Simple plans for setting up WebLogic 10.3.3 to run at boot in Solaris SMF?

I need to set up WebLogic (AdminServer & NodeManager) to start at boot on a Solaris/X86 VM. They will be owned by a specific userid. Is there a shortcut guide to doing this with SMF on Solaris 10?
Just so it's clear, I know how to start the AdminServer and NodeManager, I just need it done automatically at boot.

Please remove <data-value name="LOCAL_JVMS"> tag, You are trying to install a JDK on /opt/JRE that for some reason this is being refused.
If this don't works please show us your silent.xml file.
Best regards.

Similar Messages

I need simple instructions for setting up hosted home directory

Folks, I am just learning how to use OS X server (10.3.9) in our office. The manuals aren't totally clear.
We have a lot of interns that work on shared documents on several machines. I want them to be able to login into an account on the server (where the shared files will be) and work on them that way.
I am not quite sure how to do this. The server is already set up. I set up a LDAPv3 domain (not sure why I needed to - just following the manual instructions.
Things I don't understand:
- why did I need to setup another domain directory (per the manual's instructions). The local one does show up on our LAN even though workgroup manager says it's not visible to the network. Everyone can see the sharepoint I've created.
- I can't seem to do anything with the Access Control List. I can't put anyone in it.
Please advise.
Tangier

the LDaPv3 is so that if someone isn't on the local subnet of the server they can access their user account. By having a specific directroy domain you can have an address that can be access from anywhere on the network.
It is also there so you can be able to create indivudual user accounts to have the ablitly for users to login to multiple machines and have there home folder located on the server. This allows users to not be restricted to a specific machine but still have access to all their files.
to have the hosted home directories you first need to create a location to have the home directories... then enable sharing on that location. this can be done in the workgroup manager under sharing. Make sure under the "network mounting" you enable use for home directories. Once that is created and set up you will now be able to choose that location for users home directories under "home" in the accounts section.
I don't have much experience using the ACLs sorry... basically for a share folder i make a folder, enable sharing on it in workgroup manager, mount the folder and then drag it to the login items for that group that i want to use that folder. that way when a particular user of that group logs in the share folder will mount and they can have access to the folder with out having to login to the server.
I hope that helps a little and didn't confuse you more... i am still new myself but i have had to set up the individual users and share folders.
ALSO: when having users work with the shared documents... make sure they are coping the files to there local user then copy back when they are done... this will help avoid potential issues with files being opened by multiple people and chances of file corruption.
again i hope that didn't confuse you more
dm

Simple directions for setting up a new magic mouse?

Have the original mouse, which keeps losing its connection. I am replacing it with a brand new Magic Mouse and have looked all over for directions to connect with with my MAC, discontinue the original mouse, and start using the new one. I have checked all my updates and downloaded the most current magic mouse software. A pop up says there is a new version of the download already loaded, but I can't find it.
Can someone tell me if I really need a new mouse and can help me correct my connection loss on my orginal mouse or help me, step by step, to connect the new one? Thank you all.

Reset the PRAM to see if that helps the old mouse.
Setting up the new one should be turn it on and it should pair.
Barry

Pricing and plans for setting up new virtual machines

Hi,
We are having our dedicated servers with below mentioned configurations and now we are planning to move them to Microsoft Azure virtual machines.
we would like to have your suggestions and plans to move our all applications to Azure virtual machines.
We are having
8 different web applications,
1 Scheduler service,
Mobile push Notifications for mobile apps,
1 BI Server,
4 databases
Currently we are using 4 servers for all the above mentioned applications/services applications.
Our current server details are as below
S.No      Server Details
1              Processor                           2x
Xeon CPU E5-2620 @ 2.00GHz
2              CORE                                  2x
12 Core
3              HDD                                    3x
1TB (RAID 5)
4              RAM                                   16
GB RAM
5              Bandwidth
50,000 GB
6              Windows Server               Windows Server 2008 R2 Standard
7              IIS Version
7.5
8              SQL Server
Microsoft SQL Server 2012
9              Services
Web Server,database and BI server.
Looking forward for valuable suggetions and response.
Regards
Denise

