Simple animation jiggles but does not move
Im very new to adobe edge, But ive done my reasearch! I have a png on top of a background image and I want the background image to move to the left when the website loads. The simple animation sometimes works after time but it sometimes doesn't when i preview it in my brower. But it works in my timeline. I dont know what im doing wrong and am pressed for time! please help !!!
so it doesn't do it as bad anymore now that I made the image behind it smaller. But it still takes a while to load and the animations aren't that smooth. any advice on what I can do to make it load faster/animate smoother?
Similar Messages
-
my bootcamp download stops after a few seconds. it takes forever but does not move. Could someone help?
For Windows Support Software: the download size is around 600MB - 1GB. Depends on your Mac Model. There are server problems but a good idea is to check from iStat menu's or something else if there is some activity.
Also, make sure that in your network settings:
Uncheck Automatic Proxy Detection
Uncheck Passive FTP Mode -
Getting nuts! simple onSubmit process but does not work...
hello.
once again my little problem:
on page 1 i have a report. every row has a link:
http://192.168.255.20:7777/pls/htmldb/f?p=116:21:3135390112602440240:END_TASK:::END_ID:22
where END_ID:22 gives the id of the row to a textfield on page 21 which is launched.
on page 21 there is a small "report" of only the chosen row to give us again the details of the chosen row.
there are additionally 2 buttons, button END_ID which stores the id that we've got through the link's URL, and another textfield P21_AUFTRAGSDAUER i can enter some stuff into.
and there's a submit button that submits the page (NO redirection or something like that).
now on the same page 21 i created an onSubmit process which should update the chosen row. it's launched after all verifications and stuff, and its source is
update wartungs_auftraege
set status=2,
time_spent = :P21_AUFTRAGSDAUER
where auftrags_id = :END_ID
and now there's the strange thing: while in
time_spent = :P21_AUFTRAGSDAUER
the placeholer :P21_AUFTRAGSDAUER is replaced correctly with the entered value, :END_ID in
where auftrags_id = :END_ID
is ALWAYS replaced with 1, although it shows the correct value that was passed through the link's URL! i just don't get it anymore! i've taken a look at the source code, and both inputs look the same:
<INPUT TYPE="text" NAME="p_t01" SIZE="30" MAXLENGTH="2000" VALUE="22" id="END_ID" >
<INPUT TYPE="text" NAME="p_t02" SIZE="30" MAXLENGTH="2000" VALUE="21" id="P21_WARTUNGSDAUER" >
i'm getting nuts with that, i'm trying since 2 hours to solve this problem... :(((
please help me, anyone! thanks...the END_ID item was created by using the create-element-wizard. its source type is set to (i try to translate it from german)
used alternative source: only if current value of session is NULL
source type: ITEM (application or site element name)
source value:
END_ID
standard value:
&END_ID. -
Anyone one have any suggestions? The message comes up everytime I start iPhoto now.
ThanksRebuild your iPhoto Library.
-
HT1338 Mountain Lion stops downloading at 41.3 mb's. Shows calculating and does not move on!
Trying to download Mountain Lion on a Mac mini and it is stopping at 41.3 Mb's. It shows "calculating" but does not move on beyond that stage! Version 10.6.8 is the current OS... Any suggestions?
I am having difficulties too!. I have found a way to push it along but don't know if in the end this will eventually succeed and I don't know why I am having to do this.
For what it is worth.
But going to the app LaunchPad and clicking on the in progress OS X Mountain Lion download and pausing it momentarily and then clicking it again, I have gotten my download to keep moving along. Again I don't know why and I have had to do this several time to get the download to progress to 3.11GB out of the total 4.37GB. So I'm three quarter of the way thru and about to do the process again to get the apparently stalled download going again.....
OK. It is again moving along..... now to 3.27GB
Too me it has the symptoms of the download process finding it has a bad package and repeatly trying again until it stops trying. At that point is just stops. When one kicks it by doing the LaunchPad stop and go, I think it checks finds a problem and restarts the download of the problem packets .... that's my theory....
