Simple question for bas

or anyone else that may know the answer.
should my bios see the sata drives with the sata controller enabled even before i do the f6 when installing the via raid drivers in the os.
also what jumpers should be shorted on the back the hard drives. i have 2 raptors that im trying to get in raid 0
anyone ?

I have 2 raptors...
Actually i have 4 - 2 on VIA + 2 on Promise..
Erm if your on about you Mobo BIOS.. then no - it wont see them unless you create an array in the VIA or Promise (depending on which you have connected them too) BIOS's - The Raptors come already with the jumpers connected in the correct place for SATA so you wont need to change them.
Just create an Array in the corrosponding BIOS and then that array should show in the mobo BIOS as a bootable device. Then select CD rom bootable in BIOS - chuck the CD in the cd drive - do windows setup - Press f6 when it says "install SCSI or Raid device" then put in the correct Raid adapter driver that you have connected to your HDs too.. then proceed and format your HDs etc and install as norm..
Goodluck
Cheers
Jon

Similar Messages

Questions for BAS

Questions for BAS
New to this forum, but I am running three Athlon 64 Boards here. The Abit MAX3 the MSI NEO on the KT800 chipsets. Also running a Gigabyte Nforce 3 K8NPro.
You have stated in many posts that the CPU decides what memory it uses, well I have to raise a few points. I have two sticks of Kingston Hyper X with Winbond BH5 work in both the MSI and the Abit, Two sticks of Kingston Hyper X Winbond CH5 will only work in the Abit, not in the MSI, all sticks also work on the Gigabyte. That disproves your theory somewhat. Also Abits bios update has listed as improved memory compatibility, if that is the case, then it is obvious that they cannot change your processor so they must be changing board paameters, relating to timing or voltages. This is a confusing issue.
Regarding the PCI Lock, and that the FSB does not control the hypertransport or PCI clock, why would VIA be busy implementing this in the K8T880 if it had no effect, and why does the hard drive get corruption above 230 fsb if the clock is not changing, it does not happen on the Nforce150 chipset. Also Cool and Quiet works by manipulating the multiplier to change the processor frequency, this is a multiplication of the FSB, and CPU Z also is able to read correctly the FSB.I am not saying that what you say is incorrect, but I am trying to evaluate the situation here.
Some explanation would be welcome as I have not read this explanation anywhere else on the web, and no major hardware review site states this either. Lost Circuits has a pretty thorough review of the chipset and states issues with the PCI clock and hypertransport clock changing. If you use the Nvidia system Utility on the NForce 3 board it also reports the Hypertransport clock, and that is a direct association with the fsb and multiplier. Comments welcome. Also any idea when the voltage issue will be fixed regarding the Vcore, I know of a Beta bios but is it likely to be released soon. Strange thing is the Gigabyte board does almost the same thing, but will og to 1.55 just like the MSI will using windows to overclock.

Hi,
As for the memory controller, see this document:
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23932.pdf
As for the via chipset:
http://www.via.com.tw/en/k8-series/k8t800.jsp
Anyway, it's actually funny, as everyone has a different story....
And nobody tells exactly how it's done, not even AMD....
I just gave my best idea of how it works, as nobody seems to know exactly (or doesn't want to say) it's all guessing....
As Anantech has another idea as well:
http://www.anandtech.com/cpu/showdoc.html?i=1856&p=3
He say it's taking it from the HT bus.....and the FSB doesn't exists....
But my MSI manual states that it has an LDT transmitter clock, that controls HT and can only be set Auto, 200, 400, 600 or 800MHz...
So if anyone has a better idea of how it exactly works, please enlighten us all.....
One thing i'm 100% sure of, the memory is controlled by the CPU, not the board

Can anyone answer a very simple question for me ive heard the apple was giving a free iphone 4 or 4s bumper away is there any truth to that?

can anyone answer a very simple question for me ive heard the apple was giving away iphone 4 or 4s bumpers is there any truth to that?

Not any more, no. There was a free bumper program back when the iPhone 4 originally came out. It has long since expired.

