Simple File to File scenario not working

Hi all,
I am new XI, please help me out, I am getting this error when i am monitoring the message
2006-02-08 17:59:09 Success Channel DEMO_CC_S: Send binary file "D:\Input\nagesh_input.txt". Size 190 with QoS EO
2006-02-08 17:59:09 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-02-08 17:59:09 Success Trying to put the message into the send queue.
2006-02-08 17:59:09 Success Message successfully put into the queue.
2006-02-08 17:59:09 Success The application sent the message asynchronously using connection AFW. Returning to application.
2006-02-08 17:59:09 Success File "D:\Input\nagesh_input.txt" deleted after processing
2006-02-08 17:59:09 Success The message was successfully retrieved from the send queue.
2006-02-08 17:59:09 Success The message status set to DLNG.
2006-02-08 17:59:09 Error Transmitting the message to endpoint http:
sapnet:8000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 501..
2006-02-08 17:59:09 Success The asynchronous message was successfully scheduled to be delivered at Wed Feb 08 18:04:09 IST 2006.

Hi Nagesh,
this thread is the solution to your problem.
No Adapters showing in Adapter Monitor
go thro this thread also
XI Installation : No adaters(except JPR) visible in Adapter framework
as given in the above threads to import take a look at:
Importing the XI Content for Software Component Version SAP Basis 6.40 SR1 from
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/sap xi 3.0 sr1 installation guide.pdf
think these links has full info to solve your problem.
regards,
P.Venkat
Message was edited by: venkataramanan

Similar Messages

File to IDOC scenario not working

I have configured a file to idoc scenario and kept the XMl file in a shared location on XI server.
I have also created and checked the communication channels correctly.
Once Everything is done my xml file does not get picked up at all. Also the SXMB_MONI does not show any messages for my service.
How do I find out what is the error ??

Hi Kapil,
Just check the File path that was in shared location once and the file name is properly mentioned or not..
And also one thing after activating all IR and ID just goto SXI_CACHE and press <b>F6</b> to update cache refresh
And also in RWB --> Message Monitoring --> Adapter monitoring --> check the status of the sender
Regards,
Sridhar

File to RFC Scenario - Not working with AAE

I have a File to RFC Scenario (calling RFC /POSDW/CREATE_TRANSACTIONS_EXT) using AAE but it is failing with following error in PI .
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
But When I run the same scenario using IE instead of AAE, it is successful from PI. So probably there is nothing wrong in RFC channel configuration.
There's an OSS note-730870 on this error ,it says the XML document sent to RFC Adapter may not be RFC-XML but as I am using AAE, payload generated after technical routing cannot be viewed.
Could you all please suggest why this error is coming and solution for the same?
Thanks,
Ankit

Hi Debashish,Monica,
Thanks for your help, I checked this SAP note its question 16 do describe my problem but do not provide solution and as I am using AAE it does not allows me to see the target structure generated whereas if I use IE the target structure generated is sucessfully getting posted.
Also, the functional module is present in target system. I have reimported the RFC also.
Is there some AAE related configuration required to enable AAE with RFC which could be missing?
This is what I get in log as the RFC reciever is called..
06.09.2011 14:15:31 Information MP: entering1
06.09.2011 14:15:31 Information MP: processing local module localejbs/RfcAFBean
06.09.2011 14:15:31 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
Thanks,
Ankit

Ipad i have load swf file but swf is not working proper(flex 4.6) but android is fine to work how

ipad i have load swf file but swf is not working proper(flex 4.6) but android is fine to work how

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

File type associations is not working in the App-V 4.6 SP3

Hello,
I found issue, that file type associations is not working in App-V 4.6 SP3. When I try to open associated file with double click I receive next window:
Translate: This action is only valid for products that are currently installed.
I have checked associations in App-V Console and in OSD file, everything looks like OK.
Maybe someone has some ideas?
Could you please share them with me?
Thank you in advance.

