Simple file import question

I just installed Lr4 on my laptop.  When I plug in my Nikon D7000 and try to import photos, I just get a message "The following files could not be imported because they could not be read".  Then it lists the file names of the various files.  Message displays regardless if I try .NEF or .JPEG files.  The photos appear in the library module, so I know Lr is pulling them from the correct place (camera).  When I plug the camera into my desktop PC where I also have Lr installed, all works fine.  Help!

Sounds like a hardware problem, if the desktop reads things fine.

Similar Messages

  • File import questions and folder display questions

    I am running LR3 on Win 7 x64. I have a few questions.
    I have a hard drive assigned to drive letter "B:\" Why doesn't the file imported see this drive in the list of drives? I have to use the "other drives" and browse every time that I want to add files from this disk. Other drives, including networked drives are fine.
    When importing from a main folder and including subfolders, is there a way to filter files in any manner? I never want to import web galleries that I have made in bridge, for example. These files have very small JPG files, thumbnails and web images. Is there a way to exclude them form consideration whilst importing? Is there a way to reveal and show the thumbnails with the folder structure? I don't want to have to browse to every folder individually when I am trying to import all useful images from an entire disk. If LR would at least show the folder structure of the subfolders when you select photos from a top level folder, this would help. How can I do this?
    In the library view of folders, how I filter on all files in one disk? I can select a folder under the disk and see just that folder, but LR will not allow me to select the entire disk. Is there a way to do this?
    How can I display the entire folder structure in the laibrary panel? Some folders are not showing their top level folders that they are inside of. How do I reveal this information?
    In the library module, how can I filter on file dimensions? I thought that I had seen this, but I can no longer find this. Sorting by file dimensions would also be an option to accomplish what I am trying to do. I need to delete all thumbnail images and tiny images from the catalog. Is there an easy way to do this?

    No, because you don't import a whole disk, you only import images.  And the toplevel disk bar you see there is the disk where the top level folder is stored, not the entire disk.
    Let me make this clear.   When I want to view an entire disk,  I am only wanting to select images that I have already imported, not the entire disk including images that I have NOT imported.
    I am not sure if you dont understand what I am saying or what.  If you have folders of images inside a top level folder, you can easily select the top folder to see all subfolders that you have imported.  Why can't I select the disk as the top level folder to see all of the images that I have imported on that disk?
    I have a cattelog that has images from 8 different disks.  I use removable drive bays so all 8 disks are not available at any given time.  I just want the ability to select all images that I have imported on a disk, just like you can do at the folder level.  I am at a loss as to why this is a problem.
    My point about bridge was that LR is a far superior program for organizing images due to its database.  But LR is lacking in some features that could have easily been put into it.  If bridge can do the type of filtering that it does without a good database engine, then certainly LR could and should do it.  In no way do I want to use Bridge to manage cattelogs with 150,000 images.  That would be insane.  I have no issue with the fact that you have to import your images first to use LR.  It has to be this way to work with the database.  My issue is that the filtering is not nearly as comprehensive as bridge.
    I dont need help with my workflow.  Back when I shot many of the images that I am importing now into LR, there was no lightroom.  My workflow was much different back then than it is now.  My comments were that I assumed that LR could do things that it cannot, not that I needed help with my current workflow.  Much of the issues that I have now with LR are due to the old workflow and trying to import only the raw images.

  • Simple Library Import question

    I have a simple question pertaining to importing. I am used to iPhoto where you import all pictures into your "Library" folder. However in Aperture I find that I can import into the "Library" (which in turn also puts the picture in a "Project") and also import directly into a Project which sometimes doesn't seem to include the pictures in the Library.
    My confusion is what is the point of Library then if you can import into a project? (or have I done something wrong during an import?)
    Thanks in advance!

    An image is always in exactly one project. All the images in all projects are in the library. (Folders and albums are a little more complicated, holding pointers to images, not images.)
    Highlighting "Library" in the projects panel doesn't show anything (usually). If you highlight the All Images blue Smart Album under Library, it will show all the images in all projects. If that doesn't seem to be the case, it's probably because you're filtering images. Select "Show All" in the search box at the upper right corner of the Browser. It's easy to forget this, and panic because all or most of your images seem to have disappeared.

