Simple backup of TC data to an external HD

Hello --
I'm trying to do a straight backup of my 2TB Time Capsule (with three Macs' worth of Time Machine data) to my external 2TB hard drive.  I've done this once before but I sure can't figure out how I did it.  I only use my HD as an offsite TC backup, not as a regular appendage to my TM setup.
Thanks much for your help!
-s

The Archive function in AirPort Utility will make a complete copy of the contents of the Time Capsule drive to an attached USB hard drive.....so that might be what you were thinking of.
Otherwise, you can use a third party commerical application like SuperDuper or Carbon Copy Cloner to copy the contents of the Time Capsule drive to a USB drive attached to the Time Capsule.

Similar Messages

  • I'm having some difficulty with Time Machine.  It appears to be deleting backups from random dates on my external hard drive.  I am not deleting them.  Are they hidden and how do I prevent this from happening?  Can I retrieve them?

    I'm having some difficulty with Time Machine.  It appears to be deleting backups from random dates on my external hard drive.  I am not deleting them.  Are they hidden and how do I prevent this from happening?  Can I retrieve them?

    ... I didn't know that Time Machine was more a last resort back up instead of main back up.
    Don't rely upon Time Machine to the exclusion of all else. I compliment Time Machine with a periodic "clone". TM is much better than nothing, but it's a safety net, not a hammock
    Here is my understanding of Time Machine's file deletion algorithm, distilled from Pondini's FAQ, Apple's KB articles, and my own observations.
    Time Machine deletes ("thins") files from the backup disk as follows:
    Hourly backups over 24 hours old, except the first backup of the day
    Daily backups over 30 days old, except the first backup of the week
    Older backups get deleted when Time Machine requires space and you deleted them from the source disk.
    Therefore, assuming TM has been performing at least one backup per day, backup files will remain available:
    at least thirty days, if they existed on your Mac for at least a day
    until you run out of space, if they existed on your Mac for at least a week
    In addition to the above, Time Machine always keeps one complete copy of your source disk so that the entire volume could be restored if necessary. Any files that remain on your source volume will be present on the TM backup, no matter how old they are.
    If you are using 250 GB of space on your source disk, its Time Machine backups are likely to require at least twice that much. A good estimate of the minimum required backup volume size would be about three times the size of your source disk - 1.5 TB in your case.
    A more thorough explanation would require Pondini since he has plumbed Time Machine's mysteries far more than I have.
    http://support.apple.com/kb/HT1427

  • Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

    can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

    Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
    btw - what are the symptoms of your failing drive?
    -mj
    Message was edited by: macjack

  • How can get back my backup data from an external element ?

    How can get back my backup data from an external element ?

    See the section titled "restoring data from Time Machine backups" in this Apple support article; that should get you going.
    http://support.apple.com/kb/ht1427
    Regards.

  • How can I remove all Time Machine data from an external HD, while retaining the other folders/files on the disk?

    I recently replaced my old Macbook Pro with a new Macbook Pro Retina.
    The original MBP had Time Machine set up on an external HD, and I also had some manually saved/backed up files (stuff that didn't need incremental backups; very old stuff) on the disk as well, in folders.  This worked fine and well for the life of the original MBP.
    When I set up the MBPr, I did not elect to transfer everything over from a Time Machine disk, as I wanted a Fresh Install; I chose to just re-download/install the apps  I needed from the App Store.  Much cleaner, more stable.  I updated to Yosemite immediately so, it gave me more of a  clean install.
    The problem is, Time Machine now won't read any Time Machine backups from that disk.  Migration assistant can pull data from it, but it's a bit wonky.  It was easier to just manually copy over what I needed.
    Now, I just want to "reset", and completely remove the old Time Machine data from the external hard drive, since it is completely useless to me now (I can't access it on this computer, and it's taking up space).  I want to remove the Time Machine data, as if it were never there, but keep my other folders/files that are on the disk (so, a format is not feasible).
    I will then set the disk up as a new, fresh Time Machine disk for the new MBPr. 
    What is the proper method for removing Time Machine data from an external disk (which doesn't seem to be associated with this machine anyway)?  I know a simple rm -rf will cause problems.
    Thanks for any help provided.

