Simple (probably dumb) question about Mail --

After I read a message, how do I go the next message without closing the current message box and going back to Inbox? That is, is it possible to read a message then go to the next one, then the next one, etc. without going back to the Inbox?
Thanks for any help.
Sunil

you can read a message from the message list, by reading in the preview pane. if you do not have the preview pane set on your main window, go to the bottom of the window, you will notice a line with a dot at the middle, drag that dot to the middle of the window or a little higher and drop it. you should now have your main window divided in two, with the upper part showing the message list, and the lower part showing the text of the email you have selected in the message list.
hope this helps

Similar Messages

Dumb Question about multiple BSSIDs

This is probably a dumb question, but enquiring minds want to know...
When using Yosemite's built-in Wireless Diagnostics scan I see many unique WiFi BSSIDs (MAC addresses) associated with my Time Capsule: 5 for my Guest Network and 6 for my "main" network. I see that not all have the same 802.11 protocol, but not all have unique 802.11 protocols. Also I see my "main" network is the 802.11ac network.
So my questions are:
- Why are there so many different BSSIDs and how should I interpret them?
- Which of these BSSIDs are "relevant" that I should pay attention to?
Thanks,
Kevin

Why are there so many different BSSIDs and how should I interpret them?
The 5 GHz band on the main network is one unique BSSID
The 2.4 GHz band on the main network is one unique BSSID
If you have the Guest Network setup......
The 5 GHz band on the guest network is one unique BSSID
The 2.4 GHz band on the guest network is one unique BSSID
If you have multiple AirPort routers, repeat the information above for each router.
Which of these BSSIDs are "relevant" that I should pay attention to?
Personally, I pay no attention to this, but some users place great importance on this.
The BSSID tells you which AirPort.....if you have multiple AirPorts....and which band....2.4 GHz or 5 GHz.....that you are connected to at the current time....as well as whether you are connected to the "main" network, or the "guest" network.....if you have enabled the guest function.

Dumb question Mac Mail inbox synchronisation

I'm really sorry if this is a dumb question...I have just started using Mac Mail (from Entourage) with a .Mac account and want to synchronise my messages across my two Macs. I thought that if I deleted messages on one mac, they would be deleted from the server and when I checked mail on the other Mac they would be gone. However, this does not seem to be the case - instead, I need to delete them on both macs. Is something in my setup wrong?
Thanks for any help

I haven't....are you saying you think I should? Funnily enough, after never having had a problem before, I had a problem syncing my bookmarks yesterday, so maybe I should resetting the SyncServices.
Also, on the .Mac preferences - does it matter if the syncing schedule is set to be automatic, every hour, manual etc? Previously I had it set as manual, but maybe I need to set it as automatic?
Thanks again so much for your help.

[Theory] A simple but hard question about OO programming

I was in my first class of OO programming (4th year of computer engineering in Valencia) and the professor gave us homework.
The homework was a simple question about OO programming (it is not about a specific language, though we are going to use Java in the practice sessions), we shall find an answer to it and discuss it in class the next day.
The question was:
"May classes also be objects?"
which can be said as:
"May classes be instances of an(other) classes?"
I hope that you, archers, can enlighten me in this question

tvale wrote:I believe an object is an instance of a class.
Yup, that's true. Let's see... An object is an instance of a class, so we can have a lot of objects coming from one class.
We can say an object is not a class because it has a state (think about a light, it has a state: on or off, but a class light is not on/off, because in a class we just describe the behavior that class should have.
But what we're asking here is if a class can have a state. I think it may refer to static properties about the objects.

Dumb question about browser dectection

I have a web application that looks awesome in IE but in Firefox it looks clunky and blocky. What I need to perform is a validation to see what browser the client is using. I have done this before on simple html pages javascript browser sniffing. Well it seems that I can't for the life of me to be able to get this working in Creator.
My web project is a Sun Creator Web application. My OS is Windows
Does anyone have any idea or references that you could supply to me?
The following code works in an html environment but in a jsp I cant get the different style sheets to work.
document.write("<link id="link1" rel="stylesheet" type="text/css" href="/WebDemoExtractor/resources/introductionFireFox.css" /> ");
U jave tried many variations of the following
document.write("<ui:link binding='#{introduction.link2}' id='link2' url='/resources/introductionFireFox.css'/>")
I have tried performing many variations with the the above and I have had no success.
Is it even possible to perform this function??
Thank you

jackiepanpan wrote:
Not a dumb question at all.
I think you mean how is it possible to view YouTube videos in Safari on iPad, right?
Basically, YouTube senses the browser you're using. Because Safari on iPad doesn't support Flash, YouTube delivers the movie in a format the iPad can play (like H.264, as a previous post mentioned). This happens with YouTube videos embedded on other web sites, too.
I hope this helps.
I was in an Apple Store a few days ago, and a teenage kid really wanted an iPad. His dad said, "but it doesn't play flash, so you won't get to see YouTube videos that you love." Kid said, something expletive deleted.
The son then picked up the iPad, and he clicked on the YouTube icon. Walked out of the store with it. Sales guy and I laughed. Made my day.

