SIMPLE QUESTION - HELP!

This may sound like a stupid question, but I need help. I
click "open" and the window that shows up for me to choose a file
is so big that it is off the monitor screen. I can barely click
"Cancel" if I need to. Does anyone know how to get this window to
open smaller? I tried preferences, but no luck.... help.

Jeannie Olson wrote:
> This may sound like a stupid question, but I need help.
I click "open" and the
> window that shows up for me to choose a file is so big
that it is off the
> monitor screen.
What is your platform and operating system?
On Mac OS X, try deleting
User/Library/Preferences/com.macromedia.freehand.11.plist.
This stores Mac OS Navigation Services preferences for FH 11.
Judy Arndt

Similar Messages

P35 Platinum simple question help needed!

Helo......
Take a look into this picture:
http://www.subir-imagenes.com/imagenes/de5066b3c6.jpg
mirror: http://img514.imageshack.us/my.php?image=p35platinumep8.jpg
screws holes: http://www.hardwaresecrets.com/fullimage.php?image=7420
I have seen this 2 holes placed at copper passive cooler system, just besides the memory, and at a height allowing to put a 80mm fan (I guess but not tried) just almost "touching" memory modules....
For me, it would be great since my Q6600 CPU use to be at nearly 50º with zalman 9700, and motherboard gives 45º usually...... memory is very hot... 4 modules of 2.0v kingstom hyperx 4-4-4-12 for 4Gbs........
Someone tried to put there a fan????????
Are these holes specially there to do that way??????
If you put a fan there, you would do it extracting air from memory modules, or just pushing air to them?????
Thanks!

Quote from: Maesus on 26-September-07, 04:18:31
2 screw holes? got picture?
isn't those 2 screw holes to mount the extended heatsink beside the DIMM?
mmm.......
I refer to this "supposed to be" screw holes, as they seems it to me at least...
http://img170.imageshack.us/my.php?image=screwholesef4.jpg
You talk about a "extended heatsink beside DIMM"..... I cannot find any documentation about an extended heatsink anywhere (maybe a bit blind, so, if you were so kind, can you please tell me something about it or maybe give a simple link for it?? I wish to refrigerate better my memory modules and chipset with my zalman 9700, and this holes just over there without any purpose (for me) are getting me crazy...
Also I tried to give airflow to the memory modules through an 80mm fan situated on the thermaltake shark chasis (Mc Giver wouldn´t do it better) and the result is Zalman 9700 is taking all the air from the fresh airflow of the new fan besides, resulting in cooler CPU, but hotter memory and chipset.... pfffffffffffffffff............

Simple question, help needed? Finder icons

In finder have lost the music folder on the left sidbar(the one beside 'pictures' and 'movies' etc..) how do i get this folder back with the nice default music icon?

Ribbs,
I should have paid more attention your original question.
Sorry for pointing out the obvious.
Removal and replacement of the Music Folder from the Sidebar on my system always results in the Treble Cleff icon representing the Music Folder. Seems like there might be some kind of cache or plist corruption problem with your system.
I would advise that you read, Maintaining Mac OS X and Running the Mac OS X maintenance scripts by Dr. Smoke for some troubleshooting tips.
;~)

Help with simple question.......

This is a simple question but i can't seem to figure it out.
For example i am using this code...
feel free to run this code...
When you run this you see the scrollbars with the Swing look (Bars look so nice)...
I am using this same type of code in my other project with JBuilder 7 and I am getting the plain look of the scrollbars.
Any suggestions will be greatly appreciated..
=======================================================
import javax.swing.JTable;
import javax.swing.JScrollPane;
import javax.swing.JPanel;
import javax.swing.JFrame;
import java.awt.*;
import java.awt.event.*;
public class SimpleTableDemo extends JFrame {
private boolean DEBUG = true;
public SimpleTableDemo() {
super("SimpleTableDemo");
Object[][] data = {
{"Mary", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Chasing toddlers", new Integer(2), new Boolean(false)},
{"Mark", "Andrews",
"Speed reading", new Integer(20), new Boolean(true)},
{"Angela", "Lih",
"Teaching high school", new Integer(4), new Boolean(false)}
String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
final JTable table = new JTable(data, columnNames);
table.setPreferredScrollableViewportSize(new Dimension(500, 70));
if (DEBUG) {
table.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
printDebugData(table);
//Create the scroll pane and add the table to it.
JScrollPane scrollPane = new JScrollPane(table);
//Add the scroll pane to this window.
getContentPane().add(scrollPane, BorderLayout.CENTER);
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
private void printDebugData(JTable table) {
int numRows = table.getRowCount();
int numCols = table.getColumnCount();
javax.swing.table.TableModel model = table.getModel();
System.out.println("Value of data: ");
for (int i=0; i < numRows; i++) {
System.out.print(" row " + i + ":");
for (int j=0; j < numCols; j++) {
System.out.print(" " + model.getValueAt(i, j));
System.out.println();
System.out.println("--------------------------");
public static void main(String[] args) {
SimpleTableDemo frame = new SimpleTableDemo();
frame.pack();
frame.setVisible(true);

