Simple h323 with CCM question
I am attempting to set up the following:
I have a POTS line plugged into FXO port 0/1/3.
I want that POTS line to ring extension 89047 on CCM.
I know this is simple, but I must be missing something. Here is what I have on config:
dial-peer voice 33 pots
description Line_3
direct-inward dial
progress_ind setup enable 3
progress_ind alert enable 8
forward digits all
port 0/1/3
dial-peer voice 999992 voip
preference 1
destination-pattern 890..
progress_ind setup enable 3
session target ipv4:10.10.1.50 (CCM ADDRESS)
incoming called-number .
dtmf-relay h245-alphanumeric
codec g711ulaw
ip qos dscp cs5 media
no vad
Sorry I did not include that in original. I do have the PLAR statement. I can do a debug on the dialpeer, and it is hitting the proper dialpeer and trying to dial 89047, but I get fast busy. 89047 is a Hunt Pilot in CCM.
Thanks
Similar Messages
-
my computer has some serious problems, my iphoto only shows only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.
Details please
What version of iPhoto and of the OS?
i tried to rebuild my files from folders that had the pics in them.
Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
my iphoto only shows only shows thumb size pics when I try to open them,
where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
originally all the photos had a large delta with a question mark.
Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
also I can't back up the library file because its not there.
This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here -- http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US -- and -- http://pondini.org/TM/FAQ.html ---
I also lost my Idvd file, only have broken chain showing.
This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
LN -
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as a Mac Newbie/Novice, I successfully installed a new hard drive and the OS (10.6.8) software from my installation discs. I have, however, lost the ability to play video using the spacebar and I have no idea on the steps necessary to correct this seemingly simple technical blip. .Here's my system overview:Model Name: MacBook Pro Model Identifier: MacBookPro6,2 Processor Name: Intel Core i5 Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 3 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s.
I am using the Premiere Pro CS5 NLE (with the 5.0.4 updates), and I have tried to reinstall the software (which is actually the Production Premium package) several times, but I still cannot use the spacebar (or any method) to play any of my imported videos.
PLEASE HELP in any way you can!
Prior to having to replace my hard drive, my software was working just fine. No problems at all. But now, it seems that I can't get it to play whatever type of file I import.
Again, I am a newbie to the Mac, so any and all correctional/repair assistance needs to be expalined as if I were a child : )
I would hate to try to revert to considering the sophmoric Final Cut Pro X editing software package, but I've got to do something to be able to get back to my editing activities.
zionhall
[email protected]Jorge242 wrote:
@FatMac the internet recovery doesnt work. It goes into recovery mode and then when i try to reinstall it cant find a disk to install it to. So what would be a good choice to take now?
Recovery Mode presents you with, among other things, Disk Utility. When you open that, if the internal shows up at all, first try to "Repair DIsk." If that doesn't work but if the "Media" line is present, try to format and partition it with a GUID partition table (understand that you will be erasing the contents of your internal). Then try to reinstall the OS. If that doesn't work, and since your Retina MBP didn't come with a DVD drive or DVDs, you'll need to try a hardware test using these instructions from Apple (short version: shut down, press the power button and hold down the "D" key). If none of those things work, let's hope you either have AppleCare or your warranty has some life left because the SSD in your rMBP is proprietary and expensive. You'll need to bring it to an Apple Genius for evaluation. -
Impossible To Reach Anyone By E-mail or Telephone With A Question .
I was going to purchase the Zen Vision M 30 GB MP3 Player until I realized just how difficult it was to get through to these people with a simple question such as "How much is a replacement battery for the Zen M and what is the item number so this can be bought. There was no possible way to email them with this question unless you already purchased a model of some sort, and no -800 number to speak of. If it's this difficult to find out about a battery, what is it like when you need to reach customer service about a problem if by some chance you have one. I'm a little turned off with how customer service avoids answering the question one on one, but they would rather give you trouble shooting ste
ps.
