Simple Application Info (About Solids)

I make solids all the time. I normally right click in the sequence to create. It always has the "Make Comp Size' option in the solids windows but its already the right size.
So i was wondering in what case would you really need to use make comp size?
In what circumstances would the solid you create be a different size than the comp?

The value in the dialog box is the same as the last one that you used. So, if the last solid that you made was 100x100, then that's what shows up when you make a new one. The Make Comp Size button is very handy then if you want to make a new solid that is the dimensions of the composition.
> In what circumstances would the solid you create be a different size than the comp?
There's a vast number of uses for solid-color layers, and they can be useful at all sizes.

Similar Messages

Need deeper info about RPC paradigm

Having scoured the Web for info about RPC, I find the same few discussions repeated widely, but certain things left unexplored. I therefore have particular questions that remain unanswered.
1) RPC server behavior appears predicated around "connect-call-disconnect, connect-call-disconnect, ..." behavior on the part of the RPC client; that is, a connect-and-disconnect around every remote procedure call. I, on the other hand, need my clients to implement "connect-wait-call-wait-call-wait-call-...-disconnect" behavior; that is, to connect, REMAIN connected for an extended period of time across multiple procedure calls, and disconnect only when the client is ready to terminate all use of the server. It appears that svc_run() supports this, but I want to avoid surprises; is there any restriction on this usage of svc_run()? Can this paradigm be supported by appropriate use of the RPC library routines available for replacing svc_run() with my own code?
2) The only "documentation" I have been able to find about how to write actual RPC programs dates back to 1992 and does not come from Sun. Virtually all of the routines appearing in its example programs are designated "obsolete" or "for backward compatibility" in their manpages on Solaris 8. Can you recommend/point to an instructional text that describes RPC programming as it would be done with "today's" interface?
3) Probably the largest single obstacle to my organization's possible use of RPC in "real," critical applications, is RPC's continuing C-specificity. We write all our applications in C++, and mostly object-oriented C++ at that -- whereas RPC appears not to have advanced beyond the "C with global variables" architecture (with one possible exception, following). Code generated by RPCGEN (without the -C switch, I admit; I haven't gotten that far in my trial-and-error experiments, yet) requires extensive hand-editing in order to compile C++ code that uses it, or link successfully with compiled C++ code. This obstacle is severe enough to potentially render RPC an unacceptable solution for us.
The possible exception I mentioned is that I found a webpage that discussed something called 'rpcc,' which appeared to be an object-oriented, C++ implementation of RPC. The page said this was available "on Sun machines," but I don't find it on MY Sun machines. Other searches do not turn up other references. Such a thing would be a godsend if it existed, and it would seem not to be so difficult for Sun's professional developers to create. So does it exist? If so, how can I get my hands on it?
4) Different sources contradict each other as to the "semantics" of an RPC procedure call. Sun's ONC manual says flat-out that Sun RPC provides only "at least once" semantics -- but then, the manual takes the approach that one is using RPC in a "transport-independent" manner. Other references discuss the issue at greater length (hint, hint) and imply that any RPC implementation can provide "exactly once" semantics, providing that one specifically force it to use "a reliable transport such as TCP." It is not clear how much to infer, or disregard, in Sun's simple statement. I need to know FOR SURE whether Sun RPC can be made, forced, tricked, etc. into providing "exactly once" semantics. If so, is "use of TCP" sufficient? Or are other tricks needed? Please outline the necessary steps that might be needed in addition to using TCP.
5) (Related to 4. Sun documentation contains language to the effect that Sun RPC provides "at least once" semantics because providing "exactly once" semantics "would be too difficult." However, a graduate student (at Syracuse U if I recall correctly) posts a research paper in which he describes an RPC facility, developed from scratch, that provides "exactly once" semantics. Apparently it's not THAT difficult, after all. The fact that it's "too difficult" for Sun does not exactly flatter the company. They may want to revisit this, and provide yet another RPC interface (in C++ while they're at it). I won't even charge a finder's fee. ;-) )
Thanks in advance,
Chris

