Simple question: does the Nvidia proprietary driver support OGL ES 2 ?

Just the question in the title. Does it support opengl es 2.0 (coming with Kwin 4.7)? Will it (if somebody knows) ?

OpenGL ES is just a stripped down subset of OpenGL, so I see no reason why it shouldn't be. Please correct me if I'm wrong.

Similar Messages

  • Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

    Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

    Yes, but you might want to note that the port on the AirPort Extreme is only USB 2.0, and that it runs at about half the speed of the USB 2.0 port on a computer, so things are going to be quite SLOW as far as backups are concerned, or anything else for that matter.

  • Does the FOSS radeon driver work with the 7970M (RadeonSI Pitcairn)?

    I did a search for the 7970M on the forums, but the only results were the ATI Lounge and a couple other very, very long threads (and the search didn't tell me where in the hundreds of pages the references for the 7970M were), so I figured I'd make a post and ask a direct question:
    Does the radeon kernel module (foss driver) support the 7970M?
    I've tried activating the radeon driver via vgaswitcheroo (echo DIS > /sys/kernel/debug/vgaswitcheroo/switch) but that just results in a black screen (which I can get out of by echo IGD the same thing).
    I've had some moderate success using the fglrx module, but switching is iffy at best, and I've had some very strange results with running dual monitors on fglrx with the 7970m. I'm checking out options for using Bumblebee/Ironhide modified to work with fglrx (http://forums.gentoo.org/viewtopic-t-909802.html) , but before I do that I want to give a go at trying to get the radeon kernel module to play nice with the 7970M.
    Thanks for any info!

    Cool, thanks.
    I see that PXP/Enduro (aka hybrid switching) is MOSTLY marked on the X.org chart -- does anyone have any experience getting the 7xxxM series to successfully switch with vgaswitcheroo? I'm running into a wall here -- whenever I do this
        echo DIS > /sys/kernel/debug/vgaswitcheroo/switch
    It just gives me a black screen until I switch back to IGD.
    EDIT: I guess, at this time, it's not entirely possible due to limitations in X (which I kind of assumed): https://bugs.freedesktop.org/show_bug.cgi?id=37528
    Which likely means that I'd have to do something along the lines of Bumblebee, which I believe has a radeon branch (amd-common)
    Last edited by snowblind (2013-07-18 17:08:13)

  • Does the K8N Neo-FSR support the mobile chip out of the box

    just like the titles says
    does the K8N Neo-FSR support the mobile clawhammer out of the box.?
    if not what bios would i need,. or can anyone confirm what bios is being shipped on these motheboards now.

    Jim,
    From what I've read, there are updates to the memory controller and the addition of SSE3 support to Venice.  It's also reported to have some performance improvement over Winchester and Newcastle.  It will use a default 1.4v VCore.  Hopefully, It's power comsumption is on the same order as the 90nm Winchester's or less.
    If Monarch is shipping the combo with available Bios, you can bet they work.  I'm thinking of giving them a call on mine to transfer the 2yr warranty to my youngest daughter (it's a graduation gift) and to discuss the Bios 3.3 vs. 3.3B3 issues.   They shipped mine with B3, and I think there may be a reason.  The B3 works great with a simple WPCRSET patch of the CAS to RAS Delay.  That's why you see those memory settings working on mine.
    On the "boxed" vs. OEM, I think buying the combo with warranty and a better heatsink is a much better choice.  Use the Venus 7+ in my specs.  It's low profile, all copper, and one of the highest rated.  Monarch has it in their configurator.  It's as quiet as AMD's.  Monarch also gives you a 30 day free return with a Fedex prepaid shipping label in the package.
    Danno

  • Does the K8N SLI Platinum support the AMD 64 FX-60?

