Simple powershell help

Hi,
I need to change multiple .txt file names in a folder.
I have found information about renaming the files using Powershell but I do not what to rename the file. I
want to add an "_Deviation" to it.
I go into powershell and can get this far.
PS C:\Users\Brandon> cd "C:\Users|Brandon|Desktop|Deviation"
PS C:\Users|Brandon|Desktop|Deviation> Dir | Rename-Item -NewName { $_.name -replace
What is in bold does not help me though. that is just how you can add a _ to where a space was.
I think I need a something other than the "Rename" command or whatever you call it.
I just need to know how to change the part that is in bold so that it will just add a "_Deviation"
to the end of the file name
so it looks like this:
RA-0001_Deviation
instead of RA-0001
thanks for any help.

Hi,
Give this a try:
Get-ChildItem | ForEach {
Rename-Item -Path $_.FullName -NewName "$($_.BaseName)_Deviation$($_.Extension)" -WhatIf
If you're happy with the results, remove -WhatIf and run it again.
EDIT: Hah, slow on the draw. See above.
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

Similar Messages

Hi when i send imessages it keeps showing up as my email address on the receiving device. I know its something simple! Help please.

Hi when i send imessages it keeps showing up as my email address on the receiving device. I know its something simple! Help please.

Hi Megamanfx,
If you are having issues with the Sent From settings in iMessage on your iPhone, you may find the following article helpful:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
- Brenden

Help! I need a simple powershell command to display all folders & files over the 260 char limit

Can anyone help me please? I'm trying in vain to identify any files or folders I have in a directory over the 260 char limit.
my powershell knowledge is quite limited so I've hit the wall with ideas.
Any help appreciated.
Thanks

Would running this command on its own within powershell work?
Or do I need to add this to your script?
get-folderitem | Where {
$_.fullname.length -gt 260

Simple powershell to get list then excute each item of list HELP :)

ok i think this is pretty simple i just don't know the language. if i run
get-scdwjob -computername MYSERVERNAME
i get a nice list of all the jobs, i need to run an enable-scdwjob on each one of those jobs.
i tried figureing out how to do this but nothing is working

Hi Philipzempel,
I’m writing to just check in to see if the suggestions were helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Simple button help needed!

I want to make a simple round button that glows when you
mouse over it and depresses when you click it.
Apparently to do this I need to use Filters to make the glow
and bevels. But Filtersonly work on movie clips, buttons and text.
So I make a circle and convert it into a button symbol
(Btn1). Then I make another button symbol (Btn2) and use the first
button symbol (Btn 1) on the Up Over and Down frames of Btn 2.
Assorted Filters are applied to Btn 1 on the Up Over and Down
frames to get the effects I want.
I test the button (Btn2) using Enable Simple Buttons. It
works perfectly - glows on mouse over and depresses on click. Then
I try Test Movie -- and the button doesn't work!!!
Not does it work when exported as a SWF file!!!
I watched a tutorial video that came with my Flash Pro 8
Hands-On-Training (HOT) book and he used pretty much the same
technique -- except he only tested his button with Enable Simple
Buttons. I'll bet my house his didn't work with Test Movie either!
The stupid thing, is I was just able to achieve exactly what
I wanted very quickly using LiveMotion 2!
What is wrong here? Why is it so impossible to create a glow
button in Flash? Why has it been easy in Live Motion for years?
All help appreciated!
Thanks
craig

I thought the nesting button situation might be the problem
BUT there is no other way to apply Filters to Up, Down, etc. Also,
a freaking tutorial book described that as a valid method, but
obviously it ain't.
I tried using movieclips as well but basically had the same
problem.
I mentioned LiveMotion 2 because that ancient program can do
easily what Flash Pro 8 seems incapable of.
What is the logic behind not allowing Filters to be applied
to simple graphics? It's absurd!
There's got to be a way...

