Simple but complete PI/XI scenario
Hello,
I have just started learning about PI/XI. Now I have access to a PI 7.1 system and would like to start "learning by doing" instead of just reading about stuff.
I would like to start with something simple like a file to mail scenario where I am just collecting a file via FTP and then forward it to an email address.
Unfortunatelly I couldn't find a tutorial that covers every neccessary step involved in that scenario. If someone here has such an article and could provide a link to me, that would be great. Other hints are welcome too.
Hi Peter,
Welcome to the PI world...
Learning by doing is the best way to learn PI. I dont think there are any step by step explanation for any scenario in PI7.1. ( for PI 7.0 and XI 3.0 , you have plenty )
Check of the following blogs of the scenario links :
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
Check the following document for the Terminology changed between old versions and PI7.1
https://bond.newellco.com/saphelp_nwpi71/helpdata/en/6d/177ed657e248d78e8add48d2ecc135/,DanaInfo=help.sap.com+frameset.htm
Also, if you stuck anywhere, then, we all are here to help you.
Best of Luck.
Thanks,
Pooja Pandey
Similar Messages
-
Want a simple but complete example of JavaFX.
Hey, I want a complete but very simple example written in JFX. If it is written in step-by-step way then it will be better. (Without NetBeans will be preferred). Thanx in advance. Any suggestion will be welcomed. New to JFX.
println("Hello World!");or
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.text.Text;
import javafx.scene.text.Font;
Stage {
title: "My App"
width: 250
height: 80
scene: Scene {
content: Text {
x: 10, y: 30
font : Font { size : 24 }
content: "Hello World!"
} -
How do I save to mixdown in mono, 0 db reduction in volume, (Same volume level as in the files-no -3db reduction) in 64 bps mp3? Sounds simple, but none of the support staff has been able to do it.
Several solutions to this problem. I believe we may have discussed this over the support e-mail, but I'll share it again here so that it can help others as well.
First, as I discussed in the e-mail, Audition defaults to support Pan Law which prevents content mixed to the center of a Stereo field from being louder than the same content panned far left or right. This provides a -3dB drop to center content by default, but you can disable this completely by entering Preferences > Multitrack and setting the Default Panning Mode to Left/Right Cut (Logarithmic)
Now, when you create a new Multitrack session, there is an option to specify the Master channelization. Here, you can select Mono, Stereo, or 5.1 and this will be the default channelization mode for a basic mixdown operation regardless of your clip content, though can be overridden when exporting a session mixdown.
Next, if you just choose the menu item Multitrack > Mixdown Session to New File... it will always default to the Master channelization. This command does not write to disk, it is a preview or pre-processing step. If you wish to export your multitrack session mixdown directly to disk, in your desired channelization and file format, please use the command File > Export > Multitrack Mixdown > Entire Session... You will then have the complete set of output options, including the option to output at any channelization you like and the format you prefer.
Here, I've disabled the default 5.1 output and selected a Mono mixdown instead.
I've now changed the file format settings as well to MP3, 64K.
With most of these configuration details, you should only need to set them once and these will remain the defaults for any subsequent projects, unless modified again. The Export Multitrack Mixdown dialog will reset the Mixdown options to match the default output, and the MP3 settings may update to reflect the kBps setting nearest your session sample rate. -
Help with simple file to file BPM scenario
Hi Gurus,
I am doing simple file to file BPM scenario.
I am getting an error in SXI_CACHE with status code 99.
I activated the business process then status code changed to 2.
When i tried to activate the process again i am getting prompted to enter access key details.
Is there any other way to get rid of the error i.e., to get the status code to zero with giving access key details.Sample access key details are also greatly appreciated.Hi Bhavesh,
I tried doing that but of no use.
I registered at https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm
and got a mail with details.I was actually looking for access key details in the mail from sap.The details in the mail contains License key but not access key .Are the both access key and license key same? -
why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT -
Simple but reliable small office setup
Hi group,
I need some advice on setting up a simple but reliable small office wireless network. Up until now, we had a consumer AP combined with wired connections. However, we're moving to a new office where it's difficult to implement a wired network and we decided to implement a good quality wireless network.
So, I was looking into business quality wireless AP's and it looks as if the Aironet 1600 is an interesting option. However, I'm not a (wireless) network specialist and have no knowledge of controlled AP's.
The office is (only) 278 square meters (24 x 11.6), divided in two main areas by a supporting wall with two large doorways. I would like to keep the setup costs to a minimum, ideally using only 1 AP. This might mean placing the AP on the ceiling near the dividing wall (which is roughly in the middle), or on the wall itself.
