Simple How-To # 1: Adding additional base stations

That's all I need. A series of simple, step-by-step 'how-to's'.
I've been using Macs for almost 20 years, but find the instruction manual and software for the new Airport Utility [AEBSn device] to be particularly unhelpful.
I need to add an AX to extend the range of my network [and be able to use my brand-new printer]. The software seems to be instructing me to, "change base stations"? Why? The older Airport Admin Utility [supplied with AX's] did not use such counter-intuitive instructions and was much simpler to set up multiple base stations. What gives Apple?
Give it to me simple Apple, my brain cells aren't getting any brighter! Is there anyone out there that can post simple step-by-step instructions? I'm sure I won't be the only one appreciating that kind gesture.
Anyone?

AEBSn - WDS Setup
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete.)
Main Base Station Setup (AEBSn)
- Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
- Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
- Select the main base station, and choose Manual Setup from the Base
Station menu, or double-click the base station to open the configuration in a separate window.
- Enter the base station password if necessary. If the base station is using the
default password of public, you will not be prompted for a password.
- Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
- Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
- Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
- Click the Add button and enter the MAC address of the base stations you want to connect to this base station.
- Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup (AX)
- Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as a remote base station.
- Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
- Select the remote base station, and choose Manual Setup from the Base Station menu.
- Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
- Enter the same network password as the main base station, if necessary.
- Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
- Click WDS and choose “WDS remote” from the pop-up menu.
- Enter the MAC address of the main base station in the WDS Main field. The MAC address is also referred to as the AirPort ID and is printed on the label on the bottom of the base station.
- Click Update to transfer the settings to the base station.
(ref: Pages 41-45 of "Designing AirPort Extreme 802.11n Networks.

Similar Messages

  • How do I turn off base station logging?

    Airport Extreme seems to have started logging events two days ago with no input from me.  Have been using for about two months.  I wonder what's going on and how I can turn off base station logging.

    There are basically two types of logs that the AirPorts provide: 1) The "real-time" logs under the Logs tab of Logs and Statistics within the AirPort Utility, and 2) Syslogs which require that you provide a destination device that is set up to collect these types of logs.
    Which are you referring to? If it is the former, there is no "off" option. With the latter, you would just need to remove the IP address from the Syslog Destination Address window on the Logging & Statistics tab of the AirPort Utility.

  • How to control an Apple Base Station with 3rd-party wireless card?

    I recently upgraded my early 2004 Power Mac G5 2GHz DP to the 802.11n standard using a Newertechnology MAXPower 802.11n/g/b Wireless PCI Adapter to communicate with my new "n"-standard 2TB Time Capsule. My G5 shipped with an 802.11g-standard Airport Card which I disconnected when I installed the PCI card to avoid hardware conflicts. The new n-standard wireless set-up works without a problem, but having lost the Apple Airport Card, I no longer have the ability to control/manipulate the Timecapsule via the third-party card e.g. I cannot connect/disconnect my internet connection or otherwise troubleshoot the base station.
    So, the question is, how can control an Apple base station with a third-party wireless card? As it stands now, I must boot up my laptop just to see if I have a connection.
    My thanks in advance,
    T. North
    Brussels, Belgium

    Thanks for the assistance. Yes, I can indeed administer the Time Capsule from inside the Airport Utility, but I am still unable to connect or disconnect the Internet connection like you can with an Airport card (using the Airport drop-down menu.) If my ISP signal drops for whatever reason (which is does often) I have to boot up my laptop just to reconnect. Is there some feature within the Airport Utility that permits one to connect/disconnect the signal? If there is, I haven't found it yet.

  • How Do I Network Multiple Base Stations Using Ethernet AND Wireless?

    Hi, everyone. I am having great difficulty setting up a network using multiple Airport Extreme base stations that are connected using both ethernet and wireless connections. I have one main base station connected to a cable modem, and I want to create a unified network and share its internet connection with three other base stations: one that is connected on an ethernet network, one connected to it wirelessly, and the fourth that would be connected wirelessly to the base station on the ethernet network.
    The "Designing Airport Networks" manual explains how to build roaming networks of base stations that are connected to one another via ethernet. And it also explains how to build a WDS of wirelessly connected base stations. What it doesn't explain is how to build a network employing both ethernet AND wireless!
    I spent most of today trying to get the base stations to work in various configurations to no avail. I could get part of the network working, but not all of it. I'm at the point where I'm going to need to do a hard, factory reset on all the base stations and start over, but I wanted to see if anyone had any suggestions for me. Any help would be incredibly appreciated! Thanks so much...
    Message was edited by: Bill Ryan2

