Simple Phone Questions

Few quick questions - We have all CISCO VoIP equipment and just want to know what the best option is for a compatible cordless telephone with multiple handsets?   Please help....Thanks!

Hello mbbristol1,
It actually depends on your requirements. Do you have any specific features that you're looking into? You may want to check the Cisco SPA302D. This will give you the convenience of a cordless on-premises mobility solution for VoIP services. Please refer to the link for more information.
http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/spa302d-multi-line-dect-handset/data_sheet_c78-717757.html 
Hope this helps!
Let me know if you have additional questions.
Kind regards.

Similar Messages

  • Simple/silly question: how do I set/change default font/color for outgoing mail messages?

    Simple/silly question: how do I set/change default font/color for outgoing mail messages?

    Just a suggestion..........
    Download Thunderbird.  Easier to use when it comes to what you want to do w/your emails. 

  • 4 Simple Flash Questions that Are Stumping Me!

    What is the Frame Rate for Web Animations
    Q1. I am making an animation which will be played on the web. What is the default frame rate (fps) of Flash CS5? And what is the frame rate of for web?
    Q2. My animation needs to be 30 seconds long. So at 15 fps that would mean I need to use 600 frames in Flash?
    How Do I Mask everything so all I see is the Content on the Stage?
    I have a wide image that extends past my movies stage size so when I preview my movie the image is visible. How do I mask out anything that extends past my movies window size? I believe I can create a layer named "mask" and place it above all other layers, but I forget how to make the mask. Any help is appreciated.
    How to Fade a Graphic
    I have a graphic element (some type) and I want it to fade from 0% to 100%. In older versions of Flash I could just select the symbol and then set it's alpha value to 0%, move a few keyframes and then set the alpha to 100%. Voila! but now it doesn't seem to work that way. How can I do this in CS5?

    Ned, it says 24 fps which means there is 24 frames per second so each 24 frames is 1 second.
    Date: Fri, 4 Nov 2011 05:35:16 -0600
    From: [email protected]
    To: [email protected]
    Subject: 4 Simple Flash Questions that Are Stumping Me!
        Re: 4 Simple Flash Questions that Are Stumping Me!
        created by Ned Murphy in Flash Pro - General - View the full discussion
    1 You can create your character as a movieclip and copy/paste that movieclip from one file to another. 2. One way to create a movieclip is to copy all the frame of the animation's timeline (select them all, right click the selection, choose Copy Frames), then create a new movieclip symbol (Insert -> New Symbol...etc) right click on its only keyframe and chhose Paste Frames.  THat will put all the layers and frames you copied into the movieclip The only way to come close to being certain about the timing of you animation is to use code to keep track of the time, something like getTimer()..  The frame rate that a file plays at is not a reliable means of dictating the time it takes due to a variety of factors which include the amount of content you are trying to process and performance limits of the user's machine.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4007420#4007420
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4007420#4007420. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Flash Pro - General by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Simple performance question

    Simple performance question. the simplest way possible, assume
    I have a int[][][][][] matrix, and a boolean add. The array is several dimensions long.
    When add is true, I must add a constant value to each element in the array.
    When add is false, I must subtract a constant value to each element in the array.
    Assume this is very hot code, i.e. it is called very often. How expensive is the condition checking? I present the two scenarios.
    private void process(){
    for (int i=0;i<dimension1;i++)
    for (int ii=0;ii<dimension1;ii++)
      for (int iii=0;iii<dimension1;iii++)
        for (int iiii=0;iiii<dimension1;iiii++)
             if (add)
             matrix[i][ii][iii][...]  += constant;
             else
             matrix[i][ii][iii][...]  -= constant;
    private void process(){
      if (add)
    for (int i=0;i<dimension1;i++)
    for (int ii=0;ii<dimension1;ii++)
      for (int iii=0;iii<dimension1;iii++)
        for (int iiii=0;iiii<dimension1;iiii++)
             matrix[i][ii][iii][...]  += constant;
    else
    for (int i=0;i<dimension1;i++)
    for (int ii=0;ii<dimension1;ii++)
      for (int iii=0;iii<dimension1;iii++)
        for (int iiii=0;iiii<dimension1;iiii++)
           matrix[i][ii][iii][...]  -= constant;
    }Is the second scenario worth a significant performance boost? Without understanding how the compilers generates executable code, it seems that in the first case, n^d conditions are checked, whereas in the second, only 1. It is however, less elegant, but I am willing to do it for a significant improvement.

    erjoalgo wrote:
    I guess my real question is, will the compiler optimize the condition check out when it realizes the boolean value will not change through these iterations, and if it does not, is it worth doing that micro optimization?Almost certainly not; the main reason being that
    matrix[i][ii][iii][...]  +/-= constantis liable to take many times longer than the condition check, and you can't avoid it. That said, Mel's suggestion is probably the best.
    but I will follow amickr advice and not worry about it.Good idea. Saves you getting flamed with all the quotes about premature optimization.
    Winston

  • A few simple Logic questions...please help.

