Simcard not supported after ios upgrade

after upgrading my iphone3G, i tried starting my iphone and a picture of a USB showing connection to an ITUNE icon pops up with a message saying "simcard not supported" and "emergency calls only" now my iphone is useless. CAN SOMEBODY HELP ME PLEASE!! really need ur support.

has your phone been 'unlocked' for any network sim to be used? because if you update your phone this can sometimes be cancelled depending on how it was unlocked. if so, you will have to have it unlocked again (if it can be unlocked) or use a sim card with the correct network sim.
hope this helps ;0)

Similar Messages

3rd party hdmi adaptor not supported after ios 8

Hi everyone..... since i updated my ipad 2 to the ios8 i can no longer watch or view my photos on the tv with my 3rd part hdmi adapter it says this is not supported now, i went to apple and they said its coz its not an apple product i said it worked before but no one is offering any advice.

It is possible that iOS 8 has been tweaked to sense the adapters being used. That was done with iOS 7 and the Lightning cables - the iOS devices would simply reject those that were not in full compliance with Apple specs. Some of he high quality third-party cables were fine and worked. Those that were the cheaper knockoffs did not work, the device would not charge and would not be recognized by iTunes.
i always stay with Apple stuff unless they do not make a particular cable/adapter but sell a third-party item.

Zone Base Forewall for VPN connections does not work after IOS upgrade

Hi all,
We use cisco router 2911 as corporate gateway - there is Zone Based Firewall implemented - I upgraded IOS to last version (15.2(2)T1) - originaly version 15.1(4)M1 - to solve issue with Anyconnect connections (bug CSCtx38806) but I found that after upgrade the VPN users are not able to communicate with sources in other zones.
More specific
WebVPN use this virtual template interface
interface Virtual-Template100
description Template for SSLVPN
ip unnumbered GigabitEthernet0/1.100
zone-member security INSIDE
There are other zones VOICE, LAB, ...
In the policy any connection is allowed (used inspection of icmp, tcp and udp) from INSIDE zone to VOICE or LAB zone
After VPN connection I am able to reach resources in INSIDE zone (which is the most important), but not in other zones. Before upgrade it worked.
Once I changed zone in Virtual-Template interface to VOICE, I was able to reach sources in VOICE zone but not in any other. I searched more and found the stateful firewall is not working for connections from VPN as ping is blocked by policy on returning way - it means by policy VOICE->INSIDE, once I allowed communication from "destination" zone to INSIDE zone - the connections started to work, but of cause it is not something I want to setup.
Does anybody has the same experiance?
Regards
Pavel

It seems to me I should add one importatant note - if client is connected directly in INSIDE zone, he can reach resources in other zones without any issue - so the problem is only when the client is connected by VPN - not in ZBF policy setup.
Pavel

Facebook does not open after ios upgrade yesterday 3/12/14

Upgrades ios 3/12/14 and now Facebook does not open.

Genieo Adware is installed. Removing it will help.
If you have another browser installed, use it.
If not, launch App store and get another browser for temporary use.
Remove it afterwards.
1. Use free AdwareMedic by clicking “Download ” from here
    http://www.adwaremedic.com/index.php
    Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
    Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
    “Quit AdwareMedic”.
               or
    Remove the adware manually by following the “HowTo” from Apple.
    http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
     Turn those off and relaunch Safari to test .
     Turn those on one by one and test.

Iphone 4s Purchased in USA is not supporting after IOS 8.0

I have brought unlocked Iphone 4s from US, two year before. I have inserted a SIM AIRCEL, Vodafone, Idea same was working fine. But 15days before when I have received update for IOS 8.0. I have updated same IOS but now i am not able to receive any service, as it is showing No Service.
when i am activating the sim again it is showing massage " Contact Apple for support, Sim is not active - whereas i have tried all service providers sim.
Please advise.

It was more than likely a hacked/jailbroken phone. It's now been bricked by the update.
Buy a new phone from a legitimate, authorized source.

Entune not working after iOS upgrade

When we first got our Camry Hybrid with Entune, we could use Pandora with my iPhone 4. Now everything links up and appears to be OK, but the sound does not come through. My iPhone 4 is running iOS 6.0.1 (10A523). My son's iPhone 4 is running iOS 5.0.1 (9A405) and Pandora works fine with his phone hooked up.
How can I get my iPhone back to iOS 5.0.1 (9A405)?
Thanks!

Requirement to remedy
(1) A supplier may comply with a requirement to remedy a failure of any goods to comply with a guarantee—
(a) by—
(i) repairing the goods (in any case where the failure does not relate to title); or
(ii) curing any defect in title (in any case where the failure relates to title); or
(b) by replacing the goods with goods of identical type; or
(c) where the supplier cannot reasonably be expected to repair the goods, by providing a refund of any money paid or other consideration provided by the consumer in respect of the goods.
(2) Where a consumer obtains goods to replace defective goods pursuant to subsection (1), the replacement goods shall, for the purposes of this Act, be deemed to be supplied by the supplier and the guarantees and obligations arising under this Act consequent upon a supply of goods to a consumer shall apply to the replacement goods.
(3) A refund referred to in subsection (1)(c) means a refund in cash of the money paid or the value of any other consideration provided, or both, as the case may require

Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug!

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

IMessage not working after iOS 5.1 upgrade! Feedback pls

iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......

You shouldn't have to hard restart and it shouldn't have anything to do with your router. If anyone else runs into this problem try resetting the network settings on your phone. All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
Edit: Some of us don't have the option of resetting our DNS servers. I run my own for example for caching purposes.

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

TS2621 why my outgoing mail server not working after ios 6 upgraded

why my outgoing mail server not working after ios 6 upgraded

Ask your carrier to send you the settings over wifi and then install them that way.
I'm on giffgaff and I used the giffgaff app from the store to sort this out.
Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
Very Poor indeed and I held off using Apple products for years for this very reason!!

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

Iphone 5 back camara not working after ios update

My Iphone 5 back camara is not working after ios 8.1 update this morning
Only getting some fuzzy image.
Camara was working before the update.
Resting the phone to factory setting restoring phone nothing seems to work
I think this will be my last Iphone as apple never respondse in any case

If you're expecting Apple to respond on this forum, you will have a long wait. This is a user-to-user technical support forum that is only hosted by Apple. This was made clear when you signed up. In any case, try the steps in this article to troubleshoot hardware issues (there is a camera section):
iPhone: Hardware troubleshooting

Internet not connecting after ios 7.0.2 update on iphone 5

Internet not connecting after ios 7.0.2 update on iphone 5

Hi there PompasJr,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
-Griff W.

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Simcard not supported after ios upgrade

Similar Messages

Maybe you are looking for