Simple iCal client/server configuration guide?

Is there a simple guide somewhere which explains how to setup the iCal client once your iCal Server is up and running?

Read Antonio Rocco's posts. Specifically read these:
http://discussions.apple.com/thread.jspa?messageID=7602817&#7602817
http://discussions.apple.com/thread.jspa?threadID=2013389&tstart=0
Long story short, its all about the DNS config. after you get that sorted, config Open Directory. after that, iCal. Antonio will get you sorted...

Similar Messages

  • Running reports created with Reports 9i in client-server configuration

    I need to have users run reports created with Oracle Reports 9i on workstations without any Oracle products installed on it, (in a client-server configuration as opposed to Web based) . I am looking for a step-by-step approach to accomplish this. I looked through the installation documents in OTN and I did not see one that addressed this.
    BTW, I saw an earlier post in this form which disscussed this,indirectly, for Reports 6i but I don't think these steps will work for 9i rpeorts
    ** Earlier post
    Question:
    I have an application in Oracle 8i, Forms 6i, Reports 6i. Now I want to make executable CD which will be installable in nature. I don't know how to make it or what tools to be used for this . Kindly help me out.
    Answer:
    You can write a .bat file for installation.....
    This file should do following things.
    1. Oracle8 Personal Setup
    Install only Database (no tools)
    2. Oracle Developer200 Setup
    Install only Forms Runtime
    Reports Runtime
    Graphics Runtime
    3. Use imp/exp to put the desired database...
    4. Copy exexutables in some directory and place shortcuts in programs and destkop
    5. Make new file-types in start->setting ->folder options-> file-types
    and specify that in which runtime-application you want to open your executables....
    Thanks in advance,
    Audrey Watson

    hi audrey,
    there is no client/server runtime available for reports9i. what
    you can do is to use the rwclient executable shipped with IDS
    to submit jobs to the reports server.
    there are plans to provide a stand alone thin client in the
    future but this is not available yet.
    regards,
    christian

  • Access-SQL Server (Client Server Configuration) Best Way To Refresh SQL Server Records ?

    We are using Access 2013 as the front end and SQL Server 2014 as the back end to a client server configuration.
    Access controls are bound to the SQL fields with the same names. When using Access to create a new record in a Form, the data are not transferred to SQL if the form is exited to display a different Form or Access is closed. If the right or left arrow navigation
    buttons at the bottom of the form are first used to display either the previous or next record, then the data in the new record are correctly transferred to SQL.
    What is the best way to refresh the new SQL record prior to the closing of the new record in the bound Access form ? We have tried Requery of the entire form and with all of the individual controls without success. We are looking for a method of refreshing
    SQL that functions in a manner similar to that of what happens with the navigation buttons.
    Thank you very much for your assistance.
    Robert Robinson
    RERThird

    Hi Stefan,
    I had added the code to set me.dirty = False in response to the On Dirty event and didn't realize that it was working properly. I had tried other several approaches and must have become confused somewhere along the line.
    I retested the program. On Dirty is working and the problem is solved.
    Thank you very much for your assistance.
    Robert Robinson
    RERThird

  • Primavera P6 Client Server Configuration

    Hi,
    I am new to Primavera. I wanted to know what are the exact specifications required for installing Primaver P6 EPPM Client / Server.
    The configuration would consists of all the modules like - Project Management, Timesheet, Web Access.
    Also, we have a server with SAP installed on it. Can we still go ahead and install Primavera on it.
    I have searched a lot on Google for the realistic client/server configuration. But no luck.
    Kindly help.
    Thanks

    Its Java j2EE

  • Please tell me how to use the Simple bluetooth client server example.