    If you have stations connected via Ethernet and want them to appear as a single seamless wireless network, configure them as follows:
    Same SSID (network name).
    Different channels. As far apart as possible.
    Same wireless encryption type/level/password.
    Only the base station connected to the Internet source distributes IP addresses. All the others are configured as bridges.
    If you have stations connected wirelessly using WDS and want them to appear as a single seamless wireless network, configure them as follows:
    Same SSID (network name).
    Same channel.
    Same wireless encryption type/level/password.
    It appears that you want to mix the 2 type of connections. This is easily done and here is a simple example:
    base1 Ethernet base2
    In this example base1 and base 2 are configured as I suggested above for Ethernet connections.
    Now add base3 connected wirelessly:
    base1 Ethernet base2 wireless base3
    Now base2's configuration must be modified slightly so that it acts as a WDS main. base3 is configured to act as a WDS remote (or relay).
    No changes are needed to base1 since it is completely unaware and uninvolved in the WDS link between base2 and base3.

  • How can I change the base station my airport express connects to?

    I just added a new AirportExpress to my wireless network and am using it to extend the range of the network and for AirPlay. When setting it up I selected the main base station that provides the wireless network when asked to select a device for it to connect to. However, now when I view it in Airport Utility, it's the only device on the network that has only Good signal strength rather than Excellent. There is another AirportExpress conencted which has Excellent signal strength that is the closest access point to this new AirportExpress.
    How can I change the setup using Airport Utility so that that's the device that it's using to connect to the network?

    With a Mac using the Airport Utility.
    With a PC using the Airport Utility you can install on your PC with the install disc included.

  • Multiple AEBS, How to choose a specific base station?

    Hello - I have a new AEBS N as well as an older UFO-shaped AEBS. Both are connected to the internet via ethernet and I am sharing a wireless network between the two. I have one printer and 2 USB hard drives hooked up to the AEBS N via Air Disk. So far so good.
    The question I have is in regard to which base station I am attached to. Is there a way to switch from one base station to the other without having to pull the power cord on the one I want to disconnect from? I ask this because if I move to the second level of my house which has the UFO-shaped AEBS then I will get my wireless connection via that base station however I still wish to stay connected to the AEBS N on the lower level which has the printer and USB drives attached to it. Going through the old AEBS through the new N one to access the hard drives really slows down hard drive access time, and it is much speedier with a direct connection.
    Thanks.

    Same here... Not sure what the deal is with that... How can you see the other and the drives connected to it through the other one, but if you are connected to the other one, you can't get on the internet... Not good. When I moved and it automatically connected to the one that can't access the internet, I selected it through AirPort Utility and restarted it, the computer than found the one with the internet while the other one was off line restarting. Not a fix, but easier than unplugging it. I'm sure Apple is working on a TON of fixes for this thing... Time will tell and it will take time to perfect it!

  • HT4260 Does this setup assume each additional base station remains connected to the primary by ethernet?

    I have 1 x Time Capsule + 1 x Extreme + 3 x Express which I would like to connect in a roaming network. The TC is connected to the internet directly through ethernet (my house is ethernet wired). The remaining base stations should all connect to the same network created by the primary base Time Capsule (same name and password), but not wired back to the Time Capsukle but through the ethernet ports in each room. However I can't get this to work.
    Any suggestions as maybe I am missing something here?
    Thanks P

    For a roaming network to work, all of the base stations need to be connected back to the Time Capsule (in this case) by Ethernet. So, one configuration would be to connect an Ethernet drop cable between the LAN port on the TC and an Ethernet switch or switch panel. From there Ethernet would run to various locations in the house. At any of these runs, you would connect a base station ... so that all base stations are on the same subnet as the TC.
    The key is that the primary router must be connected to the Internet modem and all other routers reconfigured as bridges. Please check out the following Apple Support article for additional details on configuring a roaming network.

  • How to downgrade Airport Extreme Base Station firmware?

    I updated the firmware of Airport Extreme Base Station to 5.7 recently. However, I notice that the speed is very slow if one of the computer is downloading. I am thinking to revert the firmware to previous but don't know how to do it. Any advice and suggestion please?
    Thanks

    See if this helps.
    http://discussions.apple.com/thread.jspa?threadID=285838&tstart=0
    Cheers Don

  • How to configure a Snow base station with Snow Leopard?

    According to "Mac OS X v10.6: About incompatible software"
    http://support.apple.com/kb/HT3258?viewlocale=en_US
    ...AirPort Admin Utility for Graphite and Snow 4.2.5 is incompatible with Snow Leopard.
    I have a Snow AirPort Base Station, and AirPort Utility 5.4.2 doesn't seem to be able to see it. (At least I can't figure out how to make it do so.) Can it not work with a Snow Base Station?
    Now what?

