Simple Automation question

OK, I can't imagine that this is something that Logic missed out, probably just an oversight on my part, but Ive dedicatad some time to this and still no answer, so here goes:
I use Logic 8.0, Ive noticed that with the exception of volume level automation, NONE of logic's strip channel controllers get automated, including pan, busses, etc... In other words, I set up logic for Touch/Latch mode, I press play, if I move the volume level it will write nodes as it goes along, but if I try and manipulate any other controller, via the channel strip or external control surface I get nothing, the only thing i get is the OVERALL value of the specific controller Im trying to manipulate will move, but it wont "create nodes" as I go along, even when in touch/latch/write modes.
what am i doing wrong??
I also have problems when I try to assign an "other..." controller number in Hyper Draw, sometimes it freezes, and sometimes it just wont select a different controller, but simply stay on Bank MSB.
Can anyone here please shed some light into this matter?
Thanks!

zukodany wrote:
Can anyone here please shed some light into this matter?
Thanks!
As long as you shed some light as to what controller you're using...
I'm with a MC Control and MC Mix, and all the automation gets nodes on my machine, since 8.0.2, when I bought these units. I have not really used LP9 too much yet, so I cannot opine on that version's operation.
Cheers

Similar Messages

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Just a suggestion..........
Download Thunderbird. Easier to use when it comes to what you want to do w/your emails.

4 Simple Flash Questions that Are Stumping Me!

What is the Frame Rate for Web Animations
Q1. I am making an animation which will be played on the web. What is the default frame rate (fps) of Flash CS5? And what is the frame rate of for web?
Q2. My animation needs to be 30 seconds long. So at 15 fps that would mean I need to use 600 frames in Flash?
How Do I Mask everything so all I see is the Content on the Stage?
I have a wide image that extends past my movies stage size so when I preview my movie the image is visible. How do I mask out anything that extends past my movies window size? I believe I can create a layer named "mask" and place it above all other layers, but I forget how to make the mask. Any help is appreciated.
How to Fade a Graphic
I have a graphic element (some type) and I want it to fade from 0% to 100%. In older versions of Flash I could just select the symbol and then set it's alpha value to 0%, move a few keyframes and then set the alpha to 100%. Voila! but now it doesn't seem to work that way. How can I do this in CS5?

Ned, it says 24 fps which means there is 24 frames per second so each 24 frames is 1 second.
Date: Fri, 4 Nov 2011 05:35:16 -0600
From: [email protected]
To: [email protected]
Subject: 4 Simple Flash Questions that Are Stumping Me!
    Re: 4 Simple Flash Questions that Are Stumping Me!
    created by Ned Murphy in Flash Pro - General - View the full discussion
1 You can create your character as a movieclip and copy/paste that movieclip from one file to another. 2. One way to create a movieclip is to copy all the frame of the animation's timeline (select them all, right click the selection, choose Copy Frames), then create a new movieclip symbol (Insert -> New Symbol...etc) right click on its only keyframe and chhose Paste Frames. THat will put all the layers and frames you copied into the movieclip The only way to come close to being certain about the timing of you animation is to use code to keep track of the time, something like getTimer().. The frame rate that a file plays at is not a reliable means of dictating the time it takes due to a variety of factors which include the amount of content you are trying to process and performance limits of the user's machine.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4007420#4007420
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4007420#4007420. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Simple performance question

Simple performance question. the simplest way possible, assume
I have a int[][][][][] matrix, and a boolean add. The array is several dimensions long.
When add is true, I must add a constant value to each element in the array.
When add is false, I must subtract a constant value to each element in the array.
Assume this is very hot code, i.e. it is called very often. How expensive is the condition checking? I present the two scenarios.
private void process(){
for (int i=0;i<dimension1;i++)
for (int ii=0;ii<dimension1;ii++)
for (int iii=0;iii<dimension1;iii++)
    for (int iiii=0;iiii<dimension1;iiii++)
         if (add)
         matrix[i][ii][iii][...] += constant;
         else
         matrix[i][ii][iii][...] -= constant;
private void process(){
if (add)
for (int i=0;i<dimension1;i++)
for (int ii=0;ii<dimension1;ii++)
for (int iii=0;iii<dimension1;iii++)
    for (int iiii=0;iiii<dimension1;iiii++)
         matrix[i][ii][iii][...] += constant;
else
for (int i=0;i<dimension1;i++)
for (int ii=0;ii<dimension1;ii++)
for (int iii=0;iii<dimension1;iii++)
    for (int iiii=0;iiii<dimension1;iiii++)
       matrix[i][ii][iii][...] -= constant;
}Is the second scenario worth a significant performance boost? Without understanding how the compilers generates executable code, it seems that in the first case, n^d conditions are checked, whereas in the second, only 1. It is however, less elegant, but I am willing to do it for a significant improvement.