We need to support fast wireless connections from 15 laptop computers now, and up to 25 in the near future. Also, we'd like to support 15-25 mobile devices, i.e. tablets or smart phones.
I've found some info on the differences between the AIR-CAP1602 and AIR-SAP1602 models, as well as the Internal and External antenna versions. It seems to me we could use the Standalone (SAP1602) model. However, I don't have enough knowledge to determine if the Aironet 1600 is actually appropriate for our requirements and if yes, which model.
I would very much appreciate your advice!A 1600 would work or even a 2600. I prefer the 2600/3600 though but cost is your concern. I would also place the AP on the ceiling but belies the ceiling maybe in the middle if possible. Don't place the AP above the ceiling because you will loose coverage. Internal antennas are fine and just to note, rule of thumb is 25 users per AP so just in case you need more throughput, maybe using two separated by 3-5 meters would help also. If the 1600's are the choice for you then look at having one or two APs.
Sent from Cisco Technical Support iPhone App -
My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphone without loss my date?
Thankslbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken! -
After downloading a pdf from a website, how can I view the file in Safari 6.0.4 (just as I can in Safari 5.0.6)? I bet that it's simple, but I've missed something, somewhere, and a solution will be greatly appreciated.
Hello Kirk,
Thank's for your efforts, and I just wish that this was the solution. Unfortunately, it isn't because, after double-clicking on the pdf in the website, it simply "opens" in another Safari window as a black screen - the pdf is there, somewhere, but not visible (either as an icon, or as a document).
When I right-click in the black Safari window, where the file is supposed to be, the only option available to display the file is to "Open file in Internet Explorer" (which is not what I want to do). Other options include saving or printing the pdf, which I don't want until I've confirmed that it's the form that I want. The same options are offered if I right-click on the file icon in the website.
Any other suggestions, please? -
Since I got Fireworks 8 last week, I've worked through the
accompanying 'Getting Started' manual and much of 'Training from
the Source' by Patti Schulze. While I love the program, I'm
frustrated by a difficulty that may be simple but is exasperating
for me.
When I create an image and try to save it as a .gif, jpg or
png file for use in Dreamweaver,I find that I repeatedly time and
time and tiime and time without end, simply lose the image.
How can I resolve this difficulty?In FW 8, if you have a new image with multiple objects, you
can "save"
as PNG only, but you can "save as" any FW supported format,
without all
the html attributes associated with the Export dialog. With
many
formats, you will get the option to "save a copy" so you
don't flatten
your original artwork.
And of course, you can "Export" too.
That directory location issue is a pain. There is some kind
of logic
there, but I can never remember what it is. lol
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver
Anthony Bollinger wrote:
> Two ideas.
>
> First, exporting an image is not the same as saving an
image. You save the
> image to a PNG to preserve fireworks info, but you
export to a jpg or gif or
> other format (including "standard" png).
>
> Second, the program does not automatically export to the
directory your png
> or source file is in. This has tripped me up plenty
before. Be sure to
> check your path carefully. Anytime you experience
problems, drill down the
> path from the root of the drive.
>
> HTH -- Tony
>
> "kjpd84" <[email protected]> wrote in
message
> news:e961d8$r0s$[email protected]..
>>
>> Since I got Fireworks 8 last week, I've worked
through the accompanying
>> 'Getting Started' manual and much of 'Training from
the Source' by Patti
>> Schulze. While I love the program, I'm frustrated by
a difficulty that
>> may be
>> simple but is exasperating for me.
>>
>> When I create an image and try to save it as a .gif,
jpg or png file for
>> use
>> in Dreamweaver,I find that I repeatedly time and
time and tiime and time
>> without end, simply lose the image.
>>
>> How can I resolve this difficulty?
>>
>
> -
Extremely simple but baffling to me: Constructors.
I haven't a clue what they are. I've read about them online and in the Java API, and I still have no idea what they are.
My current understanding is this: a constructor is code dedicated towards defining how to treat a variable.
But...I have to write two programs using constructors and I have no idea what to put in them. And in fact everything I've tried gives compiler errors. I'm sure all of you know the quiet desperation and frustration I'm feeling.
Anyway, the assignments are:
1) Create a class called Employee that includes three pieces of information as instance variables - a first name (type String), a last name (type String) and a monthly salary (double). Your class should have a constructor that initializes the three instance variables. Provide a set and a get method for each instance variable. If the monthly salary is not positive, set it to 0.0.
Write a test application named EmployeeTest that demonstrates class Employee's capabilities. Create two Employee objects and display each object's yearly salary. Then give each Employee a 10% raise and display each Employee's yearly salary again.
