Simple question, help needed? Finder icons

In finder have lost the music folder on the left sidbar(the one beside 'pictures' and 'movies' etc..) how do i get this folder back with the nice default music icon?

Ribbs,
I should have paid more attention your original question.
Sorry for pointing out the obvious.
Removal and replacement of the Music Folder from the Sidebar on my system always results in the Treble Cleff icon representing the Music Folder. Seems like there might be some kind of cache or plist corruption problem with your system.
I would advise that you read, Maintaining Mac OS X and Running the Mac OS X maintenance scripts by Dr. Smoke for some troubleshooting tips.
;~)

Similar Messages

P35 Platinum simple question help needed!

Helo......
Take a look into this picture:
http://www.subir-imagenes.com/imagenes/de5066b3c6.jpg
mirror: http://img514.imageshack.us/my.php?image=p35platinumep8.jpg
screws holes: http://www.hardwaresecrets.com/fullimage.php?image=7420
I have seen this 2 holes placed at copper passive cooler system, just besides the memory, and at a height allowing to put a 80mm fan (I guess but not tried) just almost "touching" memory modules....
For me, it would be great since my Q6600 CPU use to be at nearly 50º with zalman 9700, and motherboard gives 45º usually...... memory is very hot... 4 modules of 2.0v kingstom hyperx 4-4-4-12 for 4Gbs........
Someone tried to put there a fan????????
Are these holes specially there to do that way??????
If you put a fan there, you would do it extracting air from memory modules, or just pushing air to them?????
Thanks!

Quote from: Maesus on 26-September-07, 04:18:31
2 screw holes? got picture?
isn't those 2 screw holes to mount the extended heatsink beside the DIMM?
mmm.......
I refer to this "supposed to be" screw holes, as they seems it to me at least...
http://img170.imageshack.us/my.php?image=screwholesef4.jpg
You talk about a "extended heatsink beside DIMM"..... I cannot find any documentation about an extended heatsink anywhere (maybe a bit blind, so, if you were so kind, can you please tell me something about it or maybe give a simple link for it?? I wish to refrigerate better my memory modules and chipset with my zalman 9700, and this holes just over there without any purpose (for me) are getting me crazy...
Also I tried to give airflow to the memory modules through an 80mm fan situated on the thermaltake shark chasis (Mc Giver wouldn´t do it better) and the result is Zalman 9700 is taking all the air from the fresh airflow of the new fan besides, resulting in cooler CPU, but hotter memory and chipset.... pfffffffffffffffff............

About Java 2 opaque font color question, help needed!

About Java 2 opaque font color question, help needed!
I was trying to test opaque font (the string has a foreground color and a background color), but i can't find the method for doing that.
i can change foreground by Graphics2D.setPaint(Color.black).
Anybody know how to change the background of the string?
Thanks!

Hi. The way I'd do it would be to use the font metrics to find the length of a string and draw a rectangle and then drawstring over the rectangle. If you want an example, I can post it although I suspect theres a better way.