I agree fully.
None of the example code applies to todays
"real-world" applications. Im trying to implement
multithreaded RPC on Solaris using rpcgen's -N
"NewStyle", -A "Auto multithreaded" and -C "ANSI C"
options but none of the examples anywhere show how to
do this. Is their a better technology that everyone
is using now that does a similar thing?I have an example that might help. It's a multi-threaded
NIS server that's been running in production for several
years. There are a few tricks in the source that might help.
You can download the source with anonymous FTP at
ftp.cc.umanitoba.ca. Look in the `src' directory for
midas.tar.Z.

How get info about computer app is running on?

I am making an application that will have a license for running on only one computer at a time. I will have a license file that will hold info about the app, its version, etc. But I also want to put info about the computer that it's being installed on (none of that info will be sent to me, just saved in the license - enrypted - so the license can't be used on a diff computer). I do NOT want the OS name and version (they can change that) but the actual computer info.
I know some C/C++ programs can do this, but is there any way to get this info from java? Does anyone have any sample code or even just suggestions of places to look for this information? It'd be greatly appreciated!
Thanks in advance!

I know it's not a perfect solution - yes someone could
decompile it, but how many people do that or know how
to do that? Well, most semi-decent Java programmers know how to do that. Then they'll decompile and crack it and distribute it, provided that your
program actually is something good.
While doing what I suggest wouldn't stop
100% of the users from pirating my software (which I'm
attempting to make a living off of), it would stop
MORE than if I didn't do it.Probably it'd annoy more potential customers. It's a very bad idea to piss off the customers.
As for changing the HD, or even the computer it's on,
that would be totally possible. The app is equipped
with a way to invalidate the license so it won't work
on that computer, and contact my site to invalidate
the public key and then allow them to redo it on
another computer/HD. It all would take only about 2
minutes actually, so it's not even an inconvenience.As a potential customer I'd have to disagree.
I see no problem with that.Yes, but you're the author not the customer.
Do you or anyone else know of a way to do this, even
if not through Java, in C (JNI) or C++?Through JNI it's possible naturally, but I don't know the specifics.
The reason
it's a big deal is this: for a company like MS if only
20% of the users of their product actually pay for the
product, they're still making millions. If only 20% of
the users paid for mine, I wouldn't even have enough
money to live for 3 months!Get a job? :) Sorry, but seriously having copy protection isn't really going to make a difference. If your product is really good it will get cracked, if it's a specialized piece of software that won't be circulating in the mainstream, then a simple license check would suffice.

HT5085 Gathering Info About your iTunes Library - Keep getting Network error

I bought iTunes Match yesterday, and so far have not been able to use it.
It gets to Stage 1: Gathering Info About Your iTunes Library and makes progress, but right at the end an error box appears saying:
"We could not complete your iTunes request. The network connection was reset.
Make sure your network connection is active and try again"
Well I know the network connection is active as I was able to be charged for iTunes Match and have had no problems making other purchases. I went to Advance > Run Diagnostics Tests from Help in iTunes and ran the Network Connectivity Diagnostics and it reported no problems.
Now I know how much Apple hate giving back refunds, but if people can't help, does anyone know how I can get my money back? If I click "Report a Problem" it simply takes me to the help pages. I tried contacting support but I received an email saying they can't help.
I'm getting quite frustrated now, so I'm reaching out and hoping someone can help me?
I've copied the diagnostic results below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.6.1.7
QuickTime 7.7.2
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 003CA7C40B1E98E0
Current user is not an administrator.
The current local date and time is 2012-05-18 20:20:20.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: bb5c046694c1f4c590202360da9f2bc5
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {444AF521-4D63-434F-AC33-8F05DA9C6C64}
Description:          Microsoft Virtual WiFi Miniport Adapter #2
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {4F46CBF3-C53C-4615-AF14-B46B9785D100}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {6D3CAB28-0C0B-4701-A440-B1A90BE75551}
Description:          Dell Wireless 5540 HSPA Mini-Card Network Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {8C130DAB-E810-4FA6-8946-1600FFE0DB2F}
Description:          Intel(R) WiFi Link 1000 BGN
IP Address:          192.168.1.69
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.254
DHCP Enabled:          Yes
DHCP Server:          192.168.1.254
Lease Obtained:          Fri May 18 20:01:40 2012
Lease Expires:          Sat May 19 20:01:40 2012
DNS Servers:          192.168.1.254
Adapter Name:          {B32D9395-8937-42EC-BC5F-352D07958EDF}
Description:          Realtek PCIe GBE Family Controller
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-18 20:14:07.