any help will get DUKE $$$$$$$$$$$$$$$$

SIMPLE QUESTION: LYNC 2010 -- AVAYA CS1000 DIRECT SIP: IS THAT POSSIBLE? PLEASE HELP!

Hello,
I would like to ask really simple question here: is that possible to establish (configure, setup, create, make etc.) a direct SIP connection between LYNC 2010 and AVAYA CS1000 PBX. On one side I have Lync 2010 Standard Edition acting as Front-End Server
with co-located Mediation Server. On another side I have AVAYA CS1000 IP PBX Version 7.0. We are trying to make this happen for 1 full year with no luck. The issue is that we do not manage our PBX (external company does).
Here is what we are basically trying to achieve:
All I want is that basically LYNC user (phone # 5678) can dial PBX user (phone # 1234) and talk. Also PBX user can call LYNC user and they can talk. I'm pretty sure that all I'm asking is very simple thing. I don't expect magic to happen (e.g. when one user
calls another user the world will change). All I want is to be able to call between LYNC and PBX users so they can talk.
Sorry for repeating again but here is my simple question: can direct SIP (or call it SIP trunk if this is the right word) be established so LYNC and PBX users can call each other and talk. Whatever protocol is (G.711, G.722 etc.) I will be happy.
If you can let me know I would very much appreciate this. I'm sure I'm not alone in this world and many companies out there using AVAYA CS1000 and deployed LYNC and probably have the same question so it may be helpful to other people as well.
Thanks!

Hi Thamara for reply. I can see where you are going, but the challenge here is that I have found many threads including in this forums from people who successfully connected CS1000 PBX to Lync 2010 for two-way calling, and even dual-forking (which I cannot
even dream about at this time).
If you go to AVAYA WEB site, you can find official AVAYA compatibility MATRIX that is available here:
http://www.google.ca/url?sa=t&rct=j&q=avaya%20compatibility%20matrix%20lync&source=web&cd=1&ved=0CBwQFjAA&url=http%3A%2F%2Fsupport.avaya.com%2Fcss%2FP8%2Fdocuments%2F100135385&ei=v3-5TsXVKMLX0QGHpdSkCA&usg=AFQjCNG6cmW5izdOASMuW34b8iK0vWnwuw
According to this document, only CS1000 version 7.5 supports Lync 2010 and only via ACE - starting first quarter of 2011 (which is done deal by now) - see below for details. The problem is that I have a hard time to understand the meaning of the word "Supported".
I do not really need full support, all I want is to be able to call in both directions using 2 distinct numbers (e.g. 4 digits extensions) that are configured in both systems.
Another thing is this ACE. Apparently it is a big monster software that you need to buy and pay big bucks and lots of configuration just to make it working. But I'm not even sure what will work. We do have one-way calling (from Lync to PBX) - it just does
not work other way, and I have no idea why. I'm not sure if this cannot be working, or because it was not setup right. As I mentioned before we have no access and clue about IP PBX - this is one of my issue here. Withoul knowledge how it works on PBX side
I cannot be sure what is causing this.
So I was wondering if anybody in this world was able to connect CS1000 PBX to Lync and perform two-way calling using two systems.
Thanks!
Microsoft OCS 2010 Lync
Supported (via ACE) - 1Q11

A simple question please help.