Simple Button Help

Hi
I am new to flash and having a bit of trouble. All I would
like to do is be able to create a button and have that button
navigate to a frame.
What I am doing now is:
Insert - New Symbol - Button and name the button (ex: about)
Go through the up/over/down/hit steps and return to scene 1
I then drag the about button onto the stage
I give the about button the instance name of about_btn
In the action layer, I enter the following code:
stop();
_root.about_btn.onRelease = function(){
gotoAndStop("about");
"about" being the keyframe I would like to go to
When I test the button, I get error 1120: "Access of
undefined property onrelease".
I am working on adobe flash cs3 on a pc. I know this is a
very simple issue and any help would be greatly appreciated.
Thank you.

what have you done so far? what don't you know how to do?
where are you stuck at? need way more detail to help any
further.

Both side chatting with simple GUI ,,helps pls?

guys I'm Java application programmer i don't have well knowledge in network programing ,,my question ,,,from where should i start to design a simple GUI client*s* server chat program ,i mean some thing like simple yahoo messenger the program should include also adding contact and make that contact appears ON if he login or OFF if he sign out like red color for ON-line contact and and white color for off-line contact ...........
another thing that chat system should include shared folder all the contact can enter it and upload file or download file ...
please guys i run to you to help me i have 2 weeks only to do that thing please don't let me down i need your help ....TIPS,code,any thing full code :) ,,any thing will be really appreciated .
guys for more information the program includes only the chat of course its both sides chat between the clients and these is no conference room
or audio or video nothing ,,just text only nothing else except the folder shearing service and the colors of the contacts for login or not .
guys once more help me give me codes or any thing useful i count on you guys.
thx a lot in advance
RSPCPro
Edited by: RSPCPRO on Oct 3, 2008 6:25 PM

RSPCPRO wrote:
Dude , u r right ,,,but still its simple GUI issueI'm not sure why you are getting this impression. It's not a simple "GUI issue." Yes, you can simply create the GUI for this, but will it be functional? No. Furthermore, if it was so simple, why are you posting asking for help?
For an instant message chat program, in addition to GUI programming, you need to know how client / server systems work and you need to implement one. A server should be running on one system and the client(s) will connect to it. The server usually maintains the buddy list and passes the messages to/from different clients. This presents several problems that you will need to solve:
1. How will you develop a protocol between the client / server for communication?
2. How will you authenticate users?
3. How will you maintain the buddy list on the server (data structure, database, file)?
4. How will you pass messages from one client to another (simple string message, serialized data object, etc.)?
5. etc.
Now, I'm not saying this is "impossible" so please don't take it that way. I'm simply trying to help you realize that there are a lot of factors to consider when developing this type of application.
RSPCPRO wrote:
and for the "FTP?" ,,,its folder shearing as i said earlier every one of your friends can access it not FTP .....Talking about "folder sharing" is a whole other issue. What I meant by saying "FTP?" is, how do you plan on implementing "folder sharing" remotely? One option is FTP. How would you do it?
RSPCPRO wrote:
and one thing please don't assume any thing u don't knowIf you ask a very broad question and ask for code, I can only assume one thing.
RSPCPRO wrote:
be cooler with others and u will get what u want.I agree. You should take your own advice. I'm not the one looking for help, you are.
RSPCPRO wrote:
thx dude for ur advice and for the link have a good day.You're welcome, and good luck.

Simple viewer help

Hi all, I need your help. I have created my website, and I'm linking it to mobile me galleries. (no problem). But-- instead of mobile me galleries I would like to link to Simple Viewer.
No problem creating the SV galleries in iphoto , but getting them on my site is baffeling.
I have read all the posts, and have had no success. I am a novice and the nominclature is rough
As I said , I created the gallery folder and placed it in the sites folder on my idisk. when I click on the index folder within the gallery appears and the address is file:///Volumes/rgardnerimages/Web/Sites/slideshoe/index.html nothing I do is linking it to a web page. Any help in simple language would be helpful.
My website is http://www.richardgardnerphotography.com/RichardGardner/richard_gardnerhome.html
Thanks in advance
Richard

Its so long since I did this that I to look back and see where my files were uploaded and how they are organized.
Its seems I have the following files uploaded to the main folder on my server:
flash_detect.js
image data.xml
images
PostCard.html
thumbs
viewer.swf
PostCard.html is the index.html file renamed so that it doesn't conflict with the index.html file generated by iWeb.
If you are using MobileMe to publish you can upload these files to the Finder/Go/iDisk/My iDisk/Web/Sites folder and the URL will be..
http://web.me.com/username/PostCard.html
Its probably better to upload them to your website folder. The path is Finder/Go/iDisk/My iDisk/Web/Sites/WebsiteName folder and the URL for the link to it will be ....
http://web.me.com/username/WebsiteName/PostCard.html
These uploads are done by drag and drop. Follow the path from the Finder/Go menu or do Shift - Command - I from any Finder window and then double click the Web then the Sites folders to get to your actual website folder.

