Simple question (?) about monitor size

I'm trying to work out what monitor I would need to view 1 or 2 A4 documents at 100% viewed in vertical/portrait.
Will Apples 23" be sufficient, or would the 30" be neccesary?

That's right. A few applications let you enter the actual dpi of the screen so that 100% shows 100%. But not many apps do, so one inch on the screen ruler rarely matches up with one inch on paper. Apple's Scalable User Interface technology may in the future allow us to calibrate the screen to take the actual display dpi into account at the system level. Maybe in Leopard.

Similar Messages

Simple Question about 'Monitor Clients' on WCS

Hello
When I use WCS and go the 'Clients' tab on the Home page and then click 'Associated Clients' it shows me a whole list of usernames/MAC adresses/ip addresses/ etc.
One of these column titles is 'Protocol'.
On some of my entries there is an AP with a MAC of 00:00:00:00:00:00 (which I know is a cosmetic bug that is not resolved by Cisco) but its 'Protocol' state is show as 'Mobile' rather than 802.11b or 802.11g.
Does anyone know why the 'Protocol' is classed as Mobile? What does it mean, if anything?
thanks
Bryn

Hi I read your post. I see the "mobile" status of clients on my network when they are being forwarded from another wireless controller via a mobility group. I use this feature for our guest network. Do you have any of your WLC's in the same mobility group or any kind of guest network?

Simple question about mount and delay script

Hello, I have a simple question about mounting volumes on start up.
My computer wakes up auto - and then auto there are serveral applescript tasks (mount and start up programs)
I use this script (daily) for serveral connections with external volumes I always need the connect to. ( In the script I use this code 3 times for other locations) I do this on start up.
set Uname to "XXX"
set Pword to "XXX"
set someVolume to "afp://XXX.XXX.XXX.XXX/XXX/XXX
mount volume someVolume as user name Uname with password Pword
(same code for 2 other locations)
When i do this on start up sometimes the script says there is no connection possible. I guess it's because on start up the connection isn't there. And 1 minute later when computer is total ready the connection is ok. When I run the script then It works. Just sometimes ( In the morning) 'It' want to connect but the script stops. When i do it manually(I run the script again) it works just fine.
Is it possible that I need a delay? Can someone explain this?
How would I make a delay handler for this script? Is that the best solution?
Thanks in advance. This is something small i'm wondering about.
Colin

BTW, If you saved the script as an application +(and not as an application bundle)+ you could drop the script on to *Drop Script Backgrounder* (freeware).
Then the script would run in the background, so, you wouldn't see it running in the Finder.
<http://www.macupdate.com/info.php/id/7922/drop-script-backgrounder-x>
Tom

A simple question about combo box

Dear All,
Just got a simple question about combo box: I have one of these selectors with labels based on filtered rows from a table.
Is it possible to have one more label that would select all options?
Like:
Product A
Product B
Product C
All Product
Many thanks for your help!
Gilles

Hi Gilles,
The purpose of ComboBox itself to select single option out of many.
For your purpose, you may have to use "List Builder" which can accomodate 1 or more to select.
Please revert for more clarification if you need.
With best wishes
BaaRaa.

A simple question about performance!

Hi! I have a simple question about performance. Suppouse that you have a servlet or a class with DB access, and you need to use a value several times in that page. What is best, to assign the value from say, a resultset or a request.getParameter() to a variable or to call the resultset or the request every time you need to retrieve that value? Which option uses less memory, which is faster, etc.?
Hoping the best fou u
Raul

If you need more values from a db, the best is to open some connections (connection pool) and use the for accessing the db.
To get the data only once, open the connection, get the data, store the data whereever you want: variable (class), hidden control (if you want to send from one page to another by request) and close the connection as quicky as possible.
The advantage of the first method is that the most time consuming activity (connections opening) is done only once.

3 questions about texture sizes

Hi there all,
I have 3 questions about texture sizes. First off, after
doing a search in this forum, I found out how to find the maxium
texture size my hardware can handle. However, this is only
currently tells me what the texture size I should use for my
computer. So basically, what my first question is, I wanted to know
what would be the average texture size for PC's. Why I ask this is
because arfter doing the command that finds my maxium texture size
that my computer can handle, it says that I can handle up to
2048x2048, but this doesn't help if lets say the standard hardware
texture size is 1024x1024.
My second question is, when you speak in maxium hardware
texture size terms, is this for per object, per scene that is
loaded into memory, or for the entire game?
... and my last question is, does hardware texture size also
include basic shaders as well (meaning with no textures)? If not is
there a limit on that as well?