@ deggie, I wasn't threatening ANYONE. I was simply saying how frustrating this has become, seeing how I have been trying on my own to figure this issue out for more then a month with no results. Like I said in the beginning, I have not used any other account to purchase apps or other products on my phone. I have only ever used one account. There are 23 apps that are saying they can't sync. It directs me to authorize the computer, which I do but it doesn't change the outcome. If I proceed, I lose those 23 apps correct? Do I also lose all my text messages saved, and other things such as documents in the "notes"?

ITunes and Finder - how are info about audio files refreshed?

I am now in the process of embedding artwork in my mp3-files using CoverScout. I have also updated info about all my tracks in the iTunes after embedding the artowrk, by selecting all the files and clicking GeitInfo and clicking OK (without making any changes). All albums are displayed correctly with new artworks. This, however, is not the case with the Finder.
Generally, if a mp3-file has (embedded) artwork then the file would be displayed as a thumbnail of the artwork in question. The thing is that the icons for the mp3-files that were recently embedded with artworks are displayed as lacking artwork (they are displayed with the simple iTunes icon). Moreover, the Preview of GetInfo window does not show that the mp3-files contain the embedded artwork. The files are not refreshed. However, if I copy or duplicate those files then the copied files are displayed correctly, with the right getinfo. This, however, does not work if moving files. The files are not refreshed when moved, only when copying or duplicating.
I find it curious that Finder does not refresh the files, even after restarting the Mac, given the fact that iTunes have the information that there is artwork. Is there a way to refresh the files in the finder without copying or duplicating the files?
Another curious thing with albums containing tracks with embedded artwork is as follows: the Finder displays some of the tracks as thumbnails of the artwork in question, but not with all the files. The same goes for the Preview of the files in GetInfo. Some have the correct Preview displaying the artwork, but some lack the info about the artwork in the Preview. Why are not all files displayed as having embedded artwork, but only some, given the fact that they belong to the same album and the artwork was embedded in the same way?
The same goes when I embed the artwork without CoverScout, by updating multiple files through iTunes (dragging the artwork to the Artwork-field in Info). The Finder does not display that the files are embedded. I must copy or duplicate these files in order to refresh the info.
A more general question: how do I refresh files in the Finder? There is no refresh button, as in the Windows.
I would appreciate your help.
Kind regards
Alex

I was wrong about one thing concerning refreshing the files. I said that restarting the Mac would not refresh the files. However, if the iTunes have info about album's/tracks artwork then the Finder will also have this info after rebooting the system. My question is whether the Finder can be refreshed, without rebooting (restarting)?

How to get info about Composition/Candidate window?