Adobe Lightroom 4 - Some Questions / Help Needed

Hi everyone.
After advice from several experts, I've just purchased Adobe Lightroom 4. I've already got Photoshop CS5, but I was looking for something proper to organise my photos, plus I found Lightroom easier to do the sort of editing I am wanting to do. Now, I only really use photoshop for things like colour pops, or really in-depth editing. Anyway, I'm loving Lightroom so far, but there is some stuff I'm not very sure of, so I'd appreciate some help
1. Organising
Firstly, I'm not really sure how to organise. At the moment, I've just got lots of folders with random events in My Pictures on W7, so I might have a folder called April 11, which contains photos from that month but that might have been a wedding or an easter holiday or both. So it doesn't really work. \
I understand in Lightroom what catalogs are. But I know enough to know that I don't want to group mine into those, its getting too complicated. What I don't know though is the difference between a collection and a folder. Basically, I'm wanting to reimport and reorganise all my photos, so I want to put them into "events" as such like you can do on iPhoto on a mac, so I would have "France Summer Holiday 11" for example, or "Mia's Wedding". I'm not really sure on the best way to do this ...?
2. Editing
I've played around quite a bit so far, and I really like what I've seen. On a lot of photos, I've made a lot of changes. But from what I can see, these changes are stored merely in Lightroom itself. For example, at the moment I'm importing photos from my external disk into Lightroom, which then saves them in C://My Pictures/Lightroom/Pictures . When I go look at these photos in windows explorer which I know I have edited, it doesn't show any of the changes or editing I've done on them. Now I realise this is me being stupid, but why doesn't it? Supposing I then want to email that photo to a friend that I have edited? How would I do that? I don't want to have to open lightroom and export every single photo I edit? There must be a simpler way?
Likewise for backing up, because all my files are in subfolders within C:// My pictures / Lightroom / Pictures, to back up I was simply going to set up windows to copy that latter folder onto my external HDD everytime I plugged it in. This would be pointless however if it isn't physically overwriting the original photo with my edited version?
3. Editing 2
Something else I like to do is make lots of different edits to the same photo. For example, at the moment I'm editing a photo of a pier at night. I spent ages adjusting colours and lighting and so on, and now it looks great. But I would also like to save a copy of that photo with the "old age photo" effect preset on. Is this possible? and how do I do it? Other than obviously importing a duplicate?
4. & 5. & 6 - Misc:
4. Simple question - how do I add tags, keywords or comments if I haven't done it on import?
5. My camera doesn't have built in GPS. Is it possible for me to manually geotag photos (in a batch, say for a Summer Holiday to NY), could I manually add a geotag for all these photos?
6. I also forgot to add copyright information on import for some, is it possible to do this after import and how?
7. I normally shoot in JPEG. I probably shoot shoot in RAW as everyone tells me to do so. Are there any significant advantages in terms of quality, and for editing with?
Thanks for any help given. I appreciate this is a lot of questions, but I could really use the advice.

Hi William,
1. Organising
Firstly, I'm not really sure how to organise. At the moment, I've just got lots of folders with random events in My Pictures on W7, so I might have a folder called April 11, which contains photos from that month but that might have been a wedding or an easter holiday or both. So it doesn't really work. \
I understand in Lightroom what catalogs are. But I know enough to know that I don't want to group mine into those, its getting too complicated. What I don't know though is the difference between a collection and a folder. Basically, I'm wanting to reimport and reorganise all my photos, so I want to put them into "events" as such like you can do on iPhoto on a mac, so I would have "France Summer Holiday 11" for example, or "Mia's Wedding". I'm not really sure on the best way to do this ...?
I am not so sure if you understand *catalogs*.
You need a catalog, exactly 1 in my opinion. A catalog is a database. The Lightroom database, where records about your images are stored, including the pointers to your images, which are not inside a catalog! LR backups just does the backup of the catalog (i.e. a file ending .lrcat). You need to take care separately that your real images are backed up !
Inside your LR database the best way to organize is via collections - this will give you what you want with "France summer holiday 11" etc.
Folders are relatively unimportant, just storage buckets. They should be *handy portions*, I would prefer them with below 3000 images each, as there currently some bugs to those bigger ones.
Before you start with LR, you can organize your pictures in Mac Finder / WindowsExplorer.
Or you could do it with the help of LR, by copying your images over during import into the destination folders (and deleting today's folders afterwards after having verified that everything is fine).
A simple date-based structure will do, I'd recommend a root parent folder like "LR images", underneath one folder per year (\2010\, \2011\, \2012\...) and underneath them either
just one folder per month (LR can auto-create them for you)
or you create the folders in import dialog as e.g. "YYYY-MM-DD description of shoot", to have a mini-diary overview also in your OS.
Apart from that you create collections, either *dumb ones*, where you drag images into, or smart ones, where you specify criteria according to which they get auto-filled.
2. Editing
I've played around quite a bit so far, and I really like what I've seen. On a lot of photos, I've made a lot of changes. But from what I can see, these changes are stored merely in Lightroom itself. For example, at the moment I'm importing photos from my external disk into Lightroom, which then saves them in C://My Pictures/Lightroom/Pictures . When I go look at these photos in windows explorer which I know I have edited, it doesn't show any of the changes or editing I've done on them. Now I realise this is me being stupid, but why doesn't it? Supposing I then want to email that photo to a friend that I have edited? How would I do that? I don't want to have to open lightroom and export every single photo I edit? There must be a simpler way?
Likewise for backing up, because all my files are in subfolders within C:// My pictures / Lightroom / Pictures, to back up I was simply going to set up windows to copy that latter folder onto my external HDD everytime I plugged it in. This would be pointless however if it isn't physically overwriting the original photo with my edited version?
LR will never overwrite your original photos.
You can save most of the catalog content into the xmp-part of the original photo, which is either a sidecar-file (.xmp) or part of the file format, like for DNG, TIFF, PSD, JPG. To do so you select the image in LR and hit <ctrl> s. Or you set it up for continuous update, which creates a lot of operations while you play back and forth in develop.
I do that on my own, typically twice per file: once I am done with develop, once I am done with keywording and other metadata update.
LR contains records about your images, i.e. a set of instructions how they are to be interpreted. That is all.
So of course you need LR to export the result of these instructions, which is actually pretty quick.
To backup your images you need to do that just once, plus you backup your LR catalog. Or if you save xmp to the files, you can do another backup once xmp is ready.
I would not consider this pointless. You just have to think that there are 2 places with data for your images: the images themselves and a database with interpretation instructions.
3. Editing 2
Something else I like to do is make lots of different edits to the same photo. For example, at the moment I'm editing a photo of a pier at night. I spent ages adjusting colours and lighting and so on, and now it looks great. But I would also like to save a copy of that photo with the "old age photo" effect preset on. Is this possible? and how do I do it? Other than obviously importing a duplicate?
Yes, this is one of LR's beauties: you create a so-called *virtual copy*, which is just a 2nd record for the same original image file with different interpretation settings, like black-and-white, a different crop size, different development etc. You can have as many virtual copies as you like, and you'll see them as additional thumbnails.
Virtual copies are not saveable into xmp, though. There is another concept which is saveable into xmp: snapshots. but these are different states in develop history, and you do not see outside develop module that you have several.
If you export virtual copies e.g. to jpg one file per virutal copy will be created.
4. & 5. & 6 - Misc:
4. Simple question - how do I add tags, keywords or comments if I haven't done it on import?
5. My camera doesn't have built in GPS. Is it possible for me to manually geotag photos (in a batch, say for a Summer Holiday to NY), could I manually add a geotag for all these photos?
6. I also forgot to add copyright information on import for some, is it possible to do this after import and how?
7. I normally shoot in JPEG. I probably shoot shoot in RAW as everyone tells me to do so. Are there any significant advantages in terms of quality, and for editing with?
Thanks for any help given. I appreciate this is a lot of questions, but I could really use the advice.
ad 4: you use the library module, metadata panel to enter.
ad 5: you use the map module. Either you manually drop your images on a map, or you have a separate GPS track to load and have LR assign via matching time-stamps.
ad 6: like 4
ad 7: You don't need JPG from your camera, you can achieve better results viy LR from RAW. Yes, there are significant advantages as to editing headroom.
Overall, may I suggest my favorite learning material for LR? First watch Julieanne's Tutorial Videos.
Then go play and use Victoria Bampton's eBook or paper copy of her "Missing FAQs to LR4": http://www.lightroomqueen.com/books/adobe-lightroom-4-missing-faq/
Have fun,
Cornelia