Is this only happening on one client machine? If so can you completely clear the application and re-stream\cache it again?
If that fails, you could try to create the FTA locally on the client
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

File to Rfc scenario,not updated in rfc

Hi,
File to RFC scenario,not updated in RFC?
i checked communication channels ,smq1,smq2,sm58,cache refresh.but issue was not solved.
Please advise where need to check?
Thanks
Amita

Hi Amita,
First check whether the configuration between PI and ECC has been set up properly.
Are you using a stand RFC or custom RFC?
Import the RFC metadata from ECC to PI and use that structure in your service interface and configure the remaining objects that we normally do.
Now, try to process the file and check in the communication channel, whether file Adapter is able to pick up and send the message to PI system.
If the message is successfully processed through PI system then check the messages in Queues. Also, check the RFC communication channel in the adapter engine.
Follow the process, you might get some clue regarding the issue.

File to db scenario not getting out put

In file to db scenario not getting output(mysql db). giving error for receiver dat there is no action attribute in xml docment..
what could be da reason??

The XML document must have the following schema in this case:
<root>
<StatementName1>
<dbTableName action=UPDATE | UPDATE_INSERT>
<table>realDbTableName</table>
<access>
<col1>val1</col1>
<col2>val2new</col2>
</access>
<key1>
<col2>val2old</col2>
<col4>val4</col4>
</key1>
<key2>
<col2>val2old2</col2>
</key2>
</dbTableName>
</StatementName1>

HT1338 Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process (Finder) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

I am trying to change the date on an imported home video clip. I entered 9/7/2012 and got 6/9/0339! I checked modify original file, but it is not working. Any ideas?

I am trying to change the date on an imported home video clip. I entered 9/7/2012 and got 6/9/0339! I checked modify original file, but it is not working. Any ideas?

Are you using the Adjust Date and Time option or the Batch Change option? If it's the former try the latter. If you get the same results launch iPhoto with the Option key held down and create a new, test library. Import the same video file and check to see if the same problem persists.
OT

I have mp4 videos on my computer that I want to add to itunes...the add a file or folder is not working. Why?

I have mp4 videos on my computer that I want to add to itunes...the add a file or folder is not working. Why?

wait until, Apple fixes it

I downloaded the latest firefox 4 and updated my file, firefox 4 will not work with my version of Mac OS X, how do I get my old firefox back?

I downloaded the latest firefox 4 and updated my file, firefox 4 will not work with my version of Mac OS X, how do I get my old firefox back?

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Added preset motions to my interactive pdf file. It's not working when I export my file as an inter

I added preset motions to my interactive pdf file. It's not working when I export my file as an interactive pdf. It's working when I play it on the Preview panel. I must not be doing something right. Does anybody have any clue what I need to do to have my presets motions work when played on Acrobat

So do you mean export the whole document in a swf file format and then bring the whole swf file in and save it as a pdf file. Is there way to export these motion presets seperately and bring them back into Indesign. I wish it was less difficult but I guess there is no way around it for the time being.

PI Sender File Adapter OS Commands not working

Hi Guys,
I have very simple scenario. we are using PI 7.1 with EHP1 on HP hardware with JDK 1.5.2*.
We are processing XML files through Sender File Adapter(NFS) to Idocs. We also need to move some pdf documents to target folders on the same box (basically Sender and Receiver files/foders are mounted to PI OS hence I am using NFS)
I am trying to put a simple OS command copy and mov command.
in the Before Message Processing: cp /tmp/*.pdf /tmp/out/
And in the After Message Processing: mv /tmp/*.pdf /tmp/archive/
In the Adapter Audit logs says these commands are executed but I don't see any effect and there is no error/Traces available even in the Server logs also.
I have been using these OS commands since XI 3.0 I never had any issue.
I have gone through SDN but no luck, Please share your experiences.
Thanks,
Laxman
Edited by: Laxman Molugu on Feb 3, 2010 11:58 AM
Edited by: Laxman Molugu on Feb 3, 2010 11:59 AM

hi ,
As i understand your requirement you just want to take the pdf file from one folder of XI server and put it to another..
for this u do not need a OS command..
This requirement is simple ..infact u do not need any IR components as well..
u just have to develop the ID part and wherever it asks for namespace or message interface u can give a dummy one..
this would jst take the pdf file from one folder and send it to another