Hi All,
I'm working on an application which should be able to take multi-language input (especially chinese, japanese, and korean).
When we type something in Chinese/Japanese, there will be Composition and Candidate Window popped up. I want to know whether there is a way to get/set some attributes/info about those windows.
Specifically, I want to be able to position the Composition/Candidate Window anywhere I want...
I've tried the active client tutorial for the on-the-spot and below-the-spot input, but I still haven't find a way to get a 'handle' to the windows...
Can anyone help? Thanks in advanced :)

I do not think the individual temp file percentages is of much use. What you usually want to know is how much of the temporary tablespace is in use and how much is available.
For that I think you want to compare current total usage information that can be found in v$sort_segment against total available for usage data that can be found in dba_temp_files to get the percentage of available temporary file space that is in use.
I quickly put together the following. See if either is on any use in constructing the information you really want.
> @t20
>
> select
2    used_blocks
3   ,total_blocks
4   ,f.blocks                             as FILEBLOCKS
5   ,round(used_blocks/total_blocks * 100,1) SORTSEGPER
6   ,round(used_blocks/f.blocks * 100,1)        TEMPFILEPER
7 from
8    v$sort_segment
9   ,(select sum(t.blocks) blocks from dba_temp_files t) f
10 /
USED_BLOCKS TOTAL_BLOCKS FILEBLOCKS SORTSEGPER TEMPFILEPER
       8960       689664    1025024        1.3          .9
>
> select
2    round(used_blocks/ (select sum(blocks) from dba_temp_files) * 100,1) ||'%'
3    as TEMPFILEPER
4 from v$sort_segment
5 /
TEMPFILEPER
.9%HTH -- Mark D Powell --

Info about "with" statement..

Hi everybody,
I have seen too many threads using with statements in sql...
The general syntax is :
SQL> with t as
( select ...... from .....
union
select ...... from .....
)...... 'test' from t;
What is this and where can I found info about this......????
I use Ora 10g.
Thanks ,
Simon

Or, to put it in basic terms.....
When you want to test something and you need a sample set of data to use, rather than create a table and populate it with a whole load of inserts (or insert select) you can just specify a "With <name> as select...." clause before your query. This also means that you don't have to drop the table again when you're done testing.
Long winded way...
create table t as (select 1 id from dual union select 2 from dual union select 3 from dual);
select * from t;
drop table t;Simple way...
with t as (select 1 id from dual union select 2 from dual union select 3 from dual)
select * from t;The sample data is only in existence for the duration of the query, and it saves all of us here on the forums who answer peoples questions from creating loads of tables on our databases temporarily.
;)

Info about the RFC

Hi,
I have to work on RFC FM. Can any body give me the info about the RFC? especially for Function module?
Will give Reward points
regards,Ram

Hi
RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
and you will be passing an Import parameter DESTINATION to it.
Other code and usage will be similar to any fun module;
Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
Refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm
Function Modules doc
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Reward points for useful Answers
Regards
Anji

Info about Tr Cd : PFCG

I need some info about Tr Cd : PFCG. If anybody can send any document or give some link that will be very helpful.
Thanking you in anticipation.
Regards,
Subhasish

HI Subhasish,
     Tr. Code PFCG stands for Role maintenance.
     This is basically used by the Basis team.
     You can create simple and composite roles using this transaction .
     You can describe the functions that the role is to include .
      You can assign transactions to the role on the menu tab .
      The menu options selected in this step are displayed in the session manager
      and on the 'SAP easy access logon screen as the User menu for all users
       who are assigned to the role .
Reward if useful !
Thanks
Ranjita

Which log file will give the info about what is missing in sales document

Hello SAP gurus
I am trying to send a quote from our application to get saved in SAP using .Net Connector. I get the following error messages
S V4 233 SALES_HEADER_IN has been processed successfully
S V4 233 SALES_ITEM_IN has been processed successfully
W V1 555 The sales document is not yet complete: Edit data
I am looking for any kind of incompletion log that will give more info about what is missing etc.,
Where can I find such a log. Your feedback will be greatly appreciated.
Tks
Ram

Hi,
Just check this path.
Go to sales order->Edit->Incompletion log.
This tells your docuement status. If at all your document is incomplete,you can just see what all you are missing.
Thanks
KV

How to Use NDS Tool and create a very simple application

Hi All,
Today i have Installed NDS on my machine,but i dont know
how to use it,is there any guide inside NDS which gives me step by step procedure to create a simple application.
Can any link help me know about this.version of NDS is 2.0.9.Is this latest one?
I am pretty confused about NDS and PDK,if NDS can be used to develop java apllications ,then whats the need of PDK at all?
Thanks in Advance
Rani A

