SImple Flash question

Ok ,
I know that i must be overlooking someting so simple that I
can grasp it...
I have a mc that has an on press function. What I want to
happen is when the user clicks on the mc that is opens up and plays
another swf in a new browser window...
I am also using this code on another mc and it works fine
because it is referring to a url and not a swf file. What has
changed in actionscript 3 that I am overlooking....
here is my code:
ttTXT_mc.onRelease = function()
gerURL("Tradition.swf",_blank);
This code work when you use this code:
ttTXT_mc.onRelease=function()
gerURL("
http://www.adobe.com",_blank);
The other swf file is in the same folder as the main swf
file...
any thoughts!
thannks
Aaron

I have also tired that it seems not to work either.... I
turned off my pop-up blocker so it would not block the new window
from opening could ther be something else that I am over looking

Similar Messages

4 Simple Flash Questions that Are Stumping Me!

What is the Frame Rate for Web Animations
Q1. I am making an animation which will be played on the web. What is the default frame rate (fps) of Flash CS5? And what is the frame rate of for web?
Q2. My animation needs to be 30 seconds long. So at 15 fps that would mean I need to use 600 frames in Flash?
How Do I Mask everything so all I see is the Content on the Stage?
I have a wide image that extends past my movies stage size so when I preview my movie the image is visible. How do I mask out anything that extends past my movies window size? I believe I can create a layer named "mask" and place it above all other layers, but I forget how to make the mask. Any help is appreciated.
How to Fade a Graphic
I have a graphic element (some type) and I want it to fade from 0% to 100%. In older versions of Flash I could just select the symbol and then set it's alpha value to 0%, move a few keyframes and then set the alpha to 100%. Voila! but now it doesn't seem to work that way. How can I do this in CS5?

Ned, it says 24 fps which means there is 24 frames per second so each 24 frames is 1 second.
Date: Fri, 4 Nov 2011 05:35:16 -0600
From: [email protected]
To: [email protected]
Subject: 4 Simple Flash Questions that Are Stumping Me!
    Re: 4 Simple Flash Questions that Are Stumping Me!
    created by Ned Murphy in Flash Pro - General - View the full discussion
1 You can create your character as a movieclip and copy/paste that movieclip from one file to another. 2. One way to create a movieclip is to copy all the frame of the animation's timeline (select them all, right click the selection, choose Copy Frames), then create a new movieclip symbol (Insert -> New Symbol...etc) right click on its only keyframe and chhose Paste Frames. THat will put all the layers and frames you copied into the movieclip The only way to come close to being certain about the timing of you animation is to use code to keep track of the time, something like getTimer().. The frame rate that a file plays at is not a reliable means of dictating the time it takes due to a variety of factors which include the amount of content you are trying to process and performance limits of the user's machine.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4007420#4007420
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4007420#4007420. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Flashing Question Mark Folder Everything I Am Trying is Not Working!

A few days ago my iMac gave me the "pinwheel of death" so I cold shutdown and rebooted. I heard the chime and then I got this flashing folder with a question mark on it. I quickly jumped on my Macbook pro and researched what it meant. I tried booting while holding the option key and would get a blank white screen with a mouse pointer and nothing else. I tried resetting my PRAM and still nothing! Then I saw someone say to restart my iMac while holding down R to start into disk utility. It worked! I went through the repair disk process and it said there was nothing to repair. I then repaired disk permissions, and bingo it had to repair a few different things that needed to be repaired. Once the repair process finished I rebooted to my main drive and everything worked fine. That night I shutdown my computer and the next morning I got the flashing folder again. This time however, after shutting down and rebooting everything worked fine. Now today my iMac froze and I cold shutdown and rebooted. I got the flashing folder and question mark again. This time nothing is responding. I tried rebooting while holding the option key, tried booting into disk utility and still nothing. The only thing that the iMac will recognize is when I reboot while holding the 'option' key and put in the Mac OS X Lion install disc It lets me click that disc and it starts the install cycle... I really don't want to do this as it would wipe everything on the drive and I do not have a lot of documents backed up. What do I do? Am I screwed? Help would be greatly appreciated!
Thanks much!

