Simple but not to me

hey there. I recently got a Zen V GB. Is there a way to erase files on my player to make MORE space on my player?I go to erase some media files, but it doesn't seem like it's showing any more free space. Im just wondering what i would have to do to get more space WHILE keeping my original songs on there.

I'm not sure what you mean by downloaded.
* Is the problem with Firefox displaying the page on the screen, and part of the text is off the right side of the screen? If everything is gigantic, your Firefox icon might be set up to start in a low resolution. If only the page content is too big, it could be an issue with Zoom.
* Is the problem with printing the web page, either to paper or PDF? If you use Print Preview and adjust the scaling setting (e.g., change Shrink to fit to something like 90%), perhaps you can get it to work. There are some sites that do not Shrink to fit.

Similar Messages

Very simple, but not working Table to Flat File

I'm new to ODI, but I am having too much difficulty in performing a very basic task. I have data in a table and I want to load the data to a flat file. I've been all over this board, all over the documentation, and all over the Googles, and I can not get this to work. Here is a run down of what I have done thus far:
1. created a physical schema under FILE_GENERIC that points to my target directory
2. created a logical schema that points to my new physical schema
3. imported a test file as a model (very simple, two string columns, 50 chars each)
4. set my parameters for my file (named columns, delimited, filename resource name, etc.)
5. created a new interface
6. dragged my new file model as the target
7. dragged my source table as well
8. mapped a couple of columns
9. had to select two KMs: LKM - SQL to SQL (for the source) & IKM - SQL to File Append (for the target)
10. execute
Now, here is where I started hitting problems. This failed in the "load data" step with the following error:
+7000 : null : java.sql.SQLException: Column not found: C1_ERRCODE+
I found a note on the forum saying to change the "Staging Area Different From Target" setting on the Definition tab. Did that and selected the source table's schema in the dropdown, ran again. Second error:
+942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist+
This occurred in the "Integration - insert new rows" step.
The crazy thing is that in a step prior to this ("Export - load data"), the step succeeded and the data shows up in the output file!
So why is ODI trying to export the data again? And why am I getting an ORA error when the target is a file?
Any assistance is appreciated...
A frustrated noob!
Edited by: Lonnie Morgan (CALIBRE) on Aug 12, 2009 2:58 PM

I found the answer. But still not sure why this matters...
Following this tutorial, I recreated my mapping:
[http://www.oracle.com/technology/obe/fusion_middleware/ODI/ODIproject_table-to-flatfile/ODIproject_table-to-flatfile.htm]
I was still getting the same error. I reimported my IKM and found that the "Multi-Connections" box was unchecked before and now it was checked. I may have unchecked it in my trial & error.
Anyway, after running the mapping again with the box checked, the extract to a file worked.
So, I'm happy now. But, I am also perturbed with the function of the this checkbox and why it caused so much confusion within ODI.

Simple but not for me.. Formatting question

Is there a way to change to format from the Imovie format DV-NTSC to any of these 3g2, 3gp, 3gp2, 3gpp, 3p, asf, avi, divx, divx, dv, dvx, flv, gif, moov, mov, mp4, mpeg4, mpg4, mpe, mpeg, mpg, qt, swf, wmv, xvid. I have looked around and have not grasped the full use of anything computer related> thanks for any help Sarah

goto share
choose Quicktime
click expert settings
in the following dialog, you get some of your mentioned codecs in the drop down menu....
some of your mentioned codecs are not natively supported by Quicktime tecnology.. but plug-ins add some features, as divx, wmv (www.flip4mac.com) etc...
for some codecs you need thirs party apps, e.g. swf/flv is created by Adobe Flash, ffmpeg etc...
the codecs depends much on your goal... to what purpose you need a converted file? e.g. 3gp is for use on mobiles...
in a few days (weeks?) a new all-in-one-plug in will raise its head, called PERIAN.. not available (in public) yet... I'll keep you informed here...

Simple but not ....

Hi,
I have two databases 'A' and 'B' and I have a 'EMP' table on 'A' database and I want to execute all DML commands from
database 'B'. How can I create a link. Both the databases are on the same server 'sub.ax.com'.
thanks in advance
ravi

Hi Ravi,
you can create dblink from one database to another.
using
"create database link xyz connect to <username> identified by <password> using
connect <'database alias'>"
to access the table from another schema you have to use the link
desc tablename@xyz
try this out.
and if u get the problme in this
use
"alter system set global_name = false"
in that database in which u have craeted the link.
best of luck.
atul
null