Hi
I have 2 textfields and a button. I want to input a number( diameter) in the first textfield ( inputField) and by clicking on the button (myButton), I want to get the result (circonference) in the second textfield ( inputField1). diameter*3.14. I know it is a simple question, but it comes from a very simple mind. So have mercy on me.
import flash.display.Sprite;
import flash.text.TextField;
import flash.text.TextFieldAutoSize;
import flash.text.TextFormat;
import flash.text.TextFormatAlign;
import flash.events.MouseEvent;
var inputField:TextField = new TextField();
var myFormat:TextFormat = new TextFormat();
myFormat.size = 44;
inputField.defaultTextFormat = myFormat;
inputField.restrict = "0-9";
inputField.maxChars = 6;
inputField.multiline = false;
inputField.textColor = 0x000000;
inputField.border = true;
inputField.width = 150;
inputField.height = 50;
inputField.x = 75;
inputField.y = 50;
inputField.borderColor = 0xFF0000;
inputField.type = "input";
addChild(inputField);
var inputField1:TextField = new TextField();
var myFormat1:TextFormat = new TextFormat();
myFormat1.size = 44;
inputField1.defaultTextFormat = myFormat;
inputField1.maxChars = 1;
inputField1.multiline = false;
inputField1.textColor = 0x000000;
inputField1.border = true;
inputField1.width = 150;
inputField1.height = 50;
inputField1.x = 275;
inputField1.y = 50;
inputField1.borderColor = 0xFF0000;
addChild(inputField1);
myButton.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_2);
function fl_MouseClickHandler_2(event:MouseEvent):void
trace("Mouse clicked");

use:
import flash.display.Sprite;
import flash.text.TextField;
import flash.text.TextFieldAutoSize;
import flash.text.TextFormat;
import flash.text.TextFormatAlign;
import flash.events.MouseEvent;
var inputField:TextField = new TextField();
var myFormat:TextFormat = new TextFormat();
myFormat.size = 44;
inputField.defaultTextFormat = myFormat;
inputField.restrict = "0-9";
inputField.maxChars = 6;
inputField.multiline = false;
inputField.textColor = 0x000000;
inputField.border = true;
inputField.width = 150;
inputField.height = 50;
inputField.x = 75;
inputField.y = 50;
inputField.borderColor = 0xFF0000;
inputField.type = "input";
addChild(inputField);
var inputField1:TextField = new TextField();
var myFormat1:TextFormat = new TextFormat();
myFormat1.size = 44;
inputField1.defaultTextFormat = myFormat;
inputField1.maxChars = 1;
inputField1.multiline = false;
inputField1.textColor = 0x000000;
inputField1.border = true;
inputField1.width = 150;
inputField1.height = 50;
inputField1.x = 275;
inputField1.y = 50;
inputField1.borderColor = 0xFF0000;
addChild(inputField1);
myButton.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_2);
function fl_MouseClickHandler_2(event:MouseEvent):void
inputField1.text=String(Math.PI*Number(inputField.text));

Current Year and current month?simple question

How can i get four Digit current Year and two digit current month. So if is march it should get me as 03 and the Year as 2002. Please do help me, is a simple question isn't it ?. Thanks for your earliest response.
Thank you.

i have a directory structre of the format
REPTS2000209/E200209-98000001
in which 2002 is current YEAR
09 is current month
and 9800001 is the code i would submit(list box) from a form
so what i need is a program that can generate the above path and open that particular PDF file
so basically E200209-98000001.pdf is the PDF file.
i am submitting it from JSP page. PLEASE HELP ME how can i program.

A simple Question about % in CR Chart!

Hi, I have another simple question.
When i use SQL to storage data and wanna Crystal Report to display the data in chart using %
which data type should i use?
float or string?
and I found when i use 0.12 as 12% in database , It could not display in Crystal Report line chart normally.
What should I do??
Please Help!!!
Thank you VERY MUCH!!!

If you have the datatype as string from your database then try adding the string field as a summary field in chart and select maximum instead of count and if you have them in number format then you can directly select the percentage in chart.
Regards,
Raghavendra

Simple question about generate proxy

Hi guys...
This is a simple but a truly simple question....
When trying to create a proxy from our messages interfaces using SPROXY, i'm not able to get the Software component versions that were used from the sld...
Do I have to export them? Or import them?

Hi Goncalo,
Check if it helps...
Re: SW component version not visible in SPROXY
Regards
Anand