Hi,
As I know,  you need to create an Azure VM with IIS installed to host your 8 web application, create an azure oracle VM to host BI server, and create an Azure SQL Server VM to host your 4 database, for Scheduler service, please try to use Azure Scheduler
service:
http://azure.microsoft.com/en-gb/documentation/services/scheduler/Azure Notification Hubs provide an easy-to-use infrastructure that enables you to send mobile push notifications from any backend (in the cloud or on-premises) to any mobile platform, see
more: https://msdn.microsoft.com/en-us/library/azure/jj927170.aspx
Please try to estimate your bill at azure pricing calculator:
http://azure.microsoft.com/en-us/pricing/calculator/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

List of activities for setting up ERP 6.0 with Best Practices

Based on my understand if i were to plan for setting up an ERP 6.0 Landscape with Best Practices (Full Scope) i would consider the execution of following activities:
Prepare EHP4 Landscape
Install ERP 6.0 on DEV
Upgrade DEV to EHP4 SP06
Install SAP Best Practices v1.604
Activate Full Scope of Best Practices on DEV
Prepare QA (System Copy - DEV with BP Activated)
Prepare PRD (System Copy - DEV with BP Activated)
Register Landscape in Solution Manager
Customization on EHP4
Customize Best Practices Scenarios on DEV
Transport Changes to QA
Test Changes on QA
Transport Changes to PRD
Upgrade to EHP5
Upgrade DEV, QA and PRD to EHP5
Install HCM Localization on DEV, QA and PRD
Customization on EHP5
Customize HCM Best Practices Scenarios on DEV
Transport Changes to QA
Test Changes on QA
Transport Changes to PRD
Please advise if there is anything missing or incorrect.
Thanks.

Hi,
I'm on a project with similar requirements. I follow this order in steps that you describe:
Install ERP 6.0 on DEV
Upgrade DEV to EHP4 SP06
Install SAP Best Practices v1.604 on DEV
Install QA
Install SAP Best Practices v1.604 on QUA
Install PRD
Install SAP Best Practices v1.604 on PRD
Activate Full Scope of Best Practices on DEV
Register Landscape in Solution Manager
Upgrade DEV, QA and PRD to EHP5
Install HCM Localization on DEV, QA and PRD
Customize Best Practices Scenarios on DEV
Transport Changes to QA
Test Changes on QA
Transport Changes to PRD
I hope that this will be useful for you
Best regards.
Alejandro Cepeda.

Re: (forte-users) Ok, what's the "secret" for setting serverside envi

Dear Robinson,
It seems to be that you have 2 ways of solving the problem:
1) restart forte after setting the environment variables
2) write a little application which sets the required variables, using
the task.part.OperatingSystem.SetEnv(name,value) method.
If you have to chage the variables rarely, then it`s easier to restart forte,
otherwise I would suggest to use the SetEnv function...
Best Regards,
Tamas Deak
"Robinson, Richard" wrote:
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
Tamas Deak
Lufthansa Systems Hungary
(forte developer)
2-6 Mazsa ter, Budapest, 1107, HUNGARY
(36-1) 4312 973
[email protected]
[email protected][email protected]-

Richard,
There is no way of changing the environment variable once the Node
Manager is up. You will have to shutdown the node manager and then restart
it to have the new environment variables take effect. Sorry, there is no
secret way of doing this that I know of.
But you can set the variables on you development machine and run you
application without distributing. This way the partition will be running in
your client machine and not the server.
Another way we have also got around this is by having a special
environment variable on the client side that opens a admin screen when you
run you application. This admin screen will allow you to change the
environment variables and then set them on the server partition. You will
have to do come coding on the server to make this happen but if you are
using a framework then it should be easy. We call this developer reconnect
facility. It only can be activated by the special client side environment
variable. I comes in very handy when we are development and want to change
the database on the server partition.
Hope this help.
ka
Kamran Amin
Framework, Inc.
303 South Broadway
Tarrytown, NY 10591
(914) 631-2322x121
[email protected]
http://www.frameworkinc.com/
-----Original Message-----
From: Robinson, Richard [mailto:[email protected]]
Sent: Thursday, November 04, 1999 7:23 AM
To: [email protected]
Subject: (forte-users) Ok, what's the "secret" for setting server side
environment varia bles when running in the Forte Development
Environment?
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Maintenance plan for backup executes endlessly.