Simple question - How to find date

Hi Experts,
I have a simple question on date. Suppose today is Jan 4, 2010. I have to find out Jan 1, 2007 using Java code.
I have used following code. This code will work for 2010 and 2011 properly. However it won't work properly after Feb 28, 2012. Please see "dayInMillis*1096 " portion of code. Here 365365366 = 1096.
How I can avoid this hard coding. Do we have any simple way to get Jan 1, 2007 even without using following code.
     Calendar calendar = Calendar.getInstance();
     int lastDate = calendar.getActualMaximum(Calendar.DATE);
     int firstDate = calendar.getActualMinimum(Calendar.DATE);
     int todayDate = calendar.get(Calendar.DATE);
     int dayofyear = calendar.get(Calendar.DAY_OF_YEAR);
     java.sql.Date currentdate = new java.sql.Date(System.currentTimeMillis());
     long dayInMillis = 1000 * 60 * 60 *24; //1 day
     wdContext.currentContextElement().setFromDate(new Date(System.currentTimeMillis() - dayInMillis*1096 - ((dayofyear-1)*dayInMillis)));
Please help.
Regards,
Gary

Hi Gary,
I am not pretty much clear with your question, whatever i have understood, i have found a way to get the previous date given the current date.
Below is the code for the same.
                       Calendar now = Calendar.getInstance();//Jan 4, 2010
       String nowDateStr = DateFormat.getDateInstance().format(now.getTime());
       System.out.println("date now : " +nowDateStr);
       now.add(Calendar.YEAR, -3);//2007
       now.add(Calendar.DATE, -3);//1st
       now.add(Calendar.MONTH, 0);//No change in month, Jan.
       String changedDateStr = DateFormat.getDateInstance().format(now.getTime());
       System.out.println("date changed : " +changedDateStr);