I think the HD has crashed. Run Apple Hardware Test in Extended Mode at least 3x back to back. If it reports errors, next step is your local Apple Store or AASP. Also carefully read and apply Apple's advice in Flashing question mark appears when you start your Mac. If you had been backing up it would have been a simple matter of replacing the HD, restoring from the backup and you're back up and running. Considering you said you don't back up you're about to learn a very painful lesson on why backing up isn't something you should do it's something you MUST do.
Good luck and sorry for the bad news.

IMac DV SE 400 chimes, gives flashing question mark. Hard drive bad?

My G3 iMac DV SE 400 will not start up. This is what happens:
1. Startup chime
2. Hard drive starts to spin
3. Hard drive "clicks" once
4. Flashing question mark on screen
I tried resetting the PRAM and disconnecting everything like it says in the manual. I have booted up from CD and used Disk Utility (OS X) and Disk First Aid (OS 9) to find out if the computer "sees" the hard drive. No luck with either one - the drive does not mount. I have also tried System Profiler and the computer does not recognize the presence of any hard drive there either.
Is the hard drive really "dead?" Can it be resurrected - at least to the point where I can retrieve my files, pictures, etc.? I'm confident that the drive is receiving power because it actually starts to spin up (see #2 above). Am I overlooking something easy here? Could it be as simple as replacing the battery? I haven't tried that because the hard drive does "attempt" to start up.
Failing all else, is it possible to retrieve the data using my other Mac even though the hard drive will not boot?
Any help would be appreciated. Thanks.

Well if it spins up you might be able to salvage your data with Data Rescue II (free demo) or Disk Warrior. You could also try Target mode but if disk utility didn't see it then that's probably not going to be any better.
If those two don't see it then your only option is data retrieval via a pro company but that will be very expensive.
Richard

I got this flashing question mark, i did some research into this and found out that the hard drive is the cause

i recently found my ibook and decided to see if it would still turn on. it did but i got this flashing question mark, i did some research into this and found out that the hard drive is the cause. so i opened it up replaced the hard drive and closed it up, booted from the disc and crossed my fingers but it did not pick up the hard drive. i thought it might not have been installed properly, so i opened it up to check the connections to make shure they were secure and closed it back up but now it wont even boot from the disc. so dose anyone know whats wrong with it because i really don't just want throw it away if its a simple fix. please if anyone know i would greatly appreciate it.
<Re-Titled By Host>

There often were more than one build of Apple computer per model number designation...
In the instance of iBook (white dualUSB) there appear to be two with number A-1007.
And both of these were 14-inch display models.
•iBook G3/800 14-Inch (32 VRAM - Tr) 800 MHz PowerPC 750fx (G3)
•iBook G3/900 14-Inch (Early 2003 - Op) 900 MHz PowerPC 750fx (G3)
•Apple iBook Specs (All iBook Technical Specs) for entire series - everymac:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
There are a few fairly good repair guides online, some on http://iFixit.com site.
Here's the link to the early iBook G3 series, includes color + white dualUSB.
If your iBook is a 14-inch G3 white dualUSB model that one is there, too:
•iBook G3 Repair guides - iFixit:
https://www.ifixit.com/Device/iBook_G3
Either of these may be able to run a system no later than OS X Tiger 10.4.11.
So a system install disc set could be used to troubleshoot, install, restore &
prepare a replacement hard drive for a new system.
Not certain what the issues are behind your situation, there may be more than
meets the eye. Some models of iBook were more prone to hardware problems
and as they age, fewer opportunities to affordably repair them exist.
Good luck in resolving the iBook G3 issues...!