Help with util.zip up files... does not work

I am writing a program so my mum can zip up new photos she takes and then send them to me. The program creates a html file for the webpage plus a smaller version of her original photo and places them all in a 1 folder with a new name. Al this part works... I want to afterwards place my files in a zipped up folder that she can e-mail me with her normal client. How... I picked up this code on the net and have changed it to incoporate my parameters. The files which are created ..paths are (String in an String[]) I then send to my zipping method.
The zip file is created but does not work when I try to extract from it ??? I also know that the String [] works becuse I have made a loop to check its properties at each index.
what am I doing wrong?
This is a modified code I found on the internet but with no author??
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.zip.ZipEntry;
import java.util.zip.*;
public class Test{
    private File zipDir;
    private String[] filename;
    public Test(String[] recivedFilename){
        filename = recivedFilename;
        try {
            ZipOutputStream zos = new
                    ZipOutputStream(new FileOutputStream("c:\\curDir.zip"));
            from,
            zipDir("c:\\batviapictures\\", zos);
            zos.close();
        } catch(Exception e) {
            //handle exception
    public void zipDir(String dir2zip, ZipOutputStream zos) {
        try {File
            zipDir = new File(dir2zip);
            String[] dirList = filename;
            byte[] readBuffer = new byte[2156];
            int bytesIn = 0;
            //loop through dirList, and zip the files
            for(int i=0; i<dirList.length; i++) {
                File f = new File(zipDir, dirList);
if(f.isDirectory()) {
String filePath = f.getPath();
zipDir(filePath, zos);
continue;
FileInputStream fis = new FileInputStream(f);
ZipEntry anEntry = new ZipEntry(f.getPath());
zos.putNextEntry(anEntry);
while((bytesIn = fis.read(readBuffer)) != -1) {
zos.write(readBuffer, 0, bytesIn);
fis.close();
catch(Exception e) {

I make no guarantees that this will completely solve all your problems, but I just know these calls are needed but missing from your OP:
try {
    ZipOutputStream zos = new
                    ZipOutputStream(new FileOutputStream("c:\\curDir.zip"));
                    from,
                    zipDir("c:\\batviapictures\\", zos);
    zos.flush(); // ADD THIS after all files have been written to the zos
    zos.close();
} catch(Exception e) {
    //handle exception
}And
while((bytesIn = fis.read(readBuffer)) != -1) {
    zos.write(readBuffer, 0, bytesIn);
zos.closeEntry(); // ADD THIS after each file is written to the zos
fis.close();

File copy in KM not working from a par file.

Hi Experts,
                  We created a par file which will copy a file from a folder and copy this onto a seperate folder under the same parent folder. This applications works well on testing system, but is not working when deployed to the portal server where it supposed to work.
Please give your thoughts and your valuable suggestions on this issue.
Thanks in advace
Sateesh