    Hi i used the simple bluetooth client server example in labview 7.1. Iam getting an error saying your system does not support the network operation.  I have following doubts also.
    1. Should i pair the device before running the labview.
    2. Should i enable the file transfer wizard in the software given with the bluetooth adapter.
    Please help
    Thank you
    R.Prem kumar 
    09940446193

    Hi R.Prem,
    Could you please let me know what error code is associated with this error message? Also could you please provide a description of the setup you are currently using? Thanks!
    Best regards,
    Steven

  • Problem with entries from the ical client/server

    Hi together,
    I have the problem that my events are not longer visible in the ical-client of my assistant and I also can not see the events from her. Also I can not see this/my entries on the other clients (iphone, ipad).
    When I add an entry to my calendar on mac Book an then I look the the calendar in the wiki (to have a look on the server local) I can not see my calendar-entries there. So they are not written down. But why?
    In the log I find a lot of this entries:
    127.0.0.1 - "user as xxb" 08/Nov/2010:10:11:58 +0200 "REPORT(CalDAV:calendar-query) /calendars/_uids_/wiki-xxb/calendar/ HTTP/1.1" 207 65 "https://www.xxxx.ch/groups/xxb/" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; de; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12" i=8012 t=131.9 or=1 responses=0
    and:
    2010-11-08 09:56:29+0100 [-] caldav-8009 [-] http://twistedcaldav.method.propfind#error Error reading property ('DAV:', 'current-user-privilege-set') for resource /calendars/_uids_/wiki-xxb/calendar/: <StatusResponse 401 Access denied while reading property {DAV:}current-user-privilege-set.>
    and:
    2010-11-08 09:56:52+0100 [-] mailgateway 2010-11-08 09:56:52+0100 IMAP4DownloadProtocol,client http://twistedcaldav.mail.IMAP4DownloadProtocol#error IMAP login failed for icaladmin
    Does someone have an idea what the problem may be?
    It worked fine till the begin of last week - I can not remember to change something in this time.
    Thanks
    Marco

    COH-571 is corrected in the 3.2 pre-release. See:
    http://wiki.tangosol.com/display/COH32UG/Release+Notes
    Sorry for the inconvenience :) .. if you prefer a patch for 3.1 or 3.1.1, it will still be available from support at Tangosol.
    Peace.

  • MUDE for client-server configuration

    I can easily connect from a client remotely to a server hosting OBIEE, by creating a ODBC system DSN that points to
    the server, and choosing this DSN from the list of available DSN from Administration => file => open => online. works
    perfectly
    When I configure projects at OBIEE server as a Multiuser Development Environment, I can not connect from a client remotely to a server. Administration => file => nultiuser => checkout does not give me an option to choose the system DSN for remote server
    Can someone clarify steps to configure MUDE in a client-server environment
    Thanks

    Amrita,
    In the article by Venkat, that you referred to in your response , I read the article, I have a few questions
    1. When I install OBIEE, the Master Repository automatically created at the c:\OracleBi\server\Repository directory
    When you create projects, they are created in the Master Repository.
    Do I then copy the master repository to Shared Network directory, ex. N:\SharedRepository
    2. When i start the AdminTool from the client m/c, how will the client knows to connect the remote server
    I have not gotten to this part yet, just want to clarify, if any configuration necessary on the client side,
    before file => Multiuser => checkout
    Thanks