A few simple questions i need help on please

i have an ipod mini. my computer crashed and i have a new computer. is there a way to upload my songs and lists to the computer? i have itunes 7.0.
second question. is there a way to upload only one or two songs to an ipod mini that is already loaded with songs, without uploading all the songs again. is the current info automatically overwritten so that i would end up with only the two songs on the ipod after uploading?
thanks in advance.
bob

is there a way to upload my songs and lists to the computer?
Maybe. You say your old computer crashed. Does that mean it doesn't run at all? Does it mean it hangs during the boot-up process? Does it mean the hard drive came to a crashing screeching halt? Without knowing more about the death of the old computer none of us can know whether the data is recoverable or not.
OTOH, you have at least part of your music data on your iPod. So with the help of third party software (check out your favorite download site) you'll be able to transfer your iPod's music and playlists to the new computer. If the iPod contains your entire music collection you are pretty much good to go.
Can you add only a couple songs to your iPod? Sure, after connecting it to your new computer you'll be told it is synced to another computer and asked if you want to sync it to this new one. Select cancel - no you don't want to sync it to the new one. After the iPod appears in iTunes select it and in the iPod preferences select manually manage. This will let you manually add or delete songs.

Simple Array Question - Help Needed!

Hey people,
I need a line of code that gets the maximum value out of an array.
the array is called LEVELS and contains values [1, 3, 4, 17, 3, 2, 4]. I need a line of code that creates a new variable called MAXLEVEL and finds the largest value within the array.
Thanks,
sean :)

Create a variable. Initialize it to the lowest possible value, like say Integer.MIN_VALUE.
Loop through your array.
For each element, see if it's greater than the current value in the variable. If it is, use it.
When you reach the end of the array, the variable now holds the max value.
How did you think you were going to do it?

Stupid Java Question (Help Needed!!!)

I have a piece of Java Code that dynamically builds a SQL statement (including VARCHAR2 columns). Oracle gives an error if my string has a single quote in it. I need to replace each single quote with two single quotes in Java, i.e. I need a Java equivalent of PL/SQL REPLACE function.
Java str.replace only replaces an individual character (see below).
String l_str = "O'Hara";
String l_str2 = l_str.replace('\'', '\'');
I need to replace "O'Hara" with "O''Hara". Any help is appreciated

Please don't post same question on both forums.
Please find the answer at:
Re: ORA-09004

Beginner Question - Help Needed for EJB QL Sample Application

I'm working with a group of student interns, like myself, and we've been given an assignment to work with Oracle. All of us have no training or experience with this, so we're just learning as we go.
I've been trying to run the EJB QL Sample Application (http://www.oracle.com/technology/sample_code/tech/java/ejb_corba/ejbql/Install.html), but I keep running into problems at step 3.
Now, we will deploy the sample application onto OC4J. Open another command prompt and go to the folder <OC4J_HOME>/j2ee/home and run the following commands one-by-one
> java -jar admin.jar ormi://<machine_name>:<admin_port> admin <admin_pwd> -deploy -file <SAMPLE_HOME>/build/ejbql.ear -deploymentName Ejbql
> java -jar admin.jar ormi://<machine_name>:<admin_port> admin <admin_pwd> -bindWebApp Ejbql ejbql-war http-web-site /ejbql
where,
<machine_name>      Name of the machine where OC4J Server is running
<admin_port>      Admin Port on which the OC4J server listens. This value by default is 23791 unless explicitly changed by the user
<admin_pwd>      Adminstrator password to access OC4J. The default value is welcome
When I do this step I get this error:
Error: Unable to find java:comp/ServerAdministrator: Lookup error: javax.naming.
AuthenticationException: Invalid username/password for default (sds); nested exc
eption is:
javax.naming.AuthenticationException: Invalid username/password for defa
ult (sds)
com.evermind.client.orion.AdminCommandException: Unable to find java:comp/Server
Administrator: Lookup error: javax.naming.AuthenticationException: Invalid usern
ame/password for default (sds); nested exception is:
javax.naming.AuthenticationException: Invalid username/password for defa
ult (sds)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminCo
nsole.java:105)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java
:27)
javax.naming.NamingException: Lookup error: javax.naming.AuthenticationException
: Invalid username/password for default (sds); nested exception is:
javax.naming.AuthenticationException: Invalid username/password for defa
ult (sds) [Root exception is javax.naming.AuthenticationException: Invalid usern
ame/password for default (sds)]
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:153)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminCo
nsole.java:102)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java
:27)
Caused by: javax.naming.AuthenticationException: Invalid username/password for d
efault (sds)
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2410
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2226
at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1692)
at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:727)
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:134)
... 2 more
---- Embedded exception
javax.naming.AuthenticationException: Invalid username/password for default (sds
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2410
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2226
at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1692)
at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:727)
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:134)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminCo
nsole.java:102)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java
:27)
Any suggestions to fix this error?
Thanks in advance for any help.