Jar Files download Slow in IE but not FireFox

We have an application (PTC Windchill) that uses jar files within the application. These jar files contain our customizations and get downloaded to the users when they require certain functionality within the application. Each time we update our build (update the customizations) new jar files are required to be downloaded to the client. Recently, we have seen an increase in the number of clients that the downloads take an extremely long time. The jar files add up to about 70mb and on a machine that we consider to be working correctly, this takes less than a minute. On some machines, it takes as long as 20 minutes. We are unable to determine what the difference is between computers (both have the same version of JRE, OS, IE and updates etc.). What is interesting, is the files download quickly on FireFox, every time on every machine. We initially thought this was an IE issue, but we can't pin point it. Also, the files transfer fine through the OS so we don't believe it is network or NIC related. This started out as just a few computers but seems to be growing. We have found upgrading to Apache 2.x.x from 1.3.27 fixes the problem, but breaks something else in our application, therefor is not a solution. This would appear to be an IE and Apache compatibility issue, but why it works with some clients and not others, puzzles us. I was hoping someone out there may have some ideas of what the issue is. It is probably something simple, but not simple to find. Any help is much appreaciated.
Thanks,

It's probably an IE problem.
The installed JREs on the client machines have no relationship with downloading via a browser.
It works fine with firefox because this latter is an open source and frequently upgraded. There are lot of firefox plugins and extensions for downloading tasks: https://addons.mozilla.org/en-US/firefox/search?q=download&status=Array
You can allocate more resources for your server and use a multi-thread donwload servlets but it will not resolve the problems of the client side IE browser.

My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphon

My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphone without loss my date?
Thanks

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

Hi I recently destroyed my iPhone 4 before replacing it I backed it up through iTunes... I restored my new phone from my old one's back up but not one single picture was copied.. Did I lose all my pictures or is there a simple solution???

Hi I recently destroyed my iPhone 4, before replacing it I backed it up through iTunes... I restored my new phone from my old one's backup but not one single picture was copied.. Did I lose all my pictures or are they just hiding on my com?? is there a simple solution??? I thought I was doing everything right by backing up my old one first... now Im scared I lost everything including a lot of very important pictures.. PLEASE HELP!!

Restore from the backup!
You password: You have set it! It might be your passcode or you mioght have set it accidentally, so test all of the passwords you normally use. If you cannot get the password you backup is lost, but you can still sync your iTunes content.

Why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Simple buttons working in Preview, but not on iPad

Hello everyone. I have a Button (I'm working in InDesign CS6), with instructions "Go to State". It links to a photo on a seperate layer. The link works perfectly in the SWF preview (shift-command-return). But when I update the file to view it in Adobe Viewer it does not work. (I am using Viewer Vers 25) There are no other functions on the page that could be "blocking" it. In fact, on some pages where there are two or three buttons (all of them with instructions of "Go to State"), 2 may work and one not. I am confused as to how I can see it working in the Preview, but not on the iPad. Any suggestions appreciated. Many thanks!!

Bob, just got in and downloaded the patch - the buttons are working perfectly now!!
Thank you for taking the time to help me out!! I'll be more diligent from now on in checking for updates. Thanks again. James