Pro Tools convert to Logic Newbie some simple question for logic users

Hey guys, I am a recent convert from Pro Tools! and There were just some simple questions I thought some of you may be able to help me out with. I am using Logic 9.1.1
1) After I set up a multi timbral software instrument (in this case MOTU Symphonic Library) how do I set up midi channels to trigger the individual sounds in the instrument. (in pro tools I used to create a midi track then send an output of that track to that particular soft synth)
2) How do I set up a and forgive my Pro Tools vocab but basically I want to set up a reverb channel on an aux track have it receive on a bus so I can send other tracks to that particular bus.
Thanks for the insight and really looking forward to finally make use of all this ram! lol

1) I have a nord stage and would like record via midi. In pro tools i would usually need to create a midi track with the output set the the nord and an audo aux track to hear it What would I do in order to record midi from my nord stage?
To record, just select a non-audio track, hit record and play the keyboard. The notes will get recorded into a region.
If you want to play it back to the Nord Stage as well, then it makes sense to set the Nord up as a MIDI device in your templates, so you can just add the Nord to a track and not worry about what MIDI ports it's on etc. Open the environment, create a New -> Instrument, called it "Nord Stage", set the MIDI port and MIDI channels it's on, and sav your template.
Now, when you start a song, to sequence the Nord, you just assign the Nord instrument to a track (by for instance, right clicking on a track and choosing your Nord instrument from the list of environment obects that appears).
2) The multi instrument trick is quick and easy its great but How would I do that manually?
Lots of ways, look into your key commands, ther are all kinds of "Create track with same instrument", "Create track with next MIDI channel" and so on. There are too many ways to do this to quickly talk about here. In short, all tracks have an environment object assigned to them, whether it's an audio object, or a MIDI instrument object, and this determines where the data on the track goes.
3) How do you set up midi so that it doen'ts overwrite notes when recording over them?
Not sure I understand you here...

SOME SIMPLE QUESTIONS FOR ALL OF YOU

hi,
I have some questions for all of you.
1. Oracle uses cgi (even asp!!! I've seen an asp page somewhere on an Oracle's site but this moment I don't remember where perhaps it is asp->cgi). Why ?
Oracle doesn't support their techologies
(Pl/SQL, Jsevlets,XML) ?
2. Oracle says that has just released a
new product for mobiles called "Portal2Go".
I tried to install this product on NT with OAS 4.8.1.
I had many problems during the installation and after many tries finally I did it(thanks God). but the problems continue...
many Jsp errors (from the "tested" supplied apps). My question is:
a. This product is in an early stage (many installation errors.. just a baby) and I think is stable for Sun Solaris but not on NT.
b. You Oracle "experts" (i.e. oracle staff, NOT YOU guys) tell me ONE advantage to use you product (I'm an oracle developer for 6 years now):
You say that I can PORT my existing app in any device and Web (through XML). This is a joke. Mobiles,PalmPCs,Web etc. have different requirements (content,display etc).The scope is different.. so this is absolutely FALSE (to use a boolean).
This release is user unfrienlty. Why.. tell me WHY to pay for a product and for extra hardware (read the product technical reqs!!) to do the SAME THINK
I do NOW with existing sources.
I've developed an app for my company's employees using existing version of DB (8.0.5),pure pl/sql and a WAP GATEWAY.NOTHING LESS NOTHING MORE.
please answer. Any comment welcomed...
maybe I'm wrong maybe I'm not.
PS.WHERE THE WAP GATEWAY/SERVER IS. I searced the cd and..nothing :-) ?
thanks
thanasis j.a.
B.A. in Informatics
M.Sc. in IS

