Sim Tray jammed

Today I tried to change my sim card because I changed of carrier but when I inserted the sim removal tool and pushed the tray it only popped out a little bit, it pops out enough to remove it but the sim card its stuck I can't get it out, any advice?

Its ok! After some hard work I got it out! Thanks for your help anyway

Similar Messages

  • IPhone 3gs sim-tray jammed

    My 3gs sim-tray is jammed
    Any help is greatly appreciated.
    My 3gs is still under warranty m planning to go to apple store.
    Any one had the same problem ??
    What you did ??

    Tried it mate
    But doesn't matter how hard i press it doesn't come out more then 1mm and when i tried to out using a plucker it feels like something stuck inside.

  • IPhone 6 sim tray jammed can open only half

    my ip6 sim got jammed after inserting slightly bigger nano sim with force!tray opens half only!please help me??!!

    I wouldn't try and force it you may cause user damage
    Take it to an Apple Store Genius bar or an AASP for attention

  • IPhone 6 sim tray jammed

    HI i m trying to change the sim but iPhone 6 sim tray is jammed. Plz help

    I wouldn't try and force it you may cause user damage
    Take it to an Apple Store Genius bar or an AASP for attention

  • Help! iPhone Sim Tray Jammed

    I accidentally insert the sim tray the wrong way and it got stucked. How do I get the tray out???
    What should I do? >.<

    make an appointment with a genius at the apple store, or try to see if att can help.

  • My sim tray is locked, and whenever I put the sim eject tool in the hole beside it, it will not open, what should i do?

    My sim tray is locked, and whenever I put the sim eject tool in the hole beside it, it will not open, what should i do?

    Use a small thin piece of plastic (metal tools are likely to scratch the case)  and work along the seams of the tray. In all likelihood your tool is unlocking it but the tray itself is a bit gummed up, jammed.  Be patient, don't force things, and you'll probably get it open in short order.

  • IPhone 5 Sim Tray Material?

    Hi,
    i have a question to the iPhone 5 Sim Tray.
    My problem is that my provider can't deliver Nano-SIMs.
    He mean it is possible at January 2013.
    So now i cutted my Sim from Micro to Nano.
    It works great in my iPhone 4.
    But now comes the big question.
    I think the iPhone 5 Sim Tray is a metal tray.
    Could i have short circuits when i insert the cutted sim in the iPhone 5 Tray?
    Or has the tray a isolation like the iPhone 4 tray?
    I hope anybody can help me.
    Thanks.

    iPhone 5 confirmed to use nano-SIM, current SIMs not compatible.
    The "Micro SIM" is too thick to fit in the iPhone 5.
    http://en.wikipedia.org/wiki/Subscriber_identity_module#Formats
    http://www.pcadvisor.co.uk/buying-advice/mobile-phone/3380824/apple-iphone-5-nan o-sim-what-you-need-know/
    But the difference in thickness, even just 0.09mm, may cause problems when a cut-down micro-SIM is inserted into an aperture designed for a nano-SIM.
    I knop that 0.09 mm is not a large difference in thickness, but will add up to be too thick if you try "jamming" one in the iPhone 5.
    SIM card
    Standard reference
    Length (mm)
    Width (mm)
    Thickness (mm)
    Full-size
    ISO/IEC 7810:2003, ID-1
    85.60
    53.98
    0.76
    Mini-SIM
    ISO/IEC 7810:2003, ID-000
    25.00
    15.00
    0.76
    Micro-SIM
    ETSI TS 102 221 V9.0.0, Mini-UICC
    15.00
    12.00
    0.76
    Nano-SIM
    ETSI TS 102 221 V11.0.0
    12.30
    8.80
    0.67
    Embedded-SIM
    JEDEC Design Guide 4.8, SON-8
    6.00
    5.00
    <1.0
    This chart was copied from: http://en.wikipedia.org/wiki/Subscriber_identity_module#Formats
    This is info that I have found using Google.
    Message was edited by: b j t

  • Can I have a replacement for my Nano SIM tray of iPad Mini?

    Hello, I just lost my nano sim tray of ipad mini 16GB white at a network carrier store. Does anyone know if I can get a replacement? I purchased the ipad in Singapore but I live in Ho Chi Minh, Vietnam. Do I have to write to Apple in Singapore or US to ask for help? I am willing to pay for the replacement as long as I can get one for my iPad. i am afraid that Apple store in Ho Chi Minh would not help me for this stuff. Thanks much for your advices!

    Hello, I just lost my nano sim tray of ipad mini 16GB white at a network carrier store. Does anyone know if I can get a replacement? I purchased the ipad in Singapore but I live in Ho Chi Minh, Vietnam. Do I have to write to Apple in Singapore or US to ask for help? I am willing to pay for the replacement as long as I can get one for my iPad. i am afraid that Apple store in Ho Chi Minh would not help me for this stuff. Thanks much for your advices!