George,
The Readme.html file is available with the ejbqlsample.jar downloadable (Extract and find the doc in Ejbql\docs\Readme.html) which is printable.
Or,
If you are trying to print the file directly from OTN site, you need to set the Page-Setup Orientation to 'Landscape'.
Hope this helps.
Regards
Pushkala

Simple button help needed!

I want to make a simple round button that glows when you
mouse over it and depresses when you click it.
Apparently to do this I need to use Filters to make the glow
and bevels. But Filtersonly work on movie clips, buttons and text.
So I make a circle and convert it into a button symbol
(Btn1). Then I make another button symbol (Btn2) and use the first
button symbol (Btn 1) on the Up Over and Down frames of Btn 2.
Assorted Filters are applied to Btn 1 on the Up Over and Down
frames to get the effects I want.
I test the button (Btn2) using Enable Simple Buttons. It
works perfectly - glows on mouse over and depresses on click. Then
I try Test Movie -- and the button doesn't work!!!
Not does it work when exported as a SWF file!!!
I watched a tutorial video that came with my Flash Pro 8
Hands-On-Training (HOT) book and he used pretty much the same
technique -- except he only tested his button with Enable Simple
Buttons. I'll bet my house his didn't work with Test Movie either!
The stupid thing, is I was just able to achieve exactly what
I wanted very quickly using LiveMotion 2!
What is wrong here? Why is it so impossible to create a glow
button in Flash? Why has it been easy in Live Motion for years?
All help appreciated!
Thanks
craig

I thought the nesting button situation might be the problem
BUT there is no other way to apply Filters to Up, Down, etc. Also,
a freaking tutorial book described that as a valid method, but
obviously it ain't.
I tried using movieclips as well but basically had the same
problem.
I mentioned LiveMotion 2 because that ancient program can do
easily what Flash Pro 8 seems incapable of.
What is the logic behind not allowing Filters to be applied
to simple graphics? It's absurd!
There's got to be a way...

Help needed finding display port (NOT mini) to VGA adapter please!

I bought a macbook in 2009 and urgently need a VGA adapter (female) but I don't have a mini display port! Help! I can't seem to find an adapters that suit macbooks before the mini dislay port was brought out.
Thanks
Kirsten

Welcome to Apple Support Community.
If you have an earlier MacBook 2006-early 2009, it has a mini-DVI port.
http://store.apple.com/us/product/M9320G/A/apple-mini-dvi-to-vga-adapter
Search for 'mini DVI to VGA adapter' online, and you will find many sources for an adapter compatible with your MacBook.

File Compression Questions/Help Needed

Question, I have just completed an audio presentation project (audio book on CD) for a client (681 mgs) which I now need to have replicated 1500 times over. The problem is my outsourced replicator will only press cd's up to 650 mgs. Therefore, I need to figure out how to compress the presentation just slightly (as to not lose tone quality) to get in onto the disc. (The CD Rom will be played in the car or computer Cd players)
I used the Soundtrack 1.2 to complete the project and also have Quicktime pro, however, I'm not sure what to do and how to change the settings to get the compression correct.
Thanks

Is it something you can simply save as an .aif file, then import it into iTunes and then compress it to mp3 at, say, 256 Kbps? That's pretty good... but if you're looking for better... perhaps an mp2? Not easy to find an mpeg1 layer 2 compression utility, but I use Sound Converter:
http://www.dekorte.com/projects/shareware/SoundConverter/
It's a start...
CP