Adobe Lightroom 4 - Some Questions / Help Needed

Hi everyone.
After advice from several experts, I've just purchased Adobe Lightroom 4. I've already got Photoshop CS5, but I was looking for something proper to organise my photos, plus I found Lightroom easier to do the sort of editing I am wanting to do. Now, I only really use photoshop for things like colour pops, or really in-depth editing. Anyway, I'm loving Lightroom so far, but there is some stuff I'm not very sure of, so I'd appreciate some help
1. Organising
Firstly, I'm not really sure how to organise. At the moment, I've just got lots of folders with random events in My Pictures on W7, so I might have a folder called April 11, which contains photos from that month but that might have been a wedding or an easter holiday or both. So it doesn't really work. \
I understand in Lightroom what catalogs are. But I know enough to know that I don't want to group mine into those, its getting too complicated. What I don't know though is the difference between a collection and a folder. Basically, I'm wanting to reimport and reorganise all my photos, so I want to put them into "events" as such like you can do on iPhoto on a mac, so I would have "France Summer Holiday 11" for example, or "Mia's Wedding". I'm not really sure on the best way to do this ...?
2. Editing
I've played around quite a bit so far, and I really like what I've seen. On a lot of photos, I've made a lot of changes. But from what I can see, these changes are stored merely in Lightroom itself. For example, at the moment I'm importing photos from my external disk into Lightroom, which then saves them in C://My Pictures/Lightroom/Pictures . When I go look at these photos in windows explorer which I know I have edited, it doesn't show any of the changes or editing I've done on them. Now I realise this is me being stupid, but why doesn't it? Supposing I then want to email that photo to a friend that I have edited? How would I do that? I don't want to have to open lightroom and export every single photo I edit? There must be a simpler way?
Likewise for backing up, because all my files are in subfolders within C:// My pictures / Lightroom / Pictures, to back up I was simply going to set up windows to copy that latter folder onto my external HDD everytime I plugged it in. This would be pointless however if it isn't physically overwriting the original photo with my edited version?
3. Editing 2
Something else I like to do is make lots of different edits to the same photo. For example, at the moment I'm editing a photo of a pier at night. I spent ages adjusting colours and lighting and so on, and now it looks great. But I would also like to save a copy of that photo with the "old age photo" effect preset on. Is this possible? and how do I do it? Other than obviously importing a duplicate?
4. & 5. & 6 - Misc:
4. Simple question - how do I add tags, keywords or comments if I haven't done it on import?
5. My camera doesn't have built in GPS. Is it possible for me to manually geotag photos (in a batch, say for a Summer Holiday to NY), could I manually add a geotag for all these photos?
6. I also forgot to add copyright information on import for some, is it possible to do this after import and how?
7. I normally shoot in JPEG. I probably shoot shoot in RAW as everyone tells me to do so. Are there any significant advantages in terms of quality, and for editing with?
Thanks for any help given. I appreciate this is a lot of questions, but I could really use the advice.