My download is now up to 3.79 out of 4.27GB.
I have been messing with this on three computers in my network for a couple weeks..... This is the furthest I have gotten..... Perhaps I will succeed today....
BTW - It appears to have stop again at 3.79.... I;m going to play the stop/go game in Launchpad....
After about aminute it has started downloading again.....
Now 3.80GB.....
Perhaps Apple should look more carefully at it's caching servers...... I think they are either timing out connections or somehow making the past never fail Apple Downloaded look pretty advanced compared to this stop and go model....
I am now up to 4.03 and downloading with about 10 minutes to go....
Message was edited by: Terry Fundak -
Movie 115 minutes long but does not fit in idvd project?
movie 115 minutes long but does not fit in idvd project?
Hi
There are more to this
• Choise of encoding method
• Choise ot theme/menu
• What material that was used
• Choise of encoding method
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
Professional Quality (movies + menus up to 120 min.) - BEST
Best Performances (movies + menus less than 60 min.) - High quality on final DVD
High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
• Choise ot theme/menu
Some menus can take 15 minutes or more - No Audio, No Animation and a very simple one as "Brushed Metal" - will take very little time
• What material that was used
Some video codecs need to be re-encoded first then encoded in iDVD - this can be problematic for iDVD and most often gives a poor result.
So what video/audio/photo material did You use and how did You edit it and got it into iDVD ?
Yours Bengt W -
I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are in there OK. Any suggestions?
It won't show up on your Apple TV until it is fully downloaded into iTunes on your computer, have you done this.
-
itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.
Go to the Edit -> Preferences-> Playback
In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
Thanks,
John -
When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you
Delete some stuff to make room on the device.
iCloud is not local storage and has nothing to do with your situation. -
Initial postion of image changed but now image does not move
hi can any one solve this problem please, i have been trying to change the initial position of my image when i run it 1st on java textpad......
i seem to have moved the initial position of the image by the following >
public void paint(Graphics g) {
g.drawImage(CurrentImage,xPos = 10,yPos = 100,this);but now the image does not move when i press the keys in its new position
does anyone one know how to solve this?? if you do please reply THANK you.
the original code is below >
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.File;
import java.io.IOException;
import javax.sound.sampled.*;
import javax.sound.midi.*;
import javax.swing.*;
import java.awt.Image.*;
public class Man3 extends Applet implements KeyListener {
int xPos, yPos;
Image man1;
Image man2;
Image man3;
Image man4;
Image man5;
Image man6;
Image CurrentImage;
Image offScreenBuffer;
AudioClip tune;
public void init() {
setBackground(Color.white);
xPos = this.getSize().width/2;
yPos = this.getSize().height/2;
man1 = getImage(getCodeBase(),"man1.gif"); // right hand up
man2 = getImage(getCodeBase(),"man2.gif"); // straight
man3 = getImage(getCodeBase(),"man3.gif"); // right hand down
man4 = getImage(getCodeBase(),"man4.gif"); // left hand up
man5 = getImage(getCodeBase(),"man5.gif"); // straight
man6 = getImage(getCodeBase(),"man6.gif"); // left hand down
CurrentImage = man2; // man facing right
addKeyListener(this);
requestFocus();
tune = getAudioClip(getCodeBase(), "Track.wav");
public void paint(Graphics g) {
g.drawImage(CurrentImage,xPos,yPos,this);
public void checkXmin()
if (xPos == 0) xPos = 500;
public void checkXmax()
if (xPos == 500) xPos = 0;
public void checkYmin()
if (yPos == 0) yPos = 350;
public void checkYmax()
if (yPos == 350) yPos = 0;
xPos+=1;
if (xPos>500) xPos=0;