Can send but not retrieve emails using Thunderbird and Windows 8.1

Hi, I am not able to get Thunderbird to retrieve emails on a new laptop.
Last week I purchased a new laptop due to an imminent hard disk failure on my old laptop. I will call them "Old" and "New" laptops. (Old laptop is still working for the moment...)
The Old laptop is nearly 3 years old, and I have been using Thunderbird on it since new without any problems.
I have downloaded and installed Thunderbird on the New laptop, and can not get it to retrieve emails.
As the Old laptop is still working (at the moment), I am able to directly visually compare and check settings on both computers.
THE PROBLEM
Using Thunderbird on the New laptop, I am able to send emails, I can see all my old emails restored from the Old laptop using Mozbackup, but clicking Get Mail on the New laptop does not retrieve new
emails.
When I click Get Mail, the status message in the bottom left corner says "connected to .....<ISP>..." but does not actually get the emails. However, the Old laptop is still able to get emails as it always has.
My ISP is a large Australian telco that I have used for many years and I have not changed anything with my account. The ISP is POP3.
WHAT HAVE I TRIED
I deleted the email account created by restoring from Mozbackup, and attempted using the Thunderbird new account wizard, however Thunderbird did not recognise my ISP and would not create the account - even though it is working perfectly at the same time on the Old laptop.
All Firewalls I can find have been configured to allow Thunderbird, with the same configuration settings on both machines.
How do I know I can send but not Get emails from Thunderbird on the New laptop?
I have sent test emails to myself from the New laptop. Thunderbird sends successfully, I am able to preview the test emails via Mailwasher on the New laptop, and can read, reply, etc, to the emails if I log into my ISP webmail service. However I can NOT get Thunderbird to retrieve and download these emails on the New laptop. If I go to the Old laptop, Thunderbird works perfectly, retrieves and downloads all new emails, including these test emails.
I am now at the point where I do not know what else to try and would appreciate any suggestions.....
I have spent many hours over the last 3 days surfing the net, forums, Mozilla Support, etc, and tried everything suggested, without success. The only thing I have NOT tried is starting windows in Safe mode (as per some suggestions), as it is not a viable long term solution.
OTHER INFO
Computer Details;-
"Old" laptop;-
Windows 7 Home Premium - continuously updated with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed). Up to date.
MailwasherPro 2012 (subscription and licensed). Up to date.
Thunderbird 24.5.0 working perfectly. Up to date.
"New" laptop;-
Windows 8.1 - up to date with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed) - downloaded and installed. Up to date.
MailwasherPro 2012 (subscription and licensed) - downloaded and installed. Up to date.
Thunderbird 24.5.0 - downloaded and installed.
Note: I 'downloaded and installed' the Windows 8.1 version of these programs to avoid any potential compatibility problems restoring or copying from a Windows 7 backup version of the programs.
1) New laptop came with pre-installed with McAfee - which has been Uninstalled due to running Bitdefender (Windows searches for 'McAfee' return nothing found suggesting the Uninstall was successful).
2) Thunderbird has been added to both Bitdefender and Windows 8.1 firewalls on the New laptop.
3) Bitdefender and Windows security settings are identical on both laptops - as near as I can determine, I may be missing something - but have checked all settings 3 times by doing a side-by-side visual comparison.
4) Thunderbird settings are also identical and I am using the same email address and ISP that I have been using for many years.
5) I migrated Thunderbird settings, accounts and emails from the Old laptop to the New laptop using Mozbackup, then visually checked and compared all settings in Thunderbird between the two machines.
6) For info, I have used Mailwasher for many years as a simple way to preview and wash mail before running email programs such as Thunderbird - might be overkill, but I have also never had a virus or malware problem, so will keep doing this.
7) I have Uninstalled and re-installed Thunderbird on the New laptop twice, and done the same with Bitdefender once.
8) Any config changes I try on the New laptop, I either restart Thunderbird and / or restart the New laptop, or both.
9) I have not created a Windows 8.1 account and am not using SkyDrive.
10) Only other software I have installed on the New laptop is Google Chrome, Office Home 2013 and iTunes - all are working.
Thanks in advance....

Well there is not much left. If telnet works then the path is clear and there is no hardware firewall blocking ports.
All that is left is software, so try windows safe mode with networking. A very handy way to eliminate software. it also actually disables most anti virus resident features and is preferred here because anti virus/security programs do not always disable or turn off when they say they have.
You might also try the McAfee removal tool. https://community.mcafee.com/thread/52788 I notice the rep said yes to both, they did not say not required.
Finally you could try creating a new profile, and see if it works just to exclude corruption of your existing profile. ( I doubt it but I am at the anything goes point)
Just as an aside, I have never had an email borne nasty and I for many years never even had an email virus scanner. So yes I think your a bit over cautious with mailwasher, if that is what your using it for. Thunderbird does not support scripting languages or flash, or most plugins in the email sandbox. The result is getting a virus from a mail in Thunderbird is really only possible, for all practical purposes, if you open that password protected zip from the young Russian woman and that is what the anti virus should be blocking anyway when the temp file is written.

Applescript works in Automator but not as Application workflow

I have a pretty simple Application workflow in automator that runs this applescript:
set front_app to (path to frontmost application as Unicode text)
tell application front_app
activate
set bounds of window 1 to {0, 0, 1280, 800}
end tell
as you can see all it does is it maximizes the current window. it works when I run the script from within automator, but when i save it as an application and run that it says the applescript errored.
Why is my simple automator not working as an application?
Message was edited by: Pyrolistical

When you run that script as an application it comes to the front and is therefore the frontmost application: it doesn't have a window to be maximised.
You would need to specify the actual application to have its window maximised:
tell application "Safari"
activate
set bounds of window 1 to {0, 0, 1280, 800}
end tell
Trying to find out which was the frontmost application before you launched the AppleScript application is going to to be difficult.

