Simple audio "mapping" has me stumped

I have mono audio recorded on Ch 1 & 2 of my source video and want Premiere to "map" Ch1 to Ch1 and Ch2 to Ch2. The default seems to be both to Ch1 (see pic). I know it's simple, have tried searching for the settings, but I'm stumped

The HDV was originally recorded on a Sony Z1U a few years ago and digitized via FCP7. I"ve been happily editing with the footage in Premiere 5.5 with no audio issues. So after some sluthing I guessed I still didn't understand all the subtle nuances with the new audio in CS6.
Yesterday I did a test and routed the audio directly through the MacPro line out and it plays on both channels, but combines both, rather than keeping the left/right seperate. When I play the clip in the source monitor in Premiere the meters in Premiere show correctly, not combining them, with one channel being hotter than the other. Yet the audio when routed out the LHi, both analogue and SDI are Channel 1 only.
I also tested changing one (of hundreds of HDV clips) to stereo and then it plays correctly. From the best I can tell the LHi card is simple doing what Premiere is telling it to do.
Thanks for taking the time to post Jim! I'll look at the pan/balance and see, but I'll have to see if I can change all the clips in one go. I guess this is done in the audio mixer panel, at least that's the only way I've seen to do it (and frankly keep forgetting its there). My brain still thinks some like FCP

Similar Messages

Change Default Surround Sound Audio Mapping

Anyone know if there is a way to change the default surround sound audio mapping in Premiere CS6?
For example, when working with six mono channels being sent to a 5.1 submix. I manually set where each of the six go (front left, front right, center, lfe, rear left, rear right). Then I route that 5.1 submix to go to a stereo submix so that I can hear the downmixed audio in my laptop speakers. When my project is exported to a video file, I turn off the last step of routing the 5.1 submix to the stereo submix, so the file has all six channels of audio in their proper place. When I change the 5.1 submix to feed the master output, I get the option to re-select where each surround element should end up in the master output. In our production facility, we have surround in the order I mentioned previously. I noticed that Premiere has the front, then rears, and then center and lfe listed. It is annoying to have to re-select my surround preferences everytime I switch between monitoring the stereo downmix and the surround output.
Any way to change what Premiere sees as the proper order for surround sound channels? I know there's the audio option to change mapping, but when working on a laptop, you only get the left and right speaker, no surround settings there.

that's tied into our entire facility audio spec, and every video file we have would have to change audio mapping, in addition to re-wiring a lot of air-chain devices.
In broadcasting, it seems like it's more common to do surround sound the way we're doing it: L, R, C, LFE, Ls, Rs. I understand why some might want to do it another way, which is why it would be nice to be able to change it and leave it a certain way. I know I can submit a feature request, I'm just trying to find out if anyone knows how to do it already.

Seemingly Simple Audio Edits Driving Me Nuts

I have asked about this before, thought I had the proper answer, but alas it would seem not.
After joining audio (in most cases for music transitions) into Connected Storyline, I am often then unable to apply a Transition of perform a Roll Edit because it seems there is a space in there somewhere. I have tried the suggested remedy of Zooming in, using Position Tool to trim both sides of the edit, then deleting the space in between. It was explained the problem invovles sub frames which aren't always visible. Sometimes this works. It seems like there should be a quicker solution (it's especially cumbersome if your edit is otherwise well timed, and you have to re-tweak it once you pull the edges back,) but if it worked consistently I could live with it.
However, far too frequently, the process is not working, and I am redoing it over and over and over again until somehow it manages to take. I can end up spending 5 to 10 minutes on a simple audio edit, and needless to say, this is just unacceptable.
Can anyone tell me a reliable way to deal with this, or suggest what I might be doing wrong or something different I can try, because this is making me crazy. There has got to be an easier way. Any help appreciated.

dont think ive ever been able to get cross dissolves on audio to work. I now use FCPX as I would Logic or ProTools and I overlap audio clips and put manual fades on them. Actually its worth the extra work coz the joins are usually better. and you have ore control.
adam

AUDIGY 2 with 4.1 speakers: only stereo ! And Audio Console has no speakers listed. H E L P

I have a new desktop, OS Windows Vista Home Premium 32 bits, an Intel Quad Processor GB of memory. Everything runs very well except my audio card Creative Audigy 2. I installed ONLY the indicated (by creative site) driver but with a 4. speakers system I only can ear stereo (in the 4 speakers) and Creative Audio Consolde has no options to show me at the separator where I should select my speaker system. Please, do help me !RegardsCarvalhais RiccaPortugal

hey sorry to disappear. i got buried b work. but the problem was simple to resolve. in the arrange window on the bottom left there is a speaker icon that mutes stereo output, when selected. i was looking for all of the mutes and solos, including on the stereo bus, but only in the mix window.
my bad. thnaks for the help.
rx

My audio/sound has been erratic for a while and now I have no output Help!

