Simple Email Campaign - Extracting reports

Hi everyone,
I have a simple email campaign running (still active) and I am wondering how you can export the clicks, opens of this campaign. I can't see it in Insights as a campaign and there's nothing in the settings apart from campaign audit, entry and exit lists.
Thank you,
Edina

That's actually a very good point to make. Here's why I think it might not be working. Originally, that "Create a Simple Campaign" option did not exist. That came about during a release at some point last year. Prior that point, the only "Campaign" option was the Campaign Canvas (Create or Open) and the Campaign reporting was setup to be very literal because there are also automation programs in the Program Builder.
So, to make a long story short, it sounds as though Eloqua, for reporting purposes is defying their own literary definition here by treating a "Simple Campaign" identical to the old email send option from the email builder. This being the case, I would recommend that for the time being, you use the Email Analysis reports in Insight to look at the clicks/opens/etc of the campaign. However, it is probably a good idea to bring it up to your Eloqua rep because now that they have expanded the definition of what a "Campaign" is they should be more clear in Insights.

Similar Messages

  • CRM Email Campaign Report

    Hi,
    I am looking for a feasibility of BI-CRM report for email campaign.
    which can give me following details :
    No of mails sent.
    No of mails delivered.
    No of mails solicited.
    No of duplicate mails.
    No of bounced mails.
    Can you tell me some datasource or even CRM database table where I can get above fields. Is this kind of data is available in CRM server.
    regards
    vivek

    Dear Vivek,
    We can get all the Email related information in 0CRM_ERMS_ITEMS data source.
    Hope we can track all the requirements below..
    No of mails sent.
    No of mails delivered.
    No of mails solicited.
    No of duplicate mails.
    No of bounced mails.
    Best Regards,
    Maruthi

  • Customers have reported not receiving our email campaigns

    We have had customers report that they have not been receiving our email campaigns sent through ABC. We know their email addresses are correct and they appear to be sending out to every email on the list. We have also had reports that in some cases our emails have been sent straight to the spam folder.
    We were wondering if this was a known issue with ABC, since there isn't anything wrong on our end, and if there is anything that can be done to fix it.
    Thanks in advance for your assistance!

    Hi justinVortex,
    Please file a ticket with our support team from the Admin of the site -> Help & Support - > Create a ticket.
    Please make sure to specify which site, campaign and users this has been happening for.
    If you already have a ticket opened, please let me know the ticket number here and I'll chase it further with the support team.
    Thanks,
    Florin

  • Simple data extraction reports by SAPu2019s SQL

    Hi,
    Can you please let me know how can I develop simple data extraction report using SAP's sql.
    Regards,
    Koushik

    HI,
    I have to do a PoC on Data Quality checks. In which there will be few reporting tables. One will be daily agreegate, one weely agreegate etc. Now I have to show those the data in form of reports. and Option is also required to drill down and drill up for those reports.
    Please let me know if I am able to clarify my question or not.
    Regards,
    Koushik

  • Hard Bounces - Email Campaign

    My client sent out an email campaign to 81 recipients. The campaign generated 25 hard bounces. Is there a way to get more detailed information about the reason for these bounces? We are trying to evaluate this result -- a high rate of hard bounces (over 30%) Your reporting does not provide much information.
    Thank you.
    Catherine

    Hello Catherine,
    Please submit a case if you haven't already on this so we can investigate further with the following details...
    Site URL
    Email campaign name
    Is this happening with any other campaigns/sites?
    If there is any specific domain emails for hard bounce, please mention that.
    We'll may need to look into this further.
    Thank you,
    Sanjit

  • How to create activity template for email campaign in CRM 5.0

    Hi,
    I tried attaching only a simple activity transaction type (Z005) to communication type email in SPRO > CRM > Marketing > Marketing Planning and Campaign Management > Campaign Execution > Define communication medium.
    After doing this, I was expecting that when I execute my campaign for channel email, emails will be sent to the customers and activity transactions of type Z005 will be created for each outbound email.
    Activity transactions are created, but I think I would like to maintain more details (description, responsible org etc.), which should be possible using activity template.
    I am struggling with creating activity template. I created a normal transaction of type Z005 and tried to maintain it as a template (which was obviously wrong), and the system gave me a message that I need to attach a template transaction of template type D.
    How do I create an activity template of type D?
    Any help would be appreciated.
    Regards,
    Kaushal

    Hi Kushal,
    As your are in CRM 5.0 you can create Activity template from SAP GUI. Just execute CRMD_ORDER and select your Activity type (ZOO5) and in Menu click on Extras->Template->Create  just enter required details such as (description, responsible org etc.)  save the template it will create Activity template number. While creating Email Campaign just enter activity template number.
    Execute Email Campaign it should create Activity with required details.
    Regards,
    Dipesh.

  • How can I get the Email Campaigns Blog module to display correctly in Outlook?

