Similar monitors in different targets

Hi, have a doubt
For example, when I scope Monitors to below targets,
1. Logical disk (Server)
2. Windows server 2003 Logical Disk
3. Windows server 2008 Logical Disk
I couldn't see any unit monitors in 1st one i.e. Logical disk (server), but in 2nd & 3rd . Is that cause of first one an abstract. And what if I need to point to all 2k3 & 2k8 computers, should I target both versions of windows separately
or shall I point to 1st one, i.e. Logical Disk (Server). Similar situations are there like physical disk etc., Can anyone let me know difference between 1st & 2nd, 3rd mentioned above.
Thanks!!

For monitoring Windows Server Logical Hard disk, you should built a monitor and target for windows server 2003 logical disk and windows server 2008 logical disk separately.
1, 2 and 3 are class and you should use discovery to discovery relevance object into a particular class. For all windows 2003 and 2008 Server logical disk, Microsoft MP has two discovery rules, one is target for windows server 2003 operating system and the
other is target for Windows server 2008 operating system, which you can find out the relevance discovery rules under Authoring workspace --> Management pack Object --> Object discoveries.
Roger

Similar Messages

Similar Monitor available in multiple places

I have just a general question about monitors in SCOM. I was setting some overrides for monitoring CPU utilization and noticed that the same (or very similar) monitor was available in multiple locations. for Example, the "Total CPU Utilization Percentage"
monitor can be found in these three locations.
Windows Server 2008 Core Operating System
Windows Server 2008 Full Operating System
Windows Server 2008 Operating System
What location would be the proper place to set the override for the monitor? I assume that it is the last one, Windows Server 2008 Operating System, and that it would cover all installations of the 2008 OS. Just a little confused about what SCOM
does with the three different groups or if it is really just "Core Only", "Full GUI Only" and "All 2008".
Thanks for any insight you can provide!
Darrel

Hi
by design scom class will inherit the monitor apply to the base class, you can override the monitor at any state of the monitor by selecting "all objects of class" in override option.
you can cross check the overrides by using override explorer
http://www.systemcentercentral.com/download/override-explorer-for-operations-manager-2012/
http://blogs.msdn.com/b/dmuscett/archive/2012/02/19/boris-s-tools-updated.aspx
regards
sridhar v

How to load data into 3 different target tables usin BODS ?

Hello Friends,
I have 5 different source tables with same field definitions, Now I want to load all the records into three/four different target tables (Flat file, SQL Server, XML, and Oracle ) Could anyone please tell me how to do this task ?
Thanks in Advance,
Bheem.

Hello Bheem,
You can create separated dataflow for each target as suggested by Bala, this is a good choice when evaluating you scenario.
If you put all targets in the same dataflow you may experience problems if one of them is down (as you have different servers as targets).
BODS will send the data simultaneously to all targets and when one fails, the load will be break and you may have the tables not sinc anyways (if you plan to use a single dataflow to avoid this situation, it won't do it).
So the best option is to create separated dataflow and put inside another one so you can run a singe dataflow that will call each one of the target and if onw fails the other will complete accordingly.
Then if you put them inside a error trapping, you may even make your dataflow to retry the load prior abend the job.
Think about cascading your dataflows and let the leaf level simple as it can be so it will be easier to schedule and debug your process.
Pay attention to datatypes and other conversions you might need when working with more than one source/target.
Regards,

Message-Mapping: Use same RFC lookup for different target fields

Hello,
I need to apply an RFC Lookup which delivers a boolean flag back (true or false). This RFC lookup should be used for different target fields.
Is there a way to execute the RFC lookup just once and then store the result in an internediate variable that I can use for all futher checks for different target fields?
If this is not possible and I have to apply the RFC lookup for all necessary target fields is it then executed for each target field ? This is exactly what I want to avoid in order not to slow down performance.
The input parameter (=source field value) would be the same.
Thank you for your advice!