if (xPos==0) tune.play();
// man walks right
public void checkCurrentImageRight()
if((CurrentImage == man6)||(CurrentImage == man5)||(CurrentImage == man4))
CurrentImage = man2;
if(CurrentImage == man3) CurrentImage = man1;
else if (CurrentImage == man1) CurrentImage = man3;
else if(CurrentImage == man2) CurrentImage = man1;
// man walks left
public void checkCurrentImageLeft()
if((CurrentImage == man3)||(CurrentImage == man2)||(CurrentImage == man1))
CurrentImage = man5;
if(CurrentImage == man6) CurrentImage = man4;
else if (CurrentImage == man4) CurrentImage = man6;
else if(CurrentImage == man5) CurrentImage = man4;
public void keyPressed(KeyEvent evt) {
int offset;
int x = evt.getKeyCode();
if (evt.isShiftDown()) {
offset = 20;
else {
offset = 10;
switch (x) {
case (KeyEvent.VK_UP): // man goes up
checkYmin();
//checkCurrentImage(2);
yPos -= offset;
break;
case (KeyEvent.VK_DOWN):
checkYmax();
//checkCurrentImage(2); // man goes down
yPos += offset;
break;
case (KeyEvent.VK_LEFT): // man walks left
checkXmin();
checkCurrentImageLeft();
xPos -= offset;
break;
case (KeyEvent.VK_RIGHT): // man walks right
checkXmax();
checkCurrentImageRight();
xPos += offset;
break;
repaint(); // display image
public void keyTyped(KeyEvent evt) {
public void keyReleased(KeyEvent evt) {
public void update(Graphics g)
// Will hold the graphics context from the offScreenBuffer.
// We need to make sure we keep our offscreen buffer the same size
// as the graphics context we're working with.
if ((offScreenBuffer==null) || (offScreenBuffer.getWidth(this) != getWidth()) || (offScreenBuffer.getHeight(this) != getHeight()))
xPos = getWidth()/2;
yPos = getHeight()/2;
offScreenBuffer = this.createImage(getWidth(), getHeight());
// We need to use our buffer Image as a Graphics object:
Graphics gr = offScreenBuffer.getGraphics();
gr.setColor(getBackground());
gr.fillRect(0, 0, getWidth(), getHeight());
paint(gr); // Passes our off-screen buffer to our paint method, which,
// unsuspecting, paints on it just as it would on the Graphics
// passed by the browser or applet viewer.
g.drawImage(offScreenBuffer, 0, 0, this);
// And now we transfer the info in the buffer onto the
// graphics context we got from the browser in one smooth
}Not only is this your 7th or 8th posting on this topic, you can't even wait 15 minutes before bumping the posting.
Your question is no more important than anyone elses on the forum and continually posting, starting new threads on the same topic is one sure way to get your posting ignored. -
I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?
ladislavfromcygnet wrote:
Thank you Shootist007. I cannot do even Update now. I probably should have spent the same amount of money on a new IMac!
No not really. If this is a brand new Macbook Pro take it back for a refund. Apple has a 14 day No Questions Asked return policy for Full refund.
Take it back, get the Full Refund (DO NOT LET THEM TRY TO FIX IT. YOU BOUGHT A NEW COMPUTER NOT ONE THAT HAS BEEN WORKED ON OR NEEDS TO BE FIXED) and then decide whether to buy another Macbook Pro or the iMac. Or you could return it, get the Full refund and buy some other brand computer. -
My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?
Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
End Routine Issue - It does not move data from E_T_RESULT to RESULT_PACKAGE
Hi,
I am facing an issue with end routine. I have gone through previous posts on, how to write end routine and all.I wrote the end routine accordingly.
Here is my scenario,
I have 0CUST_SALES master data , which has all the Sales Org, Distribution Channel and Division, Sold to Party, Sales Grp and Sales Dist.
I am getting , Sold to party and Distribution channel at the field routine.
I am using, Sold to Party and Dist Channel and Division = '01'- whatever i populated using a field routine and trying to get the Sales Org, Sales Grp and Sales Dist at the end routine.
It looks like, all the code that i wrote seems correct but it does not populate any values into RESULT_PACKAGE.