Hi William,
1. Organising
Firstly, I'm not really sure how to organise. At the moment, I've just got lots of folders with random events in My Pictures on W7, so I might have a folder called April 11, which contains photos from that month but that might have been a wedding or an easter holiday or both. So it doesn't really work. \
I understand in Lightroom what catalogs are. But I know enough to know that I don't want to group mine into those, its getting too complicated. What I don't know though is the difference between a collection and a folder. Basically, I'm wanting to reimport and reorganise all my photos, so I want to put them into "events" as such like you can do on iPhoto on a mac, so I would have "France Summer Holiday 11" for example, or "Mia's Wedding". I'm not really sure on the best way to do this ...?
I am not so sure if you understand *catalogs*.
You need a catalog, exactly 1 in my opinion. A catalog is a database. The Lightroom database, where records about your images are stored, including the pointers to your images, which are not inside a catalog! LR backups just does the backup of the catalog (i.e. a file ending .lrcat). You need to take care separately that your real images are backed up !
Inside your LR database the best way to organize is via collections - this will give you what you want with "France summer holiday 11" etc.
Folders are relatively unimportant, just storage buckets. They should be *handy portions*, I would prefer them with below 3000 images each, as there currently some bugs to those bigger ones.
Before you start with LR, you can organize your pictures in Mac Finder / WindowsExplorer.
Or you could do it with the help of LR, by copying your images over during import into the destination folders (and deleting today's folders afterwards after having verified that everything is fine).
A simple date-based structure will do, I'd recommend a root parent folder like "LR images", underneath one folder per year (\2010\, \2011\, \2012\...) and underneath them either
just one folder per month (LR can auto-create them for you)
or you create the folders in import dialog as e.g. "YYYY-MM-DD description of shoot", to have a mini-diary overview also in your OS.
Apart from that you create collections, either *dumb ones*, where you drag images into, or smart ones, where you specify criteria according to which they get auto-filled.
2. Editing
I've played around quite a bit so far, and I really like what I've seen. On a lot of photos, I've made a lot of changes. But from what I can see, these changes are stored merely in Lightroom itself. For example, at the moment I'm importing photos from my external disk into Lightroom, which then saves them in C://My Pictures/Lightroom/Pictures . When I go look at these photos in windows explorer which I know I have edited, it doesn't show any of the changes or editing I've done on them. Now I realise this is me being stupid, but why doesn't it? Supposing I then want to email that photo to a friend that I have edited? How would I do that? I don't want to have to open lightroom and export every single photo I edit? There must be a simpler way?
Likewise for backing up, because all my files are in subfolders within C:// My pictures / Lightroom / Pictures, to back up I was simply going to set up windows to copy that latter folder onto my external HDD everytime I plugged it in. This would be pointless however if it isn't physically overwriting the original photo with my edited version?
LR will never overwrite your original photos.
You can save most of the catalog content into the xmp-part of the original photo, which is either a sidecar-file (.xmp) or part of the file format, like for DNG, TIFF, PSD, JPG. To do so you select the image in LR and hit <ctrl> s. Or you set it up for continuous update, which creates a lot of operations while you play back and forth in develop.
I do that on my own, typically twice per file: once I am done with develop, once I am done with keywording and other metadata update.
LR contains records about your images, i.e. a set of instructions how they are to be interpreted. That is all.
So of course you need LR to export the result of these instructions, which is actually pretty quick.
To backup your images you need to do that just once, plus you backup your LR catalog. Or if you save xmp to the files, you can do another backup once xmp is ready.
I would not consider this pointless. You just have to think that there are 2 places with data for your images: the images themselves and a database with interpretation instructions.
3. Editing 2
Something else I like to do is make lots of different edits to the same photo. For example, at the moment I'm editing a photo of a pier at night. I spent ages adjusting colours and lighting and so on, and now it looks great. But I would also like to save a copy of that photo with the "old age photo" effect preset on. Is this possible? and how do I do it? Other than obviously importing a duplicate?
Yes, this is one of LR's beauties: you create a so-called *virtual copy*, which is just a 2nd record for the same original image file with different interpretation settings, like black-and-white, a different crop size, different development etc. You can have as many virtual copies as you like, and you'll see them as additional thumbnails.