Simple Java help

OK, I'm new to Java programming and have a project due in class next week. I'm writing a simple gradebook program that takes a grade for a term paper and a pass/fail for two essays and computes the result. I know that the visual portion of this works so I won't bore you all with that. I think the problem is somewhere in the syntax of my actionPerformed function. Here it is
String essayResult1 = essayBox1.getSelectedItem();
String essayResult2 = essayBox2.getSelectedItem();
int essayPoints1, essayPoints2, termPoints;
if(essayResult1.equals("Pass")) essayPoints1=15;
if(essayResult2.equals("Pass")) essayPoints2=15;
Character letterGrade = termField.getText();
if(letterGrade.equals("A")) termPoints=70;
else if(letterGrade.equals("B")) termPoints=60;
else if(letterGrade.equals("C")) termPoints=50;
else if(letterGrade.equals("D")) termPoints=40;
else if(letterGrade.equals("F")) termPoints=0;
else {
outputField.setText("Error");
return;}
String finalScore=new String("" + (essayPoints1+essayPoints2+termPoints));
outputField.setText("Done");
I would appreciate any help you experienced programers have. Even a hint as to which lines I'm mangling would be of great help.

If you could put [code] and [/code] tags around your code it would be much more readable.
So what is wrong? Do you get a compiler error? Does it give you incorrect results? Do you receive a run-time error?

Simple Recursion help!

i know this is trivial code, that is simple yet i cant get it
i have the following method
public static void let(char x){
if (x == 'a')
return;
x = (char) ((int) let('a' + 1));
System.out.print(x + " ");
here is the error i get
"let(char) in lab7 cannot be applied to (int)
any help will be appreciatied and i will award duke dollars to it
thank you

One more thing: the call let('a'+1);
You are adding a char (16-bit) to an int (32-bit), so the result will be int. That's why the error message says "let(char) cannot be applied to (int)".
To avoid it, do a cast: let((char)('a'+1));

Simple animation help

Hi all wonder if someone can help. I'm creating a simple board game and i want to slide a character (a image) from one position to another position. So for example if i had a 10x10 grid, i may want to slide from square 2 to square 4 or slide diagonally say from square 8 to square 26. What would be the best way to do this? I've been able to move the character once it reaches a certain square by setting the co-ordinates of the new square to move to, but this instantaneously moves from the square reached to the target square, what i want is a sliding effect, so you visually see the character sliding. Any ideas? Any source would be helpful as well, as there doesn't seem to be much about on this topic on the web!

Search the forum. "Animation" would be a good keyword to use. The suggestions will involve using a Swing Timer so you just calculate each interval location from A to B to set the position of the object as it moves.

Starting game, debugging simple things: help =]

