Simple Odd question

Hi All,
When you are creating an asset (as01), in the Origin Tab, there are two indicators.
1 = Asset purchased new
2 = Asset purchased used
Is there is any way that we can make it like it will be mandatory for a user to check on one of these two indicator, if the user is creating a new asset?
Current functionality allows a user the following option when creating an asset
1 = Either check the indicator (asset purchased new) -- Structure = XNEU_AM
2 = Either check the indicator (asset purchased old) --- Structure = XGBR_AM
3 = Not check any of the above indicators and still create asset master record.
Again, my question is, can we somehow make the above mentioned # 3 option to be as a new option which is like
4 = Either check option # 1 or check option # 2, otherwise the user is unable to proceed to create the asset master record ???
I am thinking it has something to do with ABAP developers. Because I check the field status for Origin tab in the configuration, and it does not metion anything about supress/optional/required about the above mentioned indicators.
Any suggestions???
Thanks,
Rob

Hi,
make field ANLA-LIFNR obligatory
-> than you must fill XNEU or XGBR
A.

Similar Messages

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Just a suggestion..........
Download Thunderbird. Easier to use when it comes to what you want to do w/your emails.

4 Simple Flash Questions that Are Stumping Me!

What is the Frame Rate for Web Animations
Q1. I am making an animation which will be played on the web. What is the default frame rate (fps) of Flash CS5? And what is the frame rate of for web?
Q2. My animation needs to be 30 seconds long. So at 15 fps that would mean I need to use 600 frames in Flash?
How Do I Mask everything so all I see is the Content on the Stage?
I have a wide image that extends past my movies stage size so when I preview my movie the image is visible. How do I mask out anything that extends past my movies window size? I believe I can create a layer named "mask" and place it above all other layers, but I forget how to make the mask. Any help is appreciated.
How to Fade a Graphic
I have a graphic element (some type) and I want it to fade from 0% to 100%. In older versions of Flash I could just select the symbol and then set it's alpha value to 0%, move a few keyframes and then set the alpha to 100%. Voila! but now it doesn't seem to work that way. How can I do this in CS5?

Ned, it says 24 fps which means there is 24 frames per second so each 24 frames is 1 second.
Date: Fri, 4 Nov 2011 05:35:16 -0600
From: [email protected]
To: [email protected]
Subject: 4 Simple Flash Questions that Are Stumping Me!
    Re: 4 Simple Flash Questions that Are Stumping Me!
    created by Ned Murphy in Flash Pro - General - View the full discussion
1 You can create your character as a movieclip and copy/paste that movieclip from one file to another. 2. One way to create a movieclip is to copy all the frame of the animation's timeline (select them all, right click the selection, choose Copy Frames), then create a new movieclip symbol (Insert -> New Symbol...etc) right click on its only keyframe and chhose Paste Frames. THat will put all the layers and frames you copied into the movieclip The only way to come close to being certain about the timing of you animation is to use code to keep track of the time, something like getTimer().. The frame rate that a file plays at is not a reliable means of dictating the time it takes due to a variety of factors which include the amount of content you are trying to process and performance limits of the user's machine.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4007420#4007420
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4007420#4007420. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Simple performance question

Simple performance question. the simplest way possible, assume
I have a int[][][][][] matrix, and a boolean add. The array is several dimensions long.
When add is true, I must add a constant value to each element in the array.
When add is false, I must subtract a constant value to each element in the array.
Assume this is very hot code, i.e. it is called very often. How expensive is the condition checking? I present the two scenarios.
private void process(){
for (int i=0;i<dimension1;i++)
for (int ii=0;ii<dimension1;ii++)
for (int iii=0;iii<dimension1;iii++)
    for (int iiii=0;iiii<dimension1;iiii++)
         if (add)
         matrix[i][ii][iii][...] += constant;
         else
         matrix[i][ii][iii][...] -= constant;
private void process(){
if (add)
for (int i=0;i<dimension1;i++)
for (int ii=0;ii<dimension1;ii++)
for (int iii=0;iii<dimension1;iii++)
    for (int iiii=0;iiii<dimension1;iiii++)
         matrix[i][ii][iii][...] += constant;
else
for (int i=0;i<dimension1;i++)
for (int ii=0;ii<dimension1;ii++)
for (int iii=0;iii<dimension1;iii++)
    for (int iiii=0;iiii<dimension1;iiii++)
       matrix[i][ii][iii][...] -= constant;
}Is the second scenario worth a significant performance boost? Without understanding how the compilers generates executable code, it seems that in the first case, n^d conditions are checked, whereas in the second, only 1. It is however, less elegant, but I am willing to do it for a significant improvement.