1. If you know what maximum texturesize the endusers
graficcard can handle, you can build a switch to different *.w3d
files with that are saved with different texturesizes. you can see
how the hardware variates:
http://nuttybar.drama.uga.edu/pipermail/dir3d-l/2005-September/009554.html
but don't forget that the macs are limited at the moment to a
maximum texturesize of 512x512. If the textures are bigger then the
maximum texturesize they are scaled down to it. In your example a
texture that is 2048x2048 would be scaled down to 1048x1048 if this
is the maximum texturesize of the endusers machine.
2. The maximum texturesize is per Texture. But the Textures
are stored uncompressed in the VRAM of the graficcard. There is no
way to check how much RAM is left and i am not sure what happens if
you put a lot of data in it.
3. A shader only layers textures like photoshop and renderes
them depending on the settings of the shader. The maximum hardware
texture size only limits the size of the texture, if you use no
textures in the shader (setting all texturelayers to void) the
model will be only rendered depending on the values that are given
by "ambient", "emissive", "diffuse", "specular"
Just want to add here that textures should be in this sizes:
1x1, 2x2, 4x4, 8x8, 16x16, 32x32, 64x64, 128x128, 256x256,
512x512, 1024x1024, 2048x2048, 4096x4096 ...
but can be also be combined like this:
32x1024 or 512x256 and so on. this is just good to know.
If textures do not fit into this grid of pixel values, the
texture will be scaled up or down to the next size that is closest
to it.
if you type this code into the message window and execute
every line, you can check the resulting texturesize.
global pImage
pImage=image(100, 1000, 24)
member("world").newtexture("image", #fromimageobject, pImage)
put member("world").texture("image").width
-- 128
put member("world").texture("image").height
-- 1024
This will happen to all textures if they enter the
graficcard.

Question about "Print Size"

I am confused and puzzled about "Print Size." First I select the Zoom Tool, then I click "Print Size" in the upper bar. I also have chosen View > Rulers.
What I don't understand is that one inch in the horizontal ruler actually is considerably longer than one inch on the vertical ruler. I think this is distorting the appearance on my photos in the monitor as compared with the actual prints. The monitor version of my portrait, for example, looks fatter than the printed version. Why is this and why isn't a horizontal inch equal to a verical inch for viewing purposes.
Thank you very much for any help on this.
Bob

Thank you very much. I changed my monitor to its native resolution and I think this solved the problem. Bob
J Maloney <[email protected]> wrote:
Change the screen resolution setting in your PS prefs to your display resolution. Then print size will work as expected.
http://en.wikipedia.org/wiki/List_of_displays_by_pixel_density
More about the print size feature:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7935a.html
>

Simple question about flex and AS 3.0

Hi, this might sound like a simple question so I apologize...
I have both a copy of flex 2 and 3, and i want to simply code in AS
3.0 not mxml. I referred to the help of both flex 2 and 3, and all
i could come up with is "you can add dynamic behavior to your
documents using actionscript", which means to me, you only write
your functions in AS and create instances with mxml (...ugh).
personally, i find mxml to be ugly (mainly because it looks like
html to me), and i'd rather not use it. coming from programming in
an IDE in Java, it seems like it would be nicer to have something
similar, all the while having the power and cool features of flash.
I'm not fully educated in this matter so i understand that i could
be totally wrong.
i mean, if i have to code in mxml, i will. i'm a web
programmer for a living, and if a more experience programmer said
something like "if you don't code mxml in flex, you'll never get a
job coding in flex", i would trust the advice, and learn the ugly
code. :)
yes, i do have Flash cs3, it's great but it seems like a pain
to me the way you organize classes.... i've only seen a few
tutorials, ones that explain how you cannot simply import a custom
class, you have tell your movie to link to it, put it in the same
directory, or manually name the package, it's sort of confusing.
my main point here is that i'm very eager to start building
apps in straight AS 3.0 instead of using flash cs3 (for some
projects), and it would be cool to get some help or be pointed in
the right direction.
to simplify:
can i write AS 3.0 and only as 3.0 in flex 2 or 3? how? can
you link me to a tutorial? any advise?
thanks!