Exactly.
Here is a UDF example I have that you could adapt to your needs.
Set
public String setCounter(String a,String b,Container container){
/* Store values in global datacontainer
a: mapping value and return valueparameter
b: name for stored value parameter
GlobalContainer myGlobalContainer;
myGlobalContainer = container.getGlobalContainer();
myGlobalContainer.setParameter(b.toUpperCase(), a);
return a;
Get
public String getCounter(String a,Container container){
//write your code here
GlobalContainer gc = container.getGlobalContainer();
if (gc.getParameter(a) != null) {
return String.valueOf(gc.getParameter(a));
} else {
return "1";

ABAP MAPPING Querry - How to create Different Target NODE NAME as of Source

Hi,
In abap Mapping
DATA READ FROM SOURCE XML NODE into incode ******
data: incode type ref to if_ixml_node_collection.
incode = idocument->get_elements_by_tag_name( 'BUSINESS_DAY' ).
CREATE OUTPUT XML NODE WITH SAME NAME AS 'BUSINESS_DAY' **
data: outcode type ref to if_ixml_node.
outcode = incode->get_item( index = 0 ).
data irc type i.
irc = msgtype->append_child( outcode ).
*BUT TO CREATE OUTPUT XML NODE WITH DIFFERENT NAME AS 'BUSS_DAY'*
data: ws_val type string VALUE 'xyz'.
data: elementsender type ref to if_ixml_element.
elementsender = odocument->create_simple_element(
name = 'BUSS_DAY'
value = ws_val
parent = msgtype ).
Please guide me how I can assign incode value to ws_val.
So that I can generate OUTPUT XML NODE with different name as of SOURCE XML NODE
i.e. How to create Different Target NODE NAME as of
Source with same Data
<Note>: I am using "How to... Use ABAP Mapping in XI 3.0 ver.1.00" and to create different NODE name as of source
is not given in it.
Thanks & Regards.

Hi ABAPers,
Please Guide Me .....
This is ABAP Mapping problem in XI.
How can I read data from incode into ws_val.
data: ws_val type string
data: incode type ref to if_ixml_node_collection.
incode = idocument->get_elements_by_tag_name( 'BUSINESS_DAY' ).
Best Regards

SAP XI 3.0 Same source for different target in std Value mapping function

Hi,
We have replicated 4 value mapping entries from R3 to XI having the same Context , Agency , Schema and value for source, but each of the 4 values has the same Context and Agency but different Schema and Value respectively.
To illusstate :
Source                             |Target
Context Agency Schema    Value -----Context Agency   Schema     Value
CS1      AS1      SS1      1        CT1       AT1      ST1       A
CS1      AS1      SS1      1        CT1       AT1      ST2       A
CS1      AS1      SS1      1        CT1       AT1      ST3       B
This value mapping is not working and we always get the source value as the result.
We are wondering if the reason for this is that we use the same source for different targets. But we are not 100 % sure of it.
When I read the documentation on Value mapping or when we use the value mapping standard function in graphical mapping, we pass the context , agency and schema of the source and target respectively and the source value to get the target value, and this combination is always unique in our case as seen in the above example.
Has anyone faced this kind of an issue, if yes I would appreciate if anyone could help us resolve this problem.
Thanks in advance.
regards,
Advait

Hi Advait,
From the below what I understand is that you are not able to do value mapping for the follwoing
1     A
2     A
3     B
As value mapping allow one to one mapping only. Please do it like as mentioned below
1     1*A
2     2*A
3     3*B
Then in the graphical mapping of Integration Repository do the mapping for the same as shown below
source field > VALUEMAPPING> UDF--> TARGET Field
In UDF suppress the value of 1* , 2* , 3* which can be done as follows
create one UDF with one input field
//write the code as below to suppress the field
return input.substring(2);
Here the davantage of using 1* , 2* , 3* etc is that you have the option to use value mapping for 100 values which I think is not normally the case for any Interface.
If you have same source you can do the same thing for that.
Hope this helps you to resolve your query.
Thanks & Regards
Prabhat

MM06E008 - Monitoring of contr. target value in case of release orders

Hi,
I'm working on the enhancement MM06E008 (meant for monitoring the Contr. target value in case of release orders). Based on the requirement, we need to issue either an information or a warning message thru the exit. The message is getting triggered only when i issue an error message. Rather i want to send an information or a warning message. The requirement is such that we could not use the 06 Message class 042 Number in the config and thus we had to make use of this exit.
Can anyone let me know if it is possible to issue a non-error message (Say a warning or an info) thru the exit.
Points will be rewarded for helpful answers.
Thanks,
Venkat

HI,
Try this:
EXIT_SAPMM06E_013
*" XEINA STRUCTURE EINAU OPTIONAL
*" YEINA STRUCTURE EINA OPTIONAL
In debug find out what values are stored in XEINA and YEINA. One is the old value and the other is the new value.
Regards,
Subramanian

Transformation routine on 2 different targets fields

Hi gurus,
I have been trying do some ABAP transformation routines, I did 1 and it was good works fine, then I tried to create another transformation routine on a different target field of the same DSO, and for some reason what I did on the global declaration on the other transformation is in this transformation and if I do a change in the second transformation it shows in the first transformation, other thing is that in the second transformation anything works, I got errors for everything and are not very specific. I may be skipping some basic steps; maybe I canu2019t create 2 transformation routines in the same transformation?
Thanks

Hi,
There can be just 1 start routine.
These are execute once. Also the declarations done in the global section remain visible in all the transformation routines.
You can write multiple transformation(field level) routines.
-Mayuri

Agent has disabled full monitoring of this target. Only target Status is being monitored.