Virtual copies are not saveable into xmp, though. There is another concept which is saveable into xmp: snapshots. but these are different states in develop history, and you do not see outside develop module that you have several.
If you export virtual copies e.g. to jpg one file per virutal copy will be created.
4. & 5. & 6 - Misc:
4. Simple question - how do I add tags, keywords or comments if I haven't done it on import?
5. My camera doesn't have built in GPS. Is it possible for me to manually geotag photos (in a batch, say for a Summer Holiday to NY), could I manually add a geotag for all these photos?
6. I also forgot to add copyright information on import for some, is it possible to do this after import and how?
7. I normally shoot in JPEG. I probably shoot shoot in RAW as everyone tells me to do so. Are there any significant advantages in terms of quality, and for editing with?
Thanks for any help given. I appreciate this is a lot of questions, but I could really use the advice.
ad 4: you use the library module, metadata panel to enter.
ad 5: you use the map module. Either you manually drop your images on a map, or you have a separate GPS track to load and have LR assign via matching time-stamps.
ad 6: like 4
ad 7: You don't need JPG from your camera, you can achieve better results viy LR from RAW. Yes, there are significant advantages as to editing headroom.
Overall, may I suggest my favorite learning material for LR? First watch Julieanne's Tutorial Videos.
Then go play and use Victoria Bampton's eBook or paper copy of her "Missing FAQs to LR4": http://www.lightroomqueen.com/books/adobe-lightroom-4-missing-faq/
Have fun,
Cornelia

Load Balancing Directory Servers with Access Manager - Simple questions

Hi.
We are in the process of configuring 2 Access Manager instances (servers) accessing the same logical LDAP repository (comprising physically of two Directory Servers working together with Multi-Master Replication configured and tested) For doing this, we are following guide number 819-6258.
The guide uses BigIP load balancer for load balancing the directory servers. However, we intend to use Directory Proxy Server. Since we faced some (unresolved) issues last time that we used DPS, there are some simple questions that I would be very grateful to have answers to:
1. The guide, in section 3.2.10 (To configure Access Manager 1 with the Directory Server load balancer), talks about making changes at 4 places, and replacing the existing entry (hostname and port) with the load balancer's hostname and port (assuming that the load balancer has already been configured). It says that changes need not be made on Access Manager 2 since the LDAPs are in replication, and hence changes will be replicated at all places. However, the guide also states that changes have to be made in two files, namely AMConfig.properties, and the serverconfig.xml file. But these changes will not be reflected on Access Manager 2, since these files are local on each machine.
Question 1. Do changes have to be made in AMConfig.properties and serverconfig.xml files on the other machine hosting Access Manager 2?
Question 2: What is the purpose of putting these values here? Specifically, what is achieved by specifying the Directory server host and port in AMConfig.properties, as well as in serverconfig.xml?
Question 3. In the HTTP console, there is the option of specifying multiple primary LDAP servers, as well as multiple secondary LDAP servers. What is the purpose of these? Are secondary servers attempted when none of the list in the primary list are accessible? Also, if there are multiple entries in the primary server list, are they accessed in a round robin fashion (hereby providing rudimentary load balancing), or are other servers accessed only when the one mentioned first is not reachable etc.?
2. Since I do not have a load balancer setup yet, I tried the following deviation to the above, which, according to me, should have worked. If viewed in the HTTP console, LDAP / Membership / MSISDN and Policy configuration all pointed to the DS on host 1. When I changed all these to point to the directory server on host 2 (and made AMConfig.properties and serverconfig.xml on host 1 point to DS of host 2 as well), things should have worked fine, but apparently Access manager 1 could not be started. Error from Webserver:
[14/Aug/2006:04:30:36] info (13937): WEB0100: Loading web module in virtual server [https-machine_1_FQDN] at [search]
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: Exception in thread "EventService" java.lang.ExceptionInInitializerError
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: at com.iplanet.services.ldap.event.EventServicePolling.run(EventServicePolling.java:132)
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: at java.lang.Thread.run(Thread.java:595)
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: Caused by: java.lang.InterruptedException
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: at com.sun.identity.sm.ServiceManager.<clinit>(ServiceManager.java:74)
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: ... 2 more
In effect, AM on 1 did not start. On rolling back the changes, things again worked like previously.
Will be really grateful for any help / insight / experience on dealing with the above.
Thanks!