  • Okay so my i just got my new iphone 4 from sprint and sprint has the sim tray locked theres no hole on the side or anything and i was wondering if i took it to the apple store can i get it unlocked or another iphone with a open and close sim tray

    sprint shouldnt have locked the sim tray anyways and i think this is just wrong because i payed for the phone and should be able to do what i want with it. they say you can unlock the sim card or the tray i guess if you in good standings with the company an apperantly im not so i was wondering if somthing can be done about this because i see no hole or anything to even open the tray someone HELP ME ! please and thank you

    No. Nothing can be done about this. It was made clear quite some time ago what the situation was going to be.
    Now... That said, if you have an iPhone 4S, there is a SIM tray on the right hand side of the phone.
    If you have an iPhone 4 as you indicate, THERE IS NO SIM TRAY. The iPhone 4 is NOT a world Phone. You can only use that phone on Sprint or roam to their CDMA partners where present. The phone will not work at all throughout most of the world, including Europe.

  • Where can I purchase a new micro sim tray for my IPhone4

    My IPhone went flying off my car and the sim and micro sim tray flew out of the phone. Where am I able to purchase a new Micro Sim tray?

    This what you're looking for?
    http://www.amazon.com/iPhone-Micro-Holder-Microsim-Adapter/dp/B004Z4UOWG

  • Blackberry Passport sim tray issue is prevalent and they will not fix it for you because it is your fault. Ridiculous.

     I bought my Blackberry passport on Feb 13rd. Right out of the box the sim tray didn't read the sim. I thought it is my sim's problem, so I waited for another sim. New sim came in, still didn't read. After a long call with customer support and BB virtual support, I had my device sent in around mid March. They checked it and said I damaged the sim tray and I need to pay 268$ to have it fixed. I though it is ridiculous since I haven't done anything to the phone. So I argued with them and eventually they agreed to have my fixed without cost.
     However when they sent me back the device, I poped in the sim and it only works for 1 day, on and off the second day and then not reading the sim at all after that. I think the sim tray's problem with the passport is prevalent and the pin can be broken by the simple act of poping in the sim card. My ATT sim is working perfectly fine on the 5s and my brother's iphone 6.
     After 2 days of receiving the "repaired" device, I call them again and this time they said it is certainly my fault and if I send it in again, I will have to pay 268$ to have it fixed.
     So I thought for people out ther if you have a passport, don't pop in and out the sim card. It can really easily be broken.
      For me, I think now I just gonna use my "broken sim tray new passport" as a reading device. After 10 years, I will officially switch to other brand. Still love the keyboard though, but anyway.

    Check that your sim card does not have a burr or edge on it before you insert it, as that may be what's damaging the SIM pins.
    Site anly allow linlks to web images, so here's what the tray is supposed to look like - with the SIM cover on.
    FWIW - a T3 torx driver is required to remove the screws around the SIM  and TF card tray cover. That would allow you to look at the underlying pins - and possibly - with a bit of luck, fix them on your own.

  • Does the mini ipad has sim tray?

    Does the mini ipad has sim tray?

    Welcome to the Apple Support Communities
    A Wi-Fi + Cellular iPad mini has got a Nano-SIM tray, so you can insert your Nano-SIM there

  • Broken sim tray- nexus s

    Hןת
    2 month ago I bought in best buy LA the mobile phone - nexus s.
    when I came back to my country -Israel , I discovered that the sim tray is broken so I can't use it for calls.
    What can I do now?
     thank u very much!
    Liran

    http://www.samsung.com/us/support/service/request
    Go here.
    Crystal
    Superuser
    Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
    *Remember to mark your questions solved and click the star to give kudos to show your thanks!*
    While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
    My opinions do not in any way shape or form represent Best Buy's Official decisions.

  • My 4s phone getting hot in sim tray side so i need a solution

    my 4s phone getting hot in sim tray side so i need a solution?

    They are free at Corporate Verizon stores; retailers usually charge for them.  You also can call Customer Service and have them send you one.
    And you don't need a SIM card to activate an iPhone 4S on VzW's network.

  • How come i can't open the sim tray even if i use the small pin?

    how come i can't open the sim tray even if i use the small pin?

    Press firmly and push either the sim eject tool or a small paperclip straight in until the tray pops out.
    If that doesn't work make an appointment at an Apple store.

Maybe you are looking for

  • Test Execution hangs while executing a test from Command prompt option

    I have done the following 1) Created a script Test driver 2) Added different scripts as Script->Properties->Assets to the driver script 3) Call each of this asset script from TestDriver using command getScript("<<ScrptName>>".run(1, true, true, true)

  • The context has expired and can no longer be used

    I am running across a repeatable error when accessing a specific Site Collection. EVERY TIME the SC is loaded we receive the error 'The context has expired and can no longer be used'. I have already validated the SharePoint servers' time zones are al

  • How to install the ADS for ECC 6.0?

    Hello All, I have few questions before I can start with my problem 1) Is the ADS a part of the WAS for ECC 6.0 ? 2) Is any Ehp available for installing the ADS separately? My requirement is to have a PDF application run in ECC 6.0 . I have no idea ab

  • Cannot connect Vixia R300 to computer

    I have a brand new Vixia R300 and I cannot get my MacBook Pro to recognize it.....tried all the rouble shooting solutions and still get the "no camera was found" message ...HELP!!!

  • Oracle Designer, schema registration

    Hi all, I have registered a DB schema in Oracle Designer (via jr_registration.register / jr_registration.generate). I understand how to use registered tables, but what about registered pl/sql packages? Where can I see them and how can I put them unde