Simple question about the Monitor tab in OVM Manager

What are the quantities of the y axis? Memory appears to be MB, but is CPU percent, or load? And what is disk utilization?
thanks,
Peter

Peter Collins wrote:
What are the quantities of the y axis? Memory appears to be MB, but is CPU percent, or load? And what is disk utilization?CPU is load. Not sure what disk utilization is, sorry! I've sent this thread to the Oracle VM dev-list so hopefully someone can tell us. :)

Similar Messages

  • Question about the Zone Tabs.

    ＜Current Situation＞
    I use the Zone Tabs Web Part in SharePoint 2010.
    I am considerring about migration from SharePoint 2010 to Sharepoint 2013(Sharepoint 2010 experience).
    I would like to evaluate whether the Zone Tabs is available in Sharepoint 2013(Sharepoint 2010 experience).
    ＜Questions＞
    #1. I found a article about the Zone Tabs. And there was source codes in MSDN Code Gallery.
    Please check below URL.
    URL：http://blogs.msdn.com/b/bobgerman/archive/2008/02/19/back-in-the-zone-with-zonetabs.aspx
    For the above reasons. My understanding is the Zone Tabs is free Web Part.
    Is it correct or not?
    #2. Could you tell me URL that possible to dowmload the Zone Tabs Web Part in Sharepoint 2013(Sharepoint 2010 experience).
    I look forward to hearing from you.

    Thank you for your reply!
    I would like to ask a question.
    #1. "SharePoint 2010/2013 Tabbed Web Part Zone" is same web part as below.
    URL:http://sharepoint-applications.com/wp-content/themes/thesis/custom/pdf/zonetabsreadme.pdf
    I look forward to hearing from you.

  • A simple question about the Integration process and the PI system

    Hi all
    Out PI system gets more and more slowly .
    in the Monitor I can se that there are many ufinished IP about 100.
    in the Outbound colon there is a Watch icon with the message
    QMessage being sent                     
    and in the graphic of the IP thers is a Send Message Asynchronously  with text in process.
    my question is can those unfineshed IP be guilty in slowing down the system by taking resources, they have been there for quit a long time .
    Thanks

    Hi again
    I have checked sm12 , no locks
    theres is no mapping involved in this step , the IP is trying to send a file to  server.
    I just want to know if  100 unfinished IP slow down the system .
    It does not matter if the file has been sent or not
    is there any way to check those IP if they are taking resources.
    Thanks.

  • Questions about the Galaxy Tab on Verizon

    Hello
    Samsung is saying that the Galaxy Tab is comming to Verizonwireless soon. Rumors are sometime in November. I'm really excited about this product but I'm a little in the dark on some of the features and capabilties Verizonwireless will have for the Tablet when it is introduced.
    Q1. Will I be able to use my Verizon cell phone number with the tablet to make and receive phone calls? If Verizon configures it for cell phone serivce, this device will be an iPad killer. Rumor has it that it is being offered in the UK with cell phoine service.
    Q2. Will it be introduced on Verizons 4G network? May as well start off on the right foot. Again, this will be hugely popular with Verizon customers if it is.
    Q3. When? My contract is up in December and I am looking for a device like this. When does Verizon plan to release the Galaxy Tab?
    Thanks
    JayT

    We don't have any information on this device at this time. Keep in mind you can sign up to receive exclusive online offers, promotions and the latest information on products and services. Click here https://email.vzwshop.com/servlet/formlink/f?NFOQU&SOURCEID=WEB_DGF_VZW_SUPPORTNAV

  • Theoretical question about the monitor

    Hello,
    in my diploma thesis I compare the bw with a reference modell to check wether the bw is a "real" dwh or not.
    The reference describes the monitor as component which observes the source systems and checks for changes to afford incremential loading.
    The monitor of the bw observes the loading processes in the bw.
    So there's a difference. Nontheless there must be further monitor which is conform to the reference, or? I did not find any information about that one.
    Does anyone know about it?
    Tobias

