Sim slot for internet

Hi,
I want to use the sim slot to surf the internet but dont know how to use it.the model of my laptop is ProBook 4510s.
your help will be highly apreciated .
This question was solved.
View Solution.

laptop don't support sim card directly the only thing you can do now is to buy a usb data card /dongle insert sim in it and then connect it to your laptop define the access point name and get connected to the internet usb data card are mainly of 4 variants 7.2Mbps 14.6Mbps 21.2MBps and 4G modems you can find them in local market cost should be around 700-1.4k for 3g modems or you can buy them online through amazone,ebay,flipkart and i would recommend shopclue as i got a 21.2MBps modem for 1.1k

Similar Messages

  • I want buy Ipad Wi-Fi 3g in Canada Apple Store.Is it have micro-sim slot for using 3g abroad?

    I want buy Ipad Wi-Fi 3g in Canada Apple Store.Is it have micro-sim slot for using 3g abroad?In Ukraine being exact.

    Lets make it clear.
    The thing is i know that in the US Ipad 2 Wi-Fi+3G Verizon goes without any slot for micro-sim. So i won`t be able to use 3g abroad.
    In Canada store they don`t give no required carrier.Does it mean that Ipad 2 Wi-Fi+3G from there has a micro-sim slot and is ok for using 3g worldwide with local carrier?

  • Micro sim slot (for ipad2)

    I've just bought an ipad2 : WIFI   3G (from a Verizon store in the US) to use in another country but at my surprise there was no slot to insert the micro SIM !  Can anyone help me with this ?

    Only posting because I think some clarification is needed. What they are both getting at is three models were made for the iPad2.
    Wifi only:
    Has an all metal back and can only get access from wifi hotspots.
    AT&T:
    This model has a little black plastic strip on the back at the top for better antenna signal strength. It also has a sim card because it uses a technology that requires sims. This slot is located on the side towards the top.
    Verizon:
    This model also has the black plastic bit but it lacks the sim slot because Verizons technology doesn't need sims.
    Both the AT&T and the Verizon model are locked to their respective carriers, so to answer your question, yes you have to use verizon for any 3G access, (you can add a contractless plan from the iPad itself in the settings). This also means that even if you had an AT&T iPad you would have to use an AT&T sim. There are ways around this with the AT&T model, though they usually involve messing with the firmware by jailbreaking.

  • Ideapad S10-3 / 3t - What's the SIM slot for?

    Hello!
    I ordered my 3t, but it hasn't arrived yet.  I saw an unboxing video that shows a SIM card slot under the battery.  Since I can't find any place that customizes for 3G or anything else....I can't find what the slot is for?  Obviously a SIM card, but is there a modem already in these models or is there a card to purchase for 3G support?  I see an antenna plug on the side...any ideas on that either?
    DAVE

    Hi and welcome...
    When open the bottom lid ... there should be an empty place for minipci-e card, thats the place for upgrade..could be one of these S10-3t possible 3G card , (driver for those cards online at driver section) if there is an antenna pre-factory installed and a simcard-reader (not only a dummy hole) , but i think if there is a pre-factory antenna open end plug , 99,9% there is a simcard-reader too..
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Internal 3G modem with SIM slot for Satellite A500-12W?

    I join this forumn in great frustration because I have spent hours online searching for an answer.
    I run a Satellite A500-12W with a USB 3G modem but I don't like having that fragile thingy sticking out of the computer and occupying one of only 3 USB ports. Under the battery there is a slot that says SIM but it seems to be empty as it cannot hold a sim card in place.
    I do not have an internal 3g modem, I have WLAN capabilities.
    Surely it must be possible to buy a card that goes internally and works in the same way as a USB modem?
    There is an empty slot next to the memory slots that says 3G/TV and something else, is that the place and in that case, which product should I buy?
    I am eternally grateful for any help, this frustrates me greatly. Thanks in advance.
    Colorblend of Sweden

    Hello
    I agree with the user above. I think the notebook case is also used for other models they are support such a 3G module and SIM card and therefore you can see a SIM card place.
    But if such an upgrade would be possible it can be done from an authorized service provider so I would recommend contacting the guys.
    You must contact them in every case because they can sell all original Toshiba spare parts and if such an upgrade is possible you need the parts for that.
    You can find a list of the guys here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an ASP
    Good luck! :)

  • I have a dv2-1003ax laptop with a sim slot and unable to install drivers for that sim slot on win7

    Hi all
    I have a Pavilion dv2-1003 ax with a sim slot. for which i am unable to install driver on windows7 pro 32 bit.
    Please help
    Thanks 

    Hey LogicSystems,
    What driver are you trying to install? If you could give me some more information on what you are trying to achieve I will be able to help you better.
    Thanks,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How to use mobile broadband using sim slot in my lenovo B570.

