Simple beginner's question: What's the quickest way to export a single clip?

I've started using Premier Elements because this was taking too long on my previous editor.
I'm a piano teacher who uses video as one of the aids for my pupils, and I often record a whole book in one sitting, announcing the titles of the pieces as I go, then clipping my announcmeents (and false starts, swearing, etc) when editing, and adding text titles instead. These are then uploaded to pupils'own poages on my teaching website.
However, many of my pupils want to work from single clips.
My previous method was to keep deleting everything from the project except the clip I want, processing that, then opening the project again withut saving. This seems to me a complete waste of my time if I can export one clip at a time.
I've only been using Premier Elements one day, so maybe there's something obvius I've missed! Someone, please tell me there's a quicker way than what I'm doing! There might be up to 40 clips in one video

Thanks, Bill! Actually version 9 looks a little clearer than that, as it has two bold clear white paddles to mark the edge of the work area.
I was a little frustrated at first, because whatever I did, it still took a year and exported the entire video.
Then:
I caught sight of this teeny tiny box waiting for a tick from me, which said:
Share Work area Bar Only
We have lift-off 
Thanks again. So much quicker than all that deleting ahnd hoping you don't accidentally say "yes" when prompted to save changes!

Similar Messages

  • What's the simplest way to export a single frame from an animated gif as gif?

    i have an animated gif and wish to save a single frame as a non-animated gif.
    in the past i've been achieving this by deleting all the frames i don't wish to export and deleting them before exerting, this seems very clumsy though so i figure there's a more sensible solution in there somewhere, but where?

    Thanks, Bill! Actually version 9 looks a little clearer than that, as it has two bold clear white paddles to mark the edge of the work area.
    I was a little frustrated at first, because whatever I did, it still took a year and exported the entire video.
    Then:
    I caught sight of this teeny tiny box waiting for a tick from me, which said:
    Share Work area Bar Only
    We have lift-off 
    Thanks again. So much quicker than all that deleting ahnd hoping you don't accidentally say "yes" when prompted to save changes!

  • What's the quickest way to reset my security questions because I don't remember my answers

    What's the quickest way to reset my security questions because I don't remember my answers

    http://lmgtfy.com/?q=How+to+reset+apple+security+questions

  • What's the quickest way to put edit points around a selection?

    In the timeline (TL) I have made a selection inside a clip (using the Range Selection tool):
    What is the quickest way to make this selection a separate clip (as below)?:
    PS Saying 'put edit points around' and 'make separate clip', I guess are always the same thing, so I have mixed my terms!?
    PS I have currently been using: CMD + X, CMD + V, but this is a hack, not a method, so there has to be a way, right?

    Thanks to you all for quick replies, especially Andy for quickly understanding me.
    Yup, I used the Range Selection tool. It's a great tool, when for e.g. you want to lift ambient room tone from a portion of an audio clip to paste elsewhere.
    Anyway, I am just experimenting thoroughly with all the tools and workflows, to find quickest ways of doing things. To answer your question(s): an example in which you would want to do what I mention above is if you wanted to quickly apply particular Effects/Parameters/Settings to a portion of a clip, like a sepia tint, and wanted to be able to easily click back to that portion later,  see e.g. below:
    Thanks again

  • What is the quickest way to access the Settings on an iPad?

    What is the quickest way to access the Settings on an iPad? (I mean, the usual cogwheel "app" called Settings)
    In particular, I'm looking for a quicker way (or a more convenient one) to access it from an open application, than hitting the "home" button, possibly swiping the home pages, and tapping on it.
    (I know, I know, I already placed it in the bottom bar, so I have it available from all pages...)
    It would be great if I could cut another step or two. I mean, there are situations where I need to use the Settings app repeatedly. I wonder why it was not included in the iOS 7 swipe-from-bottom menu, while the "Camera" or "Countdown Timer / Clock" made the cut.
    I know everybody will have a different opinion on what should be included in that menu, and choices have to be made, but still...
    for example, on my Android smartphone the newer OS updates placed a shortcut to the settings app in the upper-right corner of the swipe-down menu, which is like the most prominent place you could place it in.
    Anyway, do you know of one or more alternative ways to access the Settings app?
    (Oh, and yeah, it just occurred to me that I can four-finger swipe it, if I have accessed it recently, but again if I access another app or two in between it will become at least as cumbersome as going through the home page).