    Hi Tobias,
    as you already know, BW monitor it's not a delta monitor (as your reference describes), but only an administration tool that allows to follow your dataloading...
    Generally speaking, in BW there is no a specific component "which observes the source systems and checks for changes to afford incremential loading" because (but only for delta-capable datasource) this is done in source system itself (and this is the integration concept typical of all SAP products) thanks to different mechanism (timestamp field for some flows, delta queue for others, generic delta and so on)...
    Anyway, even BW has a delta management mechanism, but related to its datamart (loading between an ODS and a cube, for example) only and you can observe it from the changelog table and thanks to ROCANCEL field...
    Hope it helps!
    Bye,
    Roberto

  • Very simple question about the turtle

    I'm kind of new to java, and I'm currently working on a university project involving the wellknown java turtle. Does any of you know how to change the turtle into another thing, like replacing the drawing of the turtle with a jpeg for instance? (I am using Guzdials turtle class)
    Thanks for helping!

    georgemc wrote:
    yawmark wrote:
    georgemc wrote:
    jverd wrote:
    Either the Java turtle is not that well-known, or I'm terribly out of touch. I've never heard of it, and have no idea what you're talking about.Maybe you just forgot about it, Jeff. Like in that Arnie film "Turtle Recall"Groan. :o)Bruce Willis, Arnie and Sylvester Stallone are sat in a bar discussing their new film "The Great Composers". Bruce Willis says, "I'll play the part of Beethoven. I fancy that"
    "I think I should be cast as Mozart" says Stallone
    Arnie simply says "I'll be Bach"
    beats george about the head and shoulders with a hockey stick for bad humor ... Bad George no beer for you.
    PS.

  • Some Simple Questions about the CE

    Hi ,Experts .
    I am new to the CE .
    I read some information about the CE Architecture,
    I am wondering the difference between the CE and Net weaver studio ,CE and GP ,VC ect .
    what i really want is that using flex plug-in edition ,in the CE or NetWeaver ,as both is Eclipse based ,i think it's a reasonable way .
    Which enviroment is better ,for enterprise UI 2.0 means flex component can communicate with web dynpro without any difficulty ,while the webdynpro can communication the flex component through the way of implenent the flex component into webdynpro as normal way implementing a webdynpro component ?
    Any tips ?
    Thanks in Advance
    Eleanor

    Hi,
    >>>I am wondering the difference between the CE and Net weaver studio ,CE and GP ,VC ect .
    With the SAP NetWeaver platform, you can align IT with business requirements. SAP combines composition technologies and application functionality to reduce IT complexity and increase business flexibility. With SAP NetWeaver, you can compose applications using enterprise services, orchestrate business processes and events, manage enterprise information, and deliver applications and content to users more quickly and cost-effectively.
    SAP Netweaver includes a comprehensive set of tools.
    SAP NetWeaver Composition Environment u2013 Provides a robust environment for design, deployment and running of composite applications that comply with enterprise service-oriented architecture .
    SAP NetWeaver Developer Studio u2013 Offers a convenient user interface and rich functionality for developing J2EE applications
    >>>what i really want is that using flex plug-in edition ,in the CE or NetWeaver ,as both is Eclipse based ,i think it's a reasonable way .
    SAP NetWeaver CE includes:
    Support for different layers of a composite application (including Java EE 5 development, service layer, user interface technologies, and process layer)
    Software tools and templates at all levels to increase development efficiency and application homogeneity
    Model- and code-generation-based methods via tools that store models in a proprietary metamodel repository
    To facilitate the development of composite applications, SAP NetWeaver CE supports the following:
    Application development with Eclipse-based SAP NetWeaver Developer Studio
    User interface design with SAP NetWeaver Visual Composer, Web Dynpro, and SAP Interactive Forms by Adobe
    Process orchestrations with guided procedures
    Service composition with SAP Composite Application Framework
    Service discovery and registry with UDDI-compliant, Enterprise Services Repository
    Application deployment with Java EE 5-based SAP NetWeaver Application Server
    Solution life-cycle management with SAP NetWeaver
    The SAP NetWeaver Composition Environment (SAP NetWeaver CE) provides a robust environment for the design and implementation of composite applications. It offers the tools and the environment necessary for building and running composite applications fast and efficiently.
    I hope this will clarify you.
    Regards
    Aashish Sinha