2) Create a class called Date that includes three pieces of information as instance variables - a month (type int), a day (type int), and a year (type int). Your class should have a constructor that initializes the three instance variables and assumes that the values provided are correct. Provide a set and a get method for each instance variable. Provide a method displayDate that displays the month, day, and year separated by forward slashes.
Write a test application named DateTest that demonstrates class Date's capabilities.
It all seems extremely vague, to me.
For the first assignment I've got:
public class Employee
public String FirstName;
public String LastName;
public double Salary;
Which I think is right. But all attempts to create a constructor that have failed...I don't even know what one does. It seems kind of absurd for my first two labs to be so simple, basically logic exercises, and this to be so mind-destroying.
There's got to be an if/then to see if the salary inputted is negative, which is simple, no problem.
But the set and get methods...there's no data inputted into this program, so what the hell is it setting and getting, and how would the syntax work?
Like:
public void setFirstName( String FirstName )
FirstName = FirstName;
Doesn't work. And I think it's because it refers to itself for its own definition, which is nonsense. But I can't figure out what's right.
The second assignment is simpler, but it also makes no sense to me. The day, month, and year are not variables. And even if they are variables, the user doesn't input them only to have them displayed, right? So what is the assignment even asking for? This is all taken directly out of the book.
Any help is appreciated. =/FuneralParlor wrote:
I haven't a clue what they are. I've read about them online and in the Java API, and I still have no idea what they are.That's not a good sign.
My current understanding is this: a constructor is code dedicated towards defining how to treat a variable.No. They initialize an object.
When you buy a new XBox, you have to spend some time taking it out of the box, removing the packaging, and plugging the wires together. It's like that.
But...I have to write two programs using constructors and I have no idea what to put in them. You don't necessarily need to put anything in them. Does your class require initialization on the objects created for it?
And in fact everything I've tried gives compiler errors. I'm sure all of you know the quiet desperation and frustration I'm feeling.It sounds like you're trying random stuff, hoping something will work. Don't do that.
Anyway, the assignments are:...
>
It all seems extremely vague, to me.It doesn't give you the answers, but it tells you how to do them. It's pretty specific.
For the first assignment I've got:
public class Employee
public String FirstName;
public String LastName;
public double Salary;
Which I think is right.Well, generally fields shouldn't be public; they should be private. Also, you're not following Java naming conventions. Fields should start with a lower-case letter ("firstName" not "FirstName").
But all attempts to create a constructor that have failed...I don't even know what one does. It seems kind of absurd for my first two labs to be so simple, basically logic exercises, and this to be so mind-destroying.It's simple stuff. I find it hard to believe that you've read your textbook.
I'll give you a hint. The assignment says:
Your class should have a constructor that initializes the three instance variables. This means that the constructor will need to take arguments, so you can use the arguments's values to assign to the fields (instance variables).
But the set and get methods...there's no data inputted into this program, so what the hell is it setting and getting,The assignment tells you exactly what's going to be invoking the setter and getter methods:
Write a test application named EmployeeTest that demonstrates class Employee's capabilities. [etc]
and how would the syntax work?
Like:
public void setFirstName( String FirstName )
FirstName = FirstName;
Doesn't work. And I think it's because it refers to itself for its own definition, which is nonsense. But I can't figure out what's right.Right. In this case, the parameter name is obscuring the field name. This is where the "this" keyword comes in handy:
this.Firstname = Firstname;Your textbook and teacher should have mentioned this.
The second assignment is simpler, but it also makes no sense to me. The day, month, and year are not variables. What do you mean they're not variables? The assignment clearly says to make them so.
And even if they are variables, the user doesn't input them only to have them displayed, right? So what is the assignment even asking for? It's just a super-simplified example. You're right; it's worthless in terms of real-world practicality. It's just something pointless but simple for you to get practice with. Don't worry about it. -
I have problems with my macbook pro ... I recently bought "OS X Lion Mountain" but complete installation did not work ... purchases every time when I look biem appstore is still installed ... so now I have OS X version 10.8.3 ...
does it say not installed or does it say "download" in app store purchases?
if it say's download, then it's there for future use if you need to download it again.
see image below - i'm running Mountain Lion and it say's download in my App Store. -
Making a join seems simple but I can't get it to work
Hi All,
I have 2 tables LUGallery and LUSubGallery, the tables are related by the GalleyID field
LUGallery
Gallery ID
ClientID
GalleryName
5
50
Australia
8
50
Weddings
12
33
Portraits
4
33
Landscapes
LUSubGallery
SubGalleryID
GalleryID
GalleryName
67
5
NSW
68
5
QLD
69
8
Reception
70
8
Location
87
8
Ceromony
97
4
Rain Forest
What I am try to do seems simple but I can't get it to work the way I want it.