    See the yellow box in #12 of Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

  • Boot with Startup CD plus simple backup?

    Is it possible to reboot to a formatted iMac with just the original 10.6 startup
    cd plus a simple backup (SilverKeeper) of library, system, applications and users?  Now using 10.6.8.

    Gordon McGilvray wrote:
    Is it possible to reboot to a formatted iMac with just the original 10.6 startup
    cd...
    Yes you hold c and it boots off the installer disk that came with your comptuer or the OS X version you upgraded with.
    You can also install OS X onto a external drive provided it's formatted HFS+Journaled in Disk Utility.
    Gordon McGilvray wrote:
     ....plus a simple backup (SilverKeeper) of library, system, applications and users?  Now using 10.6.8.
    Ok, you don't need to boot from the installer disk, all it does is install OS X and perform some disk repairs and reformatting. You go this route if you have to rebuild OS X completely, or reinstall it over the previous OS X to solve issues. Are you having a issue of some sort?
    We could use some more information why,
    What you seem to want to do is CLONE your boot drive to a Disk Utility > HFS+ journaled formatted (self powered) external drive.
    You can do this with the  free (donations accepted) Carbon Copy Cloner, which clones and makes the external drive "bootable"
    When your done cloning, the external clone is hold option bootable which you select the external clone to boot from.
    CCC only does OS X, no bootcamp or filevaulted drives.
    Once you have a clone, it can be updated much faster for small changes, the first clone takes longer as everything is copied.
    Only use one drive for a clone, it's a good idea to have two drives with two clones rotated every couple of weeks, updated daily with the auto-updte feature.
    This way if somethng goes bad, at least you can go back a week or two and recover by option booting off the older clone.
    More hardware redundancy also protects your data from hardware failure. Store a clone off site for any potential fire, theft etc.

  • How do I backup my iPhoto Library to an external hard drive and keep my photos grouped by their events?

    How can I backup my iPhoto Library to an external hard drive and keep my photos grouped by their events?

    I have attempted to make sure my iPhoto library has been backed up on the external hard drive and that it is safe to delete some events from my internal hard drive
    You need to think this through.
    Time Machine is a back up application. It keeps a rolling back up of the data. It's called rolling because it means you can revert to the data you had on a specific date and time. But that's not eternal, and as time goes by, and your drive fills up, older backups are deleted. So if you delete Events on your Mac they will - eventually - also be deleted from the Time Machine back up.
    If you wan tot archive data hendon't use Time Machine for that job. Here's how you might archive an iPhoto Library:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    Now you have two full versions of the Library.
    3. On the Internal library, trash the Events you don't want there
    Now you have a full copy of the Library on the External and a smaller subset on the Internal
    Some Notes:
    As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
    You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    You can keep the Library on the external updated with new imports using iPhoto Library Manager

  • Can I restore settings, apps and data from an external hard drive to new Macbook Pro?

    I recently lost my Macbook Pro to water damage.  It was about 3 years old and tuned for comfort.  Unfortunately, my most recent backup is at least 3 months old.  I purchased a new MacBook Pro and I'm wondering what my options are for migrating my settings, apps and data from the old hard drive to the new MacBook Pro?  I have a USB drive bay that I plan to attach to the new MBP to gain access to the old hard drive.  Someone suggested Migration Assistant but my research hasn't turned up any information about migrating data from an external drive.
    Any help would be greatly appreciated.

    THANKS!  I guess my research wasn't THAT thorough.   I booted with the external drive attached and setup immediately gave me the option to setup using Migration Assistant.  It was a little slow via USB (2+ hours) but it was nothing compared to the time it would have taken to do it manually.  My new 15" MBP looks exactly like my old 13" MBP.  AWESOME!!!
    Thanks again!

