Simple Maintaince and Expert mode.

Hi gurus,
I am currently on Om project.
1)I want to know difference between the Simple Maintaince and Expert mode.
2) Organisational and staffing screen is in which one simple or expert mode.
3) can u tell me how to make the structures by both methods and what transactions will be used.
4) what it means by expert mode edits the characterstics of objects and use infotypes how?
preeti

Hi Preethi,
Simple maintainence is an easy way to maintain the org structure.
An org structure can be created, maintained or displayed by any of the following methods.
Organization and Staffing , General Structures ,Expert mode or Simple maintainence.
T- Codes for
Organization and Staffing :
Create PPOCE , Change/Maintain : PPOME , Display PPOSE.
General Structures :
Create :PPSC , Change :PPSM , Display : PPSS
Expert mode :
PO10 : Org Unit
PO03 : Job
PO13 : Position
PO01 : Work Center
PFCT : Task Catalog
PP01 : General
Simple Maintainence :
Create : PPOC_OLD
Change : PPOM_OLD
Display : PPOS_OLD
In Org and Staffing and Simple maintainance You could create all the objects(S,P,O,C,K) from a single screen and maintain relationships between those objects.
In Expert Mode : Specific transactions are used to create diff object types .Here you could find the OM infotypes .
There is much more to say butto begin with you could use these transactions and explore .
Please feel free to ask any more questions.
Thanks,
Aastha

Similar Messages

Difference between Simple maintanence and Export mode and Organisation plan

Hi all,
Can any one please explain the difference between Simple maintanence and Export mode and organisational plan in SAP easy access.
Thanks & Regards,
Naga

Expert Mode Infotype Maintenance: This interfaces allows you to edit individually selected objects in OM (Org Units, Positions, Jobs) via infotypes.
Expert Mode: Simple Maintenance Interface (PPOM_OLD) is used to quickly create a new Organizational Plan. As a user, you can pretty much maintain large volumes of data very easily ( i.e create several objects simultaneously), without having to go through the more "Performance Intensive" Org and Staffing interface.
In accessing the Simple Maintenance interface to create your org structure, the initial screen requires you to specify which evaluation path you want to create your org structure.
Organizational Plan: This is what provides you with a complete picture of an enterprise's environment. It comprises elements (objects like Org Units, Positions, Jobs etc) which are used as building blocks for creating an Organizational structure.
Need more information? Let me know.

Difference between "change auth data " and "expert mode" in pfcg

Gurus ,
i need to know , what is the difference between
"change authorization data "
and
"expert mode for profile generation" in PFCG .
and what is the significance of the three options that we get when we choose expert mode ?

Hi Susin,
To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation.
If you are generating the profile for the first time, there is no difference between the two modes.
When you change a role, you must regenerate the authorization profile. In this case, the status of the profile generation is displayed red or yellow at the top of the Authorizations tab page.
If the status display is red, you must perform an authorization data comparison, since the menu was changed since the last profile generation or no authorization data exists.
If the display is yellow, the authorization data for the role was changed and saved after the last generation. The generated profile is no longer current. You need to regenerate it.
The significance of the three options that we get when we choose expert mode is as follows:
Choose one of the options to maintain the authorization values (in normal mode, the correct option is automatically set):
1> Delete and recreate profile and authorizations
All authorizations are recreated. Values which had previously been maintained, changed or entered manually are lost. Only the maintained values for organizational levels remain.
2> Edit old status
The last saved authorization data for the role is displayed. This is not useful, if transactions in the role menu have been changed.
3> Read old status and compare with new data
If you change transactions in the role menu, this option is the preconfigured. The profile generator compares the existing authorization data with the authorization default values for the menu transactions. If new authorizations are added during this process, they receive the status New. Authorizations that already existed receive the status Old.
Note the following during the comparison:
Values for organizational levels that are no longer required are deleted, all others are retained. If new organizational levels are added, you need to maintain them.
The standard authorization for the object S_TCODE is always automatically filled with the current transactions from the role menu. It cannot be copied or manually changed, only deactivated.
Thanks,
Saby..

Difference between config in administration mode and expert mode

Hi,
We can make changes to FPM-based component configuration via administration mode (SE80, menu bar Web Dynpro Configuration > test > Execute in Administration Mode) or expert mode (user parameter FPM_CONFIG_EXPERT = X), to, for example, add a new tab (main view) to a sap standard application (after enhancing the sap std component config).
I understand that in expert mode any changes are regarded by the system as modifications (as opposed to customisation with administration mode) and hence these modifications could be overwritten by future support pack application. Correct?
Is there any advantage to using expert mode over administration mode, given that expert mode config could be overwritten?
Thanks in advance,
JP.