Update to the above, incase anyone is reading:
We setup a similar setup in Windows, and it worked. Here is a detailed account of what was done:
1. Host 1: Start installer, install automatically, chose Directory server, Directory Administration server, Directory Proxy server, Web server, Access Manager.
All installed, and worked fine. (AMConfig.properties, serverconfig.xml, and the info in LDAP service, all pointed to HOST1:389)
2. Host 2: Start installer, install automatically, chose Directory server, Directory Administration server, Directory Proxy server, Web server, Access Manager.
All installed, and worked fine. (AMConfig.properties, serverconfig.xml, and the info in LDAP service, all pointed to HOST2:389)
3. Host 1: Started replication. Set to Master
4. Host 2: Started replication. Set to Master
5. Host 1: Setup replication agreement to Host 2
6. Host 2: Setup replication agreement to Host 1
7. Initiated the remote replica from Host 1 ----> Host 2
Note that since default installation uses abc.....xyz as the encryption key, setting this to same was not an issue.
9. Started webserver for Host 1 and logged into AM as amadmin.
10. Added Host 2 FQDN in DNS Aliases / Realms
11. Added http://HOST2_FQDN:80 in the Platform server (instance) list.
12. Started Host 2 webserver. Logged in AM on Host 2, things worked fine.
At this stage, note the following:
a) Host 1:
AMConfig.properties file has
com.iplanet.am.directory.host=host1_FQDN
and
com.iplanet.am.directory.port=389
serverconfig.xml has:
<Server name="Server1" host="host1_FQDN" port="389" type="SIMPLE" />
b) Host 2:
AMConfig.properties file has
com.iplanet.am.directory.host=host2_FQDN
and
com.iplanet.am.directory.port=389
serverconfig.xml has:
<Server name="Server1" host="host2_FQDN" port="389" type="SIMPLE" />
c) If one logs into AM, and checks LDAP servers for LDAP / Policy Configuration / Membership etc services, they all contain Host2_FQDN:389 (which makes sense, since replica 2 was initialized from 1)
Returning back to the configuations:
13. On Host 1, login into the Admin server console of the Directory server. Navigate to the DPS, and confgure the following:
a) Network Group
b) LDAP servers
c) Load Balancing
d) Change Group
e) Action on-bind
f) Allow all actions (permit modification / deletion etc.).
g) any other configuations required - Am willing to give detailed steps if someone needs them to help me / themselves! :)
So now, we have DPS configured and running on Host1:489, and distributing load to DS1 and DS2 on a 50:50 basis.
14. Now, log into AM on Host 1, and instead of Host1_fqdn:389 (for DS) in the following places, specify Host1_fqdn:489 (for the DPS)--
LDAP Authentication
MSISDN server
Membership Service
Policy configuation.
Verified that this propagated to the Policy Configuration service and the LDAP authentication service that are already registered with the default organization.
15. Log out of AM. Following the documentation, modify directory.host and directory.port in AMConfig.properties to point to Host 1_FQDN and 489 respectively. Make this change in AMConfig.properties of both Host 1 as well as 2.
16. Edit serverconfig.xml on both hosts, and instead of they pointing to their local directory servers, point both to host1_FQDN:489
17. When you start the webserver, it will refuse to start. Will spew errors such as:
[https-host1_FQDN]: Sun ONE Web Server 6.1SP5 B06/23/2005 17:36
[https-host1_FQDN]: info: CORE3016: daemon is running as super-user
[https-host1_FQDN]: info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_04] from [Sun Microsystems Inc.]
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [amserver]
[https-host1_FQDN]: warning: WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [ampassword]
[https-host1_FQDN]: warning: WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [amcommon]
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [amconsole]
[https-host1_FQDN]: warning: WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [search]
[https-host1_FQDN]: warning: CORE3283: stderr: netscape.ldap.LDAPException: error result (32); matchedDN = dc=sun,dc=com; No such object (DN changed)
[https-host1_FQDN]: warning: CORE3283: stderr: Got LDAPServiceException code=-1
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getConnection(DSConfigMgr.java:357)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewFailoverConnection(DSConfigMgr.java:314)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewConnection(DSConfigMgr.java:253)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewProxyConnection(DSConfigMgr.java:184)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewProxyConnection(DSConfigMgr.java:194)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.initLdapPool(DataLayer.java:1248)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.(DataLayer.java:190)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.getInstance(DataLayer.java:215)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.getInstance(DataLayer.java:246)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.ldap.SMSLdapObject.initialize(SMSLdapObject.java:156)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.ldap.SMSLdapObject.(SMSLdapObject.java:124)
[https-host1_FQDN]: warning: CORE3283: stderr: at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[https-host1_FQDN]: warning: CORE3283: stderr: at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[https-host1_FQDN]: warning: CORE3283: stderr: at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[https-host1_FQDN]: warning: CORE3283: stderr: at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
[https-host1_FQDN]: warning: CORE3283: stderr: at java.lang.Class.newInstance0(Class.java:350)
[https-host1_FQDN]: warning: CORE3283: stderr: at java.lang.Class.newInstance(Class.java:303)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.SMSEntry.(SMSEntry.java:216)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.ServiceSchemaManager.(ServiceSchemaManager.java:67)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.am.util.AMClientDetector.getServiceSchemaManager(AMClientDetector.java:219)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.am.util.AMClientDetector.(AMClientDetector.java:94)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.mobile.filter.AMLController.init(AMLController.java:85)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ApplicationFilterConfig.getFilter(ApplicationFilterConfig.java:262)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ApplicationFilterConfig.setFilterDef(ApplicationFilterConfig.java:322)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ApplicationFilterConfig.(ApplicationFilterConfig.java:120)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardContext.filterStart(StandardContext.java:3271)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardContext.start(StandardContext.java:3747)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[https-host1_FQDN]: failure: WebModule[amserver]: WEB2783: Servlet /amserver threw load() exception
[https-host1_FQDN]: javax.servlet.ServletException: WEB2778: Servlet.init() for servlet LoginLogoutMapping threw exception
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:949)
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
[https-host1_FQDN]: at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
[https-host1_FQDN]: at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
[https-host1_FQDN]: at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[https-host1_FQDN]: ----- Root Cause -----
[https-host1_FQDN]: java.lang.NullPointerException
[https-host1_FQDN]: at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
[https-host1_FQDN]: at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
[https-host1_FQDN]: at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
[https-host1_FQDN]: at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[https-host1_FQDN]:
[https-host1_FQDN]: info: HTTP3072: [LS ls1] http://host1_FQDN:58080 [i]ready to accept requests
[https-host1_FQDN]: startup: server started successfully
Success!
The server https-host1_FQDN has started up.
The server infact, didn't start up (nothing even listening on 58080).
However, if AMConfig.properties is left as it originally was, and only serverconfig.xml files were changed as mentioned above, web servers started fine, and things worked all okay. (Alright, except for some glitches when viewed in /amconsole. If /amserver/console is accessed, all is good. Can this mean that all is still not well? I am not sure).
So far so good. Now comes the sad part. When the same is done on Solaris 9, things dont work. You continue to get the above error, OR the following error, and the web server will refuse to start:
Differences in Solaris and Windows are as follows:
1. Windows hosts have 1 IP and hostname. Solaris hosts have 3 IPs and hostnames (for DS, DPS, and webserver).
No other difference from an architectural perspective.
Any help / insight on why the above is not working (and why the hell does the documentation seem so sketchy / insecure / incorrect).
Thanks a bunch!

