Simple list

Hello,
I have a problem with a simple list and maybe someone could help me. I have a simple list, created with classical WRITE statements. In foreground mode everithing is OK, but when I run the report in background mode, I have an extra line in my list, a blank one in the middle of the report...
Does anyone knows why this line appears?

Hi George,
Probably you have defined the number of lines to be printed too low?
Regards,
John.

Similar Messages

  • How to write heading in bold on a simple list?

    On a simple list, I want to write a heading in bold. How to write one in bold?
    Thanks.

    Hello,
    Format intensified on.
    Write: / l_header_text.
    Format intensified off.
    Message was edited by: Cyrill Smirnov

  • How print  ADDRESSbook simple list? Everything prints scewd right &too long

    I'd liike to print out a simple list of names, phone, addresses from my mac AddressBook. Can't I design the layout? Prints first left 1/3 column jjust phone number, center column just name, and all the other info squeezed at the riight margin with several fields that take up space verticle so I can only print sometiimes maybe 4-6 names a page. If i had a lot of notes in the person's 'NOTES' section of their AddressBook page, it will print out everything, even a couple pages. How not print thhat? I want a simple abbbreviated, short list to carry with at least 10-14 names, address,phone,email, etc on each page.
    I'mm sure the annswer is around here somewhere, iif only i knew where.
    Thanking you foor your help and time.

    Hi thelnukus,
    Are you saying that you see the list correctly but it is printing in a vertical format albeit somewhat skewed?
    I'm not an expert with printing the Address Book in "list" form but have you tried creating a PDF first and then printing that? You do know that you can select/deselect what you wish to include in the list from the "attributes" pane?
    My method for printing a list is this:
    1. Open Address Book
    2. Select in the "Names" column the names that I wish to print a list of.
    3. File Menu>Print
    4. Select/deselect addresses/email etc. from the attributes pane that you do not wish to include in
    the list.
    5. Select other features I want such as Font size (regular/large) from the pop up.
    6. Select Print (or if that does not work select Save as PDF and then print that).
    post back if this doesn't help and try to explain what you are seeing exactly.
    littleshoulders

  • A simple list with seven time buckets starting from the date report is run.

    Hi All,
    I am new to ABAP.Recently i have planned to write a progam which will help in planning the delivery of scheduled items.For a given sales Org. it will display all the undelivered,delivered items in a simple list and sort them with delivery dates.it will also provide a summary report at material group.For that i have used selection screen(LIKP-VKORG-Obligatory).when i enter VKORG Details i should get all the delivery docs for which delivery is not done or partially done.For this i have taken one more table LIPS
    (LIPS-MATKL,LIPS-MATNR,LIPS-VBELN,LIPS-POSNR,LIPS-WERKS,LIPS-LFIMG,LIPS-MEINS) for tables LIKP and LIPS VBELN is the key field.when i enter VKORG Data in the selection screen ,how can i get the data from LIPS Table.Please explain?
    Also report should be simple list with seven time buckets starting from the date when the report is run.The amount of quantity to be delivered should be displayed under appropriate bucket i.e within the bucket where its delivery date falls in.for ex:If the report is run on Tuesday 15th march 2010 then the start date 1 should be starting date of the week which is Monday 14th March.
    The report will be summarized at Material Group and Material Number.
    Appreciate your help
    Thanks and Regards,
    Shakeer Hussain

    Sorry, sounds too much like a complete requirement you want done for you by the community.
    Please work on it yourself and search for available information before posting specific problems only.
    Thread locked.
    Thomas

  • Only allowed 1 simple list of web portal?

    Hi all,
    I have 4 simple lists as user prompts for a Service request. From the the web portal all is fine and seperate.
    When i log the same request from the console the 4 list are now 1 big list.
    Any way to seperate these out for the console other than creating MP lists for each?
    Which would mean you can only have 1 simple list per Service request?
    2012 RTM.

    Hi Anton,
    From the request offering setup, i added 4 differnt simple lists
    And from the console when i open the Service request i see all my lists with the default value for list in item 6 above, and when i try to drop down it shows everything from all 4 lists
    Any thoughts or is this normal behaviour?
    Thansk in advance
    John

  • A simple list menu(!)

