Similar function like LI10 in WM?

Hi,
In MM level, we could use LI10 (stocktaking) to change the material stock to a specific value directly, in WM level, is there a similar transaction code like LI10?
Thanks.

you probably meant MI10 instead of LI10.
No there is not such a straight forward way.
In general in WM you have to count by bin, means all materials that are in that bin, not just a single material.
To do this you have create the counting document, acitivate it, print it, enter the count, post the difference in WM, post the difference to IM. there is no shortcut.
If you want only adjust one materials stock in a bin that has many materials (mix storage), then you have to allow cycle count. This gives you the option to use LICC to create a inventory document jsut for one quant instead for the entire bin..

Similar Messages

Similar Functionality like SM30

Hi,
I created a Z-Table. I don't want to generate Table maintenance. In Production System the Users don't have access to SM30 for insert/delete/modify the records in the table.
Is there any other way to give some program to the users for similar functionality like SM30?
anybody written any program on this issue?
any idea?
Thanks in advance,
fractal

Hi Fractal,
Follow these steps:
1. Goto T-code (se93) and create a custom trasaction say ztest.
2. while creating give some short test and check the radio button
<b>Transaction with parameters(parameter transaction)</b>
3.In the next screen assign these values:
   Transaction --> SM30
   Screen --> Give the screen number which is seen in the table maintenence
                    screen in system--> status which you can directly go and find
                    through the T-code sm30.
   And in the Name of the Screen field as VIEWNAME and Value as the name of
   your Custom Table.
Now you can provide this T-Code for users to maintain the table.
Regards,
Vinod.
NOTE: PLZ close the issue if solved.

Does oracle have similar functionality like MsSql "for xml path('')"

Does oracle have similar build in functionality like MsSql “for xml path(‘’)” , or in another word, it can enforce the result set(multiple rows) into ONE line such kind of presentation way.
Thanks in advance. Any help would be greatly appreciated.

Here I would like specify my question mnore clearly,
CREATE TABLE t(
line NUMBER(3),
site VARCHAR2(4),
phase VARCHAR2(5),
test VARCHAR2(25));
INSERT INTO t VALUES (1, '0100', '*','1111111111111111111111111' );
INSERT INTO t VALUES (2, '0100', '=','2222222222222222222222222' );
INSERT INTO t VALUES (3, '0100', '=','3333333333333333333333333' );
INSERT INTO t VALUES (4, '0100', '*','4444444444444444444444444' );
INSERT INTO t VALUES (5, '0100', '=','5555555555555555555555555' );
INSERT INTO t VALUES (6, '0200', '*','6666666666666666666666666' );
Here I want to retrieve the 'line' column information in ONE line way
select line from t I want the result is like '1,2,3,4,5,6'
Any generous help would be greatly appreciated!!!

Is there BAPI have similar function like F-53?

Hi all,
I need to call a function like F-53. I find the BAPI BAPI_AP_ACC_GETOPENITEMS, which can return the open item for a vendor. but which function I can use for further opeartion??
I want to clear the open item in the report. Is there function I can call to do so??
OR what I can do only is to use BDC to record the screen??
Ned

Hi Ming Chen,
Try using BAPI_ACC_BILLING_POST bapi. Regards, NG.
Regards,
NG.

How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Help please?

How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Since I purchased my three Apple TV. I have had no need to download any of my movies to my Mac. Which has been great. However, I remember that I used to now have to do this... or did I? I am just frustrated because I want to stream all this stuff vice haveing to waiting for it all to download fill up my Mac's HD and then just delete. Someone help please?

Play the movie in iTunes to stream it.
Click the cloud icon to download it.

How to use an external start button for 6024E w/ sc-2345, I would like it to function like a start button in LabView but I don't know how to connect the external button to the sc-2345's connector block

I am confused as to how to connect my external start botton. I would like it to function like a start button on a front panel of a VI. I would like to use the +5V on pin 14 but I really don't know where to go from here. Any guidence for a novice would be most appreciated.

phod,
This is the LabVIEW Real-Time forum, so I suggest that in the future that you post this type of question to the Multifunction DAQ forum.
For the simplest solution you will have to connect your button to a digital line of your board, consult the sc-2345 user manual for a diagram of where these lines are exposed. You will have to connect your start button in series with a line that is high, such as your 5V pin or another digital line. Then connect this to a digital line that will be your start trigger.
Your program can poll the digital line that is connected to your button in a while loop and when it goes high, it lets the rest of the program execute. For the programming, I suggest you take a look at the shipping examples that come with LabVIEW. If yo
u have LabVIEW 7.0 go to Help>>Find Examples. Open Hardware Input Output>>Traditional DAQ>>Digital Input and Output>>E Series for some examples of digital I/O programming with E-series boards.
Hope that gets you started.
Gerardo