erjoalgo wrote:
I guess my real question is, will the compiler optimize the condition check out when it realizes the boolean value will not change through these iterations, and if it does not, is it worth doing that micro optimization?Almost certainly not; the main reason being that
matrix[i][ii][iii][...] +/-= constantis liable to take many times longer than the condition check, and you can't avoid it. That said, Mel's suggestion is probably the best.
but I will follow amickr advice and not worry about it.Good idea. Saves you getting flamed with all the quotes about premature optimization.
Winston

Can't get simple Automator actions (services) to work

I've been trying to get very simple Automator services to work in 10.6.2 but I can't. Here's an example.
I launch Automator, and hit Services, then choose:
Service receives selected: audio files in: any application.
Then add an action: Set Info of iTunes Songs, and fill in some of the fields. Then I hit save and give it a filename "iTunes Assign Info."
When I go to the Finder and right-click on an MP3, I see an option there for "iTunes Assign Info" and I select it, but it doesn't work -- the file never gets those properties.
Same thing happens for a similar action for graphic files:
Service receives selected: files and folders in: any application
Then I add some resizing and scaling actions. Then I save. I test by right-clicking on a JPG in the finder, choosing my action, but the action never takes effect.
What am I doing wrong?

David Das wrote:
On the 1st: an iTunes song is an MP3 (or AAC, or WAV, or AIFF). There's no difference.
oh yes, there is.
this is a computer program. it has to be precise. it only understand input of certain format which in this case is an itunes object not an mp3 file. the action uses scripting tools of itunes. it only works with with items in itunes library. and it says so. to use it you'd have to import the track into itunes first, change the title info and spit the file back out. there are scripts out there that do that. look here
http://dougscripts.com/itunes/
there may be one that does what you want there already.
And Automator allows such a file to be passed from the Finder to it. Plus the metadata gets written directly to the file (not to iTunes), therefore, that action should work. (The description doesn't say it won't; it slightly implies that it will.)
Anyway...
On the second (image resize), I should have mentioned that I tried it both with and without Get Selected Finder Items and neither works.
works perfectly for me as a service without "get selected finder items".

Help with simple Automator script

I have a simple Automator script for updating a specified folder with files from another folder. It consists of only two actions:
1. Get Folder Contents (from the folder I drop on the Automator executable).
2. Copy Finder Items.
I left the option "replace existing files" unchecked because there's no point in replacing a bunch of files that already exist (we're talking about 4000-5000 files in the source folder). I assumed that meant to ignore any existing files but, on the contrary, I found out that the script is copying duplicates of all the existing files -- making my target folder about 9000 files strong!
How do I get a command into the middle of this script to restrict the Copy Finder Items command to files that do not already exist in the target folder? (It would be even nicer if it could check for files that are older than the files being copied and actually replace (only) those as well.)
Any ideas?

If you need the Terminal window to stay open, then you're looking at scripting Terminal. You can do this with Automator's run applescript action, or you can just use Script Editor (in Applications > AppleScript). Either way you will need to save the workflow/script as an application and drag it to your Login Items (in System Preferences > Accounts).
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "Terminal"
activate
set commands to "cd /Users/lenny/ventrilo/
/Users/lenny/ventrilo/ventrilo_srv"
do script commands in front window
end tell</pre>
PowerMac G5 (June 2004) 2x1.8GHz 1.25GB, PowerBook G4 (12-inch DVI) 1x1GHz 768MB Mac OS X (10.4.3)

A few simple Logic questions...please help.

I have a few probably simple Logic questions, that are nonetheless frustrating me, wondering if someone could help me out.
1. I run Logic 8, all of the sounds that came with logic seem to work except organ sounds. I can't trigger any organ sounds (MIDI) on Logic, they won't play. I have a Yamaha Motif as my midi controller.
Any idea why?
2. I've starting running into a situation where I will record a MIDI track, the notes are recorded but they won't playback. The only track effected is the one that was just recorded. All other midi tracks playback.
I have to cut the track, usually go out of Logic and back in, re record for it to playback properly. Any idea why this may be happening?
3. How important is it to update to Logic 9. Are there any disadvantages down the road if I don't upgrade. If I purchase the $200 upgrade, do I get a package of discs and material, or it just a web download.
Any help is appreciated!
Colin

seeren wrote:
Data Stream Studio wrote:
3) You get a full set of disks and manuals.
They're including manuals now?
I think his referring to the booklets ...on how to install etc
It would be great to see printed manuals though ...I love books especially Logic/Audio related !!
A