I am trying to write a query to display Galleries from the LUGallery tbl that have a Sub Gallery attached to them (ie. It's GalleryID appears in the LUSubGallery tbl)
So the query for the above example would list Australia, Weddings & Landscapes
I have tried to write code both with inner joins and nested queries but just can't get it right,
Any help would be greatly appreciated.
Thanks in advance
KrisI just want to
display the GalleryNames from the LUGallery tbl once
Then you probably do not want include all the extra columns from the LUSubGallery table.
It returns all of the records from both tables that Have
the same GalleryID
That is the way this type of JOIN works. It will return one record for each matched GalleryID. If you only want to display the unique gallery names you can either:
1) Use an EXISTS clause. It will return the distinct records from the main gallery table IF a matching record exists in the LUSubGallery table
--- Not tested ---
SELECT LUGallery.GalleryID,
LUGallery.GalleryName
FROM LUGallery
WHERE EXISTS (
SELECT *
FROM LUSubGallery
WHERE LUGallery.GalleryID = LUSubGallery.GalleryID
http://www.techonthenet.com/sql/exists.php
... OR ....
2) Use the DISTINCT operator to return only the unique combinations of the selected columns. Note: DISTINCT considers all columns in the SELECT list . So if you only want unique galleries, do not include the LUSubGallery columns in the SELECT list.
http://www.w3schools.com/SQl/sql_distinct.asp
Message was edited by: -==cfSearching==- -
I'm trying to send (email) photos from iPhoto. Computer says it doesn't recognize my user name or password. I've never had a problem emailing photos.....until now. Any suggestions? I'm sure it's simple but I don't know it!
CAN ANYONE HELP?? I ALSO NEED TO KNOW WHICH/WHAT TO PICK FOR MY MAIL CLIENT. I'VE TRIED THREE DIFFERENT THINGS AND NONE OF THEM WORK!Mail would be a good choice, unless you are using another email client, like Outlook. There is likely something wrong with the account setup in iPhoto. You may need to delete the account you set up and enter it again if you want to send with iPhoto instead of with Mail.
Give this a try to see what might be wrong: Drag a photo from iPhoto onto the Mail icon in the Dock. It will create a new message with the photo attached. If you click on the photo in Mail, it should show a popup menu to allow you to set the image size to send.
Check out some of the links in the More Like This section to the right. There might be some other suggestions. -
I am un able to send mail as it gets stuck in my outbox. This is a recent phenomena. I am sure the solution is simple but need help?
I looked everywhere for a solution - and I finally figured it out! Deleting my accounts didn't work, but here is what worked. This worked when my Gmail accounts were not sending properly. I'm not sure if it works for other e-mail services.
1. While in Mac Mail, click "Mail" in the top left corner of the screen
2. Click "Preferences"
3. Click "Accounts"
4. Select your account that isn't sending properly
5. In "Outgoing Mail Server (SMTP)" there will be two options - Gmail & Gmail (offline)
Make sure that "Gmail" is selected and NOT "Gmail (offline)"
If you navigate to another section in Preferences, it will ask you to SAVE - make sure you save your changes!
It worked for me, hope it works for you!
Maybe you are looking for
-
Every 20 seconds or sooner a box appears asking for my keychain password. It can be for Safari, Mail, Calendar, iCloud. How do I get rid of this?
-
Recurring Posting with Tax Code
Hi Experts, When i am trying to execute a recurring posting with some Tax Code system is giving error "location is missing". So kindly tell me is it not possible to execute a recurring posting with tax in SAP Business one Thanks in Advance
-
Retina//Does Apple upgrades SSD if i pay for it?
Hi, The title speaks for itself as i want to learn weather they upgrade the ssd if i pay its price? I also would love to learn about ram also but i dont think they do it as it is soldered to the mb. Maybe they upgrade ssd because it is an easy proces
-
Count of total number of rows, distinct count of column
Hi , I am looking for a procedure that will insert following data into columns : Table_name Column_name COUNT(*) , count(DISTINCT COL_NAME) EX: Employee emp_name 5000 4500 Employee emp_location 5000 10 I want this for the whole schema. I have a proce
-
ORACLE ODBC 8.1.7.6 and Access 2000 (RAMDAC 2.7)
I wanted to use a Pass-through query in microsoft access 2000 and got some inexplicable results. I Use - Oracle ODBC 8.1.7.6 - Microsoft Access 2000 - RAMDAC 2.7 Server Oracle-Version = 7.3.4 Server NLS_LANG = AMERICAN_AMERICA.WE8HP Server Language =