    I have a few probably simple Logic questions, that are nonetheless frustrating me, wondering if someone could help me out.
    1. I run Logic 8, all of the sounds that came with logic seem to work except organ sounds. I can't trigger any organ sounds (MIDI) on Logic, they won't play. I have a Yamaha Motif as my midi controller.
    Any idea why?
    2. I've starting running into a situation where I will record a MIDI track, the notes are recorded but they won't playback. The only track effected is the one that was just recorded. All other midi tracks playback.
    I have to cut the track, usually go out of Logic and back in, re record for it to playback properly. Any idea why this may be happening?
    3. How important is it to update to Logic 9. Are there any disadvantages down the road if I don't upgrade. If I purchase the $200 upgrade, do I get a package of discs and material, or it just a web download.
    Any help is appreciated!
    Colin

    seeren wrote:
    Data Stream Studio wrote:
    3) You get a full set of disks and manuals.
    They're including manuals now?
    I think his referring to the booklets ...on how to install etc
    It would be great to see printed manuals though ...I love books especially Logic/Audio related !!
    A

  • Simple Quick Question

    wrong section, post was moved.
    Message was edited by:
    Rob17

    you titled "simple quick question"...
    .. complicated to answer..
    a) the TermsOfUse of the iTS don't allow any processing of purchased files, these are "copy protected"..
    b) iM has a voice-over function..
    c) iM is a video-edit app.. easy to use... just learn to handle it...
    d) iM allows to "extract" audio (=muting the original audio, adding your own..)
    e) to learn iM, spend some time here: http://www.apple.com/ilife/tutorials/imovie/index.html
    f) use pencil and paper first! WRITE and scribble, what shall happen when in your movie/parody... make a script, draw a storyboard .. THEN launch iM.. in other words: think first, then edit.. iM is just a tool, it does not "create"... Picasso needed a papertowel and half a stencil to create art....
    g) to get comfortable with iM, start with your own, small, short (3min!) project... import some stills, edit them, add a funny voice-over, add sounds, add music... good? make a bigger one...
    h) .. in our Lecture II, we teach you how to import shows from TV, youtube, wherever..
    standard disclaimer:
    be nice to ©opyrights ...

  • Simple query question

    hi all,
    I have a XMLType table with one column - I have presently one row, in my column xmlsitedata I have stored one large xml file.The schema definition is given below:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <xs:schema elementFormDefault="qualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
    - <xs:element name="siteList">
    - <xs:complexType>
    - <xs:sequence>
    <xs:element name="site" type="siteType" minOccurs="0" maxOccurs="unbounded" />
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    - <xs:complexType name="siteType">
    - <xs:sequence>
    <xs:element name="nameEn" type="xs:string" />
    <xs:element name="nameFr" type="xs:string" />
    </xs:sequence>
    <xs:attribute name="code" type="xs:string" />
    </xs:complexType>
    </xs:schema>
    I have executed the query below:
    select x.XMLSITEDATA.extract('/siteList/site/nameEn/text()').getCLOBVal() "stName" from wsitelist x;
    and I get all english names of some 200 locations, however, there is 1 row selected and all names show up on one row. How do I split them into 200 or whatever rows?
    Thanks,
    Kowalsky

    Have a look at the answer provided in the following thread.
    very simple XML question
    This may solve your problem.
    use xmlsequence.
    Alvinder

  • HT5312 why do i have to talk to someone all on the phone to answer a simple security question... im not very social and id rather find an answer by reading it on the website; after all that's what its for. Right?

    frustrated

    If you have a rescue email address on your account, as described on the HT5312 page that you posted from, then you can reset them via http://appleid.apple.com - follow steps 1 to 5 half-way down that page and you should give you a reset link.
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset - which is likely to be by phone as they need to confirm your id and that it's your account, which is more easily done by phone rather than having emails going back-and-forth.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • Simple App question - downloading to phone automatically download to lib?