    I'm having a bit of trouble with this. I've used the email campaign builder to build a campaign; added the blog module to it and applied a custom template to it so that it should display correctly, but outlook has other ideas...
    Here's what it should look like:
    and here's what outlook gives me:
    this is built within tables and the tables and cells all have set widths of 520px, yet the blog module seems to ignore this and somehow sit outside of them, breaking the template (BUT only in outlook).
    Is this a problem anyone has experienced before?
    Any ideas on how to fix it?
    Thanks
    Sam

    HTML Email Campaign design is still a very tricky beast.  There are no standards like the makers of the major web browsers have been pushing for and adhering to over the years for web designers so since there are any number of email clients like your native mobile phone email clients, desktop clients like Outlook and Thunderbird and then web-based email clients like Gmail, Yahoo!, etc. there's no standard to display HTML in emails so each client does things differently.
    Outlook and Gmail in the past have been the worst offenders. Fixing it is nothing simple.  You need to go into your markup and make sure every table has a width set both in the inline STYLE attribute as well as the WIDTH attribute on the TABLE element.
    Outlook 2007 and 2010 are both horrendous at displaying HTML uniformly- as it relies on the Microsoft Word rendering engine.  Most of the time for my clients I tell them that if the end user can read and click links in Outlook then it's a win-- they're used to seeing horrible formatted emails no doubt.  But, if you find most of your email list is using Outlook (corporate/enterprise customers) then you should keep tweaking it. 
    It's impossible to tell from screenshots what the issue is-- it's likely a markup issue if there is one.

  • Automated email campaign

    Hello all,
    We are attempting to setup a simple automated email campaign (CRM 4.0), but we seem to be missing a step.
    We have a campaign with a campaign element that has a target group assigned and a channel of Email. We can test the channel successfully from within the Marketing Planner (the email gets sent). So we know the email infrastructure is working.
    When we transfer the target group to the channel (either manually or via workflow), an email list is created (as checked by crmd_email_list), but no emails are sent. Is there another job that needs to be run to actually send the emails?
    Thanks!

    Hi Kori,
    please check the TRX SCOT , to see if Mails are sent out correctly.
    Over there you have to customize your mail server for the mails you send out.
    Particularly check in options "default domain".
    Hope this solves the problem. Please reward with points if helps.
    AndreA

  • Mail.app messing up reply address for simple email addresses.

    Anybody else get this problem? When an email comes to me with the following looking "From" field:
    From: <[email protected]>
    That's with greater than and less than character at the start and end of it. It messes up the reply address.
    When I reply to one of these emails Mail.app sets the "To:" field to be:
    "[email protected]> <[email protected]" <[email protected]>
    When it should just be:
    To: [email protected]
    Anybody get this behaviour?
    Incidentally, you can search for these kinds of simple emails in Mail.app by searching in "All Mailboxes"/"From" for:
    <</div>
    That's greater than, space, less than.
    Cheers Daniel

    The Apple Bug Reporter give you some templates to use. Just make sure it is crystal clear. You might also want to provide a link to the specific section in the standard: http://tools.ietf.org/html/rfc2822#section-3.4
    where it says "display-name" is optional when used with an "angle-addr"

  • Hotmail blocking images & all content from email campaign

    I recently sent a campaign for a new client who have an existing BC site and have sent many email campaigns.
    However it seems this one had the content blocked a lot by people with Hotmail addresses, so all they see is a blank email.
    I imagine it could have to do with the content, as it was a "free offer/gift" type of thing, with that kind of wording..
    Any suggestions, apart from getting rid of the words "free, gift, offer" etc..?

    Hi Trina
    Not really. The biggest advice I can give you is to do thorough testing.
    At Pretty Digital we have a VMWARE server set up in the office thats loaded with 30 virtual computers set up to mimic all the main browsers / operating systems and email clients. We do thorough testing like this.
    For simpler setups you can use something like Litmus -  https://litmus.com/email-testing
    We've used this before and it's pretty goodhttps://litmus.com/spam-filter-tests
    They also have an additional services that does SPAM SCORE testing. This flags any content issues so you can adjust your content and try again.- https://litmus.com/spam-filter-tests
    What you might like to do is team up with another agency to share a litmus account (if you want to be sneaky) we may or may not have done that before. .
    Hope that helps.
    Brett Stockley
    e: [email protected]
    w: www.prettydigital.com.au
    s: brett_stockley

  • When I send a webpage via email, some of my recipients are unable to see it properly. The website was made with iWeb, and a Mac person advised me this was the best way to do an email campaign with iWeb, but it's not working for a lot of my customers - why

    I have recently created a website for my family's business. When we bought the Macbook the guy in Apple said the best way to send an email campaign to our mailing list was to publish a hidden page, find it in the browser on Safari, then share it via email, so that is what I do. For most of my customers this works fine, however I have a number of people each month who cannot see any of the content of the email. I have added an 'If you can't see this email properly...' link at the top of the page, with no shapes or images etc near it, but even that does not appear for them.
    I am a self-taught novice unfortunately, so haven't a clue what the problem is. I'm not sure of the operating system, but we bought the Macbook in May and it has all the recent updates installed. I have just had a new baby so can't get into the store fdor a one-to-one, so if anyone could explain why this happens / what I can do about it, I would be very grateful! Thanks!