I'm very turned off by this and was wondering if anyone had the same problems before I throw 300.00 away on a Zen M MP3 player. Donny
PS they don't even have a replacement battery listed for this Item and yet they sell the MP3 players themselves. Doesn't make any sense to me.I must add though that it is still nigh-on impossible to get hold of anybody if you do have a problem - you can only phone them if within your st 60 days of warranty, they will only answer e-mails once you've given them your model serial number (and a whole host of other information) and they have satisfied themselves it's still in warranty [and even then it will often be a week between replies] and once it's out of warranty - well.... forget it! Hell will probably freeze over before you actually manage to get some reasonable kind of customer service short of you going to one of their centers and just sit, wait and glare until they deign to look at your unit (as I have had to resort to in the past)!
The only upside is they are generally quite good and I haven't had too many problems with my trusty (if now rather antique!) 60GB Zen Xtra.
Hope this provides some enlightenment to your decision on whether or not to get the unit! -
Gateway Failover with CCM 4 1 3b
Hi
I am having issues with gateway redundancy on CCM 4-1-3b. Basically when the Primary route group gateway fails, the backup gateway does not work. You can not make external calls out of this gateway unless you change the priority of the gateways in the route group manually. The only other time it failsover is if ip connectivity fails between the primary gateway and the CCM. Has anyone had any issues like this or is there a bug with this version of CCM? Failover with RG/RL should be a basic feature with CCM?Hi Derek,
CCM regards H323 gateways as a black hole. CCM does not have the ability see the busy/fail status of the H323 ports. As you said, the only way CCM would switch to the second gateway, in the Route List, would be if IP connectivity was lost.
I would recommend that you additionally configuring outbound VOIP dial-peers (with a higher preference value) to forward the call from your first gateway to your second gateway when the first gateway is up and, for whatever reason, the outward ports are busy or down.
Regards
Chris -
Hello,
I'm implementing RFC monitor with CCMS and I have a problem.
I was able to implement the method with an auto-reaction method of send mail.
It is working fine but it doesn't repeat the alert! Let's say, imagine that the RFC isn't working since 3am... we are now at 13pm and the alert is not triggered anymore. In fact, in RZ20 I just see 1 Alert triggered at 3am.
Is there any way to set this alert to trigger every period of time?
thanks.
regards,
Filipe VasconcelosHello,
first it would be good to clarify which monitor are you implementing - there are multiple RFC monitors - for example:
Availability and Performance Overview Monitor :
http://help.sap.com/saphelp_nw70/Helpdata/en/ae/cd823bd26a5c42e10000000a114084/frameset.htm
Transactional RFC and Queued RFC Monitor
http://help.sap.com/saphelp_nw70/Helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
Best to type the name of monitor as displayed in RZ20.
Based on the type of monitor you might find the answer here:
http://help.sap.com/saphelp_nw70/Helpdata/en/f6/c55c3bab977239e10000000a114084/frameset.htm
(for example for status monitor you can set option "When should a message trigger an alert?" to "Always (at every message)")
Anyway I am afraid that in case you are using performance monitor there is not much you can do. Possibility can be to check if data collection method (for example function) has parameter that can do this (but I am skeptical about this) - if not then you would have to adjust data collection method or implement the monitoring in another way.
Possibility can be to use some kind of "switch". You can activate option "Display All-Clears in Alert Browser" - this will generate green alerts. Then you can program your own autoreaction method that will perform the "switch operation" (simple insert/update/delete into some Z-table you will create - based on status of alert - red/yellow/green.) Then you can have batch job running another Z-program that is reading this value and constantly reminding use via email.
If you program this in a good way (abstract autoreaction method) - you can reuse this solution for other monitors as well and easily buid you own email notification functionality.
I hope it helps.
Best regards. -
CP5.5 Navigation not working with 2 questions in different branches of a project.
Ok.
The project is a simple thing that advances to a two option menu.
Each of the two options takes you down a branch of learning till you get to a single question slide (multiple choice)
Once that is completed (either correctly or incorrectly) you can go back to the menu page and click on the button to go down the second branch which again ends with a question slide.
Once that is completed (again either pass or fail) you progress through to the end of the product to the close.
You can go down either branch.
However, once you have done either branch 1 or branch 2 question (in either order), when you go down the alternate branch, the product hangs prior to the second question slide.
Any ideas?
I know quizzing in CP5.5 is a bit tetchy.Just had another idea. This issue might be due to Quiz Scope.