  • Simple questions about the Live! Ultra for Notebooks webcam

    Hi there,
    I don't have a notebook, but I have an LCD display and I'm thinking of getting a webcam. Does anyone know if the Live! Ultra for Notebooks can be clipped on something as thick as 3cm?
    Also, does it have an in-built microphone, or is that all in the headset?
    Thanks in advance.
    Charlie

    Charlie,
    The clip of the webcam can be stretch to approximately about .5cm only. Also, the microphone is not inbuilt into the webcam. It's on another seperate headset.
    Jason

  • "Simple" question about Activity Monitor

    When Activity Monitor displays percentages, is that percentages relative to what else is running, or is that percentage of the CPU's processing capacity? Something that is using up 30-40% of the CPU's processing capacity is a lot more intense than something that is using 30-40% of the CPU's activity AMONGST the other threads running.
    So which is it? Percentage of the CPU's processing CAPABILITY or percentage of what the processor is chewing on right now - regardless of how much more it could chew on.
    This will help us decide if our current xserve (1G, 1CPU, G4) is adequate for our needs or we're constantly maxing out the processor and need to look for a faster server. I don't want to replace an older, but still adequate system just because newer is obviously faster.

    It's entirely possible for a process to use more than 100% of a CPU.
    In the case of a dual-CPU machine you could use up to 200% (100% x 2 CPUs).
    In the case of a quad-core machine (2 x dual-core CPUs) you could see up to 400% (100% x 4 cores).
    An 8-core server could see up to 800%
    You see, the 100% mark is based on each CPU core, not all cores combined. I guess that wasn't clear in my earlier response.

  • Upgrading my wife to 4G from a CDMA and had a simple question about the SIM.

    Hi,
    I'm planning on upgrading my wife from the Droid to the Droid 4 for Christmas. I intend to buy the new phone through ebay to save a little money and I was wondering how that would work out with the SIM card. Can I just call Verizon and ask for a 4G SIM card or do I need to do something else?

    Yep, you can call and ask them to send you one or you can pick one up at your local Corporate Verizon store

  • Re: Question about the Satellite P300-18Z

    Hello everyone,
    I have a couple of questions about the Satellite P300-18Z.
    What "video out" does this laptop have? (DVI, s-video or d-sub)
    Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
    What is the warranty on this laptop?

    Hello
    According the notebook specification Satellite P300-18Z has follow interfaces:
    DVI - No DVI port available
    HDMI - HDMI-out (HDMI out port available)
    Headphone Jack - External Headphone Jack (Stereo) available
    .link - iLink (Firewire) port available
    Line in Jack - No Line in Jack port available
    Line out Jack - No Line Out Jack available
    Microphone Jack - External Micrphone Jack
    TV-out - port available (S-Video port)
    VGA - VGA (External monitor port RGB port)
    Also you can connect it to your LCD TV using HDMI cable.
    Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

  • Question about the programming of a legend

    Hello everybody,
    I have a question about the programming of a waveform's legend. I
    already asked here in this forum about the legend programming (03)
    months ago.
    I went satisfied but I ve just noticed that this code
    (See Code old_legend_test.llb with main.vi as main function) operates a
    little different from my expectances.
    Therefore I have a new question and I want to know if it
    is possible by labview programming to plot and show, on a waveform
    chart, a signal with activ plot superior to zero (0) without to be
    obliged to plot and show a signal with activ plot equal to zero (0) or
    inferior to the desired activ plot.
    I give you an example
    of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
    and each signal corresponds respectively to a channel (Chan1, Chan2,
    Chan3, Chan4). I want to control the legend (activ plot, plot name and
    plot color) programmatically. Is it possible with labview to plot signal
    1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
    without to active the signal with the corresponding activ plot zero
    (0)?
    Let see the labview attached data
    (new_legend_test.llb with main.vi as main function). When I try to
    control the input selected values again I get them back but I don't
    understand why they have no effect on the legend of my waveform chart.
    Could somebody explain me what I m doing wrong or show me how to get a
    correct legend with desired plots? Thank by advance for your assistance.
    N.B.
    The
    both attached data are saved with labview 2009.
    Sincerly,PrinceJack
    Attachments:
    old_legend_test.llb ‏65 KB
    new_legend_test.llb ‏65 KB