Left outer join functions like simple join

I created two views SCO_REQGROSSLINES_V & SCO_REQLINESCOMPLETE on Oracle requisitions base tables. Our business rules enforce the following identity: the number of gross requisition lines will always be greater than or equal to the number of requisition lines complete. (By complete I mean delivered.)
Each view has a key named DATESUBINV_KEY constructed of a transaction date and the subinventory code using this logic:
, TO_CHAR(TRUNC(transaction_date),'YYYYMMDD') || subinventory_code
On 03-SEP-2010 a user created a requisition with one line item for material from the HEAT subinventory which was not delivered. This row is retuned in the result set when I query on SCO_REQGROSSLINES_V but is NOT returned when I query on SCO_REQLINESCOMPLETE. So far so good.
When I issue either of the the following left outer joins I do not get the row for the row for the HEAT subinventory on 03-SEP-2010:
select rgl.trxn_date
, rgl.subinventory
, rgl.line_count gross_line_count
, rgl.ext_prc gross_value
, rlc.line_count lines_filled
, rlc.ext_prc lines_filled_value
from SCO_REQGROSSLINES_V rgl left outer join sco_reqlinescomplete_v rlc
ON rgl.datesubinv_key = rlc.datesubinv_key
where rgl.TRXN_DATE BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
and rlc.trxn_date BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
order by rgl.trxn_date, rgl.subinventory
select rgl.trxn_date, rgl.subinventory
, rgl.line_count gross_line_count
, rgl.ext_prc gross_value
, rlc.line_count lines_filled
, rlc.ext_prc lines_filled_value
from SCO_REQGROSSLINES_V rgl
, sco_reqlinescomplete_v rlc
where rgl.TRXN_DATE BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
and rlc.trxn_date BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
AND rgl.datesubinv_key = rlc.datesubinv_key(+)
order by rgl.trxn_date, rgl.subinventory
Question: Why would the left outer joins function as a simple join on DATESUBINV_KEY? Do keys on views function differently than keys defined in the data dictionary? If they do how can I make these keys to function like data dictionary keys?

Hi,
The WHERE clause is applied after the outer join is completed. In your example, rows from rgl will be in the result set even if they have no match in rlc. In those cases, all the columns from rlc will be NULL.
Okay, so you have these rows that contain data from rgl but NULLs where the data from rlc was supposed to go. Now it's time to start the WHERE clause. You then apply conditions like this in the WHERE clause:
AND     rlc.trxn_date BETWEEN ...NULL is between anything, so the row that the outer join prodeuced is rejected.
All conditions involivn columns from rlc probably need to be part of the join condition, not the WHERE clause.
For example, in you first query the FROM and WHERE clauses might be:
FROM          sco_reqgrosslines_v      rgl
LEFT OUTER JOIN sco_reqlinescomplete_v rlc ON    rgl.datesubinv_key   = rlc.datesubinv_key
                                        AND   rlc.trxn_date       BETWEEN TO_DATE ( '29-AUG-2010'
                                                                    , 'DD-MON-YYYY'
                                              AND       TO_DATE ( '04-SEP-2010'
                                                          , 'DD-MON-YYYY'
WHERE   rgl.trxn_date     BETWEEN TO_DATE ( '29-AUG-2010'
                         , 'DD-MON-YYYY'
               AND     TO_DATE ( '04-SEP-2010'
                         , 'DD-MON-YYYY'
                         )Always use (at least) two arguments when calling TO_DATE.
Conditions that only involve rgl can be in the WHERE clause, but if any conditions from rlc are in the WHERE clause, then the effect will be the same as an inner join.
There no difference between tables and views (or sub-queries) in this regard: the same thing would happen regardless of whether rgl and rlc were really tables or not.

Is there a similar function in Edge Animate that is similar to the draw path function in After Effects?

Is there a similar function in Edge Animate that is similar to the draw path function in After Effects?

No, I'm afraid not. However, you can drop a clip from in to out into the timeline and the hit CMD+R and grab the end, changing the length of the clip to fit in the space that you need by speeding up the clip.
Hope that helps.
Andy

Variant of expect command having similar functionality in Solaris OS??

Hi All,
I am using one shell script in Linux with expect 5.38 command utility, this script contain ssh and sftp. Now same shell script I need to use in Solaris (SunOS eupr0016 5.9 Generic_118558-05 sun4u sparc SUNW,Sun-Fire-V440) but issue is that the Solaris OS doesnt have expect utility.
Please let me know, is there any other variant of expect command/utility having similar functionality to use on Solaris OS.
Thanks
Jiten Mistry

JitenMistry wrote:
But we have Solaris 5.9 OS installed5.9 and 9 are the same version of solaris (actually I think it is SunOS 5.9 and Solaris 9, but whatever). So my advice is to install the package SFWexpct that should be on the companion CD.