erjoalgo wrote:
I guess my real question is, will the compiler optimize the condition check out when it realizes the boolean value will not change through these iterations, and if it does not, is it worth doing that micro optimization?Almost certainly not; the main reason being that
matrix[i][ii][iii][...] +/-= constantis liable to take many times longer than the condition check, and you can't avoid it. That said, Mel's suggestion is probably the best.
but I will follow amickr advice and not worry about it.Good idea. Saves you getting flamed with all the quotes about premature optimization.
Winston

Odd question

This is kind of an odd question.
We have a webcam that we would like to stream video to. We have the wiring in, and it runs into our network. The problem is that the network is rather complicated and for some reason the signal from the web camera is getting lost. We need to know if it is an issue with the camera itself or with the network.
And I was thinking to myself, here we also have this verizon netbook with mobile broadband. If I could plug the webcam / ethernet system into the netbook and could get an internet signal, then I would know the problems we are having are an issue with the network and not the camera. At which point the solution would be to just get a second independent fios line.
So the question is this... is there any way to treat the netbook kind of like a router. Plug an ethernet cable in, install some software, forward a couple of ports and that is pretty much it. It really doesn't matter if it runs slow or not, because this is just about testing some systems.
Thanks

Using the netbook for the configuration you are requesting is not supported. Only hotspot devices support a similar setup to a router. Examples of these devices would be the following:
HTC Droid Incredible
Motorola Droid 2
Motorola Droid R2D2
Motorola Droid X
Palm Pixi
Palm Pre
Samsung Fascinate
MiFi 2200 Intelligent Hotspot

A few simple Logic questions...please help.

I have a few probably simple Logic questions, that are nonetheless frustrating me, wondering if someone could help me out.
1. I run Logic 8, all of the sounds that came with logic seem to work except organ sounds. I can't trigger any organ sounds (MIDI) on Logic, they won't play. I have a Yamaha Motif as my midi controller.
Any idea why?
2. I've starting running into a situation where I will record a MIDI track, the notes are recorded but they won't playback. The only track effected is the one that was just recorded. All other midi tracks playback.
I have to cut the track, usually go out of Logic and back in, re record for it to playback properly. Any idea why this may be happening?
3. How important is it to update to Logic 9. Are there any disadvantages down the road if I don't upgrade. If I purchase the $200 upgrade, do I get a package of discs and material, or it just a web download.
Any help is appreciated!
Colin

seeren wrote:
Data Stream Studio wrote:
3) You get a full set of disks and manuals.
They're including manuals now?
I think his referring to the booklets ...on how to install etc
It would be great to see printed manuals though ...I love books especially Logic/Audio related !!
A

Bit Of An Odd Question.

Hi Everyone, I have a bit of an odd question but my friend gave me his old version of photoshop cs5 with the product key i was wondering if i could register it under my name at all?

If that copy has been used in any upgrade path, then it is no longer valid.
Also, Adobe has paperwork, that must be filled out, to transfer ownership of valid licenses. I would have your friend complete that paperwork for the gifted copy. Adobe Customer Support can get them the necessary paperwork. Once, that transfer could be done via FAX, but not sure what the process might be now.
Good luck,
Hunt

Odd question: retrieving a serial number

This is an odd question, and I can't find anywhere appropriate to ask it. Is there any way I can look up the Apple products that are registered to me? I had a MacBook stolen last week, and I need the serial number to report to the police on the odd chance that they find it. I can't seem to find the serial number anywhere in my files. Can I get that info from Apple? If so, how?