Simple Quick Question

wrong section, post was moved.
Message was edited by:
Rob17

you titled "simple quick question"...
.. complicated to answer..
a) the TermsOfUse of the iTS don't allow any processing of purchased files, these are "copy protected"..
b) iM has a voice-over function..
c) iM is a video-edit app.. easy to use... just learn to handle it...
d) iM allows to "extract" audio (=muting the original audio, adding your own..)
e) to learn iM, spend some time here: http://www.apple.com/ilife/tutorials/imovie/index.html
f) use pencil and paper first! WRITE and scribble, what shall happen when in your movie/parody... make a script, draw a storyboard .. THEN launch iM.. in other words: think first, then edit.. iM is just a tool, it does not "create"... Picasso needed a papertowel and half a stencil to create art....
g) to get comfortable with iM, start with your own, small, short (3min!) project... import some stills, edit them, add a funny voice-over, add sounds, add music... good? make a bigger one...
h) .. in our Lecture II, we teach you how to import shows from TV, youtube, wherever..
standard disclaimer:
be nice to ©opyrights ...

Simple query question

hi all,
I have a XMLType table with one column - I have presently one row, in my column xmlsitedata I have stored one large xml file.The schema definition is given below:
<?xml version="1.0" encoding="UTF-8" ?>
- <xs:schema elementFormDefault="qualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
- <xs:element name="siteList">
- <xs:complexType>
- <xs:sequence>
<xs:element name="site" type="siteType" minOccurs="0" maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
</xs:element>
- <xs:complexType name="siteType">
- <xs:sequence>
<xs:element name="nameEn" type="xs:string" />
<xs:element name="nameFr" type="xs:string" />
</xs:sequence>
<xs:attribute name="code" type="xs:string" />
</xs:complexType>
</xs:schema>
I have executed the query below:
select x.XMLSITEDATA.extract('/siteList/site/nameEn/text()').getCLOBVal() "stName" from wsitelist x;
and I get all english names of some 200 locations, however, there is 1 row selected and all names show up on one row. How do I split them into 200 or whatever rows?
Thanks,
Kowalsky

Have a look at the answer provided in the following thread.
very simple XML question
This may solve your problem.
use xmlsequence.
Alvinder

Simple Automator+Applescript Question

EvoCam has a feature where when an event happens, such as motion, the app quits, starts, etc., it can run an AppleScript. I'd rather use automator, because it's just easier to understand for me. I wrote and automator workflow. However, as I mentioned, EvoCam only runs AppleScripts. Can someone give me an AppleScript to run an Automator workflow? I assume there is a way to run it. If not, I'll just save it as an app and have applescript run the app.
iMac Intel Core Duo 17" Mac OS X (10.4.8) iPod mini 2nd Gen 4GB

I was able to find the answer by using Script Editor's record function and then modifying the code it gave me.
iMac Intel Core Duo 17" Mac OS X (10.4.8) iPod mini 2nd Gen 4GB

Simple Report Question

Post Author: scott123
CA Forum: General
I want to take the information in a simple excel table and recreate it 3 times, each time sorting/grouping on a different columnHere is the tableAnd here is the report that I'm trying to generate (first sorted by name, alphabetically, then grouped by rank, then grouped by size) I'm comfortable working with excel tables in Crystal, but I'm running into a problem repeating the information and then sorting each group separately. I also have no problem doing each group in a single report (without repeating any records), but I'd like to include all 3 groups in a single report. My apologies for how remedial this question is- I thought for sure that Crystal could do this easily but I've spent a couple of days on this and am running into a brick wall.

Post Author: pandabear
CA Forum: General
That's right Scott, and maybe make them "on demand"
sub reports so the user only has to see the data they
really want at the moment. Gives the report a nice clean look too.
PB

A simple security question

I'm trying to write a simple self-signed applet that use a jca provider but thi exception "java.security.SecurityPermission putProviderProperty.BC" is thrown. if I use a policy file, it works fine but for a beginner user is not very useful intall a new policy file.
After this I tried to write a new self-signed applet that read a file and open a ServerSocket on port 21, and it work fine without a new policy file!
My question is this: why is needed a policy file to add a provider and not to open a ServerSoket or read/write a file???????
PS
if u have an idea to resolve my problem without a policy file, tell me pls!!! IT'S URGENT!!

An applet works out of a so-called sandbox. The security restrictions can be overcome in one of two ways that you have tried:
1) by the use of a policy file, or
2) by signing the applet
So, to answer your question:
My question is this: why is needed a policy file to add a provider and not to open a ServerSoket or read/write a file???????Since the applet is signed, there is no need for a policy file......if you tried to access the socket without signing the applet, you'll get the security exception!
;o)
V.V.

A somewhat simple security question......

