SIM PIN code 1020 WP8.1 re-enter

Hello,
Ever since I've installed the latest update of WP8.1 (8.10.12397.895) Developers Preview on my Lumia 1020 the phone looses its connection with the GSM network (4G) and asks me to re-enter the SIM PIN code serveral times a day. I re-enter the code as soon as I discover this, but in the mean time the phone is not on the GSM network so I won't receive calls. As soon as the phone drops the network connection it briefly displays the Windows logo as if the phone was rebooted.
I hope this will be corrected in an next release, or beter in the final release that will come together with the Cyan update.
L8r, Henk

I think my problem is solved. My attention was drawn to an article on the user forum of my provider. Someone with an Android phone was experiencing fairly similar problems.
When my provider started with 4G a year ago they used a specialised Access Point (AP) for 4G as their default AP was not suitable for 4G at that time. During one of the many updates since, the special AP disappeared from my 1020, but since my wife’s 920 did not have the update yet I recreated the 4G AP and copied the settings from her phone. Now it seems I’d better not done that. The guy with the Android phone found out that in the meantime my provider started supporting 4G in their default AP. And that the specialised 4G AP was nog longer supported and thus should not have been used anymore. The fact that the AP disappeared during an update should have warned me.
Anyway, a couple of days ago I selected the default AP and have not had any SIM PIN code issues since. Whereas with the old 4G AP I had to re-enter the code within 2 hours at max as soon as I came at work and my phone connected to my works Wi-Fi (under control of an MDM).

Similar Messages

Why isn't SIM PIN code respected after reset?

I have a PIN code set for my SIM card, and I just noticed this: if I shut down and then reboot my iPhone, I'm asked for the PIN code before I gain control. However, if I reset the iPhone (by holding the mute and home buttons down until the phone shuts down) and then reboot it, my phone reboots without requesting a PIN code.
Anyone else?

Hi odysseus,
The iPhone should not ask you for a SIM pin after being reset.
+"If you've already entered the SIM PIN since powering on iPhone, and you reset iPhone or toggle Airplane mode, the SIM PIN is not required."+
http://support.apple.com/kb/HT1316
-Jason

SIM pin code.

So I enabled my SIM card pin. My question is, shouldnt the iPhone prompt me to enter my pin number on restart? Similar to when you enable the passcode function.
Thanks.

Yes with restart I mean re-boot on /off.
Strange it didnt ask me to enter PIN, it merely stated that SIM was locked. The SIM LOCK message was displayed where the the network logo was.
I had to manually go into settings and disable pin for the unit to go online.

PIN Code Problem on E51

Hello guys...
I want to change my pin code of my phone..
Currently I'm using Nokia E51.
I change the PIN Code Request to "Yes" and it asked the PIN code. And so where can i get that pin code? My phone is new one and I already try "12345" and "01234" but it didn't work. So, that means it already wrong 2 times. I was told that i can only wrong 3 times. is it right?
If so, can u guys guide me or help me or any advice about where is that PIN Code????
if i want to clear the timer of the call duration,etc. I just input "12345". Its ok and its work too. No other code...
(But now I change my Lock Code from "12345" to something mix with letter and number) But in the PIN Code Request, i can only enter number. So i think PIN code Request code is not this lock code.
So, can anyone guide me on this?
Thanks

The PIN code refers to your SIM card, not to E51
Your service provider must have given you a PIN code and a PUK code for the SIM card. If you fail to enter the correct PIN code three times, the SIM card is blocked and you must unblock it using the PUK code.

PIN Code Need Help on E51 SOS/F1 Help..!

Hello guys...
I want to change my pin code of my phone..
Currently I'm using Nokia E51.
I change the PIN Code Request to "Yes" and it asked the PIN code. And so where can i get that pin code? My phone is new one and I already try "12345" and "01234" but it didn't work. So, that means it already wrong 2 times. I was told that i can only wrong 3 times. is it right?
If so, can u guys guide me or help me or any advice about where is that PIN Code????
if i want to clear the timer of the call duration,etc. I just input "12345". Its ok and its work too. No other code...
(But now I change my Lock Code from "12345" to something mix with letter and number) But in the PIN Code Request, i can only enter number. So i think PIN code Request code is not this lock code.
So, can anyone guide me on this?
Thanks

The default pin code is set by your network so phone them and ask what it is.

PIN-code ändern

wie kann ich mein iPhone 4 SIM PIN-Code änern

If you mean the security code (which protects your phone) rather than the PIN (which protects your SIM) then the default on all Nokia phones is 12345.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

HT6154 What is the factory iPhone 3GS pin code?

What is the factory sim pin code for a iPhone 3GS?

There is none. If you have a SIM PIN, contact your carrier.

Changing the pin code

how do I change my PIN code?
No need to reply just to say it's not safe, I might forget it and all that.

Hi Rushafs ji,
I supposed you meant the SIM pin code. I'm assuming that its a S60 OS. If so, you should be able to do it at Menu, Tools, Settings, Security, Phone and SIM, PIN code. Mobile lock code would be Lock code instead of PIN code.
Hope this helps.
Cheers.

The phone does not lock up when entering PIN code

This morning my Z1 Compact wanted me to enter the PIN code: I did so but the only thing that happened was that the text "Enter PIN code" disappeared. But I was still at the same page. It seems to have stuck or freezed. Tried to remove and reset the SIM card, called the operator who says there´s nothing wrong with the SIM card. tried to force restart with and without the SIM card. I can't get pass that starting page.
The funny thing is that on the "mssage board" or whatever it is called at the top of the phone is updating when I got a message, mail, updates etc. But I can not scroll down and see them in detail.