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Cannot Send Email from Crystal Reports Viewer; MAPI:Overflow

    I am trying to send a report via email with crystal reports, but i get the following error message:
    "The following unexpected error occured while trying to send the report to MAPI: Overflow."
    I am using Outlook 2010, Win 7 x64 bit.
    Does anyone have any ideas or thoughts?

    Yes, it is a 3rd party app that opens Crystal Reports Viewer.  Attached are the screen shots I get when try to send the report as an email.
    -Dan

  • Extract report only runs on a single core

    I am running the following extract report on a dual quad-core processor server with 32 GB ram and when I suppress empty rows the process runs on a single core which of course runs at 100% slowing down the process, but if I do not sppress rows all cores are used. Has anyone else experienced this or can i modify my report to improve performace?
    <PAGE ("Years")
    FY06
    <COLUMN ("Time Periods")
    {SUPHEADING}
    {Width 20}
    <DIMBOTTOM "Time Periods"
    <ROW ( "Market Segments","Object",Entities, Currencies,Years,Scenarios, Versions,HSP_Rates,Accounts,"Data Type")
    {NAMEWIDTH 30}
    {TABDELIMIT}
    { ROWREPEAT}
    {MISSINTTEXT "0"}
    {SUPMISSINGROWS}
    { NOINDENTGEN  }
    { SUPCOMMAS  }
    { decimal 4 }
    <DIMBOTTOM "Market Segments"
    <DIMBOTTOM "Object"
    <DIMBOTTOM "Total Company (Mgmt)"
    Local JPY USD CNY GBP
    <DIMBOTTOM "Scenarios"
    <DIMBOTTOM "Versions"
    <DIMBOTTOM "HSP_Rates"
    <DIMBOTTOM Accounts
    <DIMBOTTOM "Data Type"
    !

    One item unrelated to the DimBot issue:
    If you have a time period that can be used to restrict on (for suppression), you can use the restrict approach rather than the sup missing, ala:
    <RESTRICT (@DataCol(11) <> #Missing )
    I'm not sure I would attempt this if you had to deal with multiple restrict's though -- I'm also not entirely convinced the savings would be substantial, but it could be based on the multiple core aspects.

  • Follow-up email triggered on email campaign click

    I am wondering if it is possible for a follow-up email campaign to be triggered once someone has clicked a link in the previous email.
    For example, I want to send out an email to subscribers of an email campaign, with a link to an informative webinar. I then would like only those that have opened the email, and preferably clicked the link, to be sent a follow-up email (a day or 2 later) with extra contextual information that assumes they have watched the video.
    My needs are not limited to this example, but hopefully you get the idea.
    How might I go about doing this?

    Hi Dayle,
    You can't trigger campaigns based on a user's interaction with the e-mail content itself, if it points externally, but you could try to redirect the user to a BC page where you could auto subscribe him to a "follow-up mailing list" before redirecting to the video itself, as per your scenario (or having the video embedded there). In regards to enabling the webform to properly autosubmit the apropriate information, you could build the link by this pattern: http://yourBCwebsite.com/landingpage?email={module_emailaddress}&fullname={module_fullname}. This way the url will be different per each user clicking it, but it will point to the same page. On that page you can prepopulate the subscribe form fields with {module_url,email} and {module_url,fullname}
    Kind Regards,
    Alex

  • Email sending: "sending report output directly to the body of the email"

    Hi
         I got one requirement.this is the enhancement to already exisitng report.when user clicks on send email check box,report has to be display and this report output has to be send to email of the particular vendor. it has be seen directly in the body of the mail.not as attachement.Report output is in ALV format.Data is stored in internal table t_data.can anyone suggest what is the procedure for this.