0CO_OM_OPA_6: Custom fields added, Data - available in RSA3, but not in PSA

Hi Friends,
I have added some custom fields to the 0CO_OM_OPA_6 data source. Following are the details.
1) Custom fields: ZZEBELN (Purchasing Doc), ZZUSNAM (Username)
2) Code populated in SE19 (BADI for this Datasource)
3) RSA3: Test extraction pulls the records for both the custom fields correctly.
4) RSA5, and RSA6 - Fields are unchecked for hidden and field only. They are made available.
5) Extract Structure replicated into BW and its pulled over from extract structure into Transfer structure.
6) Mapped to corresponding fields in BW update rule and transfer rules. (No routines or formulas exist)/
7) When load extracted into BW, data is blank for both the fields in PSA itself.
Our BW is 7.3 but we still use this datasource as 3.x transfer rules and datasource. In BW, it is connected to the Cube 0OPA_C11 via update rules and 3.x transfer rules only.
Is there any reason for the data being populated into the RSA3, where as not into PSA. Please consider the above points, and let me know if I have done or missing anything here in my steps. I have gone thru several forums and havent got any specific replies for such issues. Have you come across such issues, please share your thoughts and views.
Any of your replies will definitely help. Really appreciate your inputs.
Thanks!!
Prasith

Hi Prasith ,
After reading all the answers , what i feel we are missing a major step ie Re-initialization of the cube .
As you changed the extract structure and added new fields and for this Data source i assume that deltas were running already , the BW system cannot pull these new fields directly from ECC unless you have not done a re-INit again .
The Re-init is pretty simple and not as complex as LO.
I would advise you to re-init for 01.2014 till 016.9999 , run full load and then delatas will flow in later on . Check during the full load if you are able to see these fields in BW in (PSA/ Cube) .
But be careful you need to do Re-init only on week ends when there are no transactions happening else you might end up in duplicate data .
Hope this helps !
Let me know how it goes .
Regards
Zeenath

SATA Problem: Can see hard disks in USB enclosures, but not internal

I have a mid-2010 macbook pro 13". The other day, it crashed on wake-up, and would not boot. I had a OCZ Vertex SSD boot drive, and the OEM hard drive in an optibay enclosure (replaces the optical drive and used only for data). I used this setup for one year with no problems. After much troubleshooting, I found that I could see the SSD drive by booting into a recovery partition that I have on a USB stick, and putting the SSD in a USB enclosure. Then disk utility could see it, but not mount it. The label on the boot partition was "lion", but it changed to "disk1s2". I was able to repair the drive using disk utility, and then boot from it using the USB enclosure.
Once booted, I could still see the OEM hard drive with no problems. So I powered down and put the SSD back inside the case and rebooted. It booted in safe mode, but it booted fine. The next time I rebooted, it would not boot. I swapped the OEM drive and the SSD drive, and then the sytem booted with no problems and I was able to use both drives.
One day later, I noticed my OEM drive was no longer mounted in OSX. I took it out, put it in a USB enclosure, and OSX could see it fine. There were no errors on the disk. I put it back in the macbook and reboot but OSX couldn't see it.
So, the primary SATA port seems to be working intermittently. Three times now, a drive has stopped working on this port. Each time, I could use the drive in an external enclosure (or using the other SATA port normally used for the optical drive. Does anyone have any ideas? Could it just be the cable? It is the motherboard?
I'm trying to make this computer last at least another month or so because I need to upgrade to a larger model, and am holding out for the 2012 release.

Could be something as simple as the cable...they have been known to go bad. Got an Apple store nearby? If so, it's a cheap/easy replacement.

HT201210 My download for iOS 7 was interrupted, it has downloaded but not installed. it goes through routine Terms & Agreements and everything, but when i try to update it tries to verify the update then says that the update is not available.

I dont understand, when i try to update it will go through routine apple stuff, then it it will say " Software Update Unavailable (under) Software Update is not available at this time. Try again later." The thing is that i was downloading it and my wi-fi had restarted for some unknown reason and it downloaded onto my phone but not installed. and at the moment it is really bothering me because I have waited a long time for iOS 7 and I am not being allowed to update my phone to it and i just wanted to know how to fix it. Thank you.

I imagine a ton of people are attempting to download it right now. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

How do I download an app from the Mac App Store but not install it yet?

How do I download an app from the Mac App Store but not install it yet?
Can I simply download it and not install?
What if the App gets updated before I download it?
Why? Well, I am very busy and wish to install at my leisure even though I have purchased the App (required at a specific day in the month in order to appear on my business accounts).
Thanks.

There is a difference in what Kappy stated and what you stated. A major paid upgrade (v2.x to v3.0), yes, costs money, as it would in any other delivery stream. Updates (v3.0 to v3.1) to a a major version are free.
Most apps sold through the Mac App Store (MAS) are the type that use the simple drag & drop installation. Those are downloaded directly to the designated apps folder and installation is done. Large pro-type apps download an installer to your Apps folder. Those you can install at your leisure. The MAS does not have a lot of apps using this type of installation.
Be sure to always backup your MAS purchases, because there is no guarantee that the app will always be available for download in the future and it is your responsibility to archive copies.

Simple but not to me

Similar Messages

Maybe you are looking for