  • Premiere Elements 7: image file import question

    New question; I would check this out for myself but Adobe seems to have made it impossible for me to get a trial version.  It claims my Firefox has cookies disabled, which is false, and I have gone through every troubleshooting step on multiple sites, and gone beyond those, even, and no joy. I even specifically white-listed adobe.com and turned off all of my security software across the board.  If I log in on IE7 (as I am now) the download just fails with a trouble message to Microsoft; again, I followed all listed troubleshooting steps and total failure.  Judging by the number of irate and frustrated posts about this on the general forum this is a very common problem with Adobe's web site.
    Anyway...
    What I need to be able to do, simply stated, is to be able to import several hundred sequentially-numbered rendered 3D image files, have them automatically assigned to individual frames, set a global value for frames per second, and export a high-quality animation file.  Quick and without a lot of fiddly steps required.  I understand the format limitations but I can convert the animation later once it's been created.
    Can PE7 do this, easily and painlessly?
    Thanks in advance.

    My system is a dual core 3.2GHz Pentium with 2GB of RAM and well over 100GB of free disk space, and it gets defragmented regularly.  I use it for 3D modeling with Rhino 3D and LightWave and handle models with millions of polygons no problem.
    The problem with Firefox has nothing to do with system horsepower, it is that this site claims I don't have cookies enabled; I do.  I've gone through all the Mozilla troubleshooting steps, have explicitly whitelisted adobe.com in the browser setting, flushed cookies and cache, uninstalled every single add-on and plug-in I had installed, and even disabled my AV and firewall apps.  This site still claims I don't have cookies enabled.  It makes absolutely no sense and in all the years I've used Firefox on hundreds of sites I have never seen such a problem.
    As for IE7, I installed the download manager when prompted, and that app crashes every time I try to download the trial.  I have sufficient temp disk space enabled (the max of 1024 meg), again my system is way more than powerful enough, and I've uninstalled and re-installed the download manager twice.  No dice.  Each time after it asks me where to put the download file the DLM crashes.  I again disabled all security applications, and I don't have any special add-ons for IE installed because I don't use it as a rule.

  • Simple File Adapter Question [ XSD validity  ? ]

    Imported an XSD into JD 101333. [ several large, known as good, used in Biztalk etc ]
    tried to make ESB inbound adapter
    spent ages trying to find out why it wouldn't accept it [ then I found a tiny tiny paragraph in the manual stating it must have a namespace ?  why , honestly who cares ]
    2nd ; still won't validate, now it says "Invalid Reference" .. Which log setting do I switch on in Jdeveloper to see why it's throwing a hissy fit ?
    Note : this is a known good set of XSDs and is in use production ; for it not to import into JD is a major drawback to the people I'm evaluating BPEL/ESB for... so please help.

    2nd problem found .
    The XSD elements use a ref:
    e.g.
    <xs:element ref="MyMessageType"/>
    the solution is to add
    targetNamespace="http://my.validators.com/msgs"
    xmlns:pv="http://my.validators.com/msgs"
    in the schemadef
    now replace the xs:element with
    <xs:element ref="pv:MyMessageType"/>
    In all honesty where is this written in the manuals ? It's a fair question.
    Added to that you have NO hint as to what is wrong ; I had to deconstruct about 3000 lines of XSD to find the problem. since if you use "Validate XML" in Jdeveloper it works just fine.
    Massive hole guys.

  • Audio file import questions

    1.) What audio bit rate is considered good enough for a project in Premiere that might be played on the web or DVD? I'm guessing 128k is too low?
    2.) Does it cause any problems to work with different audio files in a sequence that have different bitrates, bits, khz? Should they all be converted to the same settings prior to being imported?
    Thanks.