    I’m trying to create a simple list menu that will load my .swf file is a scrolling panel. I have played about with Flash 8 a long time ago so im very rusty and getting myself in knots ….
    Here is my attempt can anyone help
    Thanks
    import fl.controls.List;
    import fl.data.DataProvider;
    import flash.net.navigateToURL;
    var defaultMainDisplay:URLRequest = new URLRequest("home.swf");
    // List box info
    var File_list:Array = [
    {label:"Home File", data:home.swf},
    {label:"File 1", data:swf\File1.swf},
    {label:"File 2", data:swf\File2.swf},
    {label:"File 3", data:swf\File3.swf},
    MyList.dataProvider = new DataProvider(File_list);
    MyList.allowMultipleSelection = true;
    MyList.addEventListener(Event.CHANGE, showData):void{
    // I want the selected (data) .swf file to be loaded into a ScrollPalette on the screen replacing the default home.swf
    removeChild(loader);
    var newMainDisplayRequest:URLRequest = new URLRequest(+ event.target.selectedItem.data);
    loader.load(newMainDisplayRequest);;
    addChild(loader);
    mainDisplay.loadMovie("home.swf");

    I thought I might bright it down a level with using frame levels, but without success AGAIN!....
    import fl.controls.List;
    import fl.data.DataProvider;
    var graphic:Array = [
    {label:"Home Page", data:"home"},
    {label:"About", data:"about"},
    {label:"Index", data:"index"},
    myList.dataProvider = new DataProvider(graphic);
    myList.allowMultipleSelection = false;
    myList.addEventListener(Event.CHANGE, showData);
    function showData (event:Event)
    { gotoAndStop (+ event.target.selectedItem.data);
    /// This should make it {gotoAndStop (home, about or index....);}

  • How can I PRINT a simple list (e.g., .txt or .doc) of my bookmarks?

    How can I PRINT a simple list (.txt or .doc) of my bookmarks?

    You can export your bookmarks to an HTML file by going to Bookmarks > Organize Bookmarks. From that window select Import/Export and then Export HTML...
    See [[Exporting bookmarks to an HTML file]].
    Once you have that file, open it in Firefox or a text editor and print from there.

  • How to get a clean simple listing of metatags

    I'm working on my sites SEO and it would be very helpful to
    get a list of all the <title> tags, all the Description tags,
    etc in a simple text format. For example, a human-readable site map
    gives a list of all the <title> tags, and I'd like that, but
    in a text file, for a choice of tags.
    With a bit of playing around with regular expressions, Find
    and Replace will generate a report, but the format is very messy.
    For SEO purposes this must be a common enough need, is there
    any way to do it? The super total completely wonderful dream
    utility would generate a .csv file with file name, <title>,
    Description etc in columns but any simple list would do the job.
    It's a big planet, billions of people, millions of websites
    ... the quest for the dream utility ... it must be there .. I'm
    sure of it ... anyone got any ideas where?
    Many thanks
    Andy

    Xenu will give you a list of the title tags -
    http://home.snafu.de/tilman/xenulink.html
    I'm not aware of a utility that will do the same for the meta
    descriptions.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "andy1342" <[email protected]> wrote in
    message
    news:g0s1ul$bqf$[email protected]..
    > I'm working on my sites SEO and it would be very helpful
    to get a list of
    > all
    > the <title> tags, all the Description tags, etc in
    a simple text format.
    > For
    > example, a human-readable site map gives a list of all
    the <title> tags,
    > and
    > I'd like that, but in a text file, for a choice of tags.
    >
    > With a bit of playing around with regular expressions,
    Find and Replace
    > will
    > generate a report, but the format is very messy.
    >
    > For SEO purposes this must be a common enough need, is
    there any way to
    > do
    > it? The super total completely wonderful dream utility
    would generate a
    > .csv
    > file with file name, <title>, Description etc in
    columns but any simple
    > list
    > would do the job.
    >
    > It's a big planet, billions of people, millions of
    websites ... the quest
    > for
    > the dream utility ... it must be there .. I'm sure of it
    ... anyone got
    > any
    > ideas where?
    >
    > Many thanks
    >
    > Andy
    >

  • [svn] 3246: Fix fasttrack bug SDK-16910 - Simple List populated with strings throws RTE .