Hi Rani,
The Portal Development Kit (<b>PDK</b>) provides documentation and examples with source code to demonstrate how to develop portal applications and portal content for the SAP NetWeaver Portal using the <b>SAP NetWeaver Developer Studio</b>.
PDK includes coding examples on the following topics:
*Creating Portal Components and Portal Services,Portal Profiles,Resources,Internationalization,Portal Beans,Page Builder,EPCF,Application Integrator,Connector Framework,Portal Navigation,Object Based Navigation,Transformation Service,User Management etc
PDK is for deployment for portal application, has very good documentation of portal development, contains sample application, Java Docs for all the apis for portal and KM and plugins for eclipse(which you don't need if you are using NWDS). It is basically a nice help for developer along with an iviews for uploading par and testing them.
In EP 6.0 it is just business package that you import to your portal. This will then give a "java development" role in portal which can be assigned to users. The role will then create a tab called "Java Development" in the top navigation and click on it you can see all the contents underneath.
If u want to see the application on which an iview is based on import that par file into NWDS.
Regards,
Pooja.

My macbook pro is lagging and freezing constantly in simple applications.

It just happen very recently and out of nowhere. Simple applications like word and finder where becoming really slow and just scrolling up and down seem to take several minutes. Most applications require me to use activity monitor to force quit. Booting up takes about several minutes. I have about 250gb free and have checked constantly the CPU and how much RAM my mac uses(2.00gb free of 4gb). I also have done repair permisions without any problems. Please help. Thanks in advance.

Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 7:3:22
Disk Information:
          TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (367.51 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Startup Items:
          HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.mice.360Daemon.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          Steam
          iTunesHelper
          Dropbox
          Google Drive
          AirPlayitServerManager
          HP Scheduler
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
          AdobePDFViewer: Version: 10.1.9 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
          Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
          DirectorShockwave: Version: 11.6.5r635 3rd-Party support link
Safari Extensions:
          Cuevana Stream: Version: 4.2
          Ebay Shopping Assistant: Version: 1.1
          Searchme: Version: 1.2
          Slick Savings: Version: 1.0
          Amazon Shopping Assistant: Version: 1.1
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              16%          CVMCompiler
               6%          storeagent
               2%          Microsoft Word
               1%          Google Chrome
               1%          Microsoft AU Daemon
Top Processes by Memory:
          156 MB          mds_stores
          135 MB          com.apple.IconServicesAgent
          127 MB          softwareupdated
          119 MB          Google Chrome
          71 MB          Microsoft Word
Virtual Memory Information:
          915 MB          Free RAM
          1.71 GB          Active RAM
          781 MB          Inactive RAM
          642 MB          Wired RAM
          1.89 GB          Page-ins
          0 B          Page-outs

5000 $ for info about the "MUI" resource

Problem: missing documents from Microsoft
Offer: 5000 US-$ for the guy who can find the information
Description:
On https://msdn.microsoft.com/en-us/library/windows/desktop/ms648007(v=vs.85).aspx you can find all resource formats (binary) that you need if you want
to build an exe/dll and use them on Windows... but, they missed one... it's a new one and it only exists since Vista (maybe XP, I'm not sure... but that's not the point). The missing resource is the "MUI" resource (it's a named resource and the name
is "MUI").
Microsoft describes how to split resources into 2 parts (the neutral and the language specific part) which would generate such a MUI resource. The problem is, that this is not working the way they describe it (generates damaged data) and rc.exe
has also other "incapabilities" (e.g. compiling DialogTemplate's). But without the info about how to create the MUI resource by hand, it's almost impossible to create good quality multilingual applications.
That's why I want to offer the money to who ever is able to find this information (I guess it must be an employee of Microsoft, because I guess outside of Microsoft it's hard to find this info... maybe it's only "documented" in the source code
of tools like rc.exe or muirct.exe).
Contact me if you have the info... (this info cannot be classified... but if it is, it would be nice to hear an explanation of Microsoft, why an API which all of us SHOULD use according to Microsofts documents is not publicly documented).
thanks a lot... I hope to hear from someone soon...

