Simple question - Playback on Cam

hi everyone!
A simple question if someone could help me out:
I'd like to view the playback of edited footage from PPro on my Camera's LCD (then onto a TV...).
When i go to the playback settings and click export there aint no camera there. I have no problem capturing, so PPro does see the camera.
Im using a SONY HVR-V1E, Windowns XP SP2, PPro CS3, 2Gb RAM, dual pentium, etc..
I read the manual and it says "In the playback settings dialogue box, click the desired settings." It simply says 'none' under device.
Am I mmissing something daft?!!
thanks guys..
Andrew-

There are some serious differences between DV and HDV. The real answer is to buy one of the graphics cards with component outputs, or a Matrox RTX.2 (wait until I get done testing it in a few weeks) or the Matrox Axio.
The graphics cards are not that expensive. Look at the Matrox Parhelia APVe (I will have one on EBay soon) and the NVidia Quadro FX-560.

Similar Messages

  • SIMPLE QUESTION - EXTERNAL iSIGHT CAMERA

    I just have a simple question...
    I was using an older iMac G5 with an external iSight camera and just upgraded to a new 24" iMac. Can the external iSight camera still be used on an iMac with a built-in camera?
    The cable with the external camera allows for more flexible viewing capability.

    Hello rgarros50
    The second part of your question is not quite so simple.
    Plug your external iSight in and turn it on. If you like, you can use the suggestions from How to test your (external) iSight to ensure it is functional to be sure it is working with your new iMac.
    The answer to your question about the "default camera" depends on which application you are using to operate your iSight. Here is how camera selection works in a few example:
    (1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
    Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
    (2) For instance, iMovie's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie uses a drop-down menu choice something like this (depending on which version of iMovie you use):
    Note: Because I have no built-in iSight, when my external iSight is disconnected, the drop-down menu shows only "Time Lapse." Because your iMac has a built-in iSight, your built-in iSight will show in the drop-down menu even when no other camera is connected. Connecting your external iSight should allow you to choose either camera.
    (3) Photo Booth is such a simple, basic app that it offers no menu selectable choice. Unless you make your built-in iSight the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
    However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use your Firewire external  iSight:
    • Connect your external iSight and turn it on.
    • Quit Photo Booth (PB) if it is running.
    • Launch any app with a user-selectable camera "Preferences..." menu command.
     (The "tip" suggests that you use iChat, but others should work as well.)
    • Open "Preferences..." and set the camera "Preference" to use your built-in iSight.
    • Now launch PB. PB should now use the external iSight
     because your built-in camera is in use by the other application.
    (4) For apps other than those above, see their Help or other documentation.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • Simple question:  White vs. Black Iphone 4 - what are the differences?  Some say that white is thinner with different camera.  Some say white is "faster"?

    Simple question:  White vs. Black Iphone 4 - what are the differences?  Some say that white is thinner with different camera.  Some say white is "faster"?

    White iPhone 4 vs. Black iPhone 4: Do They Have Different Cameras ...
    The white iPhone: Does size matter? | iPhone Atlas - CNET Reviews

  • HD video newbie question related to camera shooting mode

    Hi everyone
    I apologize in advance as this has been covered (sort of) but I cannot definitively answer my question reading other posts so perhaps your answers will clarify this for myself and future interested parties.
    I am ready to purchase a Canon HF S100 VIXIA camcorder after looking at a lot of reviews.
    I have iMovie9 and will be using this exclusively (I hope?)
    I am aware that if I edit anything or add transitions or image stabilization the video will be downgraded to SD, this is not related to my topic.
    Questions follow
    The camera supports 24p Cinema mode and 30p mode. Both of these shoot at 24 or 30 frames per second in HD using 60i which I presume means that each progressive frame is encoded in two sequential interlaced frames which must be combined (or something like that). I would like to use this mode as it has much better low light performance and I have a lot of indoor use, BUT---
    Will iMovie9 support this and display the video as a HD progressive scan frame or will it discard this information and keep it as 60i or fail or something else?
    Thanks for your help.

    Lionden wrote:
    .. 1080/60i - recordings made with the PF24, PF30 frame rate are converted and recorded on the memory as 60i
    afaik, most (all?) consumer camcorders, claiming '24p' (or Cinema or...), scale on export (or record) to 60i ..
    for me, this '24p' is mostly marketing... 24fps is a historic 'standard' for film/celluloid. in times, when displays claim 200fps, .. why 24? why not simple 29.97/30p (or here: 25)...?

