Simple color control panel.

My largest beef with Lightroom is that for the most part, the HSL sliders are good for creative color but difficult and slow for color corrections. And the white balance controls are terrible for color corrections when used to an RGB system as used in Photoshop (RGB Histogram, RGB Curves and probably the most useful, least appreciated tool the Color Balance controls.)
What I suggest is either a panel on the main Develop module with essentially the Photoshop Color Balance controls (perhaps plus a density slider) with the ability to switch to an RGB Histogram or Curves mode as well. Or better yet, an additional module that has these controls plus Density, Gamma, Contrast, Saturation, Vibrance and a customizable display of one or several images for easy color corrections and display of reference images and/or a selected image in the set to help aim color and skin tones towards.
Any improvement in the speed and ease of color correction would be great.

Similar Messages

HP LaserJet Enterprise 500 color MFP M575 control panel display

HP LaserJet 500 color MFP M575 have no Display. and is not anymore possible access any function. What is the problem behind that ?How can we solve this issue ? is it the problem with the control panel display or the logic board ? there is no dim memmory instaled in the system .

Good day,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Color Laserjet pro MFP M176n control panel not working

the control panel in the Color Laserjet pro MFP M176n is not working, is all blank, i can´t see anithhing in it. Is there a reset button or should i take it to the store where i buy it for a checkup?
thank you

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Where is the Color facility in the Control Panel?

I can't change push button attributes and from the posts I've read, I should change them in the Color facility in the Control Panel. But I can't find this.
I am using forms 9i, and Windows XP Pro.

What is it that you want to do??? As far as I understand, you want to change your environment settings to get a different color????? That's a bit odd, since you will get that with every application. And you said you can't change push button attributes???? Also odd. Or do you mean you're not allowed to change the colors?
Anyway... you can change the color of the button within formsbuilder. Select the button then open the properties panel and change property background color.

Windows Color Management in Control Panel Settings?

I know enough to disable color management in the printer driver when I enable my photo editing software (PS Elements) to handle color management.
However, what should thecorrect setting for Color Management be in the Windows 7 Control Panel.
Assuming I have selected my printer in the device setting and have uploaded the ICC profile for my printer in = Windows Color Management in the Control Panel
do I check the box next to "Use my settings for this device" ?
do I select "Automatic (recommended)" or "Manual" in the Profile Selection box ?
do I check "Use as Default Profile" for my paper's ICC profile ?
or will my graphics program automatically override all the settings in Windows Color Management in the Control Panel?
If the graphics program does not override the Windows control panel settings, what is the proper permutation of settings.
Thanks

Good question seweavermm.
Access to video card control (if available) is typically done through either System Preferences on a Mac or the Control Panel on a PC. The good news is that since you don't know how to do this then it is high probability it is in default mode and is a moot point. It is my understanding that not too many video cards have settings that are not reset by the by the actual calibration process itself yet put this step in for completeness. The more important and common condition that must be done is setting the monitor to a condition that is stable and allows access to its full gamut. I suggest to read the details of the instruction manual for the OSD controls for your monitor to verify that the default conditions meet those chacterisitcs. Typical gotchas would be defaulting to sRGB color space which would limit the colors you could see or having a mode set that does anything dynamic such as scene adjusted brightness. Another gotcha is when the monitor and software allow adjusting brightness for the ambient light - best to control the ambient light and have the monitor at a constant brightness so as not to invalidate any calibration/profiling done with the monitor. Note that changing any OSD settings and fiddling with monitor conditions invalidates the calibration done as the calibration is only valid for the fixed conditions of the monitor at the time of calibration. That was a lot more then the question you asked yet wanted to put things in perspective. Hope this helps.

I'm having trouble signing into the iCloud Control Panel. None of the iCloud suggested fixes work. I'm using Windows 7 on a PC. Is there a simple fix out there?

I'm probably doing this all wrong. Just in case here it is again.
I'm having trouble signing into the iCloud Control Panel. None of the iCloud suggested fixes work. I'm using Windows 7 on a PC. Is there a simple fix out there?

asdfjava-er wrote:
The book that I'm using said it wasn't necessary for this because it's supposed to just make sure everything is working properly--which it's not.OK, if you want to ignore my advice, so be it, but please don't complain that it is not going to work without even trying it yourself.
asdfjava-er wrote:
Now this is the part I don't get. The book tells me to go to http://localhost:8080/ch1/Serv1 even though there are no files/folders that have the name Serv1.
Do you understand what the <servlet-mapping> declaration in the web.xml means? It is roughly just saying the appserver that it should port all requests on /Serv1 to the mentioned servlet.
a couple others like/ch1/WEB-INF/classes/Ch1Servlet.class and /ch1/WEB-INF/web.xml. The WEB-INF folder is not public accessible, so forget about that part.
"Resource not found" simply means that either the URL is wrong (case counts!) or that the resource is actually not there. I.e. not compiled, not deployed, not loaded, etcetera. Reading the appserver's startup logs might also help.

How to convert U32 value obtained from color control of front panel to float(SGL) for use with IMAQ Draw ?.