Hi All,
I have a maintenance plan for a full back which is scheduled to run once every night. It has been running quite peacefully with out any error and usually takes 50min average. But Now(the last three days), it starts executing but never completes. I tried
to run sp_who2 and saw a block when the execution reaches at a specific database. I stopped the execution, killed the spid on the 'Blk By' and then restarted the execution but same problem show up again. Whats going on? Any ideas?
Thanks.

-So as you told me i ran the sp_readerrorlog and found the below message. Looks like a virtual device kind of a things . . . .
2014-04-03 09:20:24.280 spid148 BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device '(local)_AAA_DEV_SQL_Database-SQL_Database-1396486800084#11-3006-SQL'.
Operating system error 995(The I/O operation has been aborted because of either a thread exit or an applicat.
And last night i tried to change the schedule at which the job is running and it worked well for today
but i think its not going to be like this today or on the weekends. So i couldn't see any block.
Thanks.
Tina
VIRTUAL_DEVICE generally means here that anything which is not local or shared disk.Like thrid taking party tool backup on tape or VSS backups which kind of take snapshot backup.If youo say that no Third party toll is involved and you dont want any
VSS backups please disable SQL Server VSS writer service.This will stop the VSS backups.Or as you suggested ,if you want VS backups ,you can schedule your backup at different time.
>>And last night i tried to change the schedule at which the job is running and it worked well for today
I guess I am correct about VSS backups interfereing your regular backup.
PS: Since you killed the thread you got message like below
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device '(local)_AAA_DEV_SQL_Database-SQL_Database-1396486800084#11-3006-SQL'. Operating system error 995(The I/O operation has been
aborted because of either a thread exit or an applicat.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Tcode for setting FI-SL planning: Summary table name

can any body suggest Tcode for for setting FI-SL planning: Summary table name.

Hi,
Check Tcode : GB01.
CHECK THESE ALSO,
GLPLINST.
GLPLINSTALL.
THANKS,
REWARD IF HELPFUL.

Problem setting up Weblogic's data source for oracle

          Hi!
          I am trying to setup XA DataSource Pool for Oracle using Weblogic's driver. App-Server
          throws exception during startup.
          config.xml setting are appended with this posting.
          Can somebody help me identifying the problem?
          Thanks,
          Vinay
          <JDBCConnectionPool
          Name="WL_XA_1_Pool"
          Targets="examplesServer"
          CapacityIncrement="1"
          DriverName="weblogic.jdbc.oci.xa.XADataSource"
          InitialCapacity="1"
          JDBCXADebugLevel="1"
          MaxCapacity="5"
          Properties="user=vinay;password=vinay;dataSourceName=WL_XA_1_Pool;serverName=pqasun1"
          RefreshMinutes="0"
          ShrinkPeriodMinutes="15"
          ShrinkingEnabled="true"
          TestConnectionsOnRelease="false"
          TestConnectionsOnReserve="false"
          URL="jdbc:oracle:oci8:@PlatformTest"
          />
          [error_wl2.txt]