Hey William, thanks for the post. It's a great coincidence
because I'm reading that book as well. I'm about half way through
it, and I love it. I installed mxmlc on my linux box and am writing
pure AS 3 apps. I think that's the way to go, though I know it's
not for everybody.
My problem with mxml is that it has a weird syntax for
function calls, and it's not as 'intuitive' for a person like me,
who came from C++ and Java programming in the past. I like writing
programs in the C++ and Java style syntax, and since so many other
languages use a similar syntax, I don't see any reason to learn the
nuances of mxml, unless I was getting paid to do it. As far as I
can tell there is no benefit.
I hate using Flash to write flash apps as well, I feel like
they become messy and confusing, especially when trying to write an
OOP application. I only use it if I want to move an object in a
very specific way and can't do it with the Tween methods.

Question about the size af:inputText

can <af:inputText> grow itself automatically to avoid scrollbar?
if user types a long text into it, the inputtext area will become bigger to fit it to avoid scrollbar. is this possible?
another question is,i found the size of this input area are controlled by 'rows' and 'columns'.
can i make the inputtext area stretch to 100% width of the page?
i cannot use 'columns' to accomplish this, since the page resolution is different for users. it works on 1440x900,but fails on others.
thanks a lot
-Ken

cowbell bill wrote:
Still stumped, I've deleted all unused audio files, deleted all unused midi. Maybe a third of the project. I see nothing in the trash, Project size is still the same 3.25 GB. Bypassed all reverbs, And audio CPU level still maxing out in the red. What am I doing wrong. Thanks Bill
When you speak about project size, do you mean the size of the project file itself? Or of the entire project folder?
When you delete tracks or plugins from your project, you won't see anything in the trash, that is normal. Only when you delete an audio file from your disk +from within Logic+ you'll find that audio file in the trash.

Maybe a simple question about M2T ?

Hi
I record in HDV on the JVC GY 101.
I store on the Focus Enhancements DR HD100 Hard disk recorder.
The footage I have is in HDV 25frames Progressive.
The hard disk stores as m2t file and I seem to need to use Mpeg streamclip to convert for Final Cut Pro HD.
I have a few questions about this.
1) What should i convert to with mpeg streamclip ? mov, dv m2v etc etc
2) What setting should I have on FCP with regards to screen size ? The converted clips are 1280x720. When I choose this setting on the sequence, I end up with small black bars left and right of the video on the canvas ???
3) I will also later have to add some digi beta footage which will be PAL, 720x576 Anamorphic.
4) What is the best resolution for me here ?
5) And will the quality of the original m2t file be downgraded by the mpeg streamclip ?
Thanks so much for your help
All the best
Simon

HDV isn't an "edit-friendly" format, meaning: HDV uses inter-frame compression, combined with a long group-of-pictures (GOP) of 15 frames (12 frames in PAL-equivalent). In intra-frame compression (as in DV, DVCPRO HD, etc.), each video frame is a complete image that stands alone. Inter-frame compression (which is also used in DVDs) uses only a limited number of complete image frames, the GOP determines that number. So, in HDV for example, with a GOP of 15 frames, 1 second of 30fps video contains only 2 complete frames, while the other 28 frames are determined by calculations used in conjunction with the Bi-directional ('B') and Predicted ('P') frames, which contain partial information on the changes in the video in between the 'I' frames which contain whole images. This process, of course, requires much more computer processing power than when editing DV, DVCPRO HD, Uncompressed, etc.
Editing video streams such as HDV (and XDCAM HD) is made difficult by the reduced number of I-frames. For example, if you make a cut in between the I-frames in the video clip, the computer has to then recalculate new I-frames that are placed at both sides of the cut. Converting on capture/after import to an intra-frame codec like DVCPRO HD, ProRes 422, or Uncompressed will reduce processing power and increase real-time performance, as well as give better performance when adding effects and performing compositing like chroma-keying.
A common rule of thumb in professional applications is to acquire in HDV, XDCAM HD, etc., but capture and edit in DVCPRO HD, ProRes 422, or even Uncompressed. Native HDV editing is not taboo by any means; it's just not as easy or robust -- especially with the LONG render times. Depending on what kind of work you do (and of course personal preference), you may not see much benefit by transcoding to another format.
Are you suggesting i have to convert each clip after capture?
Unless you have an HDV deck with HD-SDI and a capture card, you would have to convert each clip. Batch-conversion would be very useful for that.
Hope that helps.
tim

A simple Question about % in CR Chart!