    Hi
    princejack,
    Thanks for
    posting on National Instruments forum.
    The behavior
    you have is completely normal. You can control the number of row displayed in
    the legend and this rows are linked to the data you send to your graph. Thus,
    if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
    which data you want to display in your graph using the property node (Active
    plot and visible). But for the legend as you send 3 plots there is an array of
    the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
    this array but you cannot control the order in this array! So, to be able to
    change this array you have to only send data you need to you graph. I'm not
    sure my explanations are clear so I have implemented a simple example doing
    that.
    Benjamin R.
    R&D Software Development Manager
    http://www.fluigent.com/
    Attachments:
    GraphLegend.vi ‏85 KB

  • Simple question about mount and delay script

    Hello, I have a simple question about mounting volumes on start up.
    My computer wakes up auto - and then auto there are serveral applescript tasks (mount and start up programs)
    I use this script (daily) for serveral connections with external volumes I always need the connect to. ( In the script I use this code 3 times for other locations) I do this on start up.
    set Uname to "XXX"
    set Pword to "XXX"
    set someVolume to "afp://XXX.XXX.XXX.XXX/XXX/XXX
    mount volume someVolume as user name Uname with password Pword
    (same code for 2 other locations)
    When i do this on start up sometimes the script says there is no connection possible. I guess it's because on start up the connection isn't there. And 1 minute later when computer is total ready the connection is ok. When I run the script then It works. Just sometimes ( In the morning) 'It' want to connect but the script stops. When i do it manually(I run the script again) it works just fine.
    Is it possible that I need a delay? Can someone explain this?
    How would I make a delay handler for this script? Is that the best solution?
    Thanks in advance. This is something small i'm wondering about.
    Colin

    BTW, If you saved the script as an application +(and not as an application bundle)+ you could drop the script on to *Drop Script Backgrounder* (freeware).
    Then the script would run in the background, so, you wouldn't see it running in the Finder.
    <http://www.macupdate.com/info.php/id/7922/drop-script-backgrounder-x>
    Tom

  • I got an answer and I replied with a question about the answer, does no show in unanswered

    I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that?
    He said - Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox.
    I want to know - Will I still have my bookmarks, history, addons, plugins, etc.? I do not know what plugins and such that I had. What about my pinned tabs and my tabs that where open.
    More information - When I try to start Firefox I keep getting the message that I need to restart my computer in order to complete a previous update attempt. I had Sweetpacks on my PC and I do not know where it came from, it took over my home page in Internet Explorer and Ithink caused the issue with Firefox.
    Should I do the clean install or try starting Firefox now.

    Could you please stay in the thread where you posted the question and reply there instead of opening a new thread?
    Locking this thread, so please continue here:
    *[[/questions/968194]]
    See also:
    *[[/questions/968222]]
    You won't lose bookmarks and other data in the Firefox profile folder as long as you do not remove personal data in case you uninstall Firefox.
    See also:
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/kb/Backing+up+your+information
    You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.<br />
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.

  • A simple question about combo box

    Dear All,
    Just got a simple question about combo box: I have one of these selectors with labels based on filtered rows from a table.
    Is it possible to have one more label that would select all options?
    Like:
    Product A
    Product B
    Product C
    All Product
    Many thanks for your help!
    Gilles

    Hi Gilles,
    The purpose of ComboBox itself to select single option out of many.
    For your purpose, you may have to use "List Builder" which can accomodate 1 or more  to select.
    Please revert for more clarification if you need.
    With best wishes
    BaaRaa.

Maybe you are looking for