Hey Baskaran,
Thanks for your reply and further info, I appreciate the dialog between us on this, it helps me and I hope it helps others, as I know from personal experience today that some SAP developers themselves are not clear on the diffrerence.
With regard to your comment "In both ways the modifications are not lost or overwritten" I quote from the fuller explanation on "Fitting Webdynpro..." I posted earlier in this thread, with the excerpt "Changes made in expert mode are modifications that are overwritten when a new release or enhancement package is imported. Expert mode allows configuration for an application to be launched from that application." of particular interest:
"The concrete layout of a Web Dynpro application is determined by the application configuration and the configurations of the embedded Web Dynpro components. These configurations can be adjusted or changed at any time. Floorplan Manager uses the concepts for changing Web Dynpro applications that have been prepared by Web Dynpro ABAP:
Changes to the Web Dynpro built-in and component-defined configurations are stored in administrator mode as delta information in the Customizing layer of Web Dynpro ABAP. Changes in administrator mode are modification-free changes. This is because when a new release or enhancement package is imported, only the Web Dynpro development layer is affected.
In expert mode, changes to the component-defined configurations are stored directly in the Web Dynpro ABAP development layer. Changes made in expert mode are modifications that are overwritten when a new release or enhancement package is imported. Expert mode allows configuration for an application to be launched from that application.
The configuration editor for Floorplan Manager is available to you for making changes. This editor can be launched in the Web Dynpro Explorer or from the runtime of the application. For more information, see Calling Up a the Configuration Editor."

Substitution problem in VO with viewlink and not in expert mode

Hi All
i have to extend a VO ,standar VO is not in expert mode so i made it and then extended the VO(need to add two new date columns) and substituted the BC4j ,i was involved in this discussion also
Re: Substitute ViewObject. Urgent!!!!! Thank you
,and i was aware that viewlinks should take care by substituion itself ,but in my case it is creating problem ,first it has thrown the error given below
oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value PoRequisitionLinesVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
then i modified the VOExRowImpl and added the viewlink setter getter from seede Rowimpl ,now it it not throwing the InvalidParamException ,but throwin OAAttrValException saying get method for LineNum is not resolved ,now i m puzzeled what is going on ,i m sure i have not made any mistake in substitution, any clue would be very helpful for me ,please throw some light on this issue
thanx
Pratap

thanx kumar, nice to see your reply.
basic requirement is i have to create two date fileds on the requsition line form ,it shud appear on the basis of selected value in a field of same row ,so i set PPR ,initially i bounded these fields with spared attributes of VO but it was creating problem after page refresh ,i have raised the issue in the forum
Date value format is changed itself after page refresh
raised a tar with oracle ,issue was that these attributes are varchar type and used for the date fields, thats y creating the problem after page refresh ,VO extension didnt work bcz these attributes are already there in seeded VO with there data type, so they can not be changed in VO extension,oracle suggested create two columns with date type in the seeded table itself and use them in VO extension , i did it ,now the problem is
i have extended the VO ,and this problem came ,one thing i m not sure is
since i have added two new columns ,shud i do EO extension (i did it ) and then VO extension ,if yes then how bcz when i will move all the files from server they are all standard files and ,extended VO is getting the reference of seeded VO which is using the seeded EO not the extended EO .
so what approch or steps shuld i follow to add this newly added column in VO .
thanx
Pratap

Expert mode query in View objects and appended where clause

My company is Oracle Member Partner and we are developing enterprise web applications using Oracle database and BC4J.
I have the following problem...
When I enable EXPERT MODE option in View Object I have trouble appending to query statement in my client code.
I need expert mode because I must use "SELECT DISTINCT" insted of "SELECT" in my query.
It looks something like this:
viewObject.setWhereClause("CLA_ID = " + claId);
viewObject.executeQuery();
SQL query from View Object becomes sub-query and fails to execute:
select * from (original view object query) where (... appended where clause)
Order by part of the query causes sql errors because original query is now sub-query.
Is there any way around this?