  • Coherence Clustered Client Server Configuration

    Hi,
    I am trying to create a client-server setup in coherence and I have been able to do that successfully using Coherence Extend in a single client - single server environment. However, what I need to do is that, I need to create a cluster of servers and my client should be able to pick the data from any of the clustered servers. Can someone tell me how to configure that.
    Right now my server-config xml looks like : -
    <cache-config>
         <caching-scheme-mapping>
              <cache-mapping>
                   <cache-name>dist-MYCache</cache-name>
                   <scheme-name>MY-distributed-cache-scheme</scheme-name>
              </cache-mapping>
         </caching-scheme-mapping>
         <caching-schemes>
              <!--
    Distributed caching scheme.
    -->
              <distributed-scheme>
                   <scheme-name>MY-distributed-cache-scheme</scheme-name>
                   <lease-granularity>member</lease-granularity>
                   <backing-map-scheme>
                        <local-scheme/>
                   </backing-map-scheme>
                   <autostart>true</autostart>
              </distributed-scheme>
              <proxy-scheme>
                   <service-name>ExtendTcpProxyService</service-name>
                   <thread-count>5</thread-count>
                   <acceptor-config>
                        <tcp-acceptor>
                             <local-address>
                                  <address>server1.domain.com</address>
                                  <port>8081</port>
                             </local-address>
                        </tcp-acceptor>
                   </acceptor-config>
                   <autostart>true</autostart>
              </proxy-scheme>
         </caching-schemes>
    </cache-config>
    My Client-config xml looks like :-
    <cache-config>
         <caching-scheme-mapping>
              <cache-mapping>
                   <cache-name>dist-MYCache</cache-name>
                   <scheme-name>extend-MYCache</scheme-name>
              </cache-mapping>
              <cache-mapping>
                   <cache-name>dist-extend-MYdist</cache-name>
                   <scheme-name>extend-MYdist</scheme-name>
              </cache-mapping>
         </caching-scheme-mapping>
         <caching-schemes>
              <!--
    Distributed caching scheme.
    -->
              <distributed-scheme>
                   <scheme-name>extend-MYdist</scheme-name>
                   <service-name>MYDistributedCache</service-name>
                   <local-storage>false</local-storage>
                   <local-scheme></local-scheme>
                   <back-scheme>
                        <remote-cache-scheme>
                             <scheme-ref>extend-MYCache</scheme-ref>
                        </remote-cache-scheme>
                   </back-scheme>
              </distributed-scheme>
              <remote-cache-scheme>
                   <scheme-name>extend-MYCache</scheme-name>
                   <service-name>ExtendTcpCacheService</service-name>
                   <initiator-config>
                        <tcp-initiator>
                             <remote-addresses>
                                  <socket-address>
                                       <address>client.domain.com</address>
                                       <port>8081</port>
                                  </socket-address>
                             </remote-addresses>
                             <connect-timeout>5s</connect-timeout>
                        </tcp-initiator>
                        <outgoing-message-handler>
                             <request-timeout>2s</request-timeout>
                        </outgoing-message-handler>
                   </initiator-config>
              </remote-cache-scheme>
         </caching-schemes>
    </cache-config>
    And my tangosol-override xml (SAME FOR CLIENT AND SERVER) looks like :-
    <coherence>
         <cluster-config>
              <member-identity>
                   <cluster-name>MYUATCluster</cluster-name>
              </member-identity>
              <unicast-listener>
                   <well-known-addresses>
                        <socket-address id="1">
                             <address>server1.domain.com</address>
                             <port>8088</port>
                             <port-auto-adjust>true</port-auto-adjust>
                        </socket-address>
                        <socket-address id="2">
                             <address>server2.domain.com</address>
                             <port>8088</port>
                             <port-auto-adjust>true</port-auto-adjust>
                        </socket-address>          
                   </well-known-addresses>
              </unicast-listener>
              <multicast-listener>
                   <time-to-live system-property="tangosol.coherence.ttl">4</time-to-live>
                   <join-timeout-milliseconds>3000</join-timeout-milliseconds>
              </multicast-listener>
              <packet-publisher>
                   <packet-delivery>
                        <timeout-milliseconds>30000</timeout-milliseconds>
                   </packet-delivery>
              </packet-publisher>
              <service-guardian>
                   <timeout-milliseconds system-property="tangosol.coherence.guard.timeout">35000
                   </timeout-milliseconds>
              </service-guardian>
         </cluster-config>
         <logging-config>
              <severity-level system-property="tangosol.coherence.log.level">5</severity-level>
              <character-limit system-property="tangosol.coherence.log.limit">0</character-limit>
         </logging-config>
    </coherence>

    I am not sure I understand you correctly, so let me re-phrase my question :
    Right now my client-config.xml has :
    <remote-cache-scheme>
    <scheme-name>extend-MYCache</scheme-name>
    <service-name>ExtendTcpCacheService</service-name>
    <initiator-config>
    <tcp-initiator>
    <remote-addresses>
    <socket-address>
    *<address>server.domain.com</address>*
    <port>8081</port>
    </socket-address>
    </remote-addresses>
    <connect-timeout>5s</connect-timeout>
    </tcp-initiator>
    <outgoing-message-handler>
    <request-timeout>2s</request-timeout>
    </outgoing-message-handler>
    </initiator-config>
    </remote-cache-scheme>
    where server.domain.com is one of the servers of the cluster, so I will face a problem when this server goes down but the cluster is still up and running. Because this client can only contact server.domain.com. What do I need to change so that every time it looks for the cluster and not a specific server.
    Edited by: user1945969 on Sep 10, 2009 10:05 AM

  • Can Simple Data Client/Server VIs communicate between computers?