Probably Dumb question

Hey all, this is prolly a dumb question but I could not find anything in the owners manual about the onboard lan for the K8nNeo platinum2. I was just wondering why there are 2 RJ-45 jacks. In the manual it says to hook up either one. And would there be any benefit to hooking up both of them to my router? Thanks in advance.

I think you misunderstand the Aperture process. When you export, you use presets which can resize an image to anything you want. There is no reason to resize inside Aperture as that is contrary to the non-destructive editing philosophy (ie, we don't change the master image for any reason, and if we need to for some reason, we will create a copy in another format first). Resampling down unavoidably reduces the information the image. It is certainly destructive.
If you create an export preset with the settings you want, including resizing, that will do the trick.
Alternatively, you an export the image to the size you want, then re-import into Aperture (and stack with the original if you want). That, at least, doesn't require photoshop.
One of the points of Aperture is the avoid the need to resize, or edit destructively in any way, until export. I can't think of any good reason not to follow Aperture's paradigm on this.

Maybe a dumb question, about which power connectors to use, but....

This may sound like an incredibly dumb question, but here goes anyway....
I upgraded my system a few weeks ago, and will be slapping in a new ATI X850 Pro AGP card in a few days. My current graphics card is a p.o.s. Radeon 9550, so it doesn't have its own power connector or even a fan. My PSU is a dual-rail Antec model, and I'm wondering if it should matter any about how many or which devices I have connected to each power cable set. My psu came with cables to attach, only 2 of the 4 though are the 4-pin molex - the other 2 are pci-e power connectors I believe. Should it make a difference which or how many devices I connect to each cable? For ease of plugging in, I believe my DVDRW and CDRom are using 1 cable, and my ide drive and floppy are using the other cable. Also, I have a pci fan and a case fan running off 1 or the other. I'm likely to jump the power cable for the video card off the one the hard drive is using, unless someone has some suggestion to offer to the contrary.
If it makes a difference, can anyone recommend how they would have them connect?
My list of devices to plug in would be:
1)IDE HDD
2)Floppy
3)CDRom
4)DVDRW
5)Case Fan
6)PCI Fan
7)Video Card
Thanks for any thoughts! SAB - you seem to be the man on builds.....any ideas?

Well, I put the new card in and connected it on a cable with the optical drives. Also, I had unwittingly connected my cdrom on the same ide channel as my hdd , so I changed that so both optical drives are on the secondary ide.
So far, so good. 3dMark03 jumped up from 3300 with an overclocked Radeon 9550 to 10570 with the stock Radeon 850 Pro
I wish I could find some local source to purchase additional molex cords for my Antec SmartPower 2.0 psu, though - I've got 2 more 'outlets' just sitting there on the psu doing nothing, because the other cables are for pci-e, and I'm not using pci-e...... If I could buy some additional molex cables to plug in like the ones that came with it, I could have the vid card on its own cable....

A dumb question about wifi...

I'm not as 'literate' as some are when it comes to computer technology...but here is the question...If I walk into a place that has wifi and my iphone is set with wifi ON, how will I know if there is a charge for using the wifi? Will my iphone automatically kick into the wifi or will there appear an invitation to pay a fee to connect...and how do you pay and do you have to have a password and if so, how do you get that? I know....dumb question...Thanks.