My audio/sound has been erratic for a while, both output and input, sometimes one would worked but not the other and sometimes both would be none excitant.
System preference does not show what I have connected aka external speakers or headset and the sound output in menu is grayed plus the output on system preferences output as well, sound input looks ok now.
Had Tiger, so I upgraded to Leopard to see if that would helped, Output use to come back after a while, however now input works but output hasn't worked for days, I can hear sound when I am rebooting or starting the computer, but its gone right after.
Since the Mac its fame for their audio stability, no ones seem to know how to solve the problem, so I am kinda desperate.
I have tried the following; ran repair permissions, looked for fluff lol!....still cannot fix the glitch. Any new ideas please!!
Thanks in advance!

Since the problem existed before installing Leopard, it is clearly a hardware problem. Updating a broken system does not fix it, in fact many times it makes it worse or at least harder to diagnose.
I suggest you repost in the appropriate hardware forum - in your case the G4-17 forum(s) here:
http://discussions.apple.com/forum.jspa?forumID=1022
and the general G4-17 forum here:
http://discussions.apple.com/category.jspa?categoryID=138

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

Why doesn't Apple supply a simple audio recording app with the iPad? (Garage Band is not simple app)

I am going to be teaching an integrated media production course in the spring semester (creating an online college newspaper) and I want the students to use mini iPads to create images, videos and sound clips. Images and video, no problem. Easy to move to our iMacs in the lab for editing and inclusion in a college newspaper web site. On the other hand, audio is a mess. Sure, I can have them shoot video, import the video into Final Cut on the iMacs and then use Final Cut like an audio editor, but that is pretty lame. They could download Garage Band but that would require all the students to have iTunes accounts, which is a real pain. And moving audio recording made with Garage Band to the iMac is a real drag and way too much work. Why the **** can't Apple include a simple audio memo program in the basic iPad app setup? This is really old school stuff that was on computers way back when. Using Garage Band for that simple function is like swatting flies with a sledge hammer.
Mike Nielsen
Media Arts
Wesley College

Make finding a simple audio recorder the students first assignment. Have them give presentation. Have file a news story to the 'paper'.
Google is your friend.
ipad audio recording app free
http://howto.cnet.com/8301-11310_39-57349000-285/five-free-voice-recording-ipad- apps-compared/
ipad audio recording app
http://www.appolicious.com/curated-apps/7909-best-ipad-audio-recording-apps-jan- 2013

Looking for a simple audio reciever for my Airport Express!

Im looking for a very simple audio receiver.
I dont need a ton of bells and whistles. I just need a small receiver I can plug my Airport Express into, and then some speakers from it.
I dont need multi things like DVD, AUX, TAPE, CD, TV and all of that. I just need one... Dont need AM/FM... just a box to plug to airport express, to some speakers, on/off switch, audio up/down....
I am basically going to put airport expresses all over my house, then find this audio receiver I am describing, hook speakers to it and call it a day.
Does anyone have ideas for this? I have checked the major electronics stores and I am not able to find anything that is this small and subtle.
Any ideas would be great! THANK YOU

I have these for my office
http://www.amazon.com/Soundsticks-II-3-Piece-Multimedia-Speaker/dp/B0001DBEM4/re f=sr11?ie=UTF8&s=electronics&qid=1215628701&sr=1-1
Sound is very good and they look kewl but expensive.

Power Map has encountered an error and it needs to close, after changing the graphic settings

I've been using the updated Power Map tool successfully over the past few days.
Last night I was playing around with the graphics settings that can be found under the File Tab (I know that should teach me from playing around and following the user guide :-) ) and I changed the detail from Medium to High (I think) and now all that happens
when I click on create a new tour or select an existing tour is
"Power Map has encountered an error and it needs to close. Power Map can collection information about the error and create an e-mail which you will be able to send to Microsoft and help us fix the problem. Do you want to do this?"
The error that gets generated can be seen below.
Thank you for submitting this error information to Microsoft. We appreciate your help!
System.Exception: Could not create the render target shared resource.
   at Microsoft.Data.Visualization.Engine.Graphics.Internal.D3DImage11.SetBackBuffer11(IntPtr pResource)
   at Microsoft.Data.Visualization.Engine.Graphics.D3DImage11.SetBackBuffer(RenderTarget renderTarget)
   at Microsoft.Data.Visualization.VisualizationControls.GlobeViewModel.CompositionTarget_Rendering(Object sender, EventArgs e)
   at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
   at System.Windows.Media.MediaContext.AnimatedRenderMessageHandler(Object resizedCompositionTarget)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
I've removed Power Map from the system, restarted, repaired Office, restarted and reinstalled Power Map but the problem remains. So i'm guessing that the setting I changed are stored in the Registry or File System somewhere.
Any help would be gratefully received.
Regards
Rob Ireland