    I am having trouble using the Simple Data Client VI / Simple Data Server VI to communicate between computers? Can these VIs do this ..or do they simply communicate between each other on a single computer? TIA.

    NO it can be used between two computers. You have to replace the localhist string with the IP address of the computer running the server and make sure that the server computer is allowing external connections on the specified port.
    Regards,
    André
    Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

  • Can I access the built-in queue of the client-server configuration?

    We are working on a remote lab, using LabVIEW 6i. Our solution is based on a client-server structur, where the server unit has the dual function of communicating with the client over the Internet and controlling the experimental setup. If two or more clients are using the setup at the same time, we have discovered that LabVIEW 6i is using a built-in queue system. In our work to make the client inteface userfriendly, we have the following problem. Is it possible to inform the client that he/she is in a queue, and also how many clients are in front of him/her?
    Thanks for any hints.
    Greetings, Anna Söderlund
    anna@ic
    .chalmers.se
    Solid State Electronics, Department of Microelectronics,
    Chalmers University of Technology
    Sweden

    Take a look to this sample Tcp/ip LLB.
    The server vi build-up a queue according to the number of clients connected.
    Based on this principle you can probably manage to make the server to broadcast which client it is sending data to.
    Attachments:
    tcp-ip_daq.llb ‏161 KB

  • Need help coding simple chat client/server

    I'm writing a simple chat server/client... its works fine when run on console.. but when i used Frames, AWT gui's.... it seems that the thread that is used to read the incoming message is suspended ... until i press the [send] button.. It seems to me that AWT consumes the time listening to any event.... and my thread is waiting... for the some AWT specific events to occur.....
    If your interested guys.. i'm willing to post the source code.. here.

    Try using the swing components. I think they are supposed to be more thread safe than awt. There is a tutorial for dealing with threads and swing:
    http://java.sun.com/tutorial/uiswing/overview/threads.html
    hopes this helps

  • OWB Client/Server Configuration

    Dear Gurus,
    The scenario is like this.
    Server OS : Sun Solaris.
    Server Database : Oracle 9i for unix.
    Client OS : Win 2K
    Client Database : Oracle 9i client for Windows.
    If OWB 9i is installed on Win2K machines, all mappings can be executed. ETL process will run smooth.
    ETL Loads are monthly.
    Will the performance be greatly affected if Database and OWB server aren't installed on the same physical machine?
    Is my information listed correct ?
    Your inputs would be appreciated.
    Regards
    Milind

    Milind,
    You first question was "Will the performance be greatly affected if Database and OWB Server aren't installed on the same physical machine?" If you are referring to the database where OWB's runtime schema resides, then yes, OWB Server Side should be installed on the same physical server where that database is.
    Second question - Availability of Oracle Datebase Server 9.2.0.4 on Sun Solaris. The full Oracle9i Database Release 2 is 9.2.0.1.
    9.2.0.2, 9.2.0.3 and 9.2.0.4 are patches on top of 9.2.0.1, with each subsequent patchset including all the previous ones. Pathes and patchsets are downloadable from metalink.oracle.com. So:
    * to get 9.2.0.2 - install 9.2.0.1, apply 9.2.0.2 patchset (patch ID 2632931).
    * to get 9.2.0.3 - install 9.2.0.1, apply 9.2.0.3 patchset (patch ID 2761332).
    * to get 9.2.0.4 - install 9.2.0.1, apply 9.2.0.4 patchset (patch ID 3095277).
    Nikolai

  • Bluetooth Read VI error - simple bluetooth client/server

    Hello,
    I've been able to run both the simple and advanced bluetooth LV examples, but I can't make the simple code below to work between my laptop and my PDA. Connection is established, but the Bluetooth Read VI returns an empty string.
    Thanks in advance for any ideas.
    Server
    Client