    1. What is CFA?
    The CFA file is the Conformed Audio File, that PrPro creates, upon Import, for editing. This Adobe KB Article goes into more detail: http://help.adobe.com/en_US/premierepro/cs/using/WS9FAF538A-BEE3-4925-B45A-DF8BE7F2A2E5.ht ml#WS00AF9E2E-9F99-4aff-8961-1E2F30E9ECCC It is only used internally by PrPro.
    - I use AIFF instead of PCM/WAV, is that a bad thing in Premiere?
    - If I have a low quality WAV 22KHz 8-bit, are you saying that CS6 will upconvert it somehow to 48KHz 16-bit? I'm guessing that it does not improve sound quality of the previously lower quality sound file?
    A few users have had issues with AIFF files, but those issues could well have been specific to their particular files.
    The 22KHz material should Conform quite well, though it might take just a moment longer. PrPro is pretty good with "common" Audio files and also "common" attributes. Regardless of what you Import, PrPro will Conform it to 48KHz 32-bit floating-point, in the CFA, to edit.
    I have some older SmartSound libraries that are 22KHz 8-bit, and they Import and edit just fine. As most of my uses have been rather short in Duration, the time to Conform is hardly noticed with those files.
    Good luck,
    Hunt

  • .mp4 Video File Import Question

    I have imported my .mp4 home moves into itunes many times with no incident. I've used both the Roxio Popcorn app and also just add a .mp4 file to Library with no problem.
    Now I have a home video that I've just completed and want to add to my movie library but when I use either the popcorn app or just save it and then add to library the video seems to vanish.
    The little status bar at the top of itunes shows that its being imported, but when I go looking for it in Movies, TV shows etc then it is nowhere to be found.
    I have a feeling its there but I just cant find it. Its somehow hidden.
    Has anyone any ideas?
    Thanks,
    Steve

    Download and use MPEG Streamclip. Note that AVI is a container, not a format; you will need to know what codecs they support to be certain of creating a compatible AVI.
    (34335)

  • LightRoom 2.2 file import question

    Hi,
    I am about to start populating LR 2.2 with image data. I have 2 folders on my hard drive one is Canon G9, the other Canon G10. Each folder has sub folders each labeled with the date and location the images were taken.
    If I point Light Room 2.2 at say the top level Canon G9 folder and tell it to import the images will the top level folder labeled Canon G9 and the sub folders title information be retained as-is?
    Is it best to leave the program set to generate minimal previews?

    >If I point Light Room 2.2 at say the top level Canon G9 folder and tell it to import the images will the top level folder labeled Canon G9 and the sub folders title information be retained as-is?
    Yes, make sure to select "Add photos to catalog without moving" from the File Handling popup. Your folder structure will be maintained completely and be reflected in Lightroom. To make the Canon G9 and Canon G10 folders show up, you might have to right (or control) click on one of the subfolders in Lightroom and select "Add Parent Folder".
    P.S. it is a good idea to update to LR 2.3 RC (see top of forum). 2.3 fixes some major bugs with local adjustment and other issues.
    >Is it best to leave the program set to generate minimal previews?
    That depends on your editing style. If you first rate and cull, you might want to use at least standard previews. If the culling involves checking focus, it's better to render 1:1 previews at import. If you first start going into develop, then it really doesn't matter very much and you might be better off using minimal previews.

  • PSE4 file import question

    I am trying to import (get a photo) from a file (scanned a photo to file previously). The photo is a jpg photo (7.5 Meg, 11668X16524). After the photo is imported, I get an icon with an exclamation point in the middle square and cannot view the photo. How can I import this file?

    You may get a better answer in the Elements forum.

  • MOD file import question

    School has sent a MOD file, i can rename it as an MPG and play it in VLC but what do i need to do to get it into imovie 08? renaming as an mp4 didn't work
    thanks

    VLC can play .mod files via changing the extension, while iMovie'08 is unable to edit the files in this way. As people mentioned above, you have to transcode .mod files to iMovie workable format in advance via a third party software like mpegstreamclip, Pavtube mod video converter, etc. The good news is iMovie 9 is able to support this format as long as you connect your camera to it directly.

  • Simple File Dialog Question

    Using LabView 6i:
    When I display the output of the File Dialog all I see is the path to the
    folder containing the selected file and not the name of the selected file.
    How do I get the name of the selected file?
    Thanks
    TP

    TP;
    Are you sure you don't get the name of the file? Make sure the path indicator in the front panel is long enough. If the path string do not fit completely in the indicator, it will look truncated.
    Enrique
    www.vartortech.com

  • Simple file placement question.