Compilations are breaking my heart-simple question...

OK folks, this is a simple question - so why can't i find a clear answer anywhere? I am running Itunes 8, Win XP, been running Itunes for my music for about 4 years.
Current setup 3 users running Itunes on same pC.
My problem is when I browse my lbrary each song in my compilations are showing upas different albums e.g. "O Brother where art thou" has 14 different "albums" as do some home-made compilations I have been given.
"group compilations when browsing is selected" but obviously isn;t working
It's obviously simple but not to me...help
Thanks
Message was edited by: munstershug

You mention enabling the iTunes option to *Group compilations when browsing*, but have you also set the *Part of a Compilation* flag to Yes for each track of your compilations? See my recent post on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Need a simple answer for simple question???

simple question... what is the best way to export my fce movie and burn it on idvd for the best quality for genaral use ... sd..4x3 ratio tv.. lots of ken burn effects on photos... lots of sd video... ???
not so simple answer... i have read manuals.. apple discussions.. etc etc my eyes are blurry.. i have been exporting out of fce to qk time movie, then import to idvd and burn..
i get lots of wavy or jitter when doing kens burn effects on photos.. i have been told that 1 field must be missing.. and its better to take the qk time movie convert it again making sure hi quality is checked(movie properties 720 x 480) and self contained movie, then import to imovie ver 5.02 which has better codecs then to idvd ... an apple store tech said..
then another apple store tech said...dv pro or dv stream or interlaced or on and on and on
its not 16x9, or for the web or anything but simply burn it and give it to my grandma to play in a standard dvd player.. best quality.. period.. i know it won't any better than my source video but the wavy photos bother me..
help

The Apple store tech told you garbage. The quality will be the same. It's using the same QuickTime engine. There may be a difference because going through iMovie will go through a file conversion and the picture might be softened a little, which will mitigated this flicker you see.
The wavy photos can be a lot of things, most likely due to the nature of the images themselves and the movements you've done on them. What often works on still images is to apply a one pixel vertical motion blur in an application like Photoshop or Elements. This helps to reduce interlace flicker on motion when the material is brought into a video editing application.

Simple question .... how to add photos to the body of my EMAILS -Found 1000 results for How do I add photos to my emails for Thunderbird

Simple question - How do I add photos to the body of my emails . But instead of the answer - Found 1000 results for How do I add photos to my emails for Thunderbird. There are answers that don't apply at all to the question in anyway. Why does it have to be so hard to get a simple answer to a simple question?
Thunderbird is acting much like Microsoft, the every reason I dumping MS Live Mail.

First of all, much help for Thunderbird refers to menus which may not be visible. It would help you and us if you have your menus and toolbars visible.
http://chrisramsden.vfast.co.uk/13_Menus_in_Thunderbird.html
So, open a write window. Enable its menu and toolbar(s).
Now do you see an "Insert" option?
If not, you may be set to compose in plain text, which does not support embedded images.
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|{select account}|Composition & Addressing''' and ensure "Compose messages in HTML format" is ticked. If it wasn't already ticked, go back to composing a message. Any better now?
Once you have HTML composition mode going, you can use '''Insert|Image''' or various permutations of copy-and-paste and drag-and-drop into your message body.
A manual, of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

A very very very simple question

Hi guys,
I have a very simple question and standard but I cant find anywhere...
I have two dateTime variables, i need to calculate difference between this dates in days, thats it.
I tried all functions and tried without success a Java Embed task but I couldnt retrieve this objects as java.util.Date so I couldnt calculate exactly the difference in days like this pure java code:
(dataVencimento.getTime() - dataReferencia.getTime()) / 86400000L)
can you help me this?

Hi Jose
Just see if these alternate approaches works. I know there may be lot like this and you may be lucky to find out simple out of box solution itself. If you want to solve this issue and move ahead, gives these approaches a shot.
1. Create a very simple standalone WebService that takes 2 input date elements (can be of Date type or String type. If string type, convert to date in your java code). Create a simple operation like getDaysBetween(firstDate, secondDate). In the generated webservice impl class, use the java code apis (refer earlier link for usage), and get the difference. Return this value. NOW, invoke this WebService in your BPEL Process, and pass your 2 inputs (if the bpel payload elemetns are date object or string objects of date), and get output, and then use this output in your continuing bpel process.
2. This approach, I did a long back. When we insert any expression using XPath, in that editor window on bottom right side, we see many categories and for each category we see list of functions we can use, like for String, we can use concat etc. I vaguely remember reading somewhere, that we can add our own custom functions also in this section. So explore this direction and see if you can add your own function and then use that fucntion with your 2 input dates.
I have not given solution to your problem, but may be these directions can help you move ahead. Or something along these lines.
Thanks
Ravi Jegga

SIMPLE QUESTION - HELP!

Similar Messages

Maybe you are looking for