    Anyway, do you know of one or more alternative ways to access the Settings app?
    Short answer, no. If you have a suggestion for future iOS functionality, use the feedback functionality found elsewhere on this site.
    Barry

  • HT1349 what is the quickest way to move all my iTunes music, video, etc. to a new computer? any help would be appreciated.  thanks.  p.s. i purchased a belkin transfer cable - will that work?

    hi - i'm a newbie - what is the quickest way to move all my iTunes music, video, etc. to a new computer? any help would be appreciated.  thanks.
    p.s. i purchased a belkin transfer cable - will that work?  i have an iPod Touch.

    You copy it from one computer to the other.
    Type "move itunes library" into the google search bar.
    You have posted in the iphone forum.

  • What is the quickest way of moving a itunes music library from a windows 7 machine to an apple Macbook pro?

    What is the quickest way of moving an itunes music library from a windows 7 machine to an apple Macbook pro?

    If you wany Everything from your PC itunes on your MBP... Then... See Here...
    Move iTunes Library from PC to MAC
    http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

  • What's the quickest way to open Access Connections?

    What's the quickest way to open Access Connections, apart from its Taskbar level meter?
    I prefer to use the Power Manager battery meter instead, as it looks pretty ugly when both are used, and they take up too much space.
    Fn+F5 no longer gives any access to Access Connections either.  And it is not integrated into the standard Windows network system tray icon's right-click menu, like Power Manager is with the standard power system tray icon.
    You cannot even type Access Connections in the Start Menu search box, as the shortcut is called something else, which I can never remember.
    Ideally, I would at least like to be able to access it though the Fn+F5 box again (I'm pretty sure it was possible in versions).
    jason404 - X220 (my sixth ThinkPad)

    If you are still interested in using a translator, I recommend the [https://addons.mozilla.org/en-US/firefox/addon/gtranslator/?src=userprofile gTranslator] add-on.<br>
    This add-on is similar to the Google Chrome translation bar.

  • What is the quickest way to incorporate a new template's styles into an existing template?

    Recently my company have developed a new template. I am creating a document using much content which already exists in an older template with different paragraph styles, table formats and page formats. What is the quickest way to incorporate the new styles so I don't have to individually update the table contents. The paragraph catelog and tables have different titles in the two documents.
    Thanks,
    Niall.

    Do you know where I can find a copy of Template Mapper? I went to http://ig5authoringtools.com/plugin-directory/single-sourcing/templatemapper/ and it is not there.
    Thanks in advance

  • I have a 4 month long text message thread conversation. What's the quickest way to get to the very beginning of the conversation?

    I have a 4 month long text message thread conversation. What's the quickest way to get to the very beginning of the conversation?

    The startup.exe file is locate in the \NI-RT\STARTUP directory. 'cd NI-RT' then 'cd STARTUP' should get you to the right place after making the connection with ftp. I don't recognize PH_EXEC.EXE. Logging in as anonymous is fine. I don't recall seeing documentation on the file structure and locations on the module but I'm sure there is some. I just wandered around w/ftp.
    The program to update the node should be below. Enter the IP address, the green light will confirm the node is found.
    The version function scans the existing startup.exe for a string beginning and ending with " RU Version " and prints everything in between as the version.
    The autostart function will copy the existing ni-rt.ini file to your computer, mod
    ify the autostart as requested, then put the file back. Leaves the copy on the PC, which can be handy.
    Send file will request a file of the format startup*.dat which will be renamed startup.exe and ftp'd to the module. Lets you keep version numbers in the filename on the PC side. Your directory structure probably won't match mine so you'll have to browse for your file.
    Reboot module reboots the module.
    Hope this is useful, let me know if anything doesn't make sense. Thanks.
    Matt
    Attachments:
    RNconfig.exe ‏855 KB

  • What's the quickest way to slice up this image...