If a mac running macosx has two separate user accounts, lets say one admin and the other a standard user, or both admins or both standard users.....
Is it possible for a hacked/penetrated account on one of the users to affect or read any info from the other user on the same machine ?
What application is in question; Safari lets say.....

FLUIDNYC wrote:
So, disable all scripts and uninstall all plugins from the browser.
No java, No javascript, No plugins like flash, java, shockwave, quicktime, or adobe crap.
So, no functionality. What about that java applet I need to run 10 hours a day. Do you think I should go out of business over it? Or all my QT movies? Or, deprive myself of Flash, so I can't view the content of websites?
So, lets say you browse www.thissiteisinfected.com and have everything uninstalled (see above), and your smart enough to browse the web using a "STANDARD" user account and not the "ADMIN" user account.
Running from a standard user buys you nothing and adds additional steps. If you want to download an app, before you install, you will get a dialog warn you "XXXX is an application you downloaded from the internet..." So, you still have to authenticate. And what about *all the apps that need no authentication to install?*
You tell me how this website will inject crap into your MAC with the settings above???
There is no way to FORCE CODE into your browser if everything is disabled.
Tell me how it can "inject crap" into my "Mac" admin without my complicity.
I have bumped into a rouge antivirus website while on my macbook using safari.
All of a sudden a popup stated i had spyware, i could'nt close the box/window, I had to do a FORCE QUIT on SAFARI to get out of that page. It pretty much hijacked SAFARI.
This is nothing that can harm you. It is annoying having to force quit over it, but that is all.
My safari download settings place things on my desktop, sure enuff, there was a .EXE file sitting on my macbooks desktop.
Sure enough, your Mac can't do a thing with it.
NOTHING IS BULLETPROOF.
I agree but there are simpler ways to plant a rootkit you overlook, that have nothing to do admin accounts or ports. *The question is, who would want to?* Even if a black hat is randomly hunting for bank account numbers, social security numbers, credit card numbers, etc. he would pass up a UNIX based system with good protections in place for an easier target.
In short, in a home environment, I could never recommend running from a standard user. Especially if they are on a router and/or using OS X firewall. (The exception being if you have kids and want to use parental controls.) I have no idea how this mantra about using a non-admin account started, there is no place where Apple recommends this.
-mj

Simple Query Question - How do I return the Last 3 records of a Table?

Question.
For example, I have a table that has 50 records.
How do I, specify in SQL to only return the last 3 records of the table.
Select a.* from table a where ????

I was just trying to show an example to a friend on
how something like this would work and if it was even possible. But it won't work. Here's a simple example:
SQL> create table emp
2 (id)
3 as
4 select object_id
5 from   all_objects
6 order by object_id;
Table created.
SQL> select *
2 from (select rownum rn
3               ,b.*
4         from   emp b)
5 where rn > ( select (max(rownum) - 3)
6                from    emp)
7 ;
        RN         ID
     40830      55891
     40831      55892
     40832      55893So far, so good. These are the "last 3" rows inserted. Now delete a bunch of rows and insert 3 new ones:
SQL> delete emp where id < 40000;
33423 rows deleted.
SQL> commit;
Commit complete.
SQL> insert into emp values (60000);
1 row created.
SQL> insert into emp values (60001);
1 row created.
SQL> insert into emp values (60002);
1 row created.
SQL> commit;
Commit complete.
SQL> select *
2 from (select rownum rn
3               ,b.*
4         from   emp b)
5 where rn > ( select (max(rownum) - 3)
6                from    emp)
7 ;
        RN         ID
      7410      55891
      7411      55892
      7412      55893Here's the problem. Even though the "last 3 rows" are 60000 - 60002, I still get the same ones as the first query.

Automation Question: How do I work with an open 'upload file' dialog?

Preamble:
Was a very experienced VBS automation guy, this is my first emersion into the wonderful world of C# automation. Using Selenium WebDiver, I have successfully logged into a web page, filled out a few web forms, clicked on the 'add image' button and am
now faced with an open 'upload file' dialog. Pretty sure the namespace I need is system.windows.forms.OpenFileDialog so added the reference to my project.
Question:
All the examples on the web seem to relate to app development and not test automation. But, I need to automate this web application and all that's left is the image upload. What do I do when faced with an
already opened 'upload file' dialog? I know the image and path, how do I automate the process of placing the full path into the dialog and clicking the OK button or alternately, enter key?
Thank you!

I doubt that you need System.Windows.Forms.OpenFileDialog, the browser isn't written using WinForms and that dialog is a Win32 native dialog.
Maybe you should post this in the Selenium Users
group? It has little to do with C#, it's more about how Selenium interacts with the browser.

Simple Automation question

Similar Messages

Maybe you are looking for