  • I cannot transfer data from my external hard drive to my new mac

    I had to get a new hard drive put into my macbook pro because it was failing. So, I moved all my data onto an external hard drive so I would not lose anything. But now I cannot get iphoto or imovie back onto my computer. It says I cannot open it because it is a time machine back up. I don't want to have to purchase iPhoto and iMovie again just because I had to replace my hard drive.

    Copying the files directly from a Time Machine backup may be possible but I don't recommend it. Your new hard disk is essentially a new computer to Time Machine, and it will have problems understanding where to put the individual files. What you're trying to do is just not the right way to go about it.
    To restore from a Time Machine backup, boot Lion Recovery and select "Restore from Time Machine backup".
    See Pondini's explanation here: http://pondini.org/TM/14.html

  • Moving data from one external hard drive to another ERROR-36

    i got a new hp simplesave external hard drive, and i'm moving all my files from an older external hard drive (can't find brand name). Some of the files are bringing up error 36 which is something along the lines of can't read/write file. which is causing the file transfer to stop on that one file. there are a lot of damaged files so the file transferring is going very slowly. is there a way i can find out which files are bad ahead of time so i can get rid of them AND THEN transfer the files?

    Well, since the MacBook with Tiger still has issues with the drive, I think it is some kind of hardware problem related to the external drive. I have numerous USB and FireWire drives connected (probably too many), and I've had no issues with Snow Leopard. Snow Leopard makes my older Intel iMac run better than when it was new.
    Make sure you try connecting the drive to a separate power outlet, if it is connected to a power strip. It is also possible the drive's power supply is failing; that can cause the the improper disconnect message to come up, because the drive inside is not getting sufficient power. That is why you need to try the hard drive in a different case, or using the USB adapter, to eliminate possibilities.
    Also, I still don't know if this drive is USB or FireWire, but be sure to try it with no other devices connected, in case there is some interference between devices.
    One more thing you can try to rule out a problem with your currently installed system. Start up using the Snow Leopard installation disc; insert disc and restart with the C key held down. When you get to Installer's first screen, go up to the menu bar and, under Utilities, select to run Disk Utility.
    At this point, you can just leave the iMac alone for a while to see if the drive gets ejected. If it does not, try making a Disk Image of the external drive and saving the image file to the iMac's internal drive. If that works, there may be some issue with your current installation (and you have a backup of the data). If it fails, then I think you have confirmed that the problem is with the external drive, not the iMac or Snow Leopard.

  • Cant write/edit data on my external hard disk! Help please!~~

    Okay guys, currently, i'm using Tiger version 10.4.11. My problem is that i cant edit data or write data to any external hard disks, like the maxtor One Touch and so on. Only thing i can do is to extract the data from the disks. I have tried to write on multiple hard disks but in all my attempts i have failed. i've tried to edit my network settings, but no results.
    So, i seek help from anyone out here!

    Hello, yea.. thanks man =)
    Basically, its a shared hard disk between my macbook and a windows PC. So i kinda use the PC to write all my backups and data on the hard disk.
    I have quite a few hard disk and they all have the same issue. It says 'The item 'file x'cannot be moved because 'my hard disk' cannot be modified.'I've used the software provided from the hard disk manufacturer, Maxtor/Seagate, to reformat the brand new portable hard disk which i bought yesterday.
    Its connected via USB, same as all the other ones i have.
    eh. the get info for it says
    Kind: Volume
    Created: --
    Modified: Thursday, 23 Aprl 2009 3:24AM
    Format: Windows NT Filesystem
    Capacity: 232.88 GB
    Available: 232.57 GB
    Ownerships & Permissions: You can only read.
    erm... its a portable drive which i carry around, so i guess its not a network drive? and how doi determine the network settings? Sorry man.. not really good at these =x

  • I have an Apple Macbook and will be backing up the entire system to an external hard drive utilizing the Time Machine application. when I am doing this, will the data on the external drive that I am using be erased?