How do I fix the GRAY boot-up screen with FLASHING QUESTION-mark FOLDER?

When I turn on the MacBook Pro laptop, I opened up the Safari Browser and its when the problem started. It was stuck on an loading infinite loop. I decided to force quit the application and/or turn off the mac by the Menu options, It did not work. So I did a "Hard" Shut-down and restarted the Mac, the Boot up screen stood gray for like a minute until the Flashing ? Folder icon showed up!.
My sister's laptop's warranty is expired so I wonder how can I fix it without having to spend too much money on a simple troubleshooting tip.
How can I download/create a boot-up Disk/Flash Drive so I can reset it to factory settings?
I cannot access the laptop because It's kind-of software bricked if you ask me. Also, I do not know how to check the Mac OS version outside of the "About Mac" menu. I do have another Mac which is a desktop computer with a CD drive.
I would appreciate some expertise on this issue a.s.a.p. Thank you!

Ok, now I am stuck:
Why does my Mac boot its OS from the Flash Drive instead of the INTERNAL HARD DRIVE???a
If I start up my MacBook Pro, It will have the flashing question mark folder UNLESS i plug in the OS-Boot flash drive. When I at the desktop screen and work on a program, When I unplug the Flash drive, THE OS WILL CRASH AS IF I TOOK it's soul (OS x Lion) out of the body (MacBook Pro Laptop)
this is frustrating because when I did the INTERNET RECOVERY, When I install OS x Lion, the Flash Drive only show up as an option as opposed to the HDD.
I cannot format the hard-drive in DISK UTILITY because it's grayed out. This is just frustating. I never had problems with PC Windows OS recovery but this (Mac OS).

Macbook has the folder with flashing question mark

Yesterday as I was watching Netflix my Mac froze. I was skipping around an episode and then started opening a folder to do something else while it loaded and then it just froze. I thought maybe I was clicking on too many things at once or whatever and it got screwed up a bit so I closed it for a minute or two. When I opened it back up it had a (light) blue screen that wouldn't go away so I shut it down with the power button. Then when I turned it back it just had a white/gray screen for like a minute before the folder with the flashing question marked appeared.
I've googled possible solutions but nothing seems to work. It won't boot up in safemode. One answer suggested trying to do comm-opt-P-R (can't remember what that was trying to do) and that didn't work. The screen would just go black and then start up over and over. When I just press the opt-key it takes me straight to Internet recovery. However, none of the options available work. I don't have the TimeMachine thing, I don't have a disk to reload the Lion software, and there's nothing to click on at all in the disk utility. All that's available in that is a disk0 and the Mac OS X Base System and I can't click on First Aid/Erase/Partition/Restore. I've opened up the startup disk and there's nothing that shows up.
Is there something else I can try at home or should I just go ahead to the apple store? My Mac is under a year old still, but I spilled soda on it back in like October and had to get all the parts replaced so I don't know if that would do anything to the warranty....And if something does have to get replaced will I lose all my stuff? It was bad enough losing four months worth of data, I don't want to lose seven.
Thanks for any help.

As long as the parts were replaced by someone authorized to do the repairs, you should still be fine. This error indicates that they computer isn't able to find a disk to boot to.
The "disk" to reload Lion is that internet recovery (also can be launched from command + r).
Seeing as how you don't have the startupdisk in Disk Utility, I would recommend getting it into a store to see why that drive isn't detected. It could be something as simple as a loose SATA cable, or as catastrophic as complete hard drive failure. While you're at the store, I'd look into investing in an external drive to start running Time Machine...

FTP Flash Question

Aloha,
I am a teacher and would like to put the simple Flash video games for my little 1st graders on our HTML5 website. I have uploaded the following files thru filezilla
1. swfobject.js
2. teahousefla.html
3. teahouselfa.swf
When I go to the site it is simply showing the "ugly website" and not the flash game. Do I need to FTP the .fla?
Thank you very much for helping me with this newbie question! Smiles, Victoria

No to the iPhone question.
Flash built the swfobject.js, the html, and the .swf files. Do I need to do something special inside Dreamweaver? I simply saved the files Flash built and that is what I tried to FTP. The name of the website is morpheusflash.com
Thank you very much for helping! Very much appreciated!