Try adding a score to the button/s that allows the user to head off down either branch. Alternatively, try adding a True/False question on a slide BEFORE the branching slide.
If having a scored object at or before the branching slide solves the issue, then you know that what you're dealing with is a Quiz Scope issue. Then you can just extend the quiz scope to at or before the branch slide to fix it. -
Simple Maxtor External Drive Question
Thanks in advance for any advice anyone can share.
I just bought and setup a Maxtor One Touch 4 Plus External Drive. I have it all set up to work with TM and everything seems to be fine.
My question is -- should I leave the drive on 24/7 or shut it off? My Mac is normally off all day while I'm at work. I don't want to burn the drive out, but I don't really see an on/off switch on it...
Any ideas?I have one left over from my PC days and was wondering if I could use it with Time Machine.
Yes, you can, as long as you partition it with GUID or APM partition type. Instructions for them are in several places, for example
http://www.macobserver.com/tip/2006/08/16.1.shtml - either USB or firewire drive will work for Time Machine (when partitioning, give it a short simple name with no spaces, special characters etc). -
Hello again, I'm still learning about my imac so here I go with latest question- I've installed word 2011 and would like to know how to email the document I have just written straight to a recipient but can't seem to find how to do this. Please advise in simple terms
Also how do I save to a file.
Thank you clever world!!To save you file click the disc icon in the tool bar or file save as:
To email the Word document to someone compose a new message and click the paper clip to attach the Document. -
Strange globe and folder with a question mark on it icons showing at start up screen, PLEASE HELP!
I got a PowerBook G4 tonight from my brother's friend. His friend said it's works fine, but he thinks it needs updated. It powered up fine at first. I looked around and found files that belonged to the previous owner (pictures etc) so I dragged them to the trash and deleted them from the trash. I couldn't get the wi-fi working. It recognized that it was there, but when I clicked on it and typed in the password, it wouldn't connect. So I took it out to our BTHomeHub and took the Ethernet cable out of the computer and plugged it into the PowerBook. I tried going onto Safari but nothing happened so I restarted it. When it loaded back up there's a globe icon that flashes and then a folder icon with a question mark on it, the first time it loaded past it. I held the power button down to turn it off and turned it back on again (hoping it would've disappeared) Now it won't load past that. I've looked around trying to find a solution, but nothing I've tried has worked. I even tried turning it on and off again, countless times. I'm really worried I've done something wrong and that it's broken! PLEASE HELP! (I'm not brilliant with computers, so simple instructions please!)
The globe icon means the Mac is trying to find a Network system to boot. Startup but depress the Option key. This will activate the Startup Manager window. Hopefully you hard drive will appear. Select it & click the right arrow.
Cheers, Tom -
I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????
Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X. -
White Macbook has folder with a question mark inside when powered on.
My brother has a white macbook given to him from a friend and when it is powered on it shows a folder icon with a question mark in the inside flashing and it doesn't boot. He has sent me on a quest to get a power adapter and a new hard drive, He thinks the hard drive is fried. Does anyone know for sure if thats the case, I just don't want to buy all that stuff to figure out that the logic board is dead or something else irreplaceable. There is no backup disks, all I have is a replacement leopard disk from apple used for my mac mini.
If it is a retail Leopard disc--black with a giant purple X on it--then yes, you could use them, with a couple of caveats. One, it would technically be a violation of the license to use that install of Leopard on more than one computer, and terms of use on this forum forbid me from encouraging such an action. And two, depending on how old this used MacBook is, your install of Leopard may pre-date manufacture of the MacBook and, as a result, not be able to boot the MacBook anyway. However, judging by the info in your signature, that is probably not a problem.
If the disc for your Mini is gray and shipped with or was meant to ship with the Mini, then no, the disc will not work.
I still encourage you to get the system discs that came with the MacBook originally, as they have the Apple Hardware Test included, and, as I suggested above, running any OS (or other Apple software) on a Mac without the discs means technically it's an unlicensed copy. -
When I boot up my I get a grey screen with a flashing folder with a question mark
I was trying to set up a bootable Linux flash drive for another computer using UNetbootin and I accidentally selected an empty partition on my hard drive instead of the USB I was trying to use. It went through the install process, and I didn't realize it was on my computer rather than the USB. The computer worked fine, so I thought nothing of it.