Hi Raghu,
               What is CM system and where it needs to be added.
I am copying the code please check and give your valuable inputs.
import java.util.Properties;
import com.sap.tc.logging.FileLog;
import com.sap.tc.logging.Severity;
import com.sap.tc.logging.TraceFormatter;
import com.sapportals.wcm.repository.CopyParameter;
import com.sapportals.wcm.repository.ICollection;
import com.sapportals.wcm.repository.ICopyParameter;
import com.sapportals.wcm.repository.IResourceList;
import com.sapportals.wcm.repository.ResourceContext;
import com.sapportals.wcm.repository.ResourceFactory;
import com.sapportals.wcm.service.scheduler.ISchedulerTask;
import com.sapportals.wcm.util.uri.RID;
import com.sapportals.wcm.util.usermanagement.WPUMFactory;
public class archiveContent implements ISchedulerTask {
     private static final com.sap.tc.logging.Location logger =
          com.sap.tc.logging.Location.getLocation("KMScheduler");
public void run( String id, Properties properties ) {
     // implement the tasks to be scheduled
     logger.setEffectiveSeverity(Severity.ALL);
     FileLog mFile1 = new FileLog("/usr/sap/EPD/JC00/j2ee/cluster/server0/log/KMScheduler/reportArchiver.log",10485760,5,new TraceFormatter("%d %m"));
     logger.addLog(mFile1);
     String Filename=null;
     int flag=0;
     logger.infoT("Entering Archive Application try block");
     try{
     com.sapportals.portal.security.usermanagement.IUser epUser = WPUMFactory.getServiceUserFactory().getServiceUser("cmadmin_service");
     ResourceContext ctx = new ResourceContext(epUser);
//     Get the path of the bi-broadcast (start) folder and create a resource
     //RID birid = RID.getRID("/bi-broadcast");
     RID birid = RID.getRID("/documents/KMScheduler_test");
//     Create resource holding the contents of the bi-broadcast/top level folder
     com.sapportals.wcm.repository.IResource bires= ResourceFactory.getInstance().getResource(birid,ctx);
     if(bires!=null)
//          Create a collection of the bi-broadcast resource and get the child resources i.e. Categories
          ICollection categorycollection=(ICollection)bires;
          IResourceList categorylst= categorycollection.getChildren();
          com.sapportals.wcm.repository.IResource categoryres = null;
          if(categorylst!=null)
               for(int i=0;i<categorylst.size();i++)
                    categoryres = categorylst.get(i);
//                    Check if the Category is Template. if it is do not enter the loop
                    //if(!categoryres.getName().equalsIgnoreCase("Template"))
//                         Get the path of the Category folder
                         //RID categoryrid = RID.getRID("/bi-broadcast/"+categoryres.getName());
                         //RID categoryrid = RID.getRID("/documents/KMScheduler_test/bi_reports/"+categoryres.getName());
                         //logger.infoT("Folder ""\"/documents/KMScheduler_test/bi_reports/"categoryres.getName()+"\" detected");
                         if(categoryres!=null)
//                              Create a collection of the Category resource and get the child resources i.e. Area
                              ICollection areacollection=(ICollection)categoryres;
                              IResourceList arealst= areacollection.getChildren();
                              com.sapportals.wcm.repository.IResource areares = null;
                              if(arealst!=null)
                                   for(int j=0;j<arealst.size();j++)
                                        areares=arealst.get(j);
                                        Filename=areares.getName();
//                                        Get the path of the Area folder
                                        RID arearid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"+areares.getName());
                                        logger.infoT("Folder ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()+"\" detected");
                                        if(areares!=null)
//                                             Create a collection of the Area resource and get the child resources i.e. Region
                                             ICollection regioncollection=(ICollection)areares;
                                             IResourceList regionlst= regioncollection.getChildren();
                                             com.sapportals.wcm.repository.IResource regionres = null;
                                             if(regionlst!=null)
                                                  for(int k=0;k<regionlst.size();k++)
                                                       regionres=regionlst.get(k);
                                                       Filename=regionres.getName();
//                                                       Get the path of the Region folder
                                                       RID regionrid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"+regionres.getName());
                                                       logger.infoT("Folder ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()+"\" detected");
                                                       if(regionres!=null)
//                                                       Create a collection of the Region resource and get the child resources i.e. File
                                                            ICollection filecollection=(ICollection)regionres;
                                                            IResourceList filelst= filecollection.getChildren();
                                                            com.sapportals.wcm.repository.IResource fileres = null;
                                                            if(filelst!=null)
                                                                 for(int l=0;l<filelst.size();l++)
                                                                      fileres=filelst.get(l);
//                                                                      Check if the file is Archive or Special. if it is don not move it to Archive
                                                                      if(!fileres.getName().equalsIgnoreCase("Archive"))
                                                                           if(!fileres.getName().equalsIgnoreCase("Special"))
                                                                                flag=1;
//                                                                                Get the path of the File in the region folder
                                                                                RID filerid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Archive/"+fileres.getName());
                                                                                logger.infoT("File ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Archive/"fileres.getName()+"\" detected");
//                                                                                Move one child at a time to the Archive folder
                                                                                ICopyParameter cp=new CopyParameter(true);
                                                                                fileres.move(filerid,cp);
                                                                                logger.infoT("Archiving file \""fileres.getName()" from folder /documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"\"");
                                                                           else if(fileres.getName().equalsIgnoreCase("Special"))
                                                                                RID ar_analysisrid=RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special");
                                                                                ICollection aranaylsiscollection=(ICollection)fileres;
                                                                                IResourceList aranalysislst= aranaylsiscollection.getChildren();
                                                                                com.sapportals.wcm.repository.IResource aranalysisres = null;
                                                                                if(aranalysislst!=null)
                                                                                     for(int m=0;m<aranalysislst.size();m++)
                                                                                          aranalysisres=aranalysislst.get(m);
                                                                                          if(!aranalysisres.getName().equalsIgnoreCase("Archive"))
                                                                                                    flag=1;
//                                                                                                    Get the path of the File in the region folder
                                                                                                    RID arfilerid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special/Archive/"+aranalysisres.getName());
                                                                                                    logger.infoT("File ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special/Archive/"aranalysisres.getName()+"\" detected in Special folder");
//                                                                                                    Move one child at a time to the Archive folder
                                                                                                    ICopyParameter cp=new CopyParameter(true);
                                                                                                    aranalysisres.move(arfilerid,cp);
                                                                                                    logger.infoT("Archiving file \""fileres.getName()" from folder /documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special/Archive/"aranalysisres.getName()"\"");
Edited by: Jabi123 on Jan 17, 2011 7:13 AM