          Hi Dinu,
          Silversword is our upcoming maintenance release for WLS 6.0, and
          should be available in June timeframe.
          If you are only using 1 database instance, you can use Oracle's
          driver in non-XA mode in distributed transactions. Please refer
          to "Configuring non-XA JDBC drivers" section for details: http://e-docs.bea.com/wls/docs60/adminguide/managetx.html#1045803.
          -- Priscilla Fung, BEA Systems, Inc.
          "Dinu Ramanthara" <[email protected]> wrote:
          >
          >Hi,
          > What is Silversword?
          >
          > I need to use Oracle's Driver as I have to use Oracle
          >AQ and Oracle
          >AQ doesn't seem to work with jDriver. All my database
          >activity,
          >through AQ as well as through JDBC are restricted to the
          >same Oracle
          >instance. Given that what are my options? Should I use
          >Oracle 8.1.6
          >drivers or should I use 8.1.7 drivers.
          >
          >Is there a document/sample code illustrating what need
          >to be done
          >to bind Oracle's XADataSource to the JNDI tree.
          >
          >Regards,
          >Dinu
          >"Priscilla Fung" <[email protected]> wrote:
          >>
          >>Hi Vinay,
          >>
          >>A couple of things to note. Oracle 8.1.6's driver has
          >>a bug that
          >>does not accept foreign Xid, and thus cannot be used
          >with
          >>any 3rd
          >>party vendor's Tranaction Manager, including WLS. Oracle
          >>8.1.7's
          >>driver has fixed this problem, but they have threading
          >>issues.
          >> We have worked around the threading issues in Silversword,
          >>but
          >>not in WLS 6.0 release. For now, the only Oracle XA
          >driver
          >>we
          >>recommend is Weblogic's jDriver for Oracle.
          >>
          >>-- Priscilla Fung, BEA Systems, Inc.
          >>
          >>
          >>"Vinay" <[email protected]> wrote:
          >>>
          >>>
          >>>
          >>>
          >>>Hi!
          >>>
          >>>I am trying to setup XA DataSource Pool for Oracle using
          >>>Weblogic's driver. App-Server
          >>>throws exception during startup.
          >>>config.xml setting are appended with this posting.
          >>>
          >>>Can somebody help me identifying the problem?
          >>>
          >>>Thanks,
          >>>
          >>>Vinay
          >>>
          >>>
          >>>
          >>>
          >>> <JDBCConnectionPool
          >>> Name="WL_XA_1_Pool"
          >>> Targets="examplesServer"
          >>> CapacityIncrement="1"
          >>> DriverName="weblogic.jdbc.oci.xa.XADataSource"
          >>> InitialCapacity="1"
          >>> JDBCXADebugLevel="1"
          >>> MaxCapacity="5"
          >>> Properties="user=vinay;password=vinay;dataSourceName=WL_XA_1_Pool;serverName=pqasun1"
          >>> RefreshMinutes="0"
          >>> ShrinkPeriodMinutes="15"
          >>> ShrinkingEnabled="true"
          >>> TestConnectionsOnRelease="false"
          >>> TestConnectionsOnReserve="false"
          >>> URL="jdbc:oracle:oci8:@PlatformTest"
          >>> />
          >>>
          >>
          >

HT4157 I want to set up my data plan for my iPad however I am in Germany for the next 3 months. Will this plan work the same here as it would in the US? Is there anything I would need to do in addition to get the service I need out here?

I just moved to Germany and want to set up the data plan for my iPad. I currently have the iPad linked to at&t however have not yet set up service. I am afraid that I will pay for it and not be able to use it out here. Will the standard at&t cellular data plan work in Germany or am I out of luck??

BobTheFisherman wrote:
http://www.apple.com/ipad/LTE/ Note that Germany is included in the list for LTE depending on your iPad model.
but not an AT&T as clearly stated by OP ( unless you can use a Verizon/Sprint model on AT&T )
Looks like we both need to read the OP more carefully

Trying to set up payment plan for final bill. Want...

Treid to set up a payment plan for my final bill thats just come through, nearly 2 months after the line was switched off.
Was told via phone to the indian call center that it was not possible to do this as the account was already closed. And that if i didn't pay the full amount by end of november that i would be taken to court.
Now i am confused, i have made a reasonable offer to pay off the final bill and they are saying no and want to take me to court cos i cannot afford to pay the bill in one lump!!!
Please help.

Was still in contract when my parent decided that they wanted to sell the house and wanted me out. was left with no choice but to leave.
Wasn't told that it was possible to set up a plan even when querying it before having to cancel.
Unfortunately this is the type of tactics I have come to expect from this company.
My gas and electric company were happy to set up a payment plan to pay the final bill, as was the water company.
The only company that i have had any problems with trying to do this is unfortunately BT.
Well I suppose I could wait until the account went to a collections agency to set up a payment plan with them. Just dont understand why BT themselves cannot do this.