Help needed finding tools or terminology

Third try due to login and post problems ...
I'm looking for some tools to help me with some graphical layout needs,
Part of my problem is that all the keywords an phrases I can think of to fo a Google or forum search bring up too much that I don't want.
Any pointers to tools or terminology would be appreciated.
I have a couple of graphical layout needs.
One application needs to place 'widgets' of a few predefined types on a canvass, connect them with lines, set properties, and display them in different colors/apperance based upon their status. I'm sure everyone has encountered many applications which do this kind of thing. I even coded a couple in SWING myself. This time I hope someone has a toolkit which does all the basics and I can concentrate on my application needs.
A similar need is a layout manage which allows selection of 'widgets' of various types and placement on a tree or directed, acyclic graph according to a limited set of rules (e.g., you can add a leaf or a branch to a branch, but you cannot add a branch to a leaf).
A third variation allows construction of 'composit widgets' from a selection of basic widgets according to a set of rules (e.g., you can make a car using one engine, one body and 4 wheels).
Any ideas of tools that may help me?
Any suggestions of how/where to search to find any such tools?
Thanks,
-- Frank

third time and no answer? he you will not get any answer. This looks like a general problem.
but some terminology for you:
- graphs
- graph-algorithms
- wrong forum
- branches are leafs as long as they have no childs
This is not a problem really belonging to swing. What you need is algorithms. So post in the algorithm forum.
May it helps: MVC. You need the C and the M, swing will only be the V.
There are a lot of tools out in the net for deploying graphs, with definable nodes, nodeproperties, different graphtypes. Just look out for them (graph, graph-layout,etc.)
regards

Simple viewer help needed please

I need help with this exact problem please which was posted by Kirby on 9th Feb
I can't save into the idisk/web folder although I can copy the files over after they refuse to open (if that means anything)...
"This is for Old Toad. I checked out your demo site which is awesome. I read the tutorial,
Examples of SimpleViewer and Flash Album Exporter Slideshows (plugins for iPhoto)
ADDED USING HTML SNIPPET AND IFRAME
This was great but I am still running into a roadblock. The issue seems to be that in the URL that is given on your demo page...
http://web.me.com/youraccountname/slideshow folder/index.html
....it says to enter my account name (which I did).
I am uploading the simple-viewer folder to my iDisk using the Go menu but inside of the Web/Sites folder there is no folder called Slideshow Folder. So am I right in thinking that the URL has nothing to point too because that folder isn't there? Why isn't it there? And is there anything I can do to solve this? Is there another place the simple-viewer folder should be on my idisk?"

Hi:
When you create the simpleviewer slideshow with iPhoto's plugin there should be a folder created on your HD that contains the items seen in the screenshot below:
The folder was named simpleviewer because that's what I named it during the export from iPhoto. That's the same folder as I refer to as "Slideshow folder". It can be whatever you name it when exporting from iPhoto. Upload that folder to your iDisk/Web/Sites folder as shown below:
In the iFrame code use the following URL to the index.html file inside the simpleviewer folder:
http://web.me.com/YourMMe_AccountName/simplerviewer/index.html
That should do it.

Stupid Question Help needed....

Hi Folks...
I have a very Stupid Question....
but i think you Folks here can help me Quick...
Here is what i want to do...
01 class ourCar {
02
03 public String color;
04
05 public void PrintValue(String YourValue){
06      System.out.println(this.YourValue );
07
08      }
09 }
10
11 public class myApp {
12 public static void main (String[] args) {
13
14 ourCar Car1;
15 Car1 = new ourCar();
16
17 Car1.color = "red";
18 Car1.PrintValue("color");
19 }
20 }
So the Compiling Problem starts at 05 it seems i cant
get Parameter Names with Strings... so what i want to do is...
type
Car1.PrintValue("color");
and it should print out red
i Know i could write
System.out.println(car1.color);
But i want to do it the other way...
a other thing would be to make
myVar = "car1.color"
and then run
System.out.println(myVar);
but these is also not working...
any idears?
greetings from munich
peter

but where is the Thinking Error i have?
KJKrum wrote i should not use the language this way...
what would be the right way for doing a job like this?You have a very simple example. Reflection which is what both threads suggest as a solution is complex and should be used with caution because of the performance and maintenance problems that can arise.
So one has to wonder, for such a simple problem, does it not suggest that perhaps your design is not correct and if you took another look at it you could come up with a solution that is more appropriate and leads to code with is much simpler.
I believe that was the intent of the suggestion.
For example if you really must access 'attributes' via a key then have you considered that perhaps you don't have attributes but rather 'properties'. And if so there is already a Properties class. And if the Properties class is a little to constraining then the Hashtable might also fulfill what you are trying do. Keep in mind that these depend on whether the best design for your project really requires accessing values via a string.

Simple question, help needed? Finder icons

Similar Messages

Maybe you are looking for