Simple audio with video recorded on built in camera and mic

New to imovie 09 ( or any version) need to video tape a presentation with audio - video is ok, can not figure out how to listen to the audio or make the video full screen. HELP

Hope info from this article is helpful.
http://support.apple.com/kb/HT2090
Reset SMC.     http://support.apple.com/kb/HT3964
Choose the appropriate method.
If this does not help, contact Apple.
Best.

Similar Messages

  • No audio with video recordered by camera

    Hello!
    I have problem with recording a video by camera, there is no audio or any clear sound for the video i have recorded!!
    Help please!

    Note that there are a lot of popular extensions that can cause issues with videos not working apart from issues with the Flash plugin.
    In what way is the navigation not working properly?
    Can you give some examples?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • How to use the built-in camera and mic for commercial video conferencing

    I would like to use the camera and microphone to join a commercial video conference - not iChat. How do I do that?

    Hi
    Dont know, you dont say which commercial video conference software is involved.
    Tony

  • No Audio on Videos Recorded with OS 2

    Hello After a few days with the version 2 I just realized that when I transfer the videos  I recorded with my PB to my MAC, the videos dosen´t have audio.
     All the videos recorded with the OLD PB version does have audio.
    I have PB 2.0.0.7971 and Mac OSX 10.7.3
    Thank you.
    PS. All videos work great on PB.

    No, I imported by two different ways:
    1.- Direct from PB as USB.
    2.- Importing media from BlackBerry Desktop Software.
    In both cases same result no audio in videos recorded with PB 2.0

  • No audio with video, website navigation impaired, I can no longer recommend Firefox

    I maintain the video site shaleshockmedia.org. I can no longer recommend Firefox to viewers because of the severe problem I have been experiencing: No audio with video; navigation often does not work. Maybe this is purely a local problem. Please let me know if the site is fully functional or not when you go there. There is no problem with Chrome or Safari. My computer is a Macbook Pro 3,1 Intel Core 2 Duo. MacOs 10.6.8

    Note that there are a lot of popular extensions that can cause issues with videos not working apart from issues with the Flash plugin.
    In what way is the navigation not working properly?
    Can you give some examples?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Best way to sync (shift to match) audio with video in FCE 1.01?

    What is the best way to sync (shift to match) audio with video in FCE 1.01?
    Step by step in simple wording please, since I am new at this.
    Thank you so much.
    Walter

    As you probably know by now, DVD camcorders are not compatible with FCE or pretty well any other DV based editing system.
    Possibly the simplest (though not cheapest) route would be by using an Analogue-Digital converter.
    Streamclip and other similar programs are supposed to work but I have had no experience with them.
    In the long run probably the best (but costly) solution would be to buy a Mini-DV camcorder - it doesn't have to be a top of the range model - even the cheapest ones can produce high quality video. Then you would not have to mess around converting DVD files with the inevitable loss of quality it entails.
    A cheap DV camera need be not much more expensive than an A/D converter.
    Ian.

  • I have 3 DVDs with videos recorded in mpg format. My Mac will not play them and says I may need to download software. Does anyone know what to do to play the DVDs.

    I have 3 DVDs with videos recorded in mpg  format. My Mac says it cannot play them and I may need to download additional software. Does anyone have any suggestions on what to download or do to play them?
    naomifromnewyork

    VideoLAN - Official download of VLC media player for Mac OS X

  • Syncing External Audio with Video on iMovie

    If syncing external audio with video on imovie, once successfully syncing the 2 is it possible to permanantly merge them so that I can continue trimming and rearranging clips without having to continue to re-sync the audio and video after every change I make?

    In Final Cut Pro X, yes. In iMovie...no.
    The workaround in iMovie is to sync your external audio to the video clip. Mute the audio on the video clip so all that is left is the good audio. Then use SHARE/EXPORT TO QUICKTIME. Choose Movie to QuickTime Movie and under Options choose Apple Intermediate Codec as the Video Codec.
    Then save this clip in a place you can find it. Finally, import this new clip back into your event.

  • TS1382 does the latest ipod classic play audio with video on an alpine ive-w530abti head unit

    does the latest ipod classic play audio with video on an alpine IVE-W530ABTi head unit

    According to the compatibility chart on this page, yes it does.
    http://www.crutchfield.com/S-OhTD03kplzN/p_500IVEW530/Alpine-IVE-W530.html#detai ls-tab
    B-rock

  • No Audio on built in camera and microphone

    please help iMove has no audio every time i try to use the built in camera and microphone to record straight in.... there is NO AUDIO !!

    SophiaSlater wrote: ... iMove ... record .... there is NO AUDIO !!
    (0) Unless you are trying to use an old external (Firewire) iSight, there is no need to post in the iSight forum.  Unlike external iSights, MacBook Pro built-in cameras don't have integrated mics.  MBP's mic is a separate device from its inbuilt camera.
    (1) Use iTunes, Safari, or QuickTime, etc. to verify audio OUTPUT is working on playback outside iMovie.  If not, check your speaker volume and mute settings.  If you use external speakers or headphones, check their connection, settings, and power switches.
    (2) Record a short audio test using a non-iMovie app like Photo Booth or QuickTime X to see if it works.  If iMovie is your only trouble, and if the following suggestions do not resolve your issue, you may need to reset iMovie preferences or even reinstall the iMovie app.
    (3) If your audio trouble is ONLY in iMovie check iMovie's VoiceOver audio settings.
         • Verify you are using the correct "Record From:" audio input source.
           (Yours choices may differ from those shown in the image above.)
          • Also verify that your "Input Volume:" is set loud enough.
    (4) If your trouble continues, also check your MBP's
          > System Preferences... > Sound > Input settings:
         • Verify you have selected the correct "sound input" device.
           (Yours choices may differ from those shown in the image above.)
         • Also verify that "Input volume:" is set loud enough so the
           "Input level" meter flickers when you speak.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • Up until approx 2 months ago I could select video clips downloaded from my camera and e-mail them.Iphoto9.4.3. This no longer works.  I have tried dragging to my desktop and exporting to my desktop.  I am not sure what has changed.  Any ideas?