I am trying to get user color inputs from front panel and use it in IMAQ Draw. I need to draw an oval of a certain color in a background of another color. Both these color values are user input. The problem is IMAQ Draw requires SGL color value and the color controls of front panel give U32. I have tried conversion VI's which hasn't worked. HELP !!!

Jake,
I think the color control can be wired directly to the input, but I am not positive. I don't know of any color conversions that would help.
Make sure your image is a color image. You can't draw colors on a grayscale image.
You might want to consider using overlays, which appear on top of the image but are not part of the image.
Bruce
Bruce Ammons
Ammons Engineering

Screen goes to neon colors in Intel HD Graphics control panel

This computer comes with an Nvidea 850 GTX + 4gb card
Whenever I try to change brightness settings in the HD Graphics control panel, my entire screen become illegibly pixelated and turns to neon colors. I can't read or see anything exept pixels and neon colors when this happens. This happens when I move the slider, I don't even need to apply the settings for it to happen.
The only way to get back to a normal display is to close my screen and open it back up again.
How can I fix this? I just got this computer after sending another one back for a hardware issue?
Thanks!
UPDATE
This problem is no longer occuring, please mark this as solved! I don't know what the solution was, I haven't done anything.
Thanks!
This question was solved.
View Solution.

Hi @Emmaus7
Thank you for visiting the HP Support Forums and Welcome. I think that a restart updated the software which has resolved this issue.
Thanks for sharing with us.
Have a good week.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Excel-2007 cannot connect to Oracle ODBC data source, Control Panel can.


I cannot make an ODBC connection from Exce-2007 to Oracle work. I am an expert Excel and VBA user (since 1994) and I have frequently used Excel to access ODBC databases, including Oracle (I have done this with Excel-2003 both with worksheet queries and have written VBA ADO-connection routines). And even though in Excel-2007 a worksheet ODBC query is supposed to be easier to create than in previous version of Excel, my connection fails. Any suggestions and all help are welcome and much appreciated.
DETAILS


1) What is my system? I am using Excel-2007 on Windows Vista x64 and Oracle server v.11g on my computer (all this is on my computer, no network issues).
2) Why use Excel with Oracle at all? I use Excel-2007 to access Oracle rather than Access-2007 (or any other application like TOAD, etc.) because I do engineering calculations with the data stored in Oracle. These calculations are easier done in Excel (I suppose that one alternative to this could be to use some sql or Access to get the data from the database, then store it as plain vanilla CSV file, then open this file in Excel, then do the math (the math involves complex optimisation algorithms), then save the results as CSV, then use some sql or Access to put the data back into the database. Howwever this does not strike me as a quick or neat solution. And after all Excel has been designed to access ODBC databases, so why not use it?)
3) What do I do in Excel-2007 that won't work? I create an ODBC link to Oracle that does not work. In Excel-2007 this is straightforward:

<ul>
<li>define an ODBC connection (Data tab --> From other sources --> From data connection wizard);</li>
<li>define a query on the worksheet -- that's it, this is all!</li>
</ul>

I start with creating an ODBC connection:
a) I choose an ODBC data source type: ODBC DSN
b) Excel-2007 displays the list of the available ODBC data sources. I see in it my Oracle database name and I select it.
c) Excel-2007 displays the Data Link Properties:
- the "Provider" has a list of the OLE DB drivers with preselected "Microsoft OLE DB Provider for ODBC Drivers". I keep this default selection.
- the "Connection" tab has a connection string "DSN=<my database name>" which I keep, it also has fields for the user name and the password, which I fill with the correct credentials.
- Finally there is a button "Test Connection", which when I click produces the following error message:
"Test connection failed because of an error in initializing provider. 
Unespecified error"

4) Additional food for thought:
a) In the above walk-through the only data, which I type, are the user name and password, everything else is selected from lists offered by Excel-2007, hence any possibility of typos being the cause of the problem can safely be discarded.
b) I can test the ODBC driver in the Control Panel and it shows that it can connect to the Oracle database:
- in Control Panel --> Admin Tools --> Data Sources (ODBC) on the "User DSN" tab I can see the list of the available ODBC data sources (same list as in Excel-2007, point 3b above) with the name of my database in it;
- selecting the name of my database from the list of the sources and clicking "Configure" button opens a tab with Data Source Name (same as in Excel-2007), TNS Service Name and User ID. I enter <user name>/<password> and click "Test Connection" button. A message "Connection successful" appears (just for a test I enter incorrect user credentials and "Unable to connect" message appears)
BOTTOM LINE


The procedure for using an ODBC connection from Excel is very simple, in the past I have created and used such connections numerous times with Excel-2003 and earlier on Win-XP and earlier. But now on Excel-2007 and Vista-x64 I cannot make it work.
Also, testing an ODBC connection driver is really easy and simple to be done in the Control Panel. There testing the same ODBC connection, which fails in Excel-2007, results in success.
I am frustrated by the simplicity of the problem and yet the persistant error. I have lost now two full days in failed attempts to make the simple procedure work and in searching the internet for answers.
All help is highly appreciated <img class="emoticon" src="images/emoticons/happy.gif" border="0" alt="" width="16" height="16" />,
Plamen