T codes with similar functions in AP and AR process

Hi,
I need list of T codes which has similar functions in entire AP and AR process.
Thanks
SM

Hi,
From the menu Extras > Settings > Tick "Show Technical Names".
The look through the standard menu for AP & AR . Items with similar descriptions = Similar T-Code.
regards

[SOLVED]:Is it possible to use functions like decode in 'setWhereClause()'?

Hello,
My requirement is that I have 2 poplists - Country and States.
When I select a country,the corresponding states of that country should get populated in the states poplist.
The approach I took is that :
I selected firePartialAction as ActionType in Country poplist. Then I called a function to VOImpl of StatesVO and set the where clause there.
Now I was thinking about using decode as there is no direct connection between the CountryVO and StatesVO.
Is it possible to use functions like decode in 'setWhereClause()'?
For Example:
setWhereClause("DECODE(LOOKUP_TYPE,'XXC_IND_STATES','IND','XXC_US_STATES','US') = :1");
setWhereClauseParam(0,Country);
executeQuery();
When I tried running the page,no error was given but when the country poplist was changed - there is no change in states poplist.
If its not possible to use decode in setWhereClause(), could you please guide me as to how I can write a query to retrieve a value from a table and store it in a variable 'A'- so that I can pass that variable 'A' in setWhereClauseParam function .
Message was edited by:
Anju Susan

That kewl, but for u knowledge u can add anything in ur where clause of query through ur code in Voimpl class. It is even possible to do change entire query, see Voimpl class methods in javadoc.
--Mukul

Is there any function like malloc and free in labview?

Im writing a vi that will handle my memory request.
Im doing a very high speed video record sessions , and the frames cant be saves on hardisk in realtime), so im saving the frames on memory, and i want to use memory as
much as i can(~2GB) and to save the maximum frames that i can save (and it depends on bit depth, height, width, total memory).
VI Operations={
Allocate Memory (frame width, frame height,TotalMemorySize) ,
Add Frame(index) ,
Get Frame (index),
Free Memory
In each record session, there will be a different FrameWidth and Height, so the maximum frame that i can save in memory may be different and equal to
IndexMax=TotalMemorySize/(FrameWidth*FrameHeight)
Im doing this by allocating a 3D array [FrameIndex , row , column]
The fact that the width and height change in different sessions indicate that i need an ability to free the previous allocated 3D array memory and allocate a new one.
(lets say that i have 2GB total memory..)

This request really takes the system and the programmer to the limits....
First of all:
LabVIEW does not have any functions like malloc and free. LV wants to prevent the user to have to think about stuff like this. On the other hand, the memory management in LV is therefore hard to do or even impossible, at least to such an extend as you request.
Some thoughts about your application:
1. If you want to have about 2GB of framedata in RAM during runtime, you will need the large memory awareness active. Otherwise, a 32 bit OS will give you "out of memory" messages. Refer to the LV help "VI memory usage".
2. Storing the data in an array could be a difficult task. Arrays have to be in memory without any gap. Therefore, you'd encounter "out of memory" messages even if your RAM totals enough free memory (theoretical).
3. The idea of linked-lists does not compy in LV since you cannot store pointers to structs (since those are abstracted from the user).
4. Maybe you should take a look into vision.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to implement a back functionally like the back of the browser

Hi, I have a commandImageLink("go back") in a template jspx. How to implement the back functionally like the back of the browser with a managed bean method??. For know I m not using task flows.

I think you can use a javascript method to go back to the previous browser page.
http://javascript.about.com/library/blback.htm
http://www.pageresource.com/jscript/jhist.htm
http://www.w3schools.com/jsref/met_his_back.asp
Perhaps you find something useful and related to backing beans here:
http://adfdevelopers.blogspot.com/2009/04/some-handy-code-for-backing-beans-adf.html
NA
http://nickaiva.blogspot.com

Is possible in a dialog screen attach a field functional like select-option

hi,
Is it possible - in a dialog screen - to attach a field that has functionality like Select-options fields?
And if so - how?
and information about complex_selections_dialog

Hi,
Look at the below links
module pool programming " to add selection-option on screen"
module pool programming " to add selection-option on screen"
Regards
Sudheer

Similar screen like FB60 for Complex Posting

Can someone help me what is the ABAP Logic behind screen/code created in FB60.
i wan't to design a similar screen like FB60 but do not know from where to start the coding.
please help me on this.
thanks

open tcode fb60(or what ever you want)
in menu bar click on system->status.
then a pop up window will apperar.
in that double click on program name and you can see the code there.
and youe it as per your requirement.

Similar function like LI10 in WM?

Similar Messages

Maybe you are looking for