    I have an Apple Macbook and will be backing up the entire system in order to upgrade to a newer OS. I will be using an external hard drive to do this and there is already data on it. To complete the backup, i will be using the Time Machine application. Does this application wipe out all of the existing data on the external hard drive, or will it create a new "folder" for the backup?
    thank you

    No, but as steve359 states you should use a dedicated hard drive for backups. It you need a temporary backup then you can use the drive provided it has sufficient space for all your data on the hard drive.
    When Time Machine finds that the drive has data on it already it may decide to erase the drive before continuing, which is another reason to use a dedicated drive.

  • Is it possible to sync time capsule data to a external hard drive

    Is it possible to sync time capsule data to a external hard drive connected to time capsule via usb. (as an precaution just incase time capsule fails)
    Thanks

    Yes, if the USB drive has been previously formatted correctly in Mac OS Extended (Journaled) format.
    Open AirPort Utility - Click Manual Setup
    Click the Disks icon
    Click the Disks tab below the icon
    Click Archive
    Allow plenty of time for the copy process to occur. You will not be able to make Time Machine backups from your Mac until the Archive process has completed.

  • Time Machine Backups.backupdb with "Lacie Rugged 500GB External Hard Drive"

    So I bought a Macbook Pro Yesterday. I have a black Macbook from a few years ago and wanted to transfer my Hard Drive onto the new Macbook Pro. I have an external hard drive called "Lacie", made by rugged/neil poulton with 500GB of space. So yesterday I plugged it into my old Macbook and used time machine to store all of my data on the external hard drive. After it was done I plugged the external hard drive into my new Macbook. I ran Time machine and it took about an hour. Then I clicked on my "LACIE" hard drive icon on my desktop, and dragged the folder "Backups.backupdb" into my Hard Drive on my new laptop. Then a Copy window popped up and said "preparing to copy to Macintosh HD". After about 5-10 minutes the Copy Window displayed "Copying 489,020 items to Macintosh HD, Zero KB of 206.96 GB- Estimating time remaining..." I've left this window open for the past 2-3 hours and nothing has happened. It's still remaining at "Zero KB of 206.96 GB-Estimating time remaining...". Does anyone know how I can fix this problem? Did I skip a step? I feel like after 3 hours it would have at least transferred something or changed somehow. Should I rerun Time Machine?
    Thanks a lot.
    -Luke

    jpdemers wrote:
    Copying a Time Machine archive from one hard drive to another is a very slow process, especially over a USB connection.  You're talking about almost half a million separate files, and the drive not only has to write them all, it has to create a directory that lists and locates all of them.  I'm not sure why the Finder's "Copy" window sticks at zero KB., but if you're patient (we're  talking 15 hours or thereabouts, depending on the performance of the drive), it will all get transferred eventually.  You can see the dated folders popping up on the target disk, if you check on it from time to time.
    I've done it for archiving purposes, prior to getting Firewire drives, but this is entirely the wrong way to transfer files to a new system.  (For one thing, you're copying thousands of system files that aren't relevant to the new Mac, and thousands more that already exist.)  Why do things the hard way, or the wrong way, when Setup Assistant was created for this specific task?
    Amen.

  • How do I transfer data from an external drive?

    I have a mac mini and i want to transfer some, but not all data from it to my new macbook air. The person at the Apple Store told me i could use my external drive to do this by connecting it to my macbook air. I'm a bit confused on how to get this done. Also, when i transfer the data, do i open and drag and drop into the applications, i.e. iPhoto, Numbers, etc., or onto the hard drive?

    I have used the external for backup for the mac mini. It already has all of the data on it.
    I am trying to take data from the external and put it on my macbook air.
    This is what the guy at the Apple Store told me to do. He said I could just drag and drop any of the data in this manner. I'm confused by your reply. Do I just not understand your explaination?

Maybe you are looking for