The following warning is displayed when going through the following:
Database instance (target type)
Oracle Database > Monitoring > All Metrics
"Agent has disabled full monitoring of this target. Only target Status is being monitored."
Triggered by the following:
Summary
Due to 5 hung threads, the target is having all collections disabled
Internal Event Name
CollectionsDisabled:HungThreads
Event Type
Target Monitoring Disruption
Category
Unclassified
Following actions executed to attempt resolution:
+ Database has been bounced, error is resolved
+ Clearstate agent
+ re-enable all collections manually: Metric and Collection Settings > collection schedule column; enable
+ Bounce agent
OMS Version: 12.1.0.4.0
Agent Version: 12.1.0.4.0
Anybody have any ideas on how to clear this error?

emctl clearstate agent TARGETNAME,TARGETTYPE
emctl status agent scheduler
emctl status agent target <Instance_name>,oracle_database
emctl status agent dbconnections
Try to colelct the particulare metric
emctl control agent runCollection TARGETNAME:TARGETTYPE COLLECTIONITEM
Finally, Observer the error message any on the log
agent_inst/sysman/log/gcagent.log

Working on pages in 1 Library, but for several projects (different targets)

Hi guys,
I'm a designer in a developer-team, actually we give Flex, FlashBuilder and FlashCatalyst a big try.
Goal:
to make one application / service, with same Webservices and components,
for different mobile devices, as AIR-Application and for probably for websites too.
Problem (short):
When i work with FXPL (Library), i cannot work on the different user-interfaces for each device/AIR. I can only work on the components itself, but not on the full software-interface.
Problem (in detail):
As an FXP (Design and Code in same project) its easy to work on all User-Interfaces(States). But as we have different targets - such as iPad, Android-phones and AIR-Application - i need to work with a Library to keep all components in same version, without editing 3 or more projects with same changes.
So, how to work not just on the single components itself (example: a login-form) but also on the complete user-interface (with its headers, navigation, transitions and all this stuff) in Flash Catalyst (while working with a Library) ??
Example:
A complex interface got 3 new components, which are already build & designed. I, as the designer, want to place & align them and maybe working on details. But in Flash Catalyst i cannot get the full-view of the user-interface (for each device / target).
My idea for a work-around:
Instead of working with the primary states (which is not possible with the library) i create something like an over-all-component for each view. So i can work on the single components (like child-parts of the main-user-interface), i can align them and work on them with states too.
In this case i need to make all these components three times (for ipad, android-phones and AIR app),
so: i can work on any user-interface for every target in flash catalyst, instead of just working on the components!
but: at end of day i get alot of "components" which are just placeholders for states, views or component-groups.
- Is there any better workflow yet with librarys & different targets (working on all interfaces)?
- Didn't i see a critical point about my idea for a work-around ?
///// SoftwareDetails:
We work with FlashCatalyst CS 5.5 (1.5.0) and FlashBuilder 4.5 (4.5.1)

The basic idea is sound, however none of the components in Flash Catalyst are mobile friendly, nor is any of the skinning that it does. For that reason I would recommend not incorporating Flash Catalyst into any real mobile projects. It is fine to mock up a prototype, but nothing will deploy or run well on device.
I hope this mobile issue is addressed in a future version.
Chris Griffith

Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions

Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-Donald

To prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features.

Connect 2 externa monitors with different resolutions?

Is it possible to oonnect 2 external monitors, with different resolutions to a mbp pro?
I've read some about the "matrox solution", but that one requires that the monitors uses the same resolution.
And, just to be clear, I don't want to just duplicate the screens, one should be primary.