    Hello...Plz. provide the sufficient information of how to use / activate the mobile broadband using the SIM in the SIM slot. Information provided asap will be appreciated.

    hi there.
    can you first confirm that your computer has wwan card and also sim slot for the sim?

  • Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    Hi, Alan -
    How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
    You can, but you'll need to expand your cabling a bit.
    You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
    If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
    I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

  • I'm traveling to Europe (France and Lithuania) with my iPhone 5s.  I would like to buy a local SIM card for use while in each country. Some sources (Verizon phone support) say this is as easy as buying the card and inserting in place in the slot. Others (

    I'm traveling to Europe (France and Lithuania) with my iPhone 5s.  I would like to buy a local SIM card for use while in each country. Some sources (Verizon phone support) say this is as easy as buying the card and inserting in place in the slot. Others (Apple Genius) say I must completely restore the iPhone if I replace the sim card. Still others say I cannot use a local sim card. Can you help me find the correct information? Thanks for your help.

    That's a wonderful question, ssmiley67. The iPhone 5s comes unlock for international use. Many of our LTE devices are unlocked for international purposes and work upon inserting the international SIM in the device.
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • X61s and slot for sim card slot

    Good day.
    Some time ago i noticed that i have sim card slot near RAM modules. Machine type: 7666-B4G.
    So, i have a question: is it a WWAN modem installed in my notebook?

    s0n1q wrote:
    Good day.
    Some time ago i noticed that i have sim card slot near RAM modules. Machine type: 7666-B4G.
    So, i have a question: is it a WWAN modem installed in my notebook?
    All X61 models have the moulding in the body shell for a SIM slot, but they don't all have a SIM reader or antennas installed, let alone a 3G card.
    Your 7666-B4G config shows as this....
    L7700(1.8GHz), 2GB RAM, 100GB 7200rpm HD, 12.1in 1024x768 LCD, Intel X3100, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ethernet, Secure chip, Fingerprint reader, 8c Li-Ion, WinVista Business
    ... so, IMO, its unlikely it is WWAN-ready at any level. 
    My 7676-3PM came in this config:
    T7100(1.8GHz), 1GB RAM, 80GB 5400rpm HD, 12.1in 1024x768 LCD, Intel X3100, Bluetooth, Modem, 1Gb Ethernet, Fingerprint reader, 8c Li-Ion, WinVista Business 
    ... and its very definitely not WWAN ready.
    Cheers,
    Bill
    I don't work for Lenovo

  • The new iPad with 4g does it have to have a sim card in the slot for it to work so sometimes i can have4g and sometimes i cant

    the new iPad with 4g does it have to have a sim card in the slot for it to work so sometimes i can have4g and sometimes i cant

    For it to work(iPad) no. You do have to have it in to get data when your not connected to wifi. If it doesn't say 4g all the time that is because of the location your in. If your connected to wifi, the iPad will use the wifi connection first before using your data plan.

  • What steps do I need to take once Verizon unlocks my sim card for international use on another carrier

    Hi, I am traveling to Romania in a few days. I called Verizon Global Support and had them unlocked my sim card for the 4s.
    They told me there was some steps I had to take after they unlocked it and I will find these steps on the Apple website.
    Well I cant find what they are talking about and my search on the internet is not giving what I want.
    I see things about Sprint 4s and that u must connect your phone to Itunes to complete the unlock process is this the same for verizon ?
    The Verizon Rep told me I will be able to use a Internation Sim but I had to connect my phone to a computer after replacing the International sim and go threw a whole process of Restoring and resetting my phone threw Itunes. Is there true ?  I dont not have a internation sim with me is there any other way to see if its unlock and how the process is ? Do i need to set my phone to only run on GSM when I get there or will the International sim automatically switch the band ?
    I know its alot of question all at once but i just want to get to the point.
    Thanks any help will be appericated

    This is the only thing I could find but it does not answer my question or even what I was told by the Global Support Rep.
    Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
    1. Meet the following requirements:
    * Must be a Verizon Wireless customer.
    * The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
    * The line of service must be active at least 60 days.
    * The line of service must be in good standing for the past 60 days.
    * Only one SIM Unlock per line every 10 months.
    If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
    2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
    3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
    4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
    5. Enjoy your new unlocked iPhone 4S!

  • How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?

    How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!

    Copied from the link provided.
    Follow these steps to use your iPhone without a wireless service plan:
    Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
    Connect the iPhone to iTunes on a computer connected to the Internet.
    Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch.