I tried creating an expert mode SQL query:
SELECT DISTINCT EMPNO, ENAME FROM EMP.
Then at runtime I do:
vo.setWhereClause("ENAME LIKE '%'||?||'%');
vo.setWhereClauseParam(0,'A');.
and this works fine. The trick is that since expert-mode view objects get wrapped as inline views (to allow runtime appending of WHERE clause, actually), you need to select any column in the select statement to which you want to later refer in a dynamically-appended where clause.
If you want to prevent the inline-view wrapping, you can write the following code in your view object's ViewObjectImpl subclass to force the VO to NOT be treated as an expert-mode SQL VO.
// Goes in your view object impl subclass
public void create() {
     // Force this VO to NOT be treated as an expert-mode SQL, so that
     // its query does not get wrapped as an inline view.
     getViewDef().setFullSql(false);
}I used this trick above to create an expert mode query like:
SELECT DISTINCT deptno FROM empand then at runtime I add a dynamic where clause that refers to a column
in EMP that is not in the select list like this:
    ViewObject vo = am.findViewObject("View1");
    vo.setWhereClause("ename like '%A%'");
    vo.executeQuery();
    System.out.println(vo.first().getAttribute(0));and this causes the query to come out as:
SELECT DISTINCT deptno FROM emp WHERE ename like '%A%'.
instead of:
SELECT * FROM (SELECT DISTINCT deptno FROM emp) QRSLT WHERE ename like '%A%'which would cause an error due to the fact that ename is not in the select list of the original (wrapped, inline) query.

Working in Expert mode, with Layers, somehow locked up the first layer by using the eyedropper, and can't undo it. Now, when I go to Expert mode, this one layer shows up, with the tool still showing, and I can't even begin to edit a new photo, or get the

Working with Elements 12, in Expert mode, with the first layer, I did something to lock up the whole Expert mode. I can't get rid of the eyedropper tool, or cancel the layer I started. Now, when I put in a new image to edit, I can't even get the normal Expert editing dialogue that normally appears on the right side of the screen. Can you help me?

Oh and to add, when I downloaded the skype app onto my dad's air...I got a notification to my personal yahoo mail, it says:
Dear My Dad's Name ----------- weird because it's my email address
Your Apple ID, *my dad's apple id* was just used to download Skype for iPad from the App Store on a computer or device that had previously been associated with that Apple ID.
I'm guessing his apple ID is linked to my email address...however, when we checked his personal gmail account, he got the same email..

How to Set Distinct SQL Clause on View Object without using Expert Mode.

Hi to all Actually i have a View Object usign 3 entities
if i use expert mode in my VO, it generate
QRSLT WHERE
instruction and force to include all columns on my dynamic where clause on select statement i can't include columns because get me duplicate rows
How i can include disctinct clause without usign expert mode or any other solution?
Note that in normal mode without expert mode QRSLT WHERE is not generate and all work fine
For example
select * ( select id , name from table) QRSLT WHERE loc = ..
if i use expert mode it generate QRSLT WHERE and if loc is not predicated colums get me and error :
( ORA-00904: invalid identifier )
in simple mode of View Object all work fine..
Any suggestion on It will be appreciate.....
Tnx

My problem is that when use expert mode
it's change simple select statement for a select that use
select * from (select column....)
qrslt WHERE (column=somevalue)
this kind of select force me to include all where conditions of qrslt on my select columns and this get duplicate rows
thats beacuse i need include distinct without use expert mode
Anny Help on this?

Service Desk Expert Mode

Hello,
When I try to get into the expert mode in service mesage,
Nothing happens
I tried to check if there is a autorization issue but all permission are given to the message processor
With some users I can access and with others I can only acces when I open directly in expert mode (not workin when switching from web to expert mode)
Do you have an idea how this could be fixed ?
Thanks in advance
Patrick

Hello,
Thanks for your reply.
Unfortunately the note cannot be implemented.
Yes it could be a authorization issue, but nothing relevant in su53 and no message.
I gave all the rights to the standard message processor rôles but still nothing new
Is the Expert mode not intended for message processors ?
Thanks in avdvance

Normal Mode vs Expert Mode

Today I have found something really weird, that I would like to know if anyone knows the reason.
I have a programmatic View Object with a transient attribute rendered as an InputListOfValues. This attribute has a related read-only View Obect which displays the LOV content. A few days ago I disabled the Application Module's pool in order to test the passivation, and since then everytime I opened the LOV, selected a row and clicked on the OK button I got this error:
SQL error during statement preparation. Statement: SELECT SupVendors.VENDOR_CODE, SupVendors.VENDOR_NAME, SupVendorsPerDonorCenter.DONOR_CENTER_ID, SupVendorsPerDonorCenter.ROWID, SupVendorsPerDonorCenter.VENDOR_CODE AS VENDOR_CODE1 FROM SUP_VENDORS SupVendors, SUP_VENDORS_PER_DONOR_CENTER SupVendorsPerDonorCenter WHERE (SupVendors.VENDOR_CODE = :fbkKy__0)
For an unkown reason, when copying the selected row's values to the programmatic VO, ADF replaced the original name of the bind variable in the query for this "fbkKy__0". Plus, the where clause has another condition before the bind variable's one, which does not appear in the error message. I wasn't able to understand why this happened so I checked everything in both programmatic and LOV ViewObjects, but everything was fine. Today I have noticed that the LOV VO had the query in Normal mode (which is OK, or at least it should) and I have switched it to Expert Mode, just to try something different. Well, the fact is that this has automatically solved the problem and now the LOV is working fine again! And if I set it back to Normal Mode, it crashes again.
How can the query's editing mode can have any effect in runtime? I have to suppose this has some relation to the disabled pool and the passivation I am testing, but I cannot figure out why. Does anyone know what's happening?
Thank you in advance!