Today, I go to mess with my computer and it is frozen at the login screen. I restart it, and now I just get a blinking folder with a question mark. I try to go into recovery, but it isn't there. Internet Recovery works fine, but when I go to use Disk Utility or to reinstall the OS it cannot find the internal Hard Disk.
What am I supposed to do here? I don't want to lose all my data.greenbil1
You can contact AppleCare to buy a replacement set of the oringinal Install discs for a nominal cost. You will need the serial number and a credit card to place the order. -
I tried googling several solutions, but so far nothing seems to work. Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8. When i do go to the repair disk utility, on the eft hand side shows two hardrives one is Untitled and another is Hitachi, i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer. When i insterted it onto the disc drive it came out under SUPER DRIVE and everytime i double click on the CD it says something about attaching images/ I also forgot to mention that the MAC OSX 10.6.8 Update shows on the left hand side on the bottom in DMG format. I dont know what else to do, please help?
DestroyGalaxies wrote:
a flashing folder came on with a question mark in the middle of it
This is the firmware telling you it can't find a bootable OS X volume.
Usually to solve this all you do is hold the option key down on the built in keyboard while booting the computer, this enters Startup Manager and then you choose OS X to boot, then in System Preferences > Startup Disk you change it to the boot volume and it tells the firmware.
Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8.
What you have is a 10.7 or 10.8 Recovery HD from when 10.7 or 10. was on the machine previously.
The Macintosh HD partition only was erased and 10.6 installed on it, without erasing the entire drive like what should have occured to remove the Recovery HD partition.
So you have a mucked up machine.
i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer.
Well there goes your problem there, your downloading illegal copies of Snow Leopard from a untrusted location.
10.6 is not available for download, except from pirate sites. You likely have malware or a compromised system.
I dont know what else to do, please help?
What you need to do is call Apple via phone, tell them the make of your machine and order the appropriate 10.6 disks, they are inexpensive now. Some machines that came with 10.6.3+ origianlly need machine specific disks, other wise pre-10.6.3 Intel Macs can use the 10.6.3 white retail disks.
Once you have the disks, you need to backup your personal information off the computer to a external storage drive using the emergency quick copy method, then disconnect it to prevent mistakes.
Most commonly used backup methods
Next follow this proceedure and make sure to select the ENTIRE drive on the far left with the drive makers name and size, this will erase the entire drive, then install 10.6 from the disk
How to erase and install Snow Leopard 10.6
When finished setup the machine and log onto the Internet and use Software Update to get current on 10.6.8
Don't use pirated software, it's likely been compromised in some fashion. -
Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. Double clicking on the box will open the image in a separate window. It's very slow and tedious for multiple images. How can I go back to attached and displayed images? If I click on "Forward", the images appear instantly in the email to be forwarded.
Scott,
My problem seemed to fix itself. Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something. Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it. A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to. Well, I shut it down one night so the following morning, I could write down each step. Lo and behold, the images, etc. are all there again! Solved, but I'm not sure why.
Tom
Maybe you are looking for
-
Variable size item Vs Stock item
Hi Experts, I have a doubt regarding the use of variable size item over standard stock item. I will give an example as under. I have an item called cable which is to be added to a header material. This cable will be used in many header materials. I t
-
When i send a text message from my iphone 5s, it is sending it from my icloud email rather than my phone number , how can i change this ? Thanx
-
Hi, I am new to Dialog Prog, can you please let me know what is the prob in the below code.I have to call a Subscreen 5000 up on one condition. *& Module STATUS_4000 OUTPUT * text MODULE status_4000 OUTPUT. SET PF-STATUS 'PF4000'. CA
-
Today while working on PS Elements 12 I was asked if I wanted to save my work. I said yes. After that I was unable to save my editing work on PSE 12. I use OS X Mavericks 10.9.3. Instead of saving my work I continue to get a "could not complete your
-
I keep having a recurring kernel panic. How do I fix this? [LOG]
Interval Since Last Panic Report: 111076 sec Panics Since Last Report: 4 Anonymous UUID: D59CE72A-BDC4-4F39-83D7-68903CC63D43 Thu Aug 1 21:54:25 2013 panic(cpu 2 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f810ce