Not a dumb question at all.
First of all, set your iPhone up like this:
1) Go to Settings on the main screen (looks like gears)
2) Click on "Wi-Fi" (second option from the top)
3) At the bottom of this page (Which should say "Wi-Fi Networks" at the top) turn "Ask to Join Networks" to the "ON" position.
Now when you walk into a place that has Wi-Fi, your iPhone will display a little window that asks you whether you want to join the network or not.
In some places, you may even see a list of more than one Wi-Fi network to join. This is quite common in New York City. The reason is because so many people have Wi-Fi in there apartments, and they all live so close together, that sometime your iPhone can detect multiple networks. The coffee shop near my apartment has their own network, but I can also connect to the Wi-Fi network in my apartment because I only live about 50 feet away.
Anyway, when you see the list of Networks to join, you may notice a little padlock symbol next to some of them. This means these are closed networks that require a password to connect to. (My network is "Closed", ie requires a password so that everyone in the coffee shop next door doesn't use my internet).
Networks that DO NOT have the little lock symbol are "Open" which means you can join them without a password. But there is a catch... A lot of coffee shops have open networks, but as soon as you try to browse the web, they redirect your browser to their own page, no matter what web address you enter. Basically, they are letting you connect to their network without a password, but not letting you browse the internet without giving them some money.
So (as the previous poster said) the page that the coffee shops redirects you to, usually has instructions, and of course a place to put in a credit card. Once you do all that, then you can browse the internet without getting redirected to their little payment page. Its sort of confusing because you don't need a password to connect to their "open" network, but you do need one to browse any web pages. How you get the password differs from coffee shop to coffee shop, but usually they give it to you right inside your web browser once you give them your credit card number.
T-Mobile provides wireless for Starbucks (at least in a lot of places they do). So once you have an account with t-mobile, you can use it in any starbucks or "T-mobile hotspot"
Now this all sounds kind of complicated, but more and more these days, you can just walk into a place, find an open network (one without a lock next to it) and start browsing without being redirected or dealing with credit cards. Basically these places are providing free internet to try to attract customers.
Good luck
P.S. Wi-Fi eats up battery life. If you aren't going to be using it to browse web pages, you can go into settings, then Wi-Fi, and turn Wi-Fi off. This will save you battery life, but you have to remember to turn it back on. Even without Wi-Fi on, you can still browse the internet if you see a little "E" at the top of your screen. The E stands for the AT&Ts Edge network, which isn't as fast as Wi-Fi, but covers pretty much everywhere that your phone can get a signal.
Message was edited by: erik graham

Another question about mail crashing:

Have a question concerning mail. Cannot recieve/send/delete emails. Even if I delete, emails return after i (force) quit the unresponsive program. Also, if i click back and forth between sent, trash and inbox icons, they go blank and then mail won't respond. Attaching console, good luck. Please help, been dealing with this since I got computer. Thanks.
Mac OS X Version 10.4.5 (Build 8H14)
2006-02-20 13:02:52 -0600
2006-02-20 13:02:55.951 GimmeSomeTune[213] * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
2006-02-20 13:03:01.945 System Events[230] .scriptSuite warning for attribute 'currentUser' of class 'NSApplication' in suite 'SystemEvents': 'Accounts.User' is not a valid type name.
2006-02-20 13:03:01.945 System Events[230] .scriptSuite warning for to-many relationship 'loginItems' of class 'NSApplication' in suite 'SystemEvents': 'logi' is not the Apple event code of any known scriptable class.
2006-02-20 13:03:01.945 System Events[230] .scriptSuite warning for to-many relationship 'localUsers' of class 'NSApplication' in suite 'SystemEvents': 'uacc' is not the Apple event code of any known scriptable class.
Waiting for MirrorAgent to launch and respond to CFMessagePortCreateRemote(). [82]
Feb 20 13:13:06 iMac-G5 mDNSResponder: ERROR: recvSetupResponse - bad op 2
2006-02-20 15:11:31.682 Mail[251] Unread count went negative for mailbox INBOX
2006-02-20 15:11:32.290 Mail[251] Unread count went negative for mailbox INBOX
2006-02-20 16:07:18.976 Safari[300] * Assertion failure in -[BrowserApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], AppKit.subproj/NSApplication.m:3056
2006-02-20 16:07:18.976 Safari[300] Uncaught exception - Modal session cannot be run during application termination
2006-02-20 16:07:18.976 Safari[300] * Attempt to remove unrecognized exception handler 0xbfffb640
2006-02-20 16:07:35.061 Mail[269] Empty or duplicate identifier ("com.mac") for plist at path: /Library/Mail/AccountTypes/com.mac.mailaccounts/MailAccounts.plist
2006-02-20 16:12:00.038 DashboardClient[308] /SourceCache/JavaScriptCore/JavaScriptCore-417.8/bindings/objc/WebScriptObject. mm:211:[308] JavaScript exception: Can't find variable: timer
2006-02-20 16:12:00.171 DashboardClient[308] /SourceCache/JavaScriptCore/JavaScriptCore-417.8/bindings/objc/WebScriptObject. mm:276:[308] JavaScript exception: Can't find variable: timer
2006-02-20 16:12:14.467 DashboardClient[308] /SourceCache/JavaScriptCore/JavaScriptCore-417.8/bindings/objc/WebScriptObject. mm:211:[308] JavaScript exception: Can't find variable: timer
2006-02-20 16:23:30.055 Mail[318] Empty or duplicate identifier ("com.mac") for plist at path: /Library/Mail/AccountTypes/com.mac.mailaccounts/MailAccounts.plist
Mail Help
2006-02-20 16:28:35.342 Help Viewer[326] Exception raised during posting of notification. Ignored. exception: * End of archive encountered prematurely at 400
2006-02-20 16:29:23.296 Mail[325] Empty or duplicate identifier ("com.mac") for plist at path: /Library/Mail/AccountTypes/com.mac.mailaccounts/MailAccounts.plist
2006-02-20 16:33:01.261 Mail[330] Empty or duplicate identifier ("com.mac") for plist at path: /Library/Mail/AccountTypes/com.mac.mailaccounts/MailAccounts.plist