    I found this image and would like to slice it up into separate images. What's the quickest way to do this without having to manally select each one or manually draw slice lines?
    My idea was to get them all surrounded by a marquee or path, and then somehow export that marquee or path area into a file.
    The first part of creating the marquee and path was easy...
    I first surround the entire image with a black border so that it intersects the horizontal black divider lines
    I then used the magic want tool to select the black border which also selected the black divider lines
    I next inverted the selection... so now all the sections are selected perfectly
    Finally I right-clicked on the selection and picked "Make Work Path"
    But now how do I export all the work path sections into individual files?
    I would appreciate any help or advice... thanks.
    -Pete

    I was able to do it with a selection I saved named selection for a single frame. Then recording an action that I played moved the selection and played again repeated this till all frames were created. I then deleted the background layer aligned all layer to the top and created a frame animation.
    The script export layer to files will create files for each frame.

  • HT1417 What's the quickest way to delete duplicates without going song by song?

    What is the quickest way to delete duplicates from i tunes library without going song by song?  I just transferred my music from my ipod classic to my computer and now I have a lot of duplicate music.  Most is from CD's I reburned or music I was able to get back on my new computer through I tunes.  It is from my personal i pod (one of 4).  I finally figured out how to get it off the ipod and back onto my newer computer. I made sure to go to advanced setting and check "keep i tunes folder organized" but it still saved all duplicates.

    Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • What is the quickest way to query the init.ora?

    What is the quickest way to query the init.ora?

    Use SHOW PARAMETER at the sql plus prompt.
    SQL> show parameter undo
    NAME                                 TYPE        VALUE
    undo_management                      string      AUTO
    undo_retention                       integer     7200
    undo_suppress_errors                 boolean     FALSE
    undo_tablespace                      string      rollback01
    SQL>

  • What is the 'quickest' way to read char data from a txt file

    Hello,
    What is the 'quickest' way to read character data from a txt file stored on the phone to be displayed into the screen?
    Regards

    To be even a bit more constructive...
    Since J2me does not have a BufferedInputStream, it will help to implement it yourself. It's much faster since you read large blocks at ones in stread of seperate chars.
    something line this lets you read lines very fast:
      while ( bytesread < filesize ) {
             length = configfile.read( buff, 0, buff.length );
             // append buffer to temp String
             if ( length < buff.length ) {
                byte[]  buf  = new byte[length];
                System.arraycopy( buff, 0, buf, 0, length );
                tmp.append( new String( buf ) );
             } else {
                tmp.append( new String( buff ) );
             // look in tmp string for \r\n
             idx1 = tmp.toString().indexOf( "\r\n" );
             while ( idx1 >= 0 ) {
                //if found, split into line and rest of tmp
                line = tmp.toString().substring( 0, idx1 );
             /// ... do with it whatever you want ... ////
                tmp = new StringBuffer( tmp.toString().substring( idx1 + 2 ) );
                idx1 = tmp.toString().indexOf( "\r\n" );
             bytesread += length;
          }

  • What is the quickest way to delete thousands of emails?

    What is the quickest way to delete thousands of emails?

    If you are using Apple Mail, you should be able to select a whole bunch of them at once and delete them (there are two commands for this under the Edit menu, Select All and Delete), then empty the Mail trash.
    If you are reading an email account through a web browser, they should provide a way to select multiple files. Usually it is a checkbox at the top of a column that selects the entire column when checked. If they let you increase the number of messages visible at once, you can select more at a time.

Maybe you are looking for