Is this still an issue?
This also might be worthy to send to the team as a bug.
You can send it in email using the Smile/Frown feature in the UI.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Overflow Map has received an inexplicable event from the front map

Hello, I am posting this to ask if someone can shed additional light on this error. Is it due to incorrect usage of the SafeNamedCache or an internal error?
2006-12-07 20:33:59.190 Tangosol Coherence 3.1/339 <Warning> (thread=RMI TCP Connection(3)-127.0.0.2, member=1): Overflow Map has received an inexplicable event from the front map; such an event should not have been possible to occur. The Overflow Map will arbitrarily interpret the event in order to maintain its own internal consistency. The likely origin of the event is direct modification of the front and/or back maps managed by the Overflow Map, a MapListener making re-entrant modifications to its source map, or an ObservableMap implementation that reacts to the Map API in a manner inconsistent with the specification (e.g. actively modifying its contents in a manner that differs from the sequence of API calls made against it). This Overflow Map instance will not repeat this warning, and will attempt to silently compensate for subsequent similar event irregularities.
Event: MapEvent{ObservableHashMap added: key=CalypsoCache|22845412, value=Lease: CalypsoCache|22845412 (Cache=TangosolLock._locks, Size=Unknown, Version=0/0, IssuerId=0, HolderId=0, Status=LEASE_UNISSUED, Last locked at Wed Dec 31 16:00:00 PST 1969)}
Stack trace follows:
at com.tangosol.net.cache.OverflowMap.warnUnfathomable(OverflowMap.java:2947)
at com.tangosol.net.cache.OverflowMap.putInternal(OverflowMap.java:1001)
at com.tangosol.net.cache.OverflowMap.put(OverflowMap.java:360)
at com.tangosol.coherence.component.util.CacheHandler.ensureLease(CacheHandler.CDB:15)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.ReplicatedCache.lockResource(ReplicatedCache.CDB:29)
at com.tangosol.coherence.component.util.CacheHandler.lock(CacheHandler.CDB:3)
at com.tangosol.coherence.component.util.SafeNamedCache.lock(SafeNamedCache.CDB:1)
at com.calypso.tk.lock.TangosolLock.acquire(TangosolLock.java:24)
at com.calypso.tk.lock.DistributedReentrantLock.acquire(DistributedReentrantLock.java:50)
at com.calypso.tk.util.cache.CalypsoCache.lock(CalypsoCache.java:1772)
at com.calypso.tk.util.cache.CalypsoCache.getImpl(CalypsoCache.java:1325)
at com.calypso.tk.util.cache.CalypsoCache.peekImpl(CalypsoCache.java:1320)
at com.calypso.tk.util.cache.CalypsoCache.peek(CalypsoCache.java:244)
at com.calypso.tk.util.cache.CalypsoCache.put(CalypsoCache.java:314)
at com.calypso.tk.core.sql.BookSQL.putInCache(BookSQL.java:314)
at com.calypso.tk.core.sql.BookSQL.loadAll(BookSQL.java:1494)
at com.calypso.tk.core.sql.BookSQL.loadAll(BookSQL.java:1158)
at com.calypso.tk.core.sql.BookSQL.load(BookSQL.java:1186)
at com.calypso.tk.core.sql.BookSQL.getBook(BookSQL.java:545)
at com.calypso.tk.core.sql.BookSQL.get(BookSQL.java:237)
at com.calypso.tk.refdata.sql.UserDefaultsSQL$UserDefaultsLoader.buildObjectFromResultSet(UserDefaultsSQL.java:307)
at com.calypso.tk.core.sql.SQLObjectPersistor.executeSQL(SQLObjectPersistor.java:399)

It is quite strange, of course, to have confusion with which config is being used, which is why there is now a log message telling you which config was loaded. I think that the log message was introduced in version 3.1 or 3.2.
The other thing that I do (at least when testing something) is specify the config on the command line, e.g.
java -server -Xms128m -Xmx128m -Dtangosol.coherence.cacheconfig=C:\java\dev\test-cache-config.xml -cp coherence.jar;tangosol.jar;...
BTW, I have downloaded 3.2.1 and will be using that for my tests. So presumably the warning/error will no longer occur? That is our expectation, since it would be a bug (unless you were doing one of the weird things mentioned in the message).
Keep in mind that even with the message, the Overflow Map keeps going; it is just a warning (albeit a complicated sounding one) that indicates that some internal state (or event stream or lack thereof) is not what was expected as the result of one or more actions.
I apologize for the inconvenience, and thank you for taking your time to clarify it. We do work hard to avoid this type of issue (or any related confusion), and we have continued to increase our unit and regression test coverage with each release, including with respect to this issue. With that in mind, please do not hesitate to contact us (on this forum if you would like) with suggestions and other feedback; we do want to be aware of the things that our customers are looking for and would like to see improved.
Peace,
Cameron Purdy
Tangosol Coherence: The Java Data Grid