    Does the K8N SLI Platinum support the new AMD 64 FX-60 cpu?
    and if not it will with a bios update?
    ...also same question goes for the FX-57 cpu
    Best Regards,
    Manolis aka Markoul

    Yes
    <K8N SLI Platinum CPU Support>

  • I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to

    I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to do that?

    kahjot wrote:
    Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
    Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

  • Does the sender SOAP adapter support multiple operations per interface

    Hi guys,
    does the sender SOAP adapter support multiple operations per interface? (interface type of 7.1)?
    Thanks,
    Andrzej

    theoretically Yes.
    Do have a look into this when you get time
    /people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype

  • Does the ipad mini 2 support USB OTG funtionality

    Does the ipad mini 2 support USB OTG funtionality ?

    if you don't mind me asking, what are you trying to use it for? so i can get a better understanding of what funtionalities you are trying to get out of this type of cord
    he is a link if you are wanting to buy it and just give it a try
    http://amzn.com/B00CR7U2X4

  • Does the Catalyst 2960x-48TD support Cisco's IGMP Snooping MIB?

    Does the Catalyst 2960x-48TD support Cisco's IGMP Snooping MIB?  We have a number of switches from different vendors and have recently begun switching to Cisco's, however unlike the other brands I am unable to audit the IGMP Snooping settings via SNMP.  It appears that while the switch supports IGMP Snooping it does not support the CISCO MIB for IGMP Snooping.  Is this a known bug and is it fixed in any of the later releases?
    Our company is purchasing and deploying C2960X-48TD's and I am tasked with updating our system audit software 

    Hi Sean,
    Nov 21 15:40:42.390: %MCAST-SPSTBY-6-ETRACK_STATS_LIMIT_EXCEEDED: Number of entries in IGMP snooping explicit-tracking statistics has exceeded the maximum limit (32000)
    The above log message is written because the number of explicit-tracking statistics entries is bounded to avoid monopolizing of system resources by IGMP/MLD snooping. The explicit-tracking statistics database maximum size is set to the same as that of explicit-tracking limit.
    The statistics are split into two banks: permanent and volatile. The statistics entries will be stored permanently (volatile) until the permanent entries threshold is reached, after which the statistics will be stored temporarily up to the database maximum size. When the size of the database exceeds the permanent threshold, a group will be removed on receiving an IGMP/MLD leave. Groups can be removed whether they were installed above or below the permanent threshold. If the number of statistics entries grows beyond the maximum size of the database, then no statistics will be stored for any newly formed groups.
    You can disable ip igmp snooping explicit-tracking by the following
    1) Configure "no ip igmp snooping explicit-tracking"
    2) Configure "ip igmp snooping limit track 0" on global.
    3) After ET is disabled, please do a "clear ip igmp snooping statistics".
    Here is a reference URL (please make sure you copy and paste the entire link to the browser):
    http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/snooigmp.html#wp1062242
    HTH
    Luke

  • I would like to convert a 100 pages PDF document to xls. Does the Adobe ExportPDF tool support this?

    Does the Adobe ExportPDF toll support the conversion of 100 pages?

    Your file should convert.  Please see our FAQ for more info about ExportPDF's limitations: http://forums.adobe.com/docs/DOC-1515

  • How do I install the nvidia 173 driver?

    Hi
    Today I installed Arch. Felt like the greatest achievement. Got xorg, and a few other things working, lxde until I download kde... and how to I install the nvidia 173 driver from the aur for my nvidia geforce fx 5700 (leastwise winfast a360) on arch?
    many thanks.
    PS sorry if this is scruffy, I'm on my  phone which is small

    Welsh_Miner48 wrote:https://aur.archlinux.org/packages/nvidia-173xx/ is it I think
    Sure it is.
    Did you read https://wiki.archlinux.org/index.php/Nvidia ? It's mentioned at the very beginning.

  • With hardware acceleration enabled, and with plenty of tabs open, using the Windows 7 taskbar preview option will almost always crashed the nVidia display driver.