    When I download an App direct to my iphone4, does it appear on my itunes app library on my laptop without having to sync or does it only appear there once I sync them?

    If you download an app with iTunes on your computer, the app will not be installed on your iPhone unless Sync Apps is selected under the Apps tab for your iPhone sync preferences with iTunes along with the app selected followed by a sync after downloading the app with iTunes on your computer.
    The same applies in reverse when downloading an app with your iPhone. The app will not be in your iTunes library on your computer until you sync your iPhone with iTunes after downloading the app with your iPhone if Sync Apps is selected under the Apps tab for your iPhone sync preferences with iTunes.
    Sync Apps should be selected under the Apps tab for your iPhone sync preferences with iTunes for a number of reasons. With this selected, after downloading an app with your iPhone, the app will be copied to your iTunes library automatically the first time you sync your iPhone with iTunes after doing so. This allows for installing an app on your iPhone by downloading the app with iTunes on your computer followed by a sync, and this also allows for removing an app from your iPhone without deleting the app by deselecting the app under the Apps tab followed by a sync. To reinstall the app again later, reselect the app under the Apps tab followed by a sync.

  • J2ME on cell phones questions

    Hi,
    I'm in the process of picking a project and wanted to see how doable it is. The project involves a cell phone and a Java program to use Bluetooth. This is real unknown territory for me so my questions are very simple. First does J2ME have packages/classes that allow for bluetooth communication (name)? Or is that a separate package I need to find?
    Second, can you save to files/permanent memory from an application running on a cell phone (to save some program settings etc). On the cheapest cell phone usually how little memroy is available? Also can you name some classes that allow for this in J2ME (other libraries).
    Finally how standard is all this? What's the probability that the program will run on all of the new cell phones? On all new cell phones from same manufacturer?
    Thanks.

    Hi,
    J2ME has JSR 82, that specifies BlueTooth stack. It's bundled with latest WTK releases (and netBeans 4.0 Mobility Pack as well). If it's available on device depends on HW equipment of the device of course.
    For your second Q: RMS storage is defined by MIDP 1.0 itself so yes, you can store some records. Not sure about the size I guess you can count on 8kb. The storage will be more , least I know of is 30kb on Nokia 6310, usual sizes are 1-5 Mb, smartphones use MMC cards, so the size can grow to hundreds of megs.
    Peter

  • Returning phone question?!

    About three weeks ago I got the blackberry classic. After ten days of using the device I decided it wasn't for me and returned it within the 14 day return period and went ahead and got the Note Edge after paying the $35 restocking fee. I'm not completely sold on this phone just yet, but I recall the rep saying, "that once I switch the Blackberry for the Note, that I wouldn't be able to exchange the Note for something else, even if I pay another restocking fee." Does anyone know if this is true?

    We want to make sure correct information is provided about your Worry Free Guarantee return. To clarify, you can only complete 1 wfg return. Did you advise the phone rep about the recent exchange you just completed?  SheritaH_VZW  Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Simple Report Question

    Post Author: scott123
    CA Forum: General
    I want to take the information in a simple excel table and recreate it 3 times, each time sorting/grouping on a different columnHere is the tableAnd here is the report that I'm trying to generate (first sorted by name, alphabetically, then grouped by rank, then grouped by size) I'm comfortable working with excel tables in Crystal, but I'm running into a problem repeating the information and then sorting each group separately. I also have no problem doing each group in a single report (without repeating any records), but I'd like to include all 3 groups in a single report.  My apologies for how remedial this question is- I thought for sure that Crystal could do this easily but I've spent a couple of days on this and am running into a brick wall.

    Post Author: pandabear
    CA Forum: General
    That's right Scott, and maybe make them "on demand"
    sub reports so the user only has to see the data they
    really want at the moment.  Gives the report a nice clean look too.
    PB

  • A simple security question

    I'm trying to write a simple self-signed applet that use a jca provider but thi exception "java.security.SecurityPermission putProviderProperty.BC" is thrown. if I use a policy file, it works fine but for a beginner user is not very useful intall a new policy file.
    After this I tried to write a new self-signed applet that read a file and open a ServerSocket on port 21, and it work fine without a new policy file!
    My question is this: why is needed a policy file to add a provider and not to open a ServerSoket or read/write a file???????
    PS
    if u have an idea to resolve my problem without a policy file, tell me pls!!! IT'S URGENT!!

