll need you to send me a personal message through the VZW forum. I'll need your full name and mobile number in order to assist. Thanks!

  • My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about?

    My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about?  Any ideas on how to resolve this.

    Looks like the Sim card had a catastrophic failure. Burnout, short somethng like that.
    You can try to take out the tray and reseat the sim card inside and see if that gets it back.
    Also try resetting the phone at least once by holding down the home and power buttons until the Apple Logo shows up.
    If none of this works you'll have to contact your cell carrier to get a new sim card, as it probably fried and is no longer functional.

  • IPhone 'SIM failure' and 'invalid SIM'

    My iPhone 4 with Bell mobility was working just fine. I put it down and when I came back an alert saying 'SIM failure' appears and then instead if my carrier in the corner, it says 'invalid SIM'. Should I take my phone to Bell to get my SIM replaced or go to apple? And is this a hardware problem?

    Try removing and re-inserting the SIM. If that doesn't fix it, get a replacement SIM from Bell.

  • İphone 4s sim failure and connection losing?!

    this thing gives a sim failure once or twice a day and it losts its connection restarting is a temporary fix but i hate this. version 9a406 please help me!

    Apple released the iOS 5.0.1 (9A406) build to address this issue. Have you tried that as well?
    http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html

  • TS4148 Hello  I have a new iphone5 and I did the new update last night and now i'm getting SIM Failure and my pnone won't work unless I turn it off and on again.  I never had this probelm before.  Please advise.

    My phone is saying SIM Failure after I did update last night.

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • Commercial power failures and FiOS service interruptions

    Severe weather reminder for our FiOS customers...
    In the event of a commercial power failure, your FiOS battery backup will power your standard voice service for approx 8 hours. For additional information about the battery backup unit, click here for more info.
    It’s possible that after electrical power is restored, you may still be without FiOS TV service. Sometimes resetting your Battery Backup Unit (BBU) is needed. Click here for more info.
    For an automated wizard to help with FiOS restoration, click here.
    Due to extreme weather conditions, there may be storm related power outages in your area.  Your FiOS services will be affected until power resumes.  If you do not have power please contact your local power company.  If your power is restored and your FiOS services are still not working, you can report an outage, check status, request a new repair or update an existing repair online at www.Verizon.com/repair .  If some of your Verizon services are working, but not all, you can use the In Home Agent application on your PC to troubleshoot and restore services.   We apologize for any inconvenience.

    when you lose power, the BBU kicks in, and after  minute or so, the video and data ports will be shut off at the ONT at your house to save battery power.... the battery is ONLY for the phone
    In the event that the Verizon CO lost power/signal and you truly had no signal coming to your house.. then all services would go down
    Bob Robertson - Lighter Klepto - I steal lighters, not bandwith

  • I keep Getting SIM failure and SIM Locked. I keep terying to restore, but there is no use

    HELP!!

    Try taking the SIM out and reseating it.  Maybe it is a faulty sim.  Try another known working sim

  • After unlock my iPhone 4 iOs 6.0.1  is not accepting any sim , i tried using new sim  first it shoes no service then sim failure and invalid sim . what should i do do make it work

    after inlocking  my iPhone 4    iOs 6.0.1  it shows no service when i used a new sim .

    If it is showing invalid SIM error, then the unlocking is not complete. Depending on what carrier authorized the unlock, most require the phone to be restored before the unlock is complete. Once you restore, you should receive a message stating Congratulations, your phnoe is unlocked. Then you restore the  backup of the device from before the unlock restore.

  • Receiving error message "Sim Failure"  on iPhone 4S now no service.  any advice?

    receiving error message "Sim Failure" on new iPhone 4S now no service.  any advice?

    hi guys,
    i recently bought a new iphone 4s factory unlocked. in order to avoid sim failures and invalid sim errors or No service errors, Each phone has to be unlocked by connecting it to the Itunes.
    Kindly follow the below steps to avoid any SIM card conflicts
    iPhone FULL Unlock - How it Works:
    -Connect your iphone to itunes without any network sim inside and when connected click on the iphones name.
    - Click Restore install latest version of iTunes on your Pc or Mac or click check for updates
    - Let itunes Backup your phone and then Flash to the Latest Version.
    - Now disconnect phone and reconnect after 10 seconds.
    - Now Enter another network simcard that's not the same network its locked on to
    - Connect phone to iTunes with not accepted (not valid) simcard
    - Wait until iTunes detects the phone
    - iTunes will display (Congratulations, Your iPhone is now unlocked)
    - Phone Unlocked
    - just follow the instructions about activating the Iphone.
    and iphone is unlocked
    NOTE : This is the only FULL LIFE TIME UNLOCK solution for Apple iPhone as the IMEI is registered as UNLOCKED in Apple database.
    This solution should be used ONLY THOSE WHO BOUGHT FACTORY UNLOCKED iPHONE 4S.
    Your phone will always be unlocked even after each new update of your phone firmware !
    All reasons given like bad IMEI series, manufacturing defects etc blah blah are not logical as everything was tested before every sale.

Maybe you are looking for

  • How to view multiple output parameters from web services

    I have used the Labview tool to create a .NET assembly from a WSDL file. In the WSDL file the service has been defined to return 2 output parameters. In Labview, when I invoke the method for this service the first output parameter ends up as the retu

  • Billing output to IDoc & reprocess the IDoc in same sys. to post FI entry

    I have a requirement to send the billing output to IDoc, read the same IDoc to post a FI entry but to another company code. Please suggest how can this be acheived, and is there any other alternative to acheive the above requirement. Thanks in advanc

  • Button calls function

    Hello ,I have very simple problem as      public class chart extend Applet           draw d;           plot p;           �.           p s v main(�)           Frame f =new Frame();           �.           class draw extends Panel           chart ch1;  

  • Shipment cost doc calulation problem

    Dear All, I am facing problem while creating shipment cost document, its not calculating at all. what I observed is the subitem is not getting created and its is throughing V0104 error message: Requested function B_P is not available here. can you pl

  • Mac Mini struggling to reboot

    Hi Everyone.  I'm the proud owner of a 2010 model Mac Mini. It's working brilliantly most of the time, but when I need to reboot it (For software upgrades or for any other reason), it just seems to stop.. It gets stuck on the blue "shutdown" screen w