    Revision: 3246
    Author: [email protected]
    Date: 2008-09-17 15:31:25 -0700 (Wed, 17 Sep 2008)
    Log Message:
    Fix fasttrack bug SDK-16910 - Simple List populated with strings throws RTE. This is fallout from the Group/DataGroup split. DefaultItemRenderer now uses a TextBox instead of a Group to show the list data.
    QE: Any List tests that depended on the default item renderer to support anything other than text must be updated.
    Bugs: SDK-16910
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16910
    http://bugs.adobe.com/jira/browse/SDK-16910
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/DefaultItemRenderer.mxml

    BTW, I do not experience the bug you had mentioned at
    http://www.cs.rit.edu/~cxb0025/flex/TreeControlBugs.html
    Can submit a video of my actions recorded

  • Email simple list with formating

    I wanted to email formated o/p of simple list..
    thanks

    Hope the below code helps you.
    *& Report  ZMUB_EMAIL_TEST                                             *
    REPORT  ZMUB_EMAIL_TEST                         .
    INCLUDE zmubinc_email.
    * DATA
    DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
    DATA : file_name TYPE string.
    data : path like PCFILE-PATH.
    data : extension(5) type c.
    data : name(100) type c.
    * SELECTION SCREEN
    PARAMETERS : receiver TYPE somlreci1-receiver lower case.
    PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
    * AT SELECTION SCREEN
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CLEAR p_file.
      CALL FUNCTION 'F4_FILENAME'
        IMPORTING
          file_name = p_file.
    * START-OF-SELECTION
    START-OF-SELECTION.
      PERFORM ml_customize USING 'Tst' 'Testing'.
      PERFORM ml_addrecp USING receiver 'U'.
      PERFORM upl.
      PERFORM doconv TABLES itab objbin.
      PERFORM ml_prepare USING 'X' extension name.
      PERFORM ml_dosend.
      SUBMIT rsconn01 WITH mode EQ 'INT' AND RETURN.
    * FORM
    FORM upl.
      file_name = p_file.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename                = file_name
          filetype                = 'BIN'
        TABLES
          data_tab                = itab
        EXCEPTIONS
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          OTHERS                  = 17.
        path = file_name.
        CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
          EXPORTING
            complete_filename = path
    *   CHECK_DOS_FORMAT =
          IMPORTING
    *   DRIVE =
            EXTENSION = extension
            NAME = name
    *   NAME_WITH_EXT =
    *   PATH =
          EXCEPTIONS
            INVALID_DRIVE = 1
            INVALID_EXTENSION = 2
            INVALID_NAME = 3
            INVALID_PATH = 4
            OTHERS = 5  .
    ENDFORM. "upl
    *&  Include           ZMUBINC_EMAIL                                    *
    * Data
    DATA: docdata LIKE sodocchgi1,
          objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
          objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
          objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
          objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
          objhex LIKE solix OCCURS 10 WITH HEADER LINE,
          reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
    DATA: tab_lines TYPE i,
          doc_size TYPE i,
          att_type LIKE soodk-objtp.
    DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
    * FORM
    FORM ml_customize USING objname objdesc.
    *----------- Clear Variables
      CLEAR docdata.
      REFRESH objpack.
      CLEAR objpack.
      REFRESH objhead.
      REFRESH objtxt.
      CLEAR objtxt.
      REFRESH objbin.
      CLEAR objbin.
      REFRESH objhex.
      CLEAR objhex.
      REFRESH reclist.
      CLEAR reclist.
      REFRESH listobject.
      CLEAR listobject.
      CLEAR tab_lines.
      CLEAR doc_size.
      CLEAR att_type.
    *  --------- Set Variables
      docdata-obj_name = objname.
      docdata-obj_descr = objdesc.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_addrecp USING preceiver prec_type.
      CLEAR reclist.
      reclist-receiver = preceiver.
      reclist-rec_type = prec_type.