    Hi i have tried the same thing and it works very fine,
    i will share my code, you just follow exactly, hopefully you can solve the issue..
    you refer clearly the body of the mail,
    it should solve your issue/
    FORM send_email .
        DATA  lt_message     TYPE            bcsy_text.
        DATA  lv_mail_title  TYPE            so_obj_des.
        DATA  document       TYPE REF TO     cl_document_bcs.
        DATA  recipient      TYPE REF TO     if_recipient_bcs.
        DATA  send_request   TYPE REF TO     cl_bcs.
        DATA  sent_to_all    TYPE            os_boolean.
        DATA  bcs_execption  TYPE REF TO     cx_bcs.
        DATA  wf_string(200)  TYPE            c.
    *    DATA  wf_string      TYPE            string.
        DATA  doc_execption  TYPE REF TO     cx_document_bcs.
        DATA lv_status(20)    TYPE c.
        DATA lv_count_email TYPE i.
        DATA lv_temp_stepcount TYPE c.
        LOOP AT wt_email INTO wa_email.
          TRY.
              CLEAR send_request.
              send_request = cl_bcs=>create_persistent( ).
    *Create Title
              lv_mail_title = 'Report Title'.
    *Create Message(EMAIL Body)
              REFRESH lt_message.
              APPEND '<p><b>Dear Sir/Madam,</b></p>' TO lt_message.
              APPEND '<p>The following report shows the status of </p>' TO lt_message.
              APPEND '<br>' TO lt_message.
              APPEND '<table border= "1" color = 2>' TO lt_message.
              CLEAR wf_string.
              CONCATENATE '<th><tr>'
                          '<td>Vendor  </td>'
                          '<td>Vendor Name</td>'
                          '<td>Coloun 1</td>'
                          '<td>Coloum 2</td>'
                          '</tr></th>' INTO wf_string.
              APPEND wf_string TO lt_message.
              LOOP AT wt_itbl INTO wa_itbl WHERE vendor = wa_email-vendor. "-> Define your Condition here wt_email( should contains vendor and its respective email id)
               CLEAR wf_string.
                CONCATENATE '<tr><td>' wa_itbl-vendor '</td>' INTO wf_string.
                APPEND wf_string TO lt_message.
                CONCATENATE '<td>' wa_itbl-Vendor_name '</td>' INTO wf_string.
                APPEND wf_string TO lt_message.
                CONCATENATE '<td>' wa_itbl-COL2 '</td></tr>' INTO wf_string.
                APPEND wf_string TO lt_message.
                CONCATENATE '<td>' wa_itbl-COL3 '</td></tr>' INTO wf_string.
                APPEND wf_string TO lt_message.
              ENDLOOP.
              APPEND '</table>' TO lt_message.
              APPEND '<br>' TO lt_message.
              APPEND '<p><b>Thank You</b></p>' TO lt_message.
    *Create Document
              CLEAR  document.
              TRY.
                  CALL METHOD cl_document_bcs=>create_from_text
                    EXPORTING
                      i_text         = lt_message
                      i_documenttype = 'HTM'
                      i_subject      = lv_mail_title
                    RECEIVING
                      result         = document.
                CATCH cx_document_bcs INTO doc_execption.
              ENDTRY.
    *Add document to email
              send_request->set_document( document ).
    *Add recipients to send request
              IF wa_email-smtp_addr IS NOT INITIAL.
                recipient = cl_cam_address_bcs=>create_internet_address(
                          i_address_string = wa_email-smtp_addr ).
                send_request->add_recipient( i_recipient = recipient ).
              ENDIF.
    *Send Email
              CALL METHOD send_request->send
                RECEIVING
                  result = sent_to_all.
              COMMIT WORK.
              IF sent_to_all EQ 'X'.
                lv_count_email = lv_count_email + 1.
              ENDIF.
            CATCH cx_bcs INTO bcs_execption.
          ENDTRY.
        ENDLOOP.
        IF sent_to_all = 'X'.
          SKIP 2.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          ULINE /(10).
          WRITE: / 'Remark : '.
          ULINE /(10).
          FORMAT RESET.
          WRITE: /  'Email Message Sent Succesfully'.
          RETURN.
        ENDIF.
      ENDFORM.

Maybe you are looking for

  • Difference between Scheduling agreement delivery schedule and PO delivery s

    Dear All, Please tell the difference between the Scheduling agreement delivey schedule and PO delivery schdule. In PO itself, we can give the delivery schedule. Then what is the purpose of making scheduling agreement and maintain schedule in ME38? Re

  • Resizing

    I have been given two photos of granddaughters. I have printed one to A4 size, the other was obviously taken further away and when resized to fit A4 the image is much smaller.  Is there any way to get the size of the girl to be similar to the other? 

  • Enterprise updating of Acrobat Pro 9.1 on Mac OS X?

    I am really frustrated. The only updater I can find for Acrobat Pro 9.1 for Mac OS X seems to require full manual control via GUI, and does not allow in any way for it to be applied via, say, Apple Remote Desktop, or via SSH. I have 50+ computers her

  • HT4972 update from iOS 5.1.1 to iOS 7

    i am not able to update my ipad from ios5.1.1 to ios 7 , when ever i click update it show me ur software is upto date. please suggest how to

  • How can I stop Adobe's updater?

    No matter what I do, C:\Program Files\Adobe\Adobe Photoshop CS4\AdobeUpdater.dll keeps on launching in the background. Thank you,