Try calling Apple for that info. I don't know of any place on their website that you can retrieve that information.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Simple Quick Question

wrong section, post was moved.
Message was edited by:
Rob17

you titled "simple quick question"...
.. complicated to answer..
a) the TermsOfUse of the iTS don't allow any processing of purchased files, these are "copy protected"..
b) iM has a voice-over function..
c) iM is a video-edit app.. easy to use... just learn to handle it...
d) iM allows to "extract" audio (=muting the original audio, adding your own..)
e) to learn iM, spend some time here: http://www.apple.com/ilife/tutorials/imovie/index.html
f) use pencil and paper first! WRITE and scribble, what shall happen when in your movie/parody... make a script, draw a storyboard .. THEN launch iM.. in other words: think first, then edit.. iM is just a tool, it does not "create"... Picasso needed a papertowel and half a stencil to create art....
g) to get comfortable with iM, start with your own, small, short (3min!) project... import some stills, edit them, add a funny voice-over, add sounds, add music... good? make a bigger one...
h) .. in our Lecture II, we teach you how to import shows from TV, youtube, wherever..
standard disclaimer:
be nice to ©opyrights ...

Simple query question

hi all,
I have a XMLType table with one column - I have presently one row, in my column xmlsitedata I have stored one large xml file.The schema definition is given below:
<?xml version="1.0" encoding="UTF-8" ?>
- <xs:schema elementFormDefault="qualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
- <xs:element name="siteList">
- <xs:complexType>
- <xs:sequence>
<xs:element name="site" type="siteType" minOccurs="0" maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
</xs:element>
- <xs:complexType name="siteType">
- <xs:sequence>
<xs:element name="nameEn" type="xs:string" />
<xs:element name="nameFr" type="xs:string" />
</xs:sequence>
<xs:attribute name="code" type="xs:string" />
</xs:complexType>
</xs:schema>
I have executed the query below:
select x.XMLSITEDATA.extract('/siteList/site/nameEn/text()').getCLOBVal() "stName" from wsitelist x;
and I get all english names of some 200 locations, however, there is 1 row selected and all names show up on one row. How do I split them into 200 or whatever rows?
Thanks,
Kowalsky

Have a look at the answer provided in the following thread.
very simple XML question
This may solve your problem.
use xmlsequence.
Alvinder

Simple Report Question

Post Author: scott123
CA Forum: General
I want to take the information in a simple excel table and recreate it 3 times, each time sorting/grouping on a different columnHere is the tableAnd here is the report that I'm trying to generate (first sorted by name, alphabetically, then grouped by rank, then grouped by size) I'm comfortable working with excel tables in Crystal, but I'm running into a problem repeating the information and then sorting each group separately. I also have no problem doing each group in a single report (without repeating any records), but I'd like to include all 3 groups in a single report. My apologies for how remedial this question is- I thought for sure that Crystal could do this easily but I've spent a couple of days on this and am running into a brick wall.

Post Author: pandabear
CA Forum: General
That's right Scott, and maybe make them "on demand"
sub reports so the user only has to see the data they
really want at the moment. Gives the report a nice clean look too.
PB

A simple security question

I'm trying to write a simple self-signed applet that use a jca provider but thi exception "java.security.SecurityPermission putProviderProperty.BC" is thrown. if I use a policy file, it works fine but for a beginner user is not very useful intall a new policy file.
After this I tried to write a new self-signed applet that read a file and open a ServerSocket on port 21, and it work fine without a new policy file!
My question is this: why is needed a policy file to add a provider and not to open a ServerSoket or read/write a file???????
PS
if u have an idea to resolve my problem without a policy file, tell me pls!!! IT'S URGENT!!

An applet works out of a so-called sandbox. The security restrictions can be overcome in one of two ways that you have tried:
1) by the use of a policy file, or
2) by signing the applet
So, to answer your question:
My question is this: why is needed a policy file to add a provider and not to open a ServerSoket or read/write a file???????Since the applet is signed, there is no need for a policy file......if you tried to access the socket without signing the applet, you'll get the security exception!
;o)
V.V.

A somewhat simple security question......

If a mac running macosx has two separate user accounts, lets say one admin and the other a standard user, or both admins or both standard users.....
Is it possible for a hacked/penetrated account on one of the users to affect or read any info from the other user on the same machine ?
What application is in question; Safari lets say.....

