Simple pass doesn't work after upgrading to Windows 10

Hi all I just upgraded to Window's 10 (took 3 hours, works). However HP Simplepass now doesn't work. Anyone else with this problem? Brian

Hi I fixed this issue using "Run programs made for previous versions of Windows" . BrianH15

Similar Messages

TX2616au touch screen doesn't work after upgrading to windows 7

Hi,
I just got my TX 2616AU multi-touch tablet few days, it came with Windows Vista ,and the WACOM touch screen worked perfectly, by the pen and my finger as well.
I got a Windows 7 Ultimate and decide to upgrade the system. The upgrading process was all right, after the upgrading everything worked fine but the touch screen. It didn't response my finger-touching any more, worked with the pen but the pen was running crazy.
So I downloaded and installed ALL drivers for Windows 7 from HP website for this model tablet, everything looked fine but the problem's still there. I searched internet and followed some advice, downloaded the driver from WACOM for Windows Vista and installed it, it reported a error, gave me a BLUE SCREEN then restarted and then the pen got back to normal, thanks GOD! But it still refused to response my finger-touch, Im out of idea...
Any suggestion would be appreciated!
Ted

Hi
I think the Flash Card support Utility and the Value Added Package would solve the issue but Im not quite sure if the links posted by Jeka are right
Please visit the Toshiba European driver page and choose your notebook model.
Then download the Flash Card support Utility and the Value Added Package for Win 7 64bit!!
Ensure that VAP should be installed at first and then Flash card support utility

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

ITunes doesn't work after upgrade to iOS 6

iTunes doesn't work after upgrade to iOS 6. The white screen with gray tape above appears, and nothing more happens. Reinstalling/restoring iOS doesn't help. I have contacted support team in my country (Russia) by phone, but they could not solve the problem. Is there downgrade to iOS 5.1.1 available?

What printer are you using? Is it listed here:
http://support.apple.com/kb/ht4356

TS4268 FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

Hi AnaMusic,
It was working perfectly before the upgrade to ISO 6.0.1, but now I can't log in using my apple ID ... I have tried all suggestion from Tom but nothing does work. I keep getting the message "FaceTime can't log in, check your network" is nothing wrong with my network everything else works fine, I can log in into FaceTime using my IPad 2 and my apple ID.
I'm currently working in Korea, but I bought the IPad in Australia,
Regards,
Namur

Microphone no longer works after upgrade to windows 8.1

After upgrade to windows 8.1 my internal microphone no longer works.
I tried installing updates suggested in other posts with similar driver problems but they did not work.
HPSupportSolutionsFramework-en-11.51.0048 did not work.
My internal microphone is IDT High Definition Audio Codec
When I go through the control panel and look at it - it shows a status of "not plugged in"
Please help
thanks

OK I am a little confused.
There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
However I just received the following email from you:
Hello gordml,
The questions you posted on the HP Support Forum recently received one or more answers.
Question: Microphone no longer works after upgrade to windows 8.1
Date: Sun Dec 21 01:01:56 PST 2014
View the answer(s).
Did this reply resolve your post or question?
If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
You can also show your appreciation by giving kudos.
We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
Thanks for being a member!
The HP Support Forum Team"
Why would this be sent to me if there has been no recent replies on this issue?

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

Cd drive doesn't work after upgrade

why doesnt the cd drive work after upgrade to mountain lion 10.8.5

sometimes they stay in, but it doesnt sound normal, weird clicking noises, and sometimes it just spits the cd out.

My HP LaserJet 1536 Scanner will not work after upgrading to Windows 10

I just upgraded to Windows 10, and now the scanner will not work, although I can still print. I downloaded the latest driver, but this does not seem to help. The error message I get states that scanner communication cannot be established. Please let me know if you have any suggestions. Thanks!

Greetings , I saw your post regarding the problems you are having with scanning after upgrading to windows 10.
I would start with the simple, have you tried just restarting the computer? Have you made sure your computer has all of it's windows updates? How can I tell if my computer is up to date? Most products do have updated software available for Windows 10, did you install the correct driver?HP LaserJet Full Feature Software and Driver I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too.  HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive.  Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8
(It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type ...Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan.  Have you tried just using the New Scanner app in Windows 10? It's the same as the one for Windows 8. Here are some resources;New Scanner app in Windows 10Scan app for Windows: FAQ
And a Video link...    Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks,

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Ethernet LAN not working after upgrading to windows 8.1

After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

Scanner of HP 8500 A909g does not work after upgrading from Windows 7 to Windows 10

After upgrading from Windows 7 to Windows 10 and subsequent upgrade of printer software, the scanner functionality did not work. When I tried to uninstall the printer software I got the message "HP uninstaller has stopped working". After another upgrade of printer software the scanner was still not working. How can I get around this problem? Update:
I followed the instructions for a similar problem with Windows 8 on http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Scan-doesn-t-work-on-Solution-Center-after-migrating-to-Win/td-p/2228367.After this, the scanning seems to work. Not sure whether it is possible to uninstall, though (don't want to try since it is working).

I had the same problem with my Officejet Pro 8600 All-in-One scanner, sfter upgrading from Windows 8.1 to Windows 10. After uninstalling and then reinstalling the printer driver, the problem is solved. You can look up the model of your printer on HP's support site and download it from there. Apparently, not all printers are compatible with Windows 10. In that case, they recommend you buy a new printer. ;-)

Bluetooth Not Working after upgrading to Windows 8.1

My Laptop is HP Pavilion G6 2015 tx after upgrade to windows 8.1, bluetooth is not working also the battery drain has increased anyone know a fix atleast for bluetooth problem ???

You're very welcome.
That is very interesting, because I didn't know of anyone who upgraded to W8.0 with a Ralink wireless card with the BT 3.0 radio that got the BT to work at all.
We tried the W7 drivers, and they didn't work.
That is why you don't see a W8 Ralink BT driver for the bluetooth on your PC's support and driver page amongst the other 11 drivers listed.
The Ralink 3.0 version of BT is not supported in W8.
While somehow the BT has worked in W8 for you, I'm afraid your luck has run out.
Unless by some fluke, HP installed a card with the BT 4.0 radio on your model...
You can try this W8 driver for the Ralink card with the BT 4.0 radio, but don't get your hopes up.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

Dolby Home Theater v4 not working after upgrading to Windows 10

Hi there, I just upgraded to Wndows 10 Home from Windows 8.1; everything went smoothly except for the fact that Dolby Home Theater v4 does not work. I had to reinstall it using the .msi file found in the Realtek Audi folders. I chose v4 over any of the other versions because I like how I can tune the equalizer to my liking and different uses. Anyways, the regular audio works and Dolby is turned on but there is no activity appearing on the equalizer and my music does not change once adjusted. Had this problem when doing an optional audio driver update in the past when I was running 8.1. I do not have the option to rollback the driver after upgrading to Windows 10. Does anyone have a solution to this issue or know what the correct Realtek driver is to make Dolby work? This is one of my favorite features of my laptop and I really want it up and running again! Thank you in advance! JakeStiebs My unit: Lenovo Ideapad Z580 running Windows 10 Home with Realtek Audio Driver 6.0.1.7535

one more thing. I was not able to download cleanup tool/online scanner too. but may be it has something to do with my internet bandwidth. and other strange thing i observed is that before restart i was not even able to turn off all security features. but after restart that problem seems to be corrected.

2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment. In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

Simple pass doesn't work after upgrading to Windows 10

Similar Messages

Maybe you are looking for