Did you find the solution to your problem?
If not, I think I may know.
Excel 2007 is a 32-bit application.
When installing 32-bit applications in a 64-bit environment, the "default" location is:
C:\Program files (x86)\...
Excel then launches from this location.
However, when it connects to Oracle and passes the name of the calling program, Oracle attempts to "interpret" the value of (x86) as if
the value within the parenthesis are being passed as a reference. Of course, iOracle doesn't find anything, so the result is (),
and then it cannot return the connection info back to the calling application.
I corrected it by installing Excel in C:\Program Files\, and once launched from that location, it works the same as on the 32-bit machines.
However, at my location, they are FORCING Excel to be installed in the(x86) location.
What I'm trying to discover now is:
Is it possible to flag Oracle to NOT process the embedded variables?
Or, is it possible to assign a variable in Oracle such that x86 = "(x86)", so that the end result is viable?
Have you had any luck with your installation?
thanks,
Paul

2 iPhones, 2 iCloud Accounts but 1 Windows 7 PC. How do I use iCloud Control Panel so that changes made change both accounts?

Help!
We have two iPhones, each with an iCloud account as my wife and I have different contacts (some are the same though), text and e-mail requirements. However, my Win 7 PC will only allow one instance of iCloud Contol Panel to run at any one time, and so when a change is made to Outlook 2010, only one iCloud account is updated. I have got around this with the Calendars by sharing the information, so when I change my calendar it is reflected on her iPhone and iPad. But when I make a change to contacts, they are updated in Outlook, but not on her iPhone or iPad until I exit the iCloud Control Panel with my details and enter hers. It is way too easy then to end up with duplicates and alsort of chaos.
So what is the work around? Does anyone else have this problem?
Thanks in advance.

Hi Lars,
In the examples folder there are some examples for simple operator interfaces. In the programmer help file they is a section on creating a teststand engine and the steps involved. Uses these notes and say the LV simple operator interface you can match up the steps and how to achieve them. In the Resource Library under TestStand there are plenty of useful notes, code, presentations to help you on your
What you are trying to achieve is to start the teststand enine running from Labview. Open a sequence file. Once you have that sequence file loaded you can then start to manipulate the properties on that sequence, such as your local boolean.
Hope this gives some pointers
Regards
Ray Farmer
Regards
Ray Farmer

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel

I just installed Window 7 professional in place of Windows 7 Ultimate RC to which I subscribed. I was not pleased to do a clean install as opposed to an upgrade and was not informed about it.
When I reinstalled Office 2007, my outlook does not work, although exchange on the web works. I get the following error message:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel

Louis,
This issue may occur if the Outlook registry key is corrupted. When other programs try to use the Outlook Simple MAPI interface, they cannot retrieve the required information from the registry.
You must first remove the corrupted Outlook registry key, and then perform a Detect and Repair operation to have Outlook rebuild the key. To do this, follow these steps:
Click Start, and then click Run.
In the Open box, type regedit, and then press ENTER.
In Registry Editor, locate the following subkey in the registry: HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
Select the subkey, and then press DELETE.
Click Yes.
Quit Registry Editor.
Start Outlook.
On the Help menu, click Office Diagnostics.
Follow the instructions on the screen to complete the repair.
Important: Above section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows.
Hope above information helps.
Pooja Katiyar

Printer prints but display says Communication lost (device - control panel); Turn off then on.

HP Color LaserJet CM3530fs
The printer is printing when asked to do so by a computer but the display says:
Error
Communication lost (device <-> control panel); Turn off then on.
The orange attention light is illuminated and the display is always lit and shows the statement above.
It does not improve when switched off and on or power disconnected for long periods or pushing reset button at rear of unit.
Embedded web server works normally and thinks that all is ok.
Buttons on control panel do nothing. eg. I cannot photocopy or scan.
The printer is about 2 years old but gets very light use in a family home.
Please help
Thank you.
Haig

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

Palettes, toolbar, and control panel don't work in CS3?

I can't select pages from the "Pages Palette" or add or delete pages from the same palette. All of the palettes are having similar issues (i.e. Pages, Info, Layers, Links, Stroke, Swatches, Object Styles, Color, Effects, Gradient, Character Character Styles, Paragraph, Paragraph Styles, etc.) They are just unusable. Most of the toolbar work except for the selection tool which I can only activate by pressing (V). The control panel seems to be having the same issue. I've tried reinstalling and repairing the install on the entire CS3 package. I've tried reinstalling and repairing the install on just InDesign. Photoshop CS3, Acrobat, and Illustrator work fine....not sure about Dreamweaver, Flash, and the others.I've downloaded and installed all available updates for CS3 from Adobe's site.
Any thoughts?
Running on:
Windows Vista Home Premium 32-bit
Service Pack 2
Processor: Intel(R) Core(TM)2 CPU T7200 @ 2.00Hz
2.00 GB RAM

See InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

Simple color control panel.

Similar Messages

Maybe you are looking for