Hi, this is my first post here and I've been playing around with Java for a little less than a year now. I'm trying to create a simple 2d game and need some help in the basics, such as the listeners and double-buffering.
So far I've tried implementing keylistener and using another method but neither are working. When I type space, c = 32 for the scope of keyTyped(), but in the switch of the thread "game," c = 0. So I can't transition form the intro/splash screen into the game.
Also when I skip to case 0, the double-buffering is horrible, it doesn't seem like there is any. On my computer the fillOval() and drawString() keep flickering.
Thanks for the help.
The following is my code in entirety (short but growing):
            TC STUDIOS PRESENTS
||_ \ ||- ] ][ ||\/||   ][ '][' ][ \\ // ||--/
||__/ || \\    \\    // //-\\    ||- ] \\//   ||-
||               \\/\// ADVANCED || \\         ||__|
import java.awt.*;
import java.awt.image.*;
import java.awt.event.*;
import java.applet.*;
<applet code="pwGUI" width = 500 height = 400>
</applet>
public class pwGUI extends Applet implements Runnable, MouseMotionListener //,KeyListener
     int gamestate;
     int mouseX, mouseY;
     char c;
     int pressedKey;
     Thread game, ai;
     //boolean splash;
     Image offscreen;
     Graphics buffer;
     public void init(){
          setBackground(Color.black);
          offscreen = createImage(500,400);
          buffer = offscreen.getGraphics();
//          addKeyListener(this);
          addMouseMotionListener(this);
          //splash = true
          gamestate = -2;
          //load graphics
          resize(500,400);
     public void run(){
          //reset ints
          while(game!=null){
               switch(gamestate){
                    case -2:
                         showStatus("game menu");
                         buffer.setColor(Color.red);
                         buffer.drawString("PRIMITIVE WARS ADVANCED", 150, 50);
                         buffer.drawString("Press SPACE to start",160,70);
                         //splash == false;
                         gamestate = -1;
                         break;
                    case -1:
//                         showStatus(String.valueOf((int)c));
//                         showStatus("start" + (char)0 + "end");
                         if(pressedKey == ' ')
                              showStatus("c is: start" + (char)c + "end");
                         if(pressedKey == ' '){
                              gamestate = 0;
                              showStatus("gamestate");
                         break;
                    case 0: // Prepare for new game
                         //showStatus("Start game");
                         buffer.clearRect(0,0,500,400);
                         buffer.setColor(Color.red);
                         buffer.fillOval(mouseX, mouseY, 20,20);
                         buffer.drawString("Playing game",10,10);
                         break;
               buffer = offscreen.getGraphics();
               repaint();
     public void start(){
          showStatus("hello");
          if(game == null){
               game = new Thread(this, "game");
               game.start();
               showStatus("Starting thread");
     public boolean keyDown(java.awt.Event evt, int key)
          pressedKey=key;
          return true;
     public boolean keyUp(java.awt.Event evt, int key)
          pressedKey=0;
          return true;
     /** Handle the key typed event from the text field. */
/*     public void keyTyped(KeyEvent e) {
          char c = e.getKeyChar();
          showStatus(String.valueOf((int)c));
          //if(c == ' ')
          //     showStatus("typed space2");
     /** Handle the key pressed event from the text field. */
/*     public void keyPressed(KeyEvent e) {
//          showStatus(String.valueOf((int)c));
//          showStatus("pressed");
//          displayInfo(e, "KEY PRESSED: ");
     /** Handle the key released event from the text field. */
/*     public void keyReleased(KeyEvent e) {
//          showStatus(String.valueOf((int)c));
//          displayInfo(e, "KEY RELEASED: ");
     public void mouseMoved(MouseEvent me){
          mouseX = me.getX();
          mouseY = me.getY();
          showStatus("moved " + mouseX + ", " + mouseY);
     public void mouseDragged(MouseEvent evt){
     public void loadMap(int mapnum){ //maybe instead param (string map)
     public void paint(Graphics g){
           g.drawImage(offscreen,0,0,this);
     public void update(Graphics g){
          paint(g);
}

You problem with keyTyped is scope problem.
Because you declare char c inside keyTyped, it masks the declaration of char c that has class instance scope.
All you need to do in keyTyped() is remove the char in front of the declaration to unmask the instance variable.
     public void keyTyped(KeyEvent e) {
// should be          char c = e.getKeyChar();
          c = e.getKeyChar(); // this line uses c declared above
          showStatus(String.valueOf((int)c));
          //if(c == ' ')
          //     showStatus("typed space2");
     }� {�

Simple transitions help for an FCP newbee

Am moving from iMovie6 to Final Cut Pro 5 as I didn't like iMovie8 and there's been a lot of talk on the iMovie board about how FCP will probably work better for people like me...
I'm a real newbee to FCP so I'm going to embarrass myself here and ask a really simple question that I can't for the life of me get an answer to.
How do you add a simple fade up to the start of a clip? It would seem that the Fade in-Fade out Dissolves in Effects is designed to join two different clips. I have a clip that cuts to black and the next clip I want to start on a fade up from black.
How do I do this?
Also, how do I do a really simple fade to black???
Forgive me for asking such a dumb question but I just can't find the answer in the Help file (guess the question is way too simple!).
Thanks!