Solved myself.

Dumb question about user_sdo_geom_metadata DIMINFO entries

I'm sure that this is a dumb question!
I create a new entry in user_sdo_geom_metadata as follows...
INSERT INTO USER_SDO_GEOM_METADATA
VALUES ( 'PR_A', 'GEOM',
MDSYS.SDO_DIM_ARRAY(
MDSYS.SDO_DIM_ELEMENT('X',190000.0,640000.0, 0.05),
MDSYS.SDO_DIM_ELEMENT('Y',120000.0,680000.0, 0.05)
NULL );
But when I select the DIMINFO from the table...
SQL> select diminfo from user_sdo_geom_metadata a where table_name = 'PR_A';
DIMINFO(SDO_DIMNAME, SDO_LB, SDO_UB, SDO_TOLERANCE)
SDO_DIM_ARRAY(SDO_DIM_ELEMENT('X', 190000, 640000, 0), SDO_DIM_ELEMENT('Y', 1200
00, 680000, 0))
The sdo_dim_element and sdo_tolerance
elements show no decimal places.
Is this because I have not set some
display number format option in SQLPLUS
or for some other reason?
regards
Simon

Simon,
If you are using an old sqlplus client
(815) then you won't be able to see the decimal places in the diminfo object.
But if you hace a newer (816/817) sqlplus
client you should be able to see the decimal places.
If you are not seeing them in these clients
then there might be some format paramter set
to show numbers without decimals.
You can do a
show numformat
in sqlplus to see if there is any format set for that paramter.
null

A Simpler, More Direct Question About Merge Joins

This thread is related to Merge Joins Should Be Faster and Merge Join but asks a simpler, more direct question:
Why does merge sort join choose to sort data that is already sorted? Here are some Explain query plans to illustrate my point.
SQL> EXPLAIN PLAN FOR
2 SELECT * FROM spoTriples ORDER BY s;
PLAN_TABLE_OUTPUT
|   0 | SELECT STATEMENT |              |   998K|    35M| 5311   (1)| 00:01:04|
|   1 | INDEX FULL SCAN | PKSPOTRIPLES |   998K|    35M| 5311   (1)| 00:01:04|
---------------------------------------------------------------------------------Notice that the plan does not involve a SORT operation. This is because spoTriples is an Index-Organized Table on the primary key index of (s,p,o), which contains all of the columns in the table. This means the table is already sorted on s, which is the column in the ORDER BY clause. The optimizer is taking advantage of the fact that the table is already sorted, which it should.
Now look at this plan:
SQL> EXPLAIN PLAN FOR
2 SELECT /*+ USE_MERGE(t1 t2) */ t1.s, t2.s
3 FROM spoTriples t1, spoTriples t2
4 WHERE t1.s = t2.s;
Explained.
PLAN_TABLE_OUTPUT
|   0 | SELECT STATEMENT       |              |    11M|   297M|       | 13019 (6)| 00:02:37 |
|   1 | MERGE JOIN            |              |    11M|   297M|       | 13019 (6)| 00:02:37 |
|   2 |   SORT JOIN            |              |   998K|    12M|    38M| 6389 (4)| 00:01:17 |
|   3 |    INDEX FAST FULL SCAN| PKSPOTRIPLES |   998K|    12M|       | 1460 (3)| 00:00:18 |
|* 4 |   SORT JOIN            |              |   998K|    12M|    38M| 6389 (4)| 00:01:17 |
|   5 |    INDEX FAST FULL SCAN| PKSPOTRIPLES |   998K|    12M|       | 1460 (3)| 00:00:18 |
Predicate Information (identified by operation id):
   4 - access("T1"."S"="T2"."S")
       filter("T1"."S"="T2"."S")I'm doing a self join on the column by which the table is sorted. I'm using a hint to force a merge join, but despite the data already being sorted, the optimizer insists on sorting each instance of spoTriples before doing the merge join. The sort should be unnecessary for the same reason that it is unnecessary in the case with the ORDER BY above.
Is there anyway to make Oracle be aware of and take advantage of the fact that it doesn't have to sort this data before merge joining it?