    One solution is to keep a pre-Snow Leopard OS installation (either on another partition or external drive) and then boot from that when you need to configure the snow AirPort base station (ABS).
    Another solution is to use another Mac running a pre-Snow Leopard OS to configure the snow ABS.
    Since the snow ABS was discontinued 6 years ago I can understand why support is going away.
    The last PowerPC was shipped only 3 years ago and that is not supported by Snow Leopard either.

  • How to use a graphite base station as inserton point or bridge

    I have an old 6400 running 9.2.1 an a graphite base station. I have done this before on my FW800 but I dont find the software in 9.2.1. You just connect the connect the ethernet out of the system to the ethernet in on the base station. I think I used something like the Airport Admin Utility. If you do a "find" on Airport in 9.2.1 there are no hits. I tried looking under downloads and didn't find anything. The LAN portion of my network goes from the moden to the router and one port of the router to the base station. I configured it using Airport Admin Utility from my FW800 no problem, no problem. The old Mac compatible airport cards are almost impossible to find. Ideas

    I am trying to use a free graphite base station as an airport card.
    Sorry that is not possible. The graphite AirPort base station (ABS) can not act as a wireless client.

  • Added a BASE Station now Drop box's don't work for wireless users

    We have a small business run out of a large home. Since Tiger came out we were using the drop box networking technology flawlessly. But recently we installed an Airport Base station replacing our Linksys router and now all the laptop users who connect wirelessly cannot be accessed remotely, we can use the drop box only with the people hardwired. Does anyone have any suggestions.

    You might try making a Recovery set with the software included on your machine-though it may not work now either. Creating Recovery Media >> Windows 8
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How to configure old AirPort Base Stations with current Mac

    Hi everyone,
    I noticed that you can't use the current AirPort Utility to configure old AirPort Base Stations. I'm talking about the pre-Extreme models that only had 802.11b (Graphite and Snow). It won't find them and even entering their IP manually won't let you enter the configuration.
    Copying over the older AirPort Admin Utility from a 10.3 system won't let you configure them either, the app itself runs fine though. You need to use an older PPC Mac with OS 9 or max OS X 10.3 if I recall correctly.
    Is there a way to do it directly from a current Intel Mac running Leopard?
    Thanks
    Björn

    *Airport Admin Utility* for Graphite and Snow
    <http://www.apple.com/downloads/macosx/apple/application_updates/airportadminuti lityforgraphiteandsnow425.html>

  • HT3728 how do you switch airport base station controls from 1 computer to another?

    I recently purchased a macbook air (love it!) and I'd like to change out the the airport base station control access to my new macbook air from the PC that I initially set it up with. Is this possible to do without having to do a factory reset on my airport base statsion?  My PC is on the verge of klonking out any day...

    You can access your Airport from any device that has the Airport Utility installed as long as you are hardwired or in range of the network - I am not familiar with the new Macbook - it might already have Version 6 in utilities - this is the newest version and it is somewhat streamlined - if you want the same functionality that you are used to in the Windows version, then try and download 5.6 for your Mac - you can also use the mobile version by downloading the app to an Ipad or Iphone but is also a less functional version.

  • I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

    i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

    Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

  • How do I get a VPN acct accessed using Airport Extreme Base station?

    I have PC running Windows 2000. For my job, I access a hospital VPN at home. In my home, I am able to set up the Extreme Base Station for wireless conductivity with computers in my home and all have access internet wirelessly. No problem.
    The problem is that I cant get it all to work together. How do I configure the base station to recognize/allow the VPN client to enter my network?
    I currently have WEP 128 on. The computer used for VPN is hardwired to the base station. Even with security turn-off, I cant access the VPN via base station set up as it is.
    help!
    PC   Windows 2000  

    I recently got my roommate's Lenovo t43p with VPN to finally work with my Airport Extreme.
    1. Open the Airport Utility
    2. Double click on your Airport Express on the left side to open up the panel.
    3. Click on the "Internet" tab and then select the "DHCP" tab.
    4. Click the "+" sign under "DHCP Reservations"
    5. Create a name for the profile like "XP Work Laptop" or whatever, and then click Continue
    6. You'll need to get your Windows laptop's MAC address which is sometimes under your laptop on a sticker, or you'll have to dig through XP's ridiculous Control Panel to find it.
    7. Enter your laptop's MAC address in the field.
    8. Lastly, in the 'IPv4 Address" field designate an IP address for your XP laptop that is within your router's range, if you're not sure of the range, the "IPv4 Address" range should be auto-populated with an IP address and you can just try it with that, or if it doesn't work you can change the last number to something higher but no more than like 4-5 digits more.
    Hope this helps, Good luck!!

Maybe you are looking for