PrevFrame() buttons in a swf file inserted in html not working in Firefox

Hi!
I have a very weird problem.
I have created a photo gallery using AS3 in Flash CS5. I have used prevFrame() and nextFrame() actions for "previous photo" and "next photo" buttons as well as for "previous thumbnails" and "next thumbnails" buttons.
All the buttons work fine when i run the swf files as well as when i run the swf files in Firefox 8.0 and IE9. However, once I insert this swf file into my html file using Dreamweaver CS5->Insert->Media->swf, the "previous" buttons dont work in Firefox 8.0! the previous image button works sometimes whereas the previous thumbnails button does not work at all! They work fine in IE9. The next buttons also work fine in every browser. Heres my code:
stop();
thumbprev_btn.visible=false;
next_btn.addEventListener(MouseEvent.CLICK, nextimage);
prev_btn.addEventListener(MouseEvent.CLICK, previmage);
thumbprev_btn.addEventListener(MouseEvent.CLICK, prevthumbs);
thumbnext_btn.addEventListener(MouseEvent.CLICK, nextthumbs);
function nextimage(event:MouseEvent):void
if(mc_content.currentFrame==mc_content.totalFrames)
mc_content.gotoAndStop(1);
else
mc_content.nextFrame();
function previmage(event:MouseEvent):void
if(mc_content.currentFrame==1)
mc_content.gotoAndStop(mc_content.totalFrames);
else
mc_content.prevFrame();
function nextthumbs(event:MouseEvent):void
thumbprev_btn.visible=true;
nextFrame();
if(currentFrame==3)
thumbnext_btn.visible=false;
function prevthumbs(event:MouseEvent):void
thumbnext_btn.visible=true;
prevFrame();
if(currentFrame==1)
thumbprev_btn.visible=false;
Please help.

Thankyou Ned. The html file published by flash worked perfectly however the problem persisted even if i used this html file's code. But strangely, the problem disappeared after a few days! Now the original dreamweaver code is also working fine.

Simple File to File scenario not working

Similar Messages

Maybe you are looking for