Portal-to-Go is a wireless portal server, the first version was released November 1999.
The problems you describe that mobiles, Palm devices, etc all have different characteristics is one of the key reasons for Portal-to-Go. It allows any service to be displayed on any device by generating content in an appropriate format for specific devices. This way you can take into consideration the size of the screen, the display characteristics, etc.
It is 'stable' on Solaris and NT, though it is true that the installation procedure of the CD is for Solaris only. The product is not currently available on OTN, so the installer restrictions should have been explained to you when you obtained the CD.
Why Portal-to-Go? Here's three reasons:
1. Inherent problems of the User Interface for a wireless device, so we provide a way personalise the UI to improve navigation and allow commonly used parameters to be saved as stored preferences through the portal.
2. Differences in the characteristics between wireless devices make it hard to support all type without re-creating content and applications for each specific case. With Portal-to-Go, the same service can be accessed from any device.
3. Lack of content available for WAP and other wireless devices. We have tools to quickly create wireless services from existing Web sites as well as an application platform for creating new Java or database applications for wireless devices.
You are correct that the product does not have a WAP gateway.
I'm not sure where you are located, but feel free to contact me offline. I can answer any specific questions, or get you contact with a local Oracle representative.
At the moment, if anyone wants to obtain a copy of Portal-to-Go, you should contact your local Oracle representatives.
Paul

Simple Question for R/3

Hi, Alls
Question1, what roles and authroz. I need for CCMS alerts in R3 system and auto-reaction method seutp
Question2, Will I have to configure SMTP first for CCMS (Auto-re-action method)
Question3, Sould I need to change any profile for that ?
Please give me simple answer not any URL thanks
Thanks in Advanced

Read,
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
regards
Juan

Simple question for some--not me :(

When would be better to use a switch statement and when it would be better to use an if statement.
Can anyone point me to a program or some sites with both working?

However, Switch statements can only be used with primitives and not objects.Do note that this has changed in recent Java versions. Here is the current statement from the Java Tutorial:
"Unlike if-then and if-then-else, the switch statement allows for any number of possible execution paths. A switch works with the byte, short, char, and int primitive data types. It also works with enumerated types (discussed in Classes and Inheritance) and a few special classes that "wrap" certain primitive types: Character, Byte, Short, and Integer (discussed in Simple Data Objects ). "

Probably a simple question for ya...

Ok, so I will start this by admitting I know almost nothing about AS3 and very VERY little about programming as a whole.
I'll post my code below and you'll probably think I'm an idiot for not knowing what's wrong with it, but that's ok, lol. I keep getting "1120: Access of undefined property..." with a whole bunch of different problems, all involving the movement of a character that I'm trying to create for a game I'm attempting to make. If you can please tell me what I'm doing wrong and if possibly explain it as if I know nothing about programming, it would be very much appriciated. I've been working on this for a while now and am not getting anywhere, and I just know the answer is something very simple I'm missing. Once again thank you very much in advance for an answer,
package
          import flash.display.MovieClip;
                    public class Shooter extends flash.display.MovieClip
                              public var WalkingSpeed;
                              public function onLoad()
                                        WalkingSpeed = 5;
                              public function onEnterFrame ()
                              if(Key.isDown(68))
                                                  _x = _x + WalkingSpeed;
                              if (Key.isDown(65))
                                                  _x = _x - WalkingSpeed;
                              if(Key.isDown(87))
                                                  _y = _y - WalkingSpeed;
                              if(Key.isDown(83))
                                                  _y = _y + WalkingSpeed;
Also a quick note is it worked great in AS2 with a few differences but I was told to use AS3 and when I changed it over and rewrote a few things it no longer works, thank you once again.

Whenever you get errors, you help others to help you by including the complete error messages in your posting. I cannot say for sure that the following line is a problem, but you can try changing it to see if an error goes away...
public class Shooter extends flash.display.MovieClip
change to
public class Shooter extends MovieClip
Then you will need to make some changes to update the code to be relevant to AS3. The Key class does not exist in AS3, so all of your Key.isDown() code won't work.
Also, _x and _y are x and y in AS3
You're best bet will probably be to search Google using terms like "AS3 Keyboard move tutorial" to get the info you need to do what you want in AS3

Question for Bas

sorry if this is posted in the wrong section but I don't know of any other forums that Bas moderates, I downloaded the bios file for kt3 ultra (I'm using winxp) and I can't get into dos and Bas says to make a dos floppy but I don't have a floppy drive, is there some sort of command that I could do to make windows go into dos (I've tried safe mode w/command prompt and the like but nothing) or what about using live update? thanks.

hi
try making it a bootable cdlink

Very simple question for a newb

I'm working with the 3d camera but somehow when I'm moving in my 3d space, the camera place moves. I'm not sure what im doing wrong to move the camera. Anyway, how can I move my camera and keyframes together from the "Top" view?
I've done it before, just dont know how.