  • Want Wired for Internet, Wireless for file transfers on home network

    I live in Dubai where internet in my house is connected straight from an ethernet port in the wall in numerous rooms. I have one wired connection hardwired from port to airport extreme which creates a wireless network for my laptops for internet.. apple tv et al. (home network 10.0.1.1 etc)
    In the other room i have a mac mini which is directly hardwired to a second ethernet port. I use this machine for hard wired internet as its essentially downloading continuously for work.
    Looking at network setting states..
    Wired connection states in network details : (To be used purely for hardwired internet)
    router address of (91.74.X.1)
    and ethernet port ip (91.74.x.21) 
    Wireless connection states in network details : (To be used purely for connection to home wireless network and streaming of files within internal networks)
    Router  (10.0.0.1)
    IP4V address is  (10.0.1.4) 
    Subset mask is 255.255.255.0
    I would like to force the mac mini to only use the wired ethernet connection for surfing/downloading, and also have an IP from the home network (10.0.1.2 etc) purely for file sharing/streaming with other computers on my home network. 
    Is this possible ?

    NAS is the right tool for this job.
    It is expensive but the market leaders.. synology and QNAP have really been doing it for long time and the ability to do file store/sharing and most importantly backup in these is excellent. Pick the best you can afford.. and buy disks that are in the recommended list. ie the cheapest are not always the best.. indeed they seldom are.
    Plan very carefully for rotation of USB drives (easy and cheap now with 4TB single drives). Rotate backups with offsite location on weekly basis.
    I would buy a 4 disk case.. you can use 4x3TB which are the best value at the moment.. that gives you 9TB of storage.. plus redundancy for a dead drive.
    Alternatives are using a Mac Mini as a server.. with a large stack of disks on it.. generally should be thinking thunderbolt if you want speed. Hideously expensive though for now.
    You can buy an Extreme or TC.. either would work well. TC allows you easy TM backups without using your NAS..
    Edit very large files on the computer. ie copy to computer.. edit.. copy back to the NAS.
    Editing very large files over wireless.. not good. Multiply that by mutliple computers.. not even fair.
    Copy a large project to the computer.. work on it.. copy back to the NAS.. in the meantime Time Machine should be able to take care of incremental backups.
    There are heaps and heaps of solutions.. as long as it is logical and easy to you.. and covers what you need.
    Don't skimp.. spending a $1000 for a NAS with disks.. plus extra for the backup disks.. that represents how many day's work for you plus anyone you have helping.. $$$$ ????
    A mini as a server is a good alternative.. You don't need to run server OS.. but share files to the network. Very hard to build the capacity of the NAS though.
    And a Mac Pro is now a joke without internal slots and cages for drives. (nice machine but wrong for this).
    And Apple have nothing in between.. a short tower case.. been missing for a long long time.

  • The Nano-SIM slot in iPad Air cannot working

    I have iPad Air (WiFi + Cellular) since a year ago. Its capacity is 32 GB (26.6 GB net) and its iOS version is 8.1.3. I didn't have any problems recently, but its Nano-SIM slot is damaged and cannot be used anymore. It happened when I put my iPad on a bed, then it got bounced and fell to the floor. Luckily, the battery is in good condition and able to be recharged. Its WiFi, apps, and other components can be used as usual.

    It sounds as if what you have is an iPad 2 WiFi+3G from Verizon. It will have no SIM slot and will only work on CDMA networks (for all practical purposes, only on Verizon's CDMA network).

Maybe you are looking for

  • Unable to find PanelPage option in ADF Faces core...

    Hi, Am trying to come up with SRDemo application for 11g and am following the tutorial provided for 10g in the site. I am encountering various problems as I am working with 11g. One of the problems is that am not able to find "Panel Page" option unde

  • Select statement on maintenance view.

    Hello Friends, I have a quick question. I have a maintenance view, and I want to do a select statement on this view in an ABAP program, but seems like the view is not filled with data when running the program. How do I get the view to be populated at

  • Changing LookAndFeel for JSP

    Can some1 help me in changing the LookAndFeel of a JSP page?? What i want to do is create JButtons, JTextfields etc..... with a new LookAndFeel..just like we do for a swing JFrame...how can I do this for a jsp page ??

  • Set generate flag to false for index, but index will still be created

    I found that the generate flag for index will now be stored correct, even I close and reopen th ephysical model. However, even i set the generate flag for an index to false, the DDL for the index will be generated. Any workaround? Additional hint: *

  • BI Publisher study guide

    Hello, Can anyone guide me how to learn BI Publisher from begining and provide me some study material as well ? My email id is [email protected] Thanks n Regards, Mrugesh Parikh