      APPEND reclist.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_addtxt USING ptxt.
      CLEAR objtxt.
      objtxt = ptxt.
      APPEND objtxt.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_prepare USING bypassmemory whatatt_type whatname.
      IF bypassmemory = ''.
    *--------- Fetch List From Memory
        CALL FUNCTION 'LIST_FROM_MEMORY'
        TABLES
        listobject = listobject
        EXCEPTIONS
        OTHERS = 1.
        IF sy-subrc <> 0.
        MESSAGE ID '61' TYPE 'E' NUMBER '731'
        WITH 'LIST_FROM_MEMORY'.
        ENDIF.
        CALL FUNCTION 'TABLE_COMPRESS'
    *     IMPORTING
    *     COMPRESSED_SIZE =
        TABLES
        in = listobject
        out = objbin
        EXCEPTIONS
        OTHERS = 1
        IF sy-subrc <> 0.
        MESSAGE ID '61' TYPE 'E' NUMBER '731'
        WITH 'TABLE_COMPRESS'.
        ENDIF.
      ENDIF.
    * Header Data
    * Already Done Thru FM
    * Main Text
    * Already Done Thru FM
    * Packing Info For Text Data
      DESCRIBE TABLE objtxt LINES tab_lines.
      READ TABLE objtxt INDEX tab_lines.
      docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
      CLEAR objpack-transf_bin.
      objpack-head_start = 1.
      objpack-head_num = 0.
      objpack-body_start = 1.
      objpack-body_num = tab_lines.
      objpack-doc_type = 'TXT'.
      APPEND objpack.
    * Packing Info Attachment
      att_type = whatatt_type..
      DESCRIBE TABLE objbin LINES tab_lines.
      READ TABLE objbin INDEX tab_lines.
      objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
      objpack-transf_bin = 'X'.
      objpack-head_start = 1.
      objpack-head_num = 0.
      objpack-body_start = 1.
      objpack-body_num = tab_lines.
      objpack-doc_type = att_type.
      objpack-obj_name = 'ATTACHMENT'.
      objpack-obj_descr = whatname.
      APPEND objpack.
    * Receiver List
    * Already done thru fm
    ENDFORM. "ml_prepare
    * FORM
    FORM ml_dosend.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data = docdata
          put_in_outbox = 'X'
          commit_work = 'X' "used from rel. 6.10
    *   IMPORTING
    *   SENT_TO_ALL =
    *   NEW_OBJECT_ID =
        TABLES
          packing_list = objpack
          object_header = objhead
          contents_bin = objbin
          contents_txt = objtxt
    *   CONTENTS_HEX = objhex
    *   OBJECT_PARA =
    *   object_parb =
          receivers = reclist
          EXCEPTIONS
          too_many_receivers = 1
          document_not_sent = 2
          document_type_not_exist = 3
          operation_no_authorization = 4
          parameter_error = 5
          x_error = 6
          enqueue_error = 7
          OTHERS = 8  .
      IF sy-subrc <> 0.
        MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
        WITH docdata-obj_name.
      ENDIF.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_spooltopdf USING whatspoolid.
      DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
    *  -------------- Call Function
      CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
        EXPORTING
          src_spoolid = whatspoolid
        TABLES
          pdf = pdf
        EXCEPTIONS
          err_no_otf_spooljob = 1
          OTHERS = 12.
    *  ------------- Convert
      PERFORM doconv TABLES pdf objbin.
    ENDFORM. "ml_spooltopdf
    * FORM
    FORM doconv TABLES
      mypdf STRUCTURE tline
      outbin STRUCTURE solisti1.
    *  -------- Data
      DATA : pos TYPE i.
      DATA : len TYPE i.
    *  ------------ Loop And Put Data
      LOOP AT mypdf.
        pos = 255 - len.
        IF pos > 134. "length of pdf_table
        pos = 134.
        ENDIF.
        outbin+len = mypdf(pos).
        len = len + pos.
        IF len = 255. "length of out (contents_bin)
        APPEND outbin.
        CLEAR: outbin, len.
        IF pos < 134.
        outbin = mypdf+pos.
        len = 134 - pos.
        ENDIF.
        ENDIF.
      ENDLOOP.
      IF len > 0.
        APPEND outbin.
      ENDIF.
    ENDFORM. "doconv
    Above program fetches data from a file into internal
    table, format and send it in a mail.
    Instead you can directly use from the step after upload.
    Kind Regards
    Eswar