Here is the code I wote at the end routine. I am not sure, whats wrong in it. I used, this link to write this routine :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/203eb778-461d-2c10-60b3-8a94ee91cbfc&overridelayout=true
Global Declaration----
DATA : BEGIN OF IT_CUST_SALES,
DIV TYPE /bi0/pcust_sales-DIVISION,
DIST_CH TYPE /bi0/pcust_sales-DISTR_CHAN,
SALES_ORG TYPE /bi0/pcust_sales-SALESORG,
CUST_SAL TYPE /bi0/pcust_sales-CUST_SALES,
SALESDIST TYPE /bi0/pcust_sales-SALES_DIST,
SALESGRP TYPE /bi0/pcust_sales-SALES_GRP,
END OF IT_CUST_SALES.
DATA: T_CUST_SALES LIKE TABLE OF IT_CUST_SALES.
Start of End Routine
SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
from
/bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
RESULT_PACKAGE
where CUST_SALES = RESULT_PACKAGE-SOLD_TO
AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
AND DIVISION = '01'.
LOOP AT RESULT_PACKAGE INTO e_s_result.
READ TABLE T_CUST_SALES INTO IT_CUST_SALES
WITH KEY CUST_SAL = e_s_result-SOLD_TO
DIST_CH = e_s_result-DISTR_CHAN
DIV = '01'.
IF SY-SUBRC EQ 0 .
MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
APPEND E_S_RESULT TO E_T_RESULT .
ENDIF.
ENDLOOP.
REFRESH RESULT_PACKAGE.
MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
End End Routine
Data comes into E_T_RESULT but it does not move to RESULT_PACKAGE. Any inputs will be helpful.
Regards,
KumarHi Hegde,
Declaration is same , its like this.
datA: e_s_result type tys_TG_1.
data: e_t_result type tyt_TG_1.
I don't know, when i inserted this code in this post, initially it was OK but once i post i also saw , its not that read friendly.
FYI, i am trying to put the code again, lets see if it works.
SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
from /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
RESULT_PACKAGE where CUST_SALES = RESULT_PACKAGE-SOLD_TO
AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
AND DIVISION = '01'.
LOOP AT RESULT_PACKAGE INTO e_s_result.
READ TABLE T_CUST_SALES INTO IT_CUST_SALES
WITH KEY CUST_SAL = e_s_result-SOLD_TO
DIST_CH = e_s_result-DISTR_CHAN
DIV = '01'.
IF SY-SUBRC EQ 0 .
MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
APPEND E_S_RESULT TO E_T_RESULT .
ENDIF.
ENDLOOP.
REFRESH RESULT_PACKAGE.
MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
Regards,
Kumar -
Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?
Thanks! For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine. It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do. The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
So, thanks anyway! Pretty cat!
Mona
Maybe you are looking for
-
Error ME154, Not possible to determine any components while creating PR
Hi all, I am trying to create a subcontracting purchase requisition and the system is throwing me the above mentioned message. This is my scenario, A=B+4C. For all the materials (A,B,C) in MRP2 view, it is not giving me any option to mention if it is
-
My computer crashed and now it won't boot
I'm in a bit of a bind. My scheduling won't allow me to go into an Apple store to get this diagnosed/fixed for an entire week; mainly due to Apple stores opening hours. I'll be needing my computer (and I have no temp replacement) during that time t
-
Not sure how where to post this suggestion to Apple, but wouldn't it make more sense to import patch names for Devices, more "up stream" into the Audio Midi Setup, rather than LogicPro9? This would then make patch names available for any software "tr
-
Unable to view photos received via e-mail or texting
Hi, I have been unable to view photos that I received via a text message. I do receive the yellow bubble alert telling me to download. After I hit the download button, it just hangs. I also attempted to send myself a photo from my work email addres
-
How i can get the Bar showing the amount of Web Page loaded as in Version 3.6.13
In Firefox Ver 3.6.13, when we open a webpage, in the lower right corner we see a bar which shows the position of Page loading by a moving green blocks in tthat Bar which i do not see in Firefox 5