You may want to consider running a software repair
Fully switch off your phone and make sure it is disconnected from your Pc then start PC Compannion and select Support zone then Update my phone/tablet then in Blue select Repair my phone /tablet and follow the onscreen instructions and when prompted making sure your phone is still switched off hold Volume down and connect your USB cable which should enter your phone into flashmode and start the repair process
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

IOS7 setup: Can't enter PIN code

I had a black-screen issue with my iPhone 4s, and had to reset it. After the reset was done, I got my phone to start up the setup-process (just like when you geet a brand new phone), but i accidently hit the pass button once the "enter SIM"-dialogue popped up. Now I can't enter the SIM's PIN code anywhere, and my phone is useless. I can't enter it on the phone, nor iTunes. What can I do?
I already tried the following:
Restarting the phone
Forcing restart by holding the 2 buttons
Restarting the process
Calling a number (I can't because the sim is not unlocked)
Ejecting the sim card
Connecting to iTunes (on 2 seperate computers)
Any ideas?

These are your choices: 1. Get a new sim, without a sim pin; 2. Remove your sim, insert in another phone & remove the sim pin, then re-insert in your phone.

6131 - Keypad inoperative, cannot enter PIN code

After stopping an alarm on my 6131 I noticed a couple of minutes later that there was a flashing alarm indication on the screen. I tried to clear this alarm with the keypad but the keypad was frozen. I turned off the phone and on turning it back on the keypad is inoperative and I cannot enter the PIN code.
Any help appreciated.

Hi Iwonami,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues with a SIM PIN on your cellular-enabled iPad, you may find the following article helpful:
iOS: Understanding the SIM PIN
Regards,
- Brenden

HT4623 My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

Hi Mikki.J.H,
Thanks for using Apple Support Communities. This article has some information regarding SIM PINs that may help:
iOS: Understanding the SIM PIN
http://support.apple.com/kb/ht1316
Cheers,
- Ari

How many times can you enter the wrong pin code on an iphone before it resets?

How many times can you enter the wrong pin code on an iphone before it resets itself?

Hey Robin.T,
Thanks for the question. The following article provides the answer to your question:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you enter the wrong passcode six or more times, you'll see a message that says one of the following:
iPhone is disabled
iPad is disabled
iPod touch is disabled
You can also set your passcode lock to wipe the device after 10 unsuccessful attempts (Settings > General > Passcode Lock > Erase Data)
Thanks,
Matt M.

Enter Passcode is now a text box instead of a 4 digit PIN code...

hi,
recently, I somehow got into a state where my phone (first generation iphone running 3.0) got into a state where the passcode is a text edit box instead of a four digit PIN code. i tried entering my PIN, didn't work, tried entering every password I use -- still doesn't work. what is going on here? i would like to be able to use my phone again someday...
anyone know what's going on?
thanks.
-phil

Well the only route I can think of if it only happened due to error and not that you are using a phone connected to a company Exchange server is to restore it. Though believe it won't let you by normal means, you have to put it in recovery mode and then restore it as new.

Enter your system lock pin code to unlock this mac

I just traded my Macbook Pro for a 27" Core i5 iMac. I wiped the iMac when I traded and I brought it home to do a full reinstall. I booted holding the Option key down and noticed this iMac had a recovery partition I opted to use the recovery partition to reinstall. To my surprise it was Lion. And the cd was snow leapord. I was cool with that and signed in and used the computer all day. Then sometime while I was sleeping a obnixious alarm went off on the iMac and there was a box to enter your system lock pin code to unlock this mac.
Priding myself on doing all repairs on my own since my primary job is reinstalled and virus removal. Long story short I could not access anything no matter what I tried. I ended up calling apple care and asking what needed to be done they explained I needed to bring it to a apple authorized store and they would have to unlock the firmware.
Do you guys know what they are talking about or is there anything I can do before driving 100 miles to my nearest apple store. I find this rediculous.

I did indeed did wipe the system clean at the owners house, I went home with what I thought was totally clean hard drive, there was a recovery partition I did not see until I got home. This recovery partition was indeed tied to the original owner which I did not know at the time. I assumed it was like any old windows recovery and it was clean and made reinstalls a dream. Well long story short I had the snow leapord cd in the drive and ready to go until I seen this recovery partition and I opted to use the **** recovery and I reinstalled registered and signed into everything and used the computer all day 12 hours probably. By the way the recovery partition that was tied to this guy was lion.
So then I left the computer on and went to sleep. Late last night an alarm went off and that is when I saw the enter the pin to unlock this mac. I have tried holding the C when I boot up, I have tried holding the Option key when booting up. I have tried resetting the pram. Nothing can be done. I can get to another lock screen by phsically unplugging the power cord then booting up holding the option key. That will bring me to a screen with nothing but a lock and a line that I can type some kind of admin password. Nothing I have with work. I tried, root, admin, administrator, my password I used when I set lion up. Nothing!!!!!.
At this point this machine is more or less 100% useless, the only option I can see is to bring it to a authorized apple retailer and have them fix it. I did bring it to a local apple store. And they said they could probably fix it, but I would have to pay them between 50-100 dollars. The repair guy said something about getting the info from the ram. I just laughed and left.
Anyway this is like a BIOS lock, you cannot get to terminal, cd, to any boot options, you cannot reset anything at all. It's a full lock.

SIM PIN code 1020 WP8.1 re-enter

Similar Messages

Maybe you are looking for