FLUIDNYC wrote:
So, disable all scripts and uninstall all plugins from the browser.
No java, No javascript, No plugins like flash, java, shockwave, quicktime, or adobe crap.
So, no functionality. What about that java applet I need to run 10 hours a day. Do you think I should go out of business over it? Or all my QT movies? Or, deprive myself of Flash, so I can't view the content of websites?
So, lets say you browse www.thissiteisinfected.com and have everything uninstalled (see above), and your smart enough to browse the web using a "STANDARD" user account and not the "ADMIN" user account.
Running from a standard user buys you nothing and adds additional steps. If you want to download an app, before you install, you will get a dialog warn you "XXXX is an application you downloaded from the internet..." So, you still have to authenticate. And what about *all the apps that need no authentication to install?*
You tell me how this website will inject crap into your MAC with the settings above???
There is no way to FORCE CODE into your browser if everything is disabled.
Tell me how it can "inject crap" into my "Mac" admin without my complicity.
I have bumped into a rouge antivirus website while on my macbook using safari.
All of a sudden a popup stated i had spyware, i could'nt close the box/window, I had to do a FORCE QUIT on SAFARI to get out of that page. It pretty much hijacked SAFARI.
This is nothing that can harm you. It is annoying having to force quit over it, but that is all.
My safari download settings place things on my desktop, sure enuff, there was a .EXE file sitting on my macbooks desktop.
Sure enough, your Mac can't do a thing with it.
NOTHING IS BULLETPROOF.
I agree but there are simpler ways to plant a rootkit you overlook, that have nothing to do admin accounts or ports. *The question is, who would want to?* Even if a black hat is randomly hunting for bank account numbers, social security numbers, credit card numbers, etc. he would pass up a UNIX based system with good protections in place for an easier target.
In short, in a home environment, I could never recommend running from a standard user. Especially if they are on a router and/or using OS X firewall. (The exception being if you have kids and want to use parental controls.) I have no idea how this mantra about using a non-admin account started, there is no place where Apple recommends this.
-mj

Simple Query Question - How do I return the Last 3 records of a Table?

Question.
For example, I have a table that has 50 records.
How do I, specify in SQL to only return the last 3 records of the table.
Select a.* from table a where ????

I was just trying to show an example to a friend on
how something like this would work and if it was even possible. But it won't work. Here's a simple example:
SQL> create table emp
2 (id)
3 as
4 select object_id
5 from   all_objects
6 order by object_id;
Table created.
SQL> select *
2 from (select rownum rn
3               ,b.*
4         from   emp b)
5 where rn > ( select (max(rownum) - 3)
6                from    emp)
7 ;
        RN         ID
     40830      55891
     40831      55892
     40832      55893So far, so good. These are the "last 3" rows inserted. Now delete a bunch of rows and insert 3 new ones:
SQL> delete emp where id < 40000;
33423 rows deleted.
SQL> commit;
Commit complete.
SQL> insert into emp values (60000);
1 row created.
SQL> insert into emp values (60001);
1 row created.
SQL> insert into emp values (60002);
1 row created.
SQL> commit;
Commit complete.
SQL> select *
2 from (select rownum rn
3               ,b.*
4         from   emp b)
5 where rn > ( select (max(rownum) - 3)
6                from    emp)
7 ;
        RN         ID
      7410      55891
      7411      55892
      7412      55893Here's the problem. Even though the "last 3 rows" are 60000 - 60002, I still get the same ones as the first query.

Simple Mail question (couldn't find Mail forum)

Sorry to ask this on iCal forum, but I saw no forums dedicated specifically for regular Mail.
This is a simple question as I am a new Mac owner: I am used to using gmail for my email, and like this primarily because, given that it is a web based email application, I can access my email from any computer, anywhere, anytime.
Given my new Mac, I am interested in switching to the Mail application and was wondering if there is any way to check my email when I am away from my home computer? I think this would work with a mobileme account, but I have not obtained one as of yet.
Any information would be greatly appreciated! Thanks...

Thanks Kosmoe...
One other question...if I do indeed create a new email account and use the Mail application for it, will I be able to check messages via the internet from any computer or only from my own?
And, if I want to be able to check from any computer, then it seems like getting a mobile me account would solve the problem, right? I am assuming mobile me email can be accessed from anywhere?
Sorry to be such a Mac newbie! But so far loving the whole Mac experience!

Simple Odd question

Similar Messages

Maybe you are looking for