    I have a situation where after the WAR file is deployed, PDF files will be added to the site that need to be accessable (their URL will be known) from the web. Where should these PDF files be put?
    For example, after the web app is deployed, a new PDF file called test1.pdf is created that needs to be accessable from my web site. Under what directory should test1.pdf be placed?
    The layout I have is:
    SunAppServer8
    ----domains
    --------testdomain
    ------------applications
    THANKS!

    I have a situation where after the WAR file is deployed, PDF files will be added to the site that need to be accessable (their URL will be known) from the web. Where should these PDF files be put?
    For example, after the web app is deployed, a new PDF file called test1.pdf is created that needs to be accessable from my web site. Under what directory should test1.pdf be placed?
    The layout I have is:
    SunAppServer8
    ----domains
    --------testdomain
    ------------applications
    THANKS!

  • Simple file sharing question. Bug?

    How do I simply add or edit a file using File Sharing or FTP to the Sites directory to serve a web page?
    In Snow Leopard I was able to edit a page from another Mac and save the file. In Lion any pages edited via File Sharing/FTP cannot be displayed any more.
    If I edit the page locally the page saves and can be displayed.
    If I edit the page via File Sharing/FTP (logging on as the same user) a permissions error is displayed in the browser.

    How do I simply add or edit a file using File Sharing or FTP to the Sites directory to serve a web page?
    In Snow Leopard I was able to edit a page from another Mac and save the file. In Lion any pages edited via File Sharing/FTP cannot be displayed any more.
    If I edit the page locally the page saves and can be displayed.
    If I edit the page via File Sharing/FTP (logging on as the same user) a permissions error is displayed in the browser.

  • How to import questions into Captivate 4 from a delimited file

    I'm looking
    a way to import questions from a delimited text file (or excel spreadsheet)
    into captivate.
    All the questions are simple multiple choice, single answer, four selections per question.
    I have hundreds - I'd hate to have to retype them all in one at a time.
    Thanks in advance
    -Joan

    Does anyone know if this is a feature in Captivate 5. 
    Other things I would really like to see in Captivate 5.
    Importing and Exporting the graded quiz/test content out of captivate into another
    application/ form.  Such as xml, tab delimited, excel spreadsheet,
    Adobe pdf, Word document or another format.  Our current content
    developement systems allows us to (when publishing) do this.
    1> exclude questions from the Published content
         (exclude section questions, or final test content)
    2> produce different test versions from question banks
    3> Produce a PDF paper test for when we want to train in a classroom setting
    4> Select which questions we want to produce
    5> Import questions from a pre-defined format.  To note: when we do this the system also makes us define a unique interaction id so that the import will update existing questions.
    I know this will NOT work for some of the more sophisticated questions, But for the simple Mulitple choice, true/false, fill in the blank.  etc..
    THIS WOULD BE A GREAT FEATURE..
    It would also be NICE TO HAVE THE abiliy to PROFILE versions of the SAME Course WITH OUT REPRODUCING / DUPLICATING / REPEATING THE  ENTIRE COURSE PRESENTATION.
    Such as
    "INSTRUCTOR TAUGHT TRAINING"
    "WEB TRAINING"
    "PAPER TEST A"
    "PAPER TEST B"
    ETC...
    LASTLY: if we can not export the QUIZ content.  Can an excel spreadsheet LIKE INTERFACE be used to edit certain aspects of the questions.
    Such as the InteractionId which is sent to the LMS ('cmi.interactions.0.id').  My developer team says it is real difficult and time consuming
    to track down interactionIds and then maintain them in a perfect way.
    Thanks,
    Doug Lubey of Louisiana
    www.douglubey.com

  • Adobe Captivate Help | Import questions from GIFT format files (Cp 7)

    This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/import-questions-gift-format-files.html

    Hi there,
    Captivate 7 doesn't support tags during GIFT import. So you won’t be able to import Images, links etc. as part of GIFT Import.
    Thanks,
    Nimmy Sukumaran.

Maybe you are looking for