I just tried ramping the clips opacity and I got my fade in just fine, but in order to get the clip fading in from black, I had to go back to the rushes, reselect the clip I wanted and then when the cursor was at the start of the clip, open the opacity and adjust it to go from 0 to 100 in 12 frames. Then I added this clip to my timeline via overwrite, thereby overwriting the same (old) clip that didn't have the fade in. However, I'm not quite ready to mark this question as answered as how do I now add a fade in on a clip that is already in my timeline? Do I have to make the transition decision before I add the clip to the time line or is there some clever way of adjusting the opacity of the clip once it is in the time line and therefore in the edit?
Thanks!

Should be simple, pls help - selectOneChoice valueChangeEvent not fired

Hi all, please help! This should be so simple and just work, but I couldn't get it after hours!
I have a simple selectOneChoice tag in my jspx page, with two selectItems with static values - nothing fancy. I just couldn't get the valueChangeEvent associated to it to fire. I have read many posts here, some say that's how it works if the backing bean scope is request because it's got reset back to the default value each time so value never got changed. Yes my backing bean is set to request scope, but it didn't look like it tried to set the default value every time I submit the form, when I tried to set the value to a variable in the backing bean and its getter didn't get called after the form is submitted (it got called the first time the page loaded). For other reasons, I can not set the bean scope other than Request. Please help if you have an idea -
<tr:selectOneChoice label=""
binding="#{backing_eef_expenseapprove.selectOneChoice1}"
id="selectOneChoice1"
unselectedLabel="#{resources['ets.select']}"
valuePassThru="true"
value=""
autoSubmit="true"
valueChangeListener="#{backing_eef_expenseapprove.valueChangeApprove}">
<f:selectItem binding="#{backing_eef_expenseapprove.selectItem3}"
id="selectItem3"
itemValue="1"
itemLabel="Approve"/>
<f:selectItem binding="#{backing_eef_expenseapprove.selectItem4}"
id="selectItem4"
itemValue="2"
itemLabel="Reject"/>
</tr:selectOneChoice>
By the way, I used JavaScript alert to test the values are actually changed every time I switch the dropdown.
Just in case you are wondering, the application was a 10g ADF app, migrated to 11g, all components are now Trinidad. As far as I can tell, that shouldn't matter.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If basic troubleshooting fails to resolve the issue, the next step is to take the device to Apple or an Apple Authorized Service Provider for evaluation.
Apple does not repair devices.
iDevices are not user servicable.
Any attempt by a 3rd party to repair the device will void the warranty and all rights to support from Apple and these forums.

Simple viewer help needed please

I need help with this exact problem please which was posted by Kirby on 9th Feb
I can't save into the idisk/web folder although I can copy the files over after they refuse to open (if that means anything)...
"This is for Old Toad. I checked out your demo site which is awesome. I read the tutorial,
Examples of SimpleViewer and Flash Album Exporter Slideshows (plugins for iPhoto)
ADDED USING HTML SNIPPET AND IFRAME
This was great but I am still running into a roadblock. The issue seems to be that in the URL that is given on your demo page...
http://web.me.com/youraccountname/slideshow folder/index.html
....it says to enter my account name (which I did).
I am uploading the simple-viewer folder to my iDisk using the Go menu but inside of the Web/Sites folder there is no folder called Slideshow Folder. So am I right in thinking that the URL has nothing to point too because that folder isn't there? Why isn't it there? And is there anything I can do to solve this? Is there another place the simple-viewer folder should be on my idisk?"

Hi:
When you create the simpleviewer slideshow with iPhoto's plugin there should be a folder created on your HD that contains the items seen in the screenshot below:
The folder was named simpleviewer because that's what I named it during the export from iPhoto. That's the same folder as I refer to as "Slideshow folder". It can be whatever you name it when exporting from iPhoto. Upload that folder to your iDisk/Web/Sites folder as shown below:
In the iFrame code use the following URL to the index.html file inside the simpleviewer folder:
http://web.me.com/YourMMe_AccountName/simplerviewer/index.html
That should do it.

Simple powershell help

Similar Messages

Maybe you are looking for