Simple steps for creating a planning application

Hi all,
I am trying to create a simple planning application. I need to show the actuals by hierarchies on characteristics and allow the users to plan on various levels of the hierarchy. Then, I have to generate a report comparing the previous year actuals and present plans. Please let me know the simple steps to achieve this.
Thanks.

hi Uma,
Create planning applications ,Go THru This LInkS .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/frequently asked questions - planning with sap netweaver bi.faq#q-6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap bw business planning and simulation - how to guides list.htm
Hope this links help you to create simple planning applications.
THnaks
Varun CN

How do I get a data plan for my iPad in Paris?

I'm travelling to Paris at the end of the month and I'm wondering if anyone can tell me the names of carriers that sell SIM card data plans for iPads, and if there are any special things to be aware of.

I know with a new iPad it is usually a simple matter to use the Settings app on the iPad.
Settings > Cellular Data > there's a link to set up your account.
If it doesn't show call your carrier and ask to set up an account there.
If you want to have your iPad share an account with your cell phone call your carrier.

I have two Apple IDs, and this is causing problems with syncing via iCloud. How do I move everything to one ID? All advice is for setting up, not for after it's already set up.

My problem is that I have been a Mobile Me user for the past couple of years, and because of that a second Apple ID was generated in addition to the one I've been using for years. When iCloud was introduced last fall I did everything I was supposed to in setting it up, but it is evident that the syncing is not working as it should. In checking, I am certain this is because I now have two active Apple IDs. I would assume this is a common issue with all who were/are Mobile Me users.
The online help says you can't merge two IDs. Okay. What I want to do is to get rid of the Moble Me ID and only use my regular Apple ID. But the help on that issue seems to only give instructions for setting up the iCloud account. It seems that when I go into my iCloud accounts, both on my iPhone and my Mac, I can view the ID but there is no way to change them to another ID or to eliminate the account.
Please help. I am a long-time Apple user and this really should be a fairly simple matter to take care of, but this is one issue where the normally user-friendly Apple way of life is giving me fits. Thanks.

I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

Plans for Ubuntu version of ADE?

Does Adobe have plans to port their Digital Editions software to Ubuntu?
This support for Ubuntu would be essential for those who own ebooks. Ubuntu users are currently unable to read their ebooks that are only compatible with ADE (i.e. to read Google Play ebooks offline).
I wish that ADE becomes available to all popular desktop platforms (i.e. Windows, iOS and Linux) so that everyone can read their DRM protected ebooks.
Hat Adobe irgendwelche Pläne, Digital Editions nach Ubuntu zu migrieren?
Diese Unterstützung für Ubuntu wäre sehr wichtig für die, die Ebooks haben. Ubuntu Benutzer können derzeit keine Ebooks lesen, die nur mit ADE kompatibel sind (z.B. Google Play Ebooks offline lesen).
Ich wünsche, dass ADE für alle populäre Desktop Plattformen zur Verfügung steht (z.B. Windows, iOS, und Linux) damit jeder deren Ebooks mit DRM lesen kann.
Schönen Tag noch.

Thank you for your quick reply!
I then read this tutorial for setting up ADE in Wine:
http://robert.penz.name/440/howto-install-adobe-digital-editions-on-ubuntu-12-04-and-use-i t-with-an-e-book-reader/
I don't have an e-reader, but double clicking on the ascm file opened it in ADE under Wine. Then it downloaded a protected PDF in my home directory for offline use. ADE for Windows ran surprisingly fast on Ubuntu 12.10, and it opened up all the notes/bookmarks and pages. I haven't found a problem with it yet other than trying to open the ascm file from within the ADE interface.
Thanks again.

Simple plans for setting up WebLogic 10.3.3 to run at boot in Solaris SMF?

Similar Messages

Maybe you are looking for