Hi, I have another simple question.
When i use SQL to storage data and wanna Crystal Report to display the data in chart using %
which data type should i use?
float or string?
and I found when i use 0.12 as 12% in database , It could not display in Crystal Report line chart normally.
What should I do??
Please Help!!!
Thank you VERY MUCH!!!

If you have the datatype as string from your database then try adding the string field as a summary field in chart and select maximum instead of count and if you have them in number format then you can directly select the percentage in chart.
Regards,
Raghavendra

Simple question about generate proxy

Hi guys...
This is a simple but a truly simple question....
When trying to create a proxy from our messages interfaces using SPROXY, i'm not able to get the Software component versions that were used from the sld...
Do I have to export them? Or import them?

Hi Goncalo,
Check if it helps...
Re: SW component version not visible in SPROXY
Regards
Anand

Simple question about JAVA path

Hi. I have a simple question , but I spent several hours trying to find an answer.
How do I know the location of the java executable which is used by Concurrent Manager.
I already know that running which java under application user will not give me the correct answer

Maybe you can try like this:
     public String getPath(){
          Class cls=getClass();
          String className=cls.getName();
          String packageName=cls.getPackage().getName();
          System.out.println(className);
          System.out.println(packageName);
          String newClassName=className.replaceAll("\\.", "/");
          String resouceName=newClassName+".class";
          System.out.println(resouceName);
          URL url;
          url=cls.getClassLoader().getResource(resouceName);
          String path="";
          path=url.getFile();
          return path;
     }

A very simple question about WF

hi experts
I would like to ask a question about workflow
as u may know there is 'Loop' step in workflow, but I am confused when should I use Loop?
Is this step used for processing internal table? if yes, why shouldn't I create a custom BOR method and pass the entire internal table to the method?
many thanks

hi
loop step for not process the internal table,
this is used to process the some steps repetely until condition True or False.
we have two loop steps is there
WHILE AND UNTIL.
Thanks
sitaram

Simple question about telnet and characters

Hi all,
We've installed for the first time a SUN machine. So i think it's for a SUN expert a very simple question.
Normally when i type a special character it will be dispayed like " � " [alt+132]
But when i use a telnet session and i type "alt+132" i get a "d" and not "�".
Does someone know where i must start to find out how this works ?
Thanks you very much.
ESP

This is probably related to the locale your server is in. I don't remember the default locale a box is installed in if you don't specify. I think its "C". I use the UTF-8 or en_US.ISO8859-1 locales at home. At work, usually C but sometimes applications may require UTF-8. BEA Weblogic required this for a project a while back. This is defined in /etc/init/tz.

Question about the size of my project

3.25 GB 20 or so tracks. a few plugins each a few software drums and synths. I getting overload warnings here and there. Not the I/O level the audio level. I look at the fear lilly Allen demo which has 50 tracks all sorts of plugins and a vid. 1.45 GB. I selected and deleted unused in audio bin and still the same. What am I missing. Logic Pro, IMAC 3.06 core 2 Duo 4 GB ram. Thanks Bill

cowbell bill wrote:
Still stumped, I've deleted all unused audio files, deleted all unused midi. Maybe a third of the project. I see nothing in the trash, Project size is still the same 3.25 GB. Bypassed all reverbs, And audio CPU level still maxing out in the red. What am I doing wrong. Thanks Bill
When you speak about project size, do you mean the size of the project file itself? Or of the entire project folder?
When you delete tracks or plugins from your project, you won't see anything in the trash, that is normal. Only when you delete an audio file from your disk +from within Logic+ you'll find that audio file in the trash.

Simple question (?) about monitor size

Similar Messages

Maybe you are looking for