  • Plz help simple list formatttin issue

    hi all
    i have a simple list in which i have a header
    like
    profit       acknowledgement      quantity          data creation          data scheduling
    this header is acceding my page i am not able to take the print on a single page
    i want to convert it into
    profit       acknowle                    quantity          data                      data
                     dgment                                        creation                  scheduling
    plz tel me how to do it
    thanx in advance

    hi,
    try this
    hope it will b helpfull.
    FORM build_eve .
      DATA : wa_eve TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type     = 0
        IMPORTING
          et_events       = t_eve
        EXCEPTIONS
          list_type_wrong = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE t_eve WITH KEY name =  slis_ev_top_of_page INTO wa_eve.
      IF sy-subrc = 0.
        MOVE 'TOP_OF_PAGE' TO wa_eve-form.
        MODIFY t_eve FROM wa_eve INDEX sy-tabix.
      ENDIF.
    ENDFORM.                    " build_eve
    FORM header_build  USING  p_gt_list_top_of_page TYPE slis_t_listheader.
      DATA : year(4) TYPE c,
             mon(2) TYPE c,
             day(2) TYPE c,
             date(30) TYPE c.
      year = budat-low+0(4).
      mon = budat-low+4(2).
      day = budat-low+6(2).
      CONCATENATE day  mon  year INTO date SEPARATED BY '.'.
      CONCATENATE 'From' date 'To' INTO date SEPARATED BY space.
      IF budat-high IS INITIAL.
        budat-high = budat-low.
      ENDIF.
      year = budat-high+0(4).
      mon = budat-high+4(2).
      day = budat-high+6(2).
      CONCATENATE date  day INTO date SEPARATED BY space.
      CONCATENATE date  mon year INTO date SEPARATED BY '.'.
      SELECT SINGLE butxt INTO comp_nm FROM t001 WHERE bukrs = bukrs.
      CLEAR st_line.
      st_line-typ   = 'H'.
      st_line-info  = comp_nm.
      APPEND st_line TO p_gt_list_top_of_page.
      CLEAR st_line.
      st_line-typ   = 'S'.  "H-HEADER,S-SELECTION,A-APPLICATION
      st_line-info  = 'CREDIT NOTE REGISTER'.
      APPEND  st_line TO p_gt_list_top_of_page.
      IF budat IS NOT INITIAL.
        CLEAR st_line.
        st_line-typ   = 'S'.  "H-HEADER,S-SELECTION,A-APPLICATION
        st_line-info  = date.
        APPEND  st_line TO p_gt_list_top_of_page.
      ENDIF.
    ENDFORM.                    " HEADER_BUILD
    FORM top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = t_list_top_of_page.
    ENDFORM.                    "TOP_OF_PAGE

  • Issues with Simple Lists in service requests

    We are using Service Manager 2012 and have run into a problem with simple lists within the service requests we created.  We believe the issues started after we upgraded to Service Manager SP1 and Silverlight 5.1.  What happens is you can select
    one of the options in the simple list, but if you decide to change back to the original option, the system won't allow it.  In the case where there might be three options in the simple list (i.e. New, Change, Delete), you can select each one once, but
    if we try to change it back to any of the other options the system won't allow it.  We tested all of this before going live and everything was working, but just before we went live SP1 came out and so we elected to upgrade to it first.  We then needed
    to upgrade to Silverlight SP1 to work with Service Manager SP1.  We retested all of our service requests again just before going live, but didn't think we needed to go through every simple list so we didn't retest this.  Since then the simple lists
    are problematic.  Has anyone else experienced this and if so is there a fix that will correct this issue?

    Yes!
    We submitted a business impact statement back in February and after pushing them on a weekly basis, we finally received word that we will be receiving a hot fix next week.  Until we actually receive the hot fix and confirm that it works, I will wait
    to post another update on this.
    With that said, they came up with a temporary workaround about 2-3 weeks ago.  This is the message regarding the temporary fix that we received from the engineer that has been working on the issue:
    After doing code review I identified the regression was introduced in the binaries that are included as part of this Silverlight XAP file:
    RequestOfferingSilverlightModule.xap. As we discussed on the phone going back to the pre SP1 version means you will lose any enhancements/fixes that were introduced in SP1. Looking at the Change history for this module I only see two changes
    that were introduced in SP1 and those changes are as follows:
    The text field control only shows the first three lines.
    Hierarchical support for List Items in Portal
    To confirm my findings I replaced this XAP file with a pre SP1 version and I couldn’t repro the issue in my lab. I also confirmed implementing this module I lose the
    above fixes that were introduced in Sp1.
    To implement the workaround, please follow the below steps:
    Connect to the Web Content Server,  locate the following directory:
    C:\inetpub\wwwroot\System Center Service Manager Portal\ContentHost\Clientbin
    Rename the following file RequestOfferingSilverlightModule.xap
    to RequestOfferingSilverlightModule.xap.org
    Copy the attached file RequestOfferingSilverlightModule.xap to the folder:
    C:\inetpub\wwwroot\System Center Service Manager Portal\ContentHost\Clientbin
    Restart IIS by issuing the following command at the command prompt:
    iisreset
    Clear the client side cache and see if you can reproduce the issue.
    Once confirmed the issue doesn’t reproduce, please proceed with testing all scenarios that make use of the Self Service Portal.
    If you don't have the pre SP1 version of the file I'm sure you can get it from Microsoft.  We are not using hierarchical lists so the temporary fix is currently working for us without any issues.