Licensing questions are best addressed by visiting the Oracle store, or contacting a salesrep in your area
But I doubt you can redistribute the product if you aren't licensed yourself.
Question 3 and 4 have obvious answers
3: Even if you could this is illegal
4: if tnsping is not included in the client, tnsping is not included in the client, and there will be no replacement.
Tnsping only establishes whether a listener is running and shouldn't be called from an application
Sybrand Bakker
Senior Oracle DBA

Questions about Mail

Hi everyone. I'm new to Macs, just converting from a Windows PC, and was just curious about mail settings for my POP account. Is there a way to set it up so that mail will delete the email messages from the server after it downloads them from the mail server similar to what Microsoft Outlook does. Thanks in advance for the help. I have an iMac Intel w/ OS X 10.4.7 if that helps.

Hello Dave.
Go to Mail > Preferences > Accounts and under the Advanced tab for the account preferences, select "Remove copy from server after retrieving a message:" and below the options are:
Right away
After one day
After one week
After one month
When moved from Inbox

Dumb question about cycling a battery. Sorry!

I just received by new mac book pro replacement battery today and I have some questions regarding it. First of all, my original battery lasted 2 yrs, 2 mos. I purchased another apple battery for my 15 inch mac book pro (computer originally purch. Aug. 2007). I've seen on these boards that I'm supposed to "cycle" the battery once a week to get the maximum life out of it. I think a cycle means using the battery until it's power is used up and then charge up to 100% again. Is that right? Anyway, my question is, "What is the proper care for this new battery? Does it damage it to have it plugged in when it is fully charged? Or should I always keep it unplugged and use the battery until it runs out and then charge it again? And what does it mean to cycle it once a week, if I'm already using the battery and recharging it when needed?" Sorry if these are dumb questions. I'm not really computer savvy! Thanks.

You should use the battery for a while every day but not drain it right down, before re-connecting the power and re-charging it to 95%+ this is not a complete cycle but partial/normal cycling.
_Every couple of months_ you should re-calibrate the battery which means you keep using it until it goes into emergency sleep itself (you will see a warning then 5 minutes later it will go off by itself) and then _leave it in this state for at least 5 hours_ before you re-connect the power supply and fully charge it (without unplugging) - this is a proper re-calibration.

SUPER SIMPLE DUMB Question about hard-wired desktop mac and wifi for iPhone

Sorry if this has been already answered a million times. I have a desktop mac with a cable modem ethernet internet connection. I want to leave this hard-wired and setup a wifi network for a laptop or iPhone. What's the cheapest easiest way to do this?? I've never done anything wireless before.

Could I just somehow split the feed from the the cable modem or ethernet cable and route part of it into an AirPort express??
Unfortunately, no. This would create "confusion" for the modem as it is only expecting a single device to be connected to it. To be able to support both wired & wireless clients, you would need an Internet router with a built-in Ethernet switch, like the AirPort Extreme Base Station. If cost is an issue, you do NOT have to use an Apple router. There are a number of other vendors, like Belkin, D-Link, Linksys, & Netgear, to name a few, that offer similar models.

A very dumb question about sharing preview in an iPad

Hi, folks
I have to share some content I have made in some iPad devices. I am taking about a dozen of people, some of whom I don't even know.
To test all this, I have reloaded in Folio Builder the content with our shared user account (ie: not mine) and now I want to test this sharing with myself, to see that in my own account and my own iPad.
However, I see that this seems not to be possible. As fas as I have been reading posts here and there, each user has to start session with that shared account and then download the folio. Afterwards, they can restart with their own account and still see the folio, as it has been downloaded to their devices...
Is that right? I mean: is there no other way but sharing the account and password with every individual likely involved? That gives me the creeps, to be honest.
Thanking you in advance for all your patience
Gustavo (Posting from Madrid).

Yes, Bob I thought that was the way
But I am a bit dumb-stuck in this. The user... let's say [email protected] has shared it and I have received his e-mail in my iPad. I have my account, let's say [email protected]
How do I see / download it in the iPad?
I must be a bit overworked to see it, sorry if so.
Gustavo

Simple (probably dumb) question about Mail --

Similar Messages

Maybe you are looking for