You actually answered your own question. Switch to Top view and sure you have record animation turned off . If you can's see the camera and the objects in the view, make sure nothing is selected and press F to fit all scene items into the viewport. If you have the proper overlays turned on, when you select the camera you will see it, and it's motion path. You can now use the adjust tool to click and drag the camera. The keyframes will follow.

Simple questions for Oracle XML Team - please respond

1) Which class/methods should be used to obtain the content
model (mixed-content or element-content) associated with each
element declaration in a DTD? In other words, how do I know if a
particular element can have child elements and/or data in a
valid XML document, the frequency each child element can appear
under a particular element, and whether a sequence list or a
choice list was used to declare the element?
2) Do you have any bug reported so far for this part of Oracle's
parser made available in the last released?
Thanks,
Renilton
null

Renilton Oliveira (guest) wrote:
: 1) Which class/methods should be used to obtain the content
: model (mixed-content or element-content) associated with each
: element declaration in a DTD? In other words, how do I know if
a
: particular element can have child elements and/or data in a
: valid XML document, the frequency each child element can
appear
: under a particular element, and whether a sequence list or a
: choice list was used to declare the element?
Look at oracle.xml.parser.v2.ElementDecl class and then
getContentType and getContentElements methods.
: 2) Do you have any bug reported so far for this part of
Oracle's
: parser made available in the last released?
: Thanks,
: Renilton
Each release contains a list of bugs fixed. Is there a
particular bug you are interested in?
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

COWBHUWE : simple question for experts

How can I have HU in HU proposal for an order ?
What are the previous step ?
I tried to create HU for my material but they don't appeared in the list.
Regards.
Christophe

Hi Christophe,
1.You have to Created Packing Instruction for a material in POP1 transaction
2.The in the Material master Basic data you have to assign the Packing Material group for both the header material and the packing material. Both to be in same packing material group.
3.The use tcode COWBPACK for creating the packing with Handling units
4.Then use tocode COWBHUWE to make the receipt.
Thanks and regards
Murugesan

Palm Pixi simple question for the pros

How do I block my wireless number from being displayed on an outgoing call, or can it be done?
Post relates to: Pixi p120eww (Sprint)

Hello!
If im interpreting this correctly, you want your number to not be displayed on people's caller ID. In those cases, 2 ways to do this.
1. Use *67 to block calls. On your phone, dial *67, then whatever phone # you want and dial. Would need to do this for every call you want you number blocked.
2. Contact the carrier to put a block on your #. Afterwards if you want your # visible, just dial *87 then the phone #.

Simple question for a kt4av

V.Simple this one, will a Cooler master 7 fit OK on this board ??

Coolermaster Aero 7 lite
Coolermaster Aero 7 +
Coolermaster Jet 7
They will fit.
I bought the Aero 7+ and I am very disappointed with it. I noticed that my temps were a bit high so I swapped it with my old Xdream heatsink and the temps were lower.
Looking at some reviews and it turns out the aero 7 lite is better.
http://www.cooltechzone.com/reviews/cooling/coolermaster_aero_7_lite_7.html
http://www.bjorn3d.com/read.php?cID=315&pageID=435

New to SAP - simple question for yall

Yall
I have been doing BI for over a decade and started to learn a bit about BW with a friend of mine that works with BW as a consultant.
Now the issues I care to find out are many, but to summarize:
1) Can a person without project experice gets certified in BW?
2) Would anyone hire that person without a project experience though?
I see a lot in common with my BI experience and BW but since I have never worked on the envinoment before I am wondering if this is even a sound strategy.
Bests
AR

Hi Andrew,
you can go for certification of BW, its really cool to have certified people in market. I am definetly sure it will give you value addition in your better job search and give you an impression that you certified.
Lots of European and UK and USA based companies now looking for only certified consultants...
go ahead............for certification.
- Aby

Simple question for bas

Similar Messages

Maybe you are looking for