    Hello,
    Take a look at the link below, it has a lot of information about using bluetooth within LabVIEW.
    http://digital.ni.com/public.nsf/allkb/921795DD63E315B686256DD60082B252?OpenDocument
    Thanks.
    Best Regards
    Luciano Borges
    R&D Engineer
    Pirelli Brazil

  • OLE Alternatives in Forms 6i Client Server

    I'm fishing for some advice and maybe some examples of how to get around an OLE issue that's adversely affecting an upgrade project.
    We're currently migrating a Forms 4.5 application to 6i. This application displays MS Word documents (OLE Container) that are stored in the database and uses OLE to open manipulate, and save the documents back to the database. We've come across some serious problems with OLE and 6i that don't look like they'll be fixed any time soon (bug #2615804 in particular).
    Since OLE (ActiveX) is not supported a web delivered configuration, we're looking at an alternative to interacting and storing Word documents using a client/server configuration. This will have the added bonus of making the move to web delivery once we decide to go down that path.
    Has anyone out there had any good experience with overcoming this OLE problem? It seems like every pre-Forms 9i book out there has touted OLE as a way of interacting with Office tools and now OLE has become a roadblock.
    I've had a look at the JACOB example, but that doesn't really help if you're not deploying via the web.

    With the beans you've looking at visual stuff : like the look and feel project
    With the importer it's more like leveraging java functionality : in my case I've just implemented a call to a webservice on an application server. There is nothing visual here and it's just called via a straight bit of PL/SQL that call my java classes ( however, in that case I could also use UTL_HTTP directly to make the call and thus not bother with java importer - but the database wouldn't allow UTL_HTTP calls :( )
    For both of these you'd need to tell forms where to find the JAR file in it's java environment - but you won't have that in c/s
    Another way is to load up java code into the database and process it within the database and hide it completely from Forms. I've done this sort of thing loading Apache-FOP into Oracle and creating PDF files in the database (as BLOBS) from XML/XSL also in the database as XMLTYPES.
    At least that's my view on how it fits together ... maybe others know more :)
    Steve

  • Client/Server API with push?

    I set up a simple Socket client server architecture with the Java socket API. However, my clients sometimes are initiators or requests, and sometimes my server is the initiator of infos. Example: client want to get infos from server but also want to tell the server something. The server tells all registered clients something but also can accept requests from clients. So both sides are client AND server (depending on what they currently want to do).
    The socket API is just a classic client/server API, i.e. a server listens and a client sends requets and get responses. For my server to send requests to all clients, this is not enough. Is the only way to have all clients offering a socket server on their computer, too? so that this 2-way-request-communication works?
    This is basically some kind of "push" technology, but i don't want my clients to "poll" the server just to emulate the feature of sending requests from the server to the client. Is there some other (perhaps non-socket) API that offers this?

    @sjasja: how is the socket api symmetrical?It is, trust me! Connection initiation isn't, but after that it is. (Let's assume connected TCP/IP.)
    The server does bind() and accept(), the client does connect(). After that, the connection is symmetrical: either end can issue any number of read() and write() calls in any order. You write() to a socket, it pops out from read() at the other end (though not necessarily as a single packet; TCP/IP is stream oriented, so write() "packets" can and will be glued together, or fragmented at the whimsy of network routers and friends.)
    - accept() //wait for client to send request
    - socket.getInputStream() //read request
    - socket .getOutputStream() //write responseThose don't read or write; they get streams which you can read from and write to.
    In the server, when accept() returns a new connection, you'd start a reader thread for that client. The thread would read() (or readLine() if you implement a line-oriented protocol) and handle the incoming messages. Whenever you want to write to the client, write to the stream returned by socket.getOutputStream(). You may need to synchronize writes if you have several threads that do sequences of write()s that need to arrive at the client sequentially.
    As to the difficulty of socket programming: I don't think it particularly difficult. But then I've written dozens of socket programs since my first one in '85... The Java Tutorial socket chapter shows a simple client/server pair; not terribly difficult I think. In particular, check out the KKMultiServer at the bottom of the sample server chapter.

Maybe you are looking for