Affichage des fichiers jpeg dans un site full Flash (question corrigée)

Bonjour,
Dans un site full Flash qui représente une galerie photos avec des menus simples comment peut-on garantir que des fichiers jpeg ne soient déformées (+ grands en taille) par les navigateurs ?
Comment peut-on garantir, quoiqu'il arrive, le respect des proportions pré définies ?
Comment peut-on empêcher qu'un écran de 19" au format 4/3 affiche des fichiers jpeg dans une taille qui n'est pas la taille d'origine.
Merci d'avance pour la réponse ou les suggestions.
Affichage des fichiers jpeg dans un site full Flash (question corrigée)

Bonjour,
un bon outil pour évaluer la façon dont la taille «arrive» aux des divers observateurs, est cette page: http://browsersize.googlelabs.com/ ("Enter URL here" > veut dire «URL insérer ici»).
Hans-G.

Where can I buy the code or buy the book to make a simple flash game?

I need to make or buy a template for a simple flash game for a clients website. It has to be legit to buy. It is about 5 pages long. You are asked a question, you select a radio button for the answer to the question, it compiles all your answers and gives you a result.
I know flash pretty well but ccording to budget and time.it is best not to have to experiment.
Let me know, I appreciate the imput!

http://activeden.net/searches?term=quiz&type=files

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033)

My MBP (mid 09)/ folder with a flashing question mark.

My MBP (mid 09) is showing a folder with a flashing question mark. I tried the usual things like PRAM Reset and booting with a external drive. I also changed the hard drive and could use it as a external drive on an other Mac - so this seems to work. Another drive could not be used too. The Apple Hardware Test does not work - my Superdrive is broken. Any ideas?

https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Macbook Air won't startup, flashing question mark

Hello everyone, here's the problem:
Recently (Sep) I've bought a new macbook air (2012, 128gb SSD). After a few months of using it the following problem happened: while surfing on the web, my macbook hang up (I couldn't press anything or do anything, the system wouldn't respond), so I shut it down forcefully (by holding the power button), after this my computer wouldn't boot at all: a flashing questioning mark appeared on the grey screen. I know what it means (I'm an Intel engineer and know quite a bit on the subject), so I thought the SSD was dead. Brought it to the shop a bought it at (M-video, Russia, Nizhni Novgorod). After 21 day (sic!) they gave it back to me working fine and said that when they opened it - it worked OK, they tested it for 5 days with reboots and it was OK. After 1 month of using it after I got it back (today) it happened again: the OSx hang -> force shutdown -> question mark on startup.
Could you please tell what can it be? It's obvious that it's no a hardware problem (in this case it wouldn't happen from time to time but be a permanent defect after the first time it occurred). I tried all the recipes found on the internet (command + alt + P + R; R to get recovery mode - disk utility sees only 1 partition on disk0 of 1.8 GB (I guess it's partition with the base system) and won't let me do anything - all options are grayed out; SHIFT won't let me into safe mode - no idea why; etc.). I also don't have a CD or anything with the mac OS, however even Internet recovery won't help - no targets to install it when it comes to it.
Have tried almost anything and asked almost anyone among my IT-connected friends, but in vain. Thank you in advance for your help! Will appreciate any piece of advice.

Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
If this fails then see: OS X (Lion/Mountain Lion)- About OS X Recovery.