4 Simple Flash Questions that Are Stumping Me!

What is the Frame Rate for Web Animations
Q1. I am making an animation which will be played on the web. What is the default frame rate (fps) of Flash CS5? And what is the frame rate of for web?
Q2. My animation needs to be 30 seconds long. So at 15 fps that would mean I need to use 600 frames in Flash?
How Do I Mask everything so all I see is the Content on the Stage?
I have a wide image that extends past my movies stage size so when I preview my movie the image is visible. How do I mask out anything that extends past my movies window size? I believe I can create a layer named "mask" and place it above all other layers, but I forget how to make the mask. Any help is appreciated.
How to Fade a Graphic
I have a graphic element (some type) and I want it to fade from 0% to 100%. In older versions of Flash I could just select the symbol and then set it's alpha value to 0%, move a few keyframes and then set the alpha to 100%. Voila! but now it doesn't seem to work that way. How can I do this in CS5?

Ned, it says 24 fps which means there is 24 frames per second so each 24 frames is 1 second.
Date: Fri, 4 Nov 2011 05:35:16 -0600
From: [email protected]
To: [email protected]
Subject: 4 Simple Flash Questions that Are Stumping Me!
    Re: 4 Simple Flash Questions that Are Stumping Me!
    created by Ned Murphy in Flash Pro - General - View the full discussion
1 You can create your character as a movieclip and copy/paste that movieclip from one file to another. 2. One way to create a movieclip is to copy all the frame of the animation's timeline (select them all, right click the selection, choose Copy Frames), then create a new movieclip symbol (Insert -> New Symbol...etc) right click on its only keyframe and chhose Paste Frames. THat will put all the layers and frames you copied into the movieclip The only way to come close to being certain about the timing of you animation is to use code to keep track of the time, something like getTimer().. The frame rate that a file plays at is not a reliable means of dictating the time it takes due to a variety of factors which include the amount of content you are trying to process and performance limits of the user's machine.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4007420#4007420
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4007420#4007420. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Simple audio CD player for Gnome

Is there a simple audio CD player for gnome which can get the disk information from any CDDB server like in many other linux distributions?

Is there a simple audio CD player for gnome which can get the disk information from any CDDB server like in many other linux distributions?

Unfortunately Maps has stopped

Hi,
Just recieved the smartwatch 3 yesterday.
I'm having huge problems where it keeps telling me "Unfortunately Maps has stopped" which is making this next to useless !
Software in smartwatch 3 4.4W2
Andriod version in samsung galaxy s4 - 4.4.2
Can anyone advise before this is returned ! ???
Thanks
Solved!
Go to Solution.

Your SW3 should be running 5.0.2 - Just because it says Sony doesn't mean it's Sony software as the Watch is updated by Google and Android wear
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

I can't find a way as simple as IE has to "print preview" enable to just print what I highlight. Thanks

I can't find a way as simple as IE has to "print preview" enabling me to just print what I highlight. Thanks

Sorry, you can't "preview" a highlighted selection. You either select choose '''''Selection''''' in the Print Range section of the "native print dialog" box ''(below Pages from:__ to:__ )'' and print it directly from that dialog box, or you do a Print Preview of the entire web page.

Simple java-mapping

can i have a file2file scenario which uses simple java-mapping. As i m new to Java, jus wanna learn how it happens.
I wanna know how to code the Java mapping .....and how to utilize it in the Interface Mapping.....
I know a bit of DOM parsing..

Hi,
see the below links
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
DOM parser API
http://java.sun.com/j2se/1.4.2/docs/api/org/w3c/dom/package-frame.html
Check this blog on Mapping:
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
Also, check this thread for more info,
Different types of Mapping in XI
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fxi%2fxi-design_configuration%2ffileValidationsinSAPXI-ACaseStudy.pdf
http://www.cafeconleche.org/books/xmljava/chapters/ch09.html
http://www.cafeconleche.org/books/xmljava/chapters/ch06.html
Check these blogs for reference..
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
java mapping /people/amol.joshi2/blog/2006/03/10/think-objects-when-creating-java-mappings
Regards
Chilla

Simple audio "mapping" has me stumped

Similar Messages

Maybe you are looking for