Problem: missing documents from Microsoft
Offer: 5000 US-$ for the guy who can find the information
Description:
On https://msdn.microsoft.com/en-us/library/windows/desktop/ms648007(v=vs.85).aspx you can find all resource formats (binary) that you need if you want
to build an exe/dll and use them on Windows... but, they missed one... it's a new one and it only exists since Vista (maybe XP, I'm not sure... but that's not the point). The missing resource is the "MUI" resource (it's a named resource and the name
is "MUI").
Microsoft describes how to split resources into 2 parts (the neutral and the language specific part) which would generate such a MUI resource. The problem is, that this is not working the way they describe it (generates damaged data) and rc.exe
has also other "incapabilities" (e.g. compiling DialogTemplate's). But without the info about how to create the MUI resource by hand, it's almost impossible to create good quality multilingual applications.
That's why I want to offer the money to who ever is able to find this information (I guess it must be an employee of Microsoft, because I guess outside of Microsoft it's hard to find this info... maybe it's only "documented" in the source code
of tools like rc.exe or muirct.exe).
Contact me if you have the info... (this info cannot be classified... but if it is, it would be nice to hear an explanation of Microsoft, why an API which all of us SHOULD use according to Microsofts documents is not publicly documented).
thanks a lot... I hope to hear from someone soon...
just to make it clear: I'm talking about the "MUI" resource that's embedded in an multilingual exe/dll and the corresponding resource-dll (in this case it has the ending .exe.mui or .dll.mui). I'm not talking about the .mui file itself. (see
http://rcecafe.net/?p=266 for more information or contact me if you want to get a bether explanation why it is a problem not having this information -> by the way: it has been confirmed by the Microsoft
support team, that this is information is missing and that it is a problem for the development of MUI software -> they suggested to contact/bother the developers privately to get the information... because other possible ways to get the info that they
could imagine, aren't legal)

Cairngorm 3 Simple Application doubt

Either I am missing something OR there might be a good reason for the following:
SaveContactEvent/SearchEvent etc does not extend any Event class, then why we should be calling them events. It is ambiguous and leads to a lot of confusion. These could be appended with something else, but not event.
More about Cairngorm 3 (in general):
There are multiple libraries such as Observer 1.8 and ObserverParsley 1.8.
Do I need both of them to be included in my app OR one of them will fullfil my need based on some preconditions?
Cairngorm 3 provides guidelines and various approaches to handle multiple problems, but same time it is much more confusing to get started with a simple application.
Every lib has it's own docs, but atleast they all could be combined under an umbrella "cairngorm docs" providing a single landing page to get an access to all the different libs.
Thanks.

Some of our projects append them with *Message as they are really Parsley Messages not Flex events. Would you prefer that better or do you have another suggestion? Insync indented to use the Event suffix in a more logical meaning. Technically, they could also be subclassing flash.events.Event, but Parley's messaging doesn't require that.
Can you explain in what situation that caused you confusion though? Did you try to dispatch a Parsley message via the display list?
Regarding the Observer libraries, we should improve our documentation to make this clearer. If you read the how-to document, only the last paragraph: "Loosely Coupling Parsley Domains - Parsley Extension" describes an extention that lives within ObserverParsley and therefore requires Parsley. The rest of the Observer library is framework independent and contains all the other components described.
Have you seen the Introduction paragraph in Guidelines? Those explain the core concepts. Many of the libraries are optional so we don't want to imply users "have" to use all of them. The libraries section is the single entry point for all libraries.

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

Simple Application Info (About Solids)

Similar Messages

Maybe you are looking for