    Latest Firefox 4 beta 6.
    nVidia GT240 1GB DDR3 with driver version 258.96.
    Windows 7 Ultimate.
    If I have plenty of tabs opened, in Firefox 4 beta 6 with hardware acceleration enabled, using the Windows 7 Taskbar preview feature (that will show all the tabs Firefox has loaded) will cause the Nvidia display driver to crash. When this happen, the GUI part of Firefox will be unusable and has to be killed via Task Manager.
    This doesn't happen if hardware acceleration is disabled.

    It is beta software and the older 4.0 b6 version may not work with all display drivers.
    You can trey the test extension: http://jagriffin.wordpress.com/2010/08/30/introducting-grafx-bot/

  • Does the new mac pro support the Apple cinema display

    Does the new mac pro support the Apple cinema display

    There is no 2007 23" Cinema Display
    There is a 2002 23" display that has the Apple ADC connector
    http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg
    There is also the 2004 23" display with a DVI connector.
    For the latter you just need a mini display port to DVI connector that plugs into the Thunderbolt port
    For the former you need that connector plu an DVI to ADC connector
    http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=sr_sp-atf_ title_1_1/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-1&keywords=dvi+to+adc+ display+adapter
    http://www.amazon.com/Dr-Bott-DVIator-US-110V/dp/B000NSGIQO/ref=sr_sp-btf_title_ 1_6/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-6&keywords=dvi+to+adc+displa y+adapter
    http://www.amazon.com/Dvi-Adc-Conversion-Box-instock/dp/B0002CZJ7A/ref=sr_sp-atf _title_1_4/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-4&keywords=dvi+to+adc +display+adapter

  • Does the Model Interface Toolkit support the new Linux based cRIO-9068?

    Hello, I have a cRIO-9068 and am needing to integrate a Simulink model into my controller. Does the Model Interface Toolkit support the new Linux based cRIO-9068? For that matter, does Veristand? This page implies that it does not:
    http://digital.ni.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751
    Thanks,
    Solved!
    Go to Solution.

    Hi Southern_Cross,
    Based on the readme:
    http://digital.ni.com/public.nsf/allkb/D3F40C101B66128186257D020049D679
    It looks like it is now supported! These resources should provide some additional details:
    http://zone.ni.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/
    http://digital.ni.com/public.nsf/allkb/E552B0CD4E48215586257DF7005BE055
    Please note that NI VeriStand 2014 does not currently support he NI Linux Real-Time targets. 
    Regards,
    Joel I.
    Applications Engineer
    National Instruments

  • Does the HTC One M8 support 3G

    Does the HTC One M8 support 3G in areas where 4G is not available or do you just not get data services?

    Supported Data Technologies
    1xEVDO
    1xRTT
    EDGE
    HSPA
    XLTE Band 13 / 4 (700/1700 MHz)
    So, in other words, yes, you can get 3g service on the htc one m8

Maybe you are looking for

  • Exchange email account disappears on treo pro

    activesync works great on my treo pro with my corporate outlook exchange email account. but over the past two weeks, the exchange account has simply disappeared three or four times from my phone. (it is the only active account i have. i also have a y

  • Transfer music from 3gs to 4s?

    Hi, I have backed up my 3gs and used the restore back function to copy this to my 4s. Contacts and texts have copied across, but not my music or apps?

  • ERROR  ar 196  VAT registration number contains invalid characters

    HI GURUS! I have a problem when i am trying to create a new vendor. The case is that i dont have the correct registration vat number and this vendor is from the uk. I have a number to use but it is not the correct one. The thing that i want to do is

  • Billing and the Account document Number should be same

    Hi I have a requirement for the customisation to have the same number for both the Billing Document and the Accounting Document How can we do this ? Regards Raju

  • Call Log appears in Emails

    New to the support forums but cannot figure this out. My curve has started listing the call log in with my emails. I have tried to adkust the settings to sort it but cannot figure what's wrong. Any ideas?