Black Screen, Grey Screen, then flashing question mark, now frozen....

hi everyone,
i know i have probably the most common problem - and i've tried to read all about the logic board problems which i'm fairly certain i have.
I realize i will most likely have to buy a new macbook - but before i do - i need to retrieve files that are on my ibook g3 (bought in early 2003).
This is what has happened in the past 2 days:
1. I can hear the power start up (and chimes) but screen is completely black.
2. Tried resetting PRAM and PMU, now blank grey screen sometimes appears.
3. Now, grey screen with flashing question mark in the middle alternating with mac face. So i assumed this meant it couldn't locate my hard drive. So i found my ibook install disc and inserted it and restarted while holding down "C" key.
4. Grey screen - with Apple (thought this was success) - then it turned to a large grey circle with a line through it (a slash). And then suddenly frozen.
Since then it has just been a lot of lines through the screen alternating with completely grey screen, etc. along with any of the above-mentioned outcomes. I tried pushing on the lower-left-hand corner of the computer and yes, it affects the display - more or less lines, etc.
How can i get my old files off of it? Do i buy a new macbook and connect them via fire wire cable and try that way? or will that not work if the above is happening? Or is it possible for someone (myself or perhaps IT professionals) to remove the hard drive from my old ibook and place it somewhere where i can copy over the files?
Any help is appreciated - i know this is a popular topic - i've just had so many weird outcomes in the past 2 days i'm not exactly sure which solution (if any) would work for me right now.
Thanks so much!

Hi Ronda -
I do have access to another mac (mini) with firewire at my work. Or I might go out and buy a new macbook this weekend as well (preferable since I don't really want my personal files on my work computer, etc.) But yes, i need to get my old files off of this one.
I have never added additional memory or anything to it really since I got it. So it should be the original specs:
iBook (14.1 LCD 900 MHz 32 VRAM)
256MB memory
Combo (DVD-ROM/CD-RW)
Hard drive: 40GB
Not a lot of space was remaining if i recall. I did get the 'disk full' notice a few weeks ago, but i did end up deleting a lot of stuff. Needless to say, i'm sure it was quite full, but not at maximum when this happened.
Update: Last night i tried to start it up again, and it would ONLY go to a black screen this time (ie. no display at all). What do you think i should do?

Flashing Question Mark & Sad Apple Logo

I had my Mac for quite some time and everything seem to be going well until yesterday, when I pressed the power key all it showed was a white screen and the apple logo, I had called Tech and they said i was out of warrenty, but informed me that it would best to load the Mac OS X cd when I loaded and reached the select a destination part I saw my hard drive with an explanation point. she stated this was bad and that i would need to compeltely whipe the hard drive which didnt bother me. I went to Disk Utilities and chose my hards drive clicked options and choose to zero all data, also clicked download OS 9 drives. After waiting for about an hr it was completed, and i gave it a volume and went on with the installation i choose the volume and all seemed well. yet, after the computer rebooted and all i saw was a Flashing Question Mark & Sad Apple Logo. not quite sure what this means but checked other threads and followed some of the advised given to repair this, yet for me it doesn't work, as of now i tried erasing all data again but now it seems i can't set a volume. Not 100% percent sure which OS cd i have i will double check and reply later, I have a powerbook G4. any help would be great.
Mac OS X (10.4.2)

Hi Richard,
I was hoping you'd respond Thanks to the link to S.M.A.R.T reporter, but things have deteriorated since my last post and now it won't boot up at all.
I hit the power button, hear the start-up chime, then nothing but eerie silence and a gray screen.
The lack of noise usually created by a HD spinning up should be obvious that this is indeed a hard drive issue, but I want to make sure I can sound intelligent when throw myself at the guy who replaced the drive.
I tried booting from a 10.3 install cd (holding down 'c' at startup) to run Disc Utility but it won't even do that. I can hear the cd-rom spinning, reading the disc, but after a while it just gives up. In fact, I think if I listen hard enough, I can hear the faintest sound of mocking laughter....
Is this painfully, obviously, a hard drive gone bad?
It's not the end of the world, just very aggravating.

SImple Flash question

Similar Messages

Maybe you are looking for