    An applet works out of a so-called sandbox. The security restrictions can be overcome in one of two ways that you have tried:
    1) by the use of a policy file, or
    2) by signing the applet
    So, to answer your question:
    My question is this: why is needed a policy file to add a provider and not to open a ServerSoket or read/write a file???????Since the applet is signed, there is no need for a policy file......if you tried to access the socket without signing the applet, you'll get the security exception!
    ;o)
    V.V.

  • A somewhat simple security question......

    If a mac running macosx has two separate user accounts, lets say one admin and the other a standard user, or both admins or both standard users.....
    Is it possible for a hacked/penetrated account on one of the users to affect or read any info from the other user on the same machine ?
    What application is in question; Safari lets say.....

    FLUIDNYC wrote:
    So, disable all scripts and uninstall all plugins from the browser.
    No java, No javascript, No plugins like flash, java, shockwave, quicktime, or adobe crap.
    So, no functionality. What about that java applet I need to run 10 hours a day. Do you think I should go out of business over it? Or all my QT movies? Or, deprive myself of Flash, so I can't view the content of websites?
    So, lets say you browse www.thissiteisinfected.com and have everything uninstalled (see above), and your smart enough to browse the web using a "STANDARD" user account and not the "ADMIN" user account.
    Running from a standard user buys you nothing and adds additional steps. If you want to download an app, before you install, you will get a dialog warn you "XXXX is an application you downloaded from the internet..." So, you still have to authenticate. And what about *all the apps that need no authentication to install?*
    You tell me how this website will inject crap into your MAC with the settings above???
    There is no way to FORCE CODE into your browser if everything is disabled.
    Tell me how it can "inject crap" into my "Mac" admin without my complicity.
    I have bumped into a rouge antivirus website while on my macbook using safari.
    All of a sudden a popup stated i had spyware, i could'nt close the box/window, I had to do a FORCE QUIT on SAFARI to get out of that page. It pretty much hijacked SAFARI.
    This is nothing that can harm you. It is annoying having to force quit over it, but that is all.
    My safari download settings place things on my desktop, sure enuff, there was a .EXE file sitting on my macbooks desktop.
    Sure enough, your Mac can't do a thing with it.
    NOTHING IS BULLETPROOF.
    I agree but there are simpler ways to plant a rootkit you overlook, that have nothing to do admin accounts or ports. *The question is, who would want to?* Even if a black hat is randomly hunting for bank account numbers, social security numbers, credit card numbers, etc. he would pass up a UNIX based system with good protections in place for an easier target.
    In short, in a home environment, I could never recommend running from a standard user. Especially if they are on a router and/or using OS X firewall. (The exception being if you have kids and want to use parental controls.) I have no idea how this mantra about using a non-admin account started, there is no place where Apple recommends this.
    -mj

  • Simple Query Question - How do I return the Last 3 records of a Table?

    Question.
    For example, I have a table that has 50 records.
    How do I, specify in SQL to only return the last 3 records of the table.
    Select a.* from table a where ????

    I was just trying to show an example to a friend on
    how something like this would work and if it was even possible. But it won't work. Here's a simple example:
    SQL> create table emp
      2  (id)
      3  as
      4  select object_id
      5  from   all_objects
      6  order  by object_id;
    Table created.
    SQL> select *
      2  from  (select rownum rn
      3               ,b.*
      4         from   emp b)
      5  where  rn > ( select (max(rownum) - 3)
      6                from    emp)
      7  ;
            RN         ID
         40830      55891
         40831      55892
         40832      55893So far, so good. These are the "last 3" rows inserted. Now delete a bunch of rows and insert 3 new ones:
    SQL> delete emp where id < 40000;
    33423 rows deleted.
    SQL> commit;
    Commit complete.
    SQL> insert into emp values (60000);
    1 row created.
    SQL> insert into emp values (60001);
    1 row created.
    SQL> insert into emp values (60002);
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> select *
      2  from  (select rownum rn
      3               ,b.*
      4         from   emp b)
      5  where  rn > ( select (max(rownum) - 3)
      6                from    emp)
      7  ;
            RN         ID
          7410      55891
          7411      55892
          7412      55893Here's the problem. Even though the "last 3 rows" are 60000 - 60002, I still get the same ones as the first query.

Maybe you are looking for