I have been doing some testing in a dummy application, and I can say this happens with any kind of View Object (it does not need to be programmatic, and the LOV attribute can be entity based) in both forms and tables. The only conditions are to disable the Application Module's pool and that the LOV's query includes a bind variable. Oh, and I forgot to say that I am working with JDeveloper 11.1.1.2.

Elements 12 on Windows 7 Pro 64 Bit - Quick and Guided Modes do not work?

I have tried to upload the software many times with no help. I also have Elements 11 on the same computer and it works very well. I do not understand why 12 will not work. Since I first installed 12 I have been using it in the Expert mode which seems to work. I have triled all of the suggestions found with no help.

Hi,
Please try the below steps:
Right click on the PSE icon.
Select the option Run as admin.
open the editor .
Check is it working fine now.
Also, try to reset the preferences of editor, refer the below link to do so.
http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences

Issue with VO extension in expert mode unchecked

hello
i ma try to extend a VO which having Expert Mode Uncheck and Vo is EO base d
is it possible to extend that VO
regards
Vivek

Hi,
You can do it through personalization. Open that page and click on about this page link which is in the bottom left corner of the page and inside this search for the VO and after getting the exact VO, Click on it.
You will get the whole query of this.
If you can't find about this page link on the page then you have to activate a profile option i.e. FND:Diagnostic=> "Yes"
Thanks
--Anil

View Link with destination VO in expert mode

I have view link with the destination View Object in expert mode for applying a custom query.
The view link doesn't run nicely because it seems to never find the right table.
Does anyone manage to create this kind of view link based on a custom query in the destination VO?
Thanks
Olivier.

Hi,
I had also the same problem, I needed to query two tables which are in a Master-Detail relationship, the only way to do this is to write a new bean, extendind the FindForm bean to make a query like this:
select * from mastertable where condition4mt and pk_mastertable in ( select fk_pk_mastertable from detailtable where condition4dt)
So after this you get a pointer in the master table, but your condition to the detailtable is not considered from the ViewCurrentRecord Bean. I didn't go further to extend the ViewcurrentRecord bean, because this solved my problem, besides I think it would be also very difficult.
JDevTEAM !!! are you planing to solve this king of problem ???
I know that I can force the VO.setWhereClause() to force some condition on the detail, but are you planing to extend the ViewCurrentRecord bean to have also a master-detail view with a restriction also on the detail table ???
TIA,
Seb.

How do I get Elements 11 to always open in Expert mode?

Does anyone know how I can make Elements 11 always open in Expert mode?
I'd like Elements 11 to do this whenever I either double-click a photo file to start the program or click the Elements 11 icon to start.
Thanks for your help and time.
Jerry

Barbara B.,
I have more information that will help explain my problem:
When I double-click on a supported photo file (.jpg for example) in Windows Explorer, Elements 11 opens in the Expert Window (the mode is always use) but the photo does not appear.
I double-click the photo file again in Explorer and Elements 11 changes to the Quick window and the photo opens.
In previous Elements versions I could double-click a photo file and Elements would open and the photo would appear in the open Elements window. With Elements 11 the photo never appears until I double-click the file again. And when the photo opens it does so in the Quick screen.
How can I make Elements 11 open after double-clicking a file with the selected photo visible and be in Expert mode?
Thanks for your help and time.
Jerry

How can I get Photoshop Elements 13 to start up in Expert Mode?

I just upgraded to Photoshop Elements 13 for Windows (I was using Photoshop Elements 12 for Windows), and I can't get it to start up in Expert mode. When I exit in Expert mode and restart, it starts in Expert mode and then after a few seconds it reverts to Quick mode.
Note that I have tried the recommendation from previous versions of "Reset preferences on next launch" and that didn't help.
I'm running 64-bit Windows 8.1 and Photoshop Elements version 13.0 (20140831.m.62014) x64, and I've set it to start in the image editor, not in the launch window.
Thanks for your help.

Can you try renaming the %APPDATA%\Adobe\Photoshop Elements\13.0 folder and see if it helps.
Thanks,
Anwesha

Simple Maintaince and Expert mode.

Similar Messages

Maybe you are looking for