  • Store TV preview files as simple list

    Hello to all,
    I have problem with listed items - that is, it is shown in thumbnails, so I have dozens of pages to list to find proper file!!
    Can I preview it as simple list??
    As I can see, everyone has its question, none got its answer.:-/

    I assume this is not possible but you can filter the multimedia files by media type.
    Use the MEDIA TYPE button to filter audio, video or picture files.

  • Simple list of HR openings via webdynpro

    Hi,
    I'm not an SAP developer myself, but I've worked closely with SAP in the past. Currently, I am working with a company that is posting job openings via the SAP e-recruiting/webdynpro application.  We are tasked with basically scraping and processing the job openings that are displayed and I am having trouble automatically retrieving the information from that page.
    As seems to be standard (based on searches, this seems to be a common job search page), the page is of the format:
    /sap/bc/webdynpro/sap/hrrcf_a_unreg_job_search/
    Typically, this page presents a search page with several options and a submit button.  When clicked, it takes the user to another page with a page of results. That page seems to work through a series of Ajax postbacks and contextual ID's that need to be tracked and makes the scraping extremely complicated.  Getting to just a simple list of available jobs involves a lot of juggling and requests, and then getting from a job entry in the list to the job itself requires more hurdles.
    I'm just trying to find out from an SAP expert if there are any other standard hrrcf applications that exist in SAP that will simply list out the various jobs without having to do this complicated search.  My best case would be if there was a page that simply dumped out a bunch of XML/JSON as a list, something like:
    /sap/bc/webdynpro/sap/hrrcf_post_lst  (or whatever)
    As I said, I've been working with the other company but they don't seem to understand or be able to contact the correct people internally who can help, so I'm trying to reach out to this forum to see if someone else can give me more information I can take back to them.  Any help would be appreciated, including brainstorming about other possible options.  We have several clients asking us to scrape their SAP sites which are set up exactly the same, so a general solution would be great.
    Thanks!
    Diamond
    ps if this is not the right forum, please let me know.

    Thanks for your information, but I fear I was unclear.
    I am not interested in the difference between internal versus external jobs, or published versus not published.  I am interested in displaying the same external published jobs that are displayed typically via the search form:
    /sap/bc/webdynpro/sap/hrrcf_a_unreg_job_search/
    However, I am trying to discover if there is another different, distinct web form that will simply display the same jobs but displayed using a simpler interface.  So, basically, is there any other default application form that displays the contents of the T77RCF_EXT_PUB table, but does it as a list and not through a complicated search form?
    Or alternately, if there is any kind of RSS or XML data feed I can access that would hit T77RCF_EXT_PUB.  Again, I am looking for information that I can take back to my client to help them activate or configure whatever is needed.
    I hope that makes sense, and I hope that this is the right forum. 
    Chris

  • Trying to do a simple List

    I have just inherited Siebel On Demand in my Sales Unit after Integration with another company. All my accounts and previous contact activity is held in SOD.
    I am trying to create what I thought would be a simple List but am failing miserably.
    I just want to see a list of accounts that have not had any completed contact activity in the last 3 months.
    All activity is either an appointment or a task.
    This is driving me mad please help!
    Edited by: 870163 on 04-Jul-2011 12:45

    If you can access your ftp server via any ftp client like Filezilla then you will be able to list directories via ColdFusion as well. Share the stack trace as well.
    Sample Code
    <cfftp 
         port="21"
        action = "open"
        username = "username"
        connection = "ftp"
        password = "password"
        server = "abc.xyz.com"
        stopOnError = "Yes">
    <!--- Confirmation of Open --->   
    <cfoutput> Connection Open :#cfftp.succeeded# </cfoutput>
    <p>List the files in a directory:
    <cfftp
    action = "LISTDIR"
        stopOnError = "Yes"
        name = "ListFiles"
        directory = "/"
        connection = "ftp">
        <cfdump var="#ListFiles#">
    <cfftp
    action="close"
    connection="ftp"
    stopOnError = "Yes">
            <!--- Confirmation of Close --->   
    <cfoutput> Connection Closed :#cfftp.succeeded# </cfoutput>
    HTH
    Thanks
    VJ

Maybe you are looking for