You may want to phone OWC and ask whether what you want to do is possible if one monitor is connected to the mini-Displayport and the other is connected to a USB port using this adapter:
http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/
Note that the OWC adapter, like most USB video adapters I've seen advertised, is limited to a maximum resolution of 1600 x 1200, so you won't want to use it with a monitor whose native resolution is higher than that.
Message was edited by: eww

Advise on buiding different target app

Dear all,
I need to build a Windows 8 application which should be able to run either on phone, tablet or Desktop.
The key point is all those 3 application are sharing some common like :
- Get data from a web portal CMS through REST api
- Data model Library
Desktop application is using WPF and MVVM light toolkit
Desktop application is capable to store data in a local SQL express db
App running on phone or table should store data as XML file or SQL light ( more for caching purpose)
Of course on each device the rendering and possitionning of control would be different but I would like to keep WPF in all target and be able to use common MVVM model that will then be bind to respective view
Does all this will work, how should I plan my project and organise it in order to handle the 3 devices ?
That will be my first app and real concrete project so thanks for clear explaination.
Of course I have browse the Windows dev getting started and all those stuf but prefer to have advise from people who get already field experience on this like best practices
thanks again for your time
regards
serge

Hi serge,
As I know the phone and tablet using Windows Runtime framework while the desktop app use .NET framework, Runtime framework is similar like normal .net framework, but kind of different on API, see this for more information:
.NET for Store apps overview
Besides, here are some porting guideline:
Porting WPF and Microsoft Silverlight to WinRT hope this helps.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

FDM Different Target Application

Hi,
We have a existing FDM application for Hyperion Enterprise target application, one location. However, we have added new Hyperion Enterprise Application since and now need a new mapping/feed to second application. Is it possible to create new location in FDM and which loads to new Enterprise Application or would have to create new FDM application.
I know there is an Target Adaptor on the location section and it is currently set to none. Not sure if this can be utilize.
Any help would be appreciated.
Thanks,

Hi 821254,
You can configure adapters from FDM web client or FDM workbench.
There's some brilliant documentation at the following link:
http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html
I would recommend the following reads (Assuming you are running FDM 9.3.x - If your running a different version of FDM you'll find similar documents with similar titles):
Go to Hyperion Enterprise Performance Management System Release 9.3.x -> View library
Go to Installation and Backup tab ->
Download: Hyperion Financial Data Quality Management Readme.pdf (Import correction note on importing adaptors)
Download: Hyperion Financial Data Quality Management Installation Guide.pdf (Chapter 10 - Configuring Adapters)
Go to Data Management tab ->
Download: Financial Data Quality Management Adapter for Hyperion Enterprise Release G4-G Readme.pdf (Import correction note on importing adaptors)
Quoted from Hyperion Financial Data Quality Management Installation Guide.pdf:
About Integration with Target Applications
Integration settings are used to point FDM applications to target applications. The target application is the application where data is loaded. Hyperion Enterprise, Essbase, Oracle's Hyperion® Planning – System 9, and Financial Management are examples of valid target applications.
One FDM application can load to an unlimited number of target applications. For example, some locations in the FDM application can load to Hyperion Enterprise, while other locations load to Financial Management. In addition, the FDM application can be configured to load to multiple applications of one product (two or three Essbase applications, for example).
gluck,
-David

Monitor displaying different colour then what is being printed

When I print my newly designed letterhead what I see on the screen is different from what is printed. I do not believe it is the printer as all other documents print the same colour as what's seen on the screen. Please help....

what gets printed still doesn't match the monitor (it's darker, overall).
Photoshop-Epson Print Workflow has a bug when you select 16 bit in the print dialogs (don't check those options in the printing routine)
SECRET: How-to-make-the-print-match-the-monitor goal
Matching your print to what you see on your monitor begins with a good monitor profile (to PROOF the color accurately on the monitor), and it succeeds with a good target print profile (and proper print work flow) to PROOF the color accurately on the print.
The file (the document's Source Color Space) is independent of Photoshop:
The Color Management System CMS, Photoshop, ONLY uses the monitor profile for one thing: To PROOF a source file on the monitor (the monitor profile has zero to do with how the file prints).
The Color Management System CMS, Photoshop, ONLY uses the printer (target) profile Print Space for one thing: To PROOF a source file on the paper (the printer profile Print Space has zero to do with how the file looks on the monitor).
While my simple PROOFING ANALOGY doesn't address the pitfalls of relying on a bad monitor to evaluate and adjust digital color, it does make two important facts about Photoshop and professional color-managed printing workflows:
The printer can PROOF (print) the source file faithfully regardless of how right or wrong the monitor is set up, and
The monitor can PROOF (display) the source file faithfully regardless of how right or wrong the printer is set up.
Remember, this is true simply because the Source Profile is independent of the Monitor Profile and the Print Profile.
Getting a known good file (like the Adobe RGB or preferably the Whacked RGB PDI Photodisc-GettyImages RGB reference image) into Photoshop allows me to evaluate the monitor alongside the print to help me see where the problem is occurring...

Similar monitors in different targets

Similar Messages

Maybe you are looking for