    Up until approx 2 months ago I could select video clips downloaded from my camera and e-mail them from Iphoto 9.4.3. This no longer works.  I have tried dragging to my desktop and exporting to my desktop.  I am not sure what has changed.  Any ideas?

    Simply, sharing video via email is not advisable.
    Many email services have an attachment limit of 20mb and some a limit of 10mb. As emails are sent through an array of relays, the effective limit is the smallest file size allowed on any of the relays.  That means that video is rarely suitable for emailing.
    Then there's the whole issue of Codecs and not all machines will have the codecs to play all videos. Plus, folks with slower connections can find it very inconvenient to download large video files.
    Finally, sharing video from iPhoto via email is not supported. All that gets you is the Movie thumbnail. If you feel you must share via email then you'll need to export the video first, and attach that. Use the File -> Export command and set the kind  to Original.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.
    Other than that your options include:
    Upload it to a sharing site like YouTube or Vimeo and email a link - these will allow the recipient to view the material online. That will avoid the codec issues mentions, and the person can still download the video file if they wish.
    Upload it to sharing services like Dropbox or YouSendIt and email a link. This will require that they download the material to their machines to view.
    Regards
    TD

  • Why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

    why is my  built in webcam and mic on my hp pavilion dv6-6113cl not working?

    Enter the device manager and verify that the webcam is present and has a driver installed.
    1) Test your webcam by using the YouCam software that was delivered with your notebook. (you should also be able to test it with MSN or Skype setup). You may have to uninstall it and then reinstall the software. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP Pavilion G4 Series Built-In Keyboard and Mice isn't Working

    The built in keyboard is working in BIOS but when it's starting up with the OS isn't working the built in Keyboard and Mice too, i didn't know how to fix it, i already tried to uninstall the Keyboard then Reboot, doesn't working, i also tried the remove the battery and ac adapter holding on the Power Button atleast 30secs., Please Please Please Help Me!!! Thanks in advance

    @BlackEsq 
    Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • Replace audio with separately recorded audio and sink it with video and original audio

    I have recorded the audion with a high quality digital recorder.  How do I replace the audion taken with my video camera?  and make sure it is in sink with the video.

    Once you have followed Steve's steps, to adjust the sync perfectly, see this article: http://forums.adobe.com/thread/436751?tstart=120
    Now, some users have found that their cameras, and their separate audio recorders do not sync 100%. With today's technology, they certainly should, but camera and recorder companies do not see to care, so leave the task to the editor. One user found that his Zoom recorder was about 0.06% slower than his Panasonic cameras, by trial and error, and critical listening. This was a constant sync error. To correct, he changes the speed of the Audio 1.04%, with Maintain Pitch checked - then it is always perfect. If you find that you cannot maintain perfect sync, explore speed settings for the Audio. If the recorder is a high-quality, the OOS (Out Of Sync) should be constant, and when you find the correction, it should be the same for all projects, so the trial and error should pay dividends.
    Good luck,
    Hunt

  • HT4946 audio issue with iphone 4 with video recording

    audio issue with iphone 4 with video recording

    http://www.iphonebackupextractor.com/
    Basic troubleshooting steps.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Maybe you are looking for

  • Inbound delivery deletion

    Hi, We are following the following process. POInbound delivery-Invoice posting(PO based invoice)--GR In this process after invoice posting I am able to delete the delivery at header level. Can you suggest any userexit so that we can stop getting the

  • DBMS_SESSION.RESET_PACKAGE

    Hi Guru's, I was using DBMS_SESSION.RESET_PACKAGE in oracle version 9.2.0.6.0.It was working fine.But when that application is tested in after apply patch 9.2.0.8.0, its showing different face.All the global variables are cleared from the memory only

  • IDCS2 Mac Javascript - colorSettings question

    I have a script that works in MAC CS3 and CS4, but in CS2 this line breaks the script: app.colorSettings.cmsSettingsPath = TheFile;  //  This works in CS3 and CS4 I get this error in CS2: Javascript Error! Error Number: 1 Error String:  cmsSettingsPa

  • SetCurrentRowWithKey() throws error JBO-27035

    Hi experts, I am facing the issue in this line.. mstrDcIter.setCurrentRowWithKey(mstrCurrRow.toStringFormat(true)); No business component definition found with the given name in the project classpath : JBO-25058 null : JBO-27035 Situation : I am usin

  • Workflow through status change

    I have a Customer quotation which has different statuses in the system. When a quote is 'approved/rejected' i need to send a mail to distributor though workflow. Quote user status is written to change documents. status management --> customer setting