  • Simple question about flex and AS 3.0

    Hi, this might sound like a simple question so I apologize...
    I have both a copy of flex 2 and 3, and i want to simply code in AS
    3.0 not mxml. I referred to the help of both flex 2 and 3, and all
    i could come up with is "you can add dynamic behavior to your
    documents using actionscript", which means to me, you only write
    your functions in AS and create instances with mxml (...ugh).
    personally, i find mxml to be ugly (mainly because it looks like
    html to me), and i'd rather not use it. coming from programming in
    an IDE in Java, it seems like it would be nicer to have something
    similar, all the while having the power and cool features of flash.
    I'm not fully educated in this matter so i understand that i could
    be totally wrong.
    i mean, if i have to code in mxml, i will. i'm a web
    programmer for a living, and if a more experience programmer said
    something like "if you don't code mxml in flex, you'll never get a
    job coding in flex", i would trust the advice, and learn the ugly
    code. :)
    yes, i do have Flash cs3, it's great but it seems like a pain
    to me the way you organize classes.... i've only seen a few
    tutorials, ones that explain how you cannot simply import a custom
    class, you have tell your movie to link to it, put it in the same
    directory, or manually name the package, it's sort of confusing.
    my main point here is that i'm very eager to start building
    apps in straight AS 3.0 instead of using flash cs3 (for some
    projects), and it would be cool to get some help or be pointed in
    the right direction.
    to simplify:
    can i write AS 3.0 and only as 3.0 in flex 2 or 3? how? can
    you link me to a tutorial? any advise?
    thanks!

    Hey William, thanks for the post. It's a great coincidence
    because I'm reading that book as well. I'm about half way through
    it, and I love it. I installed mxmlc on my linux box and am writing
    pure AS 3 apps. I think that's the way to go, though I know it's
    not for everybody.
    My problem with mxml is that it has a weird syntax for
    function calls, and it's not as 'intuitive' for a person like me,
    who came from C++ and Java programming in the past. I like writing
    programs in the C++ and Java style syntax, and since so many other
    languages use a similar syntax, I don't see any reason to learn the
    nuances of mxml, unless I was getting paid to do it. As far as I
    can tell there is no benefit.
    I hate using Flash to write flash apps as well, I feel like
    they become messy and confusing, especially when trying to write an
    OOP application. I only use it if I want to move an object in a
    very specific way and can't do it with the Tween methods.

  • SIMPLE QUESTION: Change background color

    Hello mates, I have a really simple question.
    I want to change the color of my project from (default) black to white.
    Thanks,
    Ben

    Ben,
    I'm still not sure if you are looking to change the PrPro GUI (the display of the interface), or some aspect within your Project. If the "background" is what is seen in your Program Monitor, then creating a Color Matte on Video Track 1 will likely be the answer. You can choose the color that you desire and anything on the upper Video Tracks, that do not occupy the full Frame Size will have that Color Matte as the "background."
    For the GUI, Harm has addressed that, but I do not think that is what you are asking for.
    Good luck,
    Hunt
    PS an attached (use the little "camera" icon in the middle of the editing screen's Toolbar) screen-cap of your Timeline and your Program Monitor might clear things up a bit, in case you have not found the answer already. Just add some text to it in PS along the lines of "this is what I have now, but want to change it to a blue color... "

  • Pretty simple question regarding headphones.

    Hey everybody. I want one of the new shuffles as a secondary iPod, however, I just got a new pair of Bose in-ears and there's no way I'm letting them go to waste. I guess I have a few simple questions anyone who already has a new shuffle can easily answer:
    1. Does playback immediately start upon switching the switch to either shuffle or straight through? and
    2. Can you plug in the apple headphones, adjust the volume to an acceptable level, select a playlist, etc., then switch out to third party headphones to listen?
    As for an adapter, there's no way I'm spending money on accessories for an $80 mp3 player. Sorry Apple...

    WavesOfFury wrote:
    1. Does playback immediately start upon switching the switch to either shuffle or straight through?
    No
    2. Can you plug in the apple headphones, adjust the volume to an acceptable level, select a playlist, etc., then switch out to third party headphones to listen?
    Yes
    Basically, when you unplug the apple headphones, or even turn it off after you've set what you want it'll keep your 'settings' but stop playing.
    When you plug in your own headphones, you just need to switch it off and on again to continue playing where you left off.
    Awkward, but possible. Btw, the new shuffle audio quality and playlist handling is definitely an improvement over the 2nd gen shuffle. Basically the player is better all round.
    It's just the lack of a headphone adapter that lets it down.

  • Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?

    There are many a thousands of people who are producingvideos on completed DVDs. As an amateur videographer using iMovie first nowusing Final Cut pro to produce completed ready to distribute DVDs, I find ithard to believe at the meeting you mentioned anyone with common sense wouldhave explained the scenario above. On an amateur level so many folks have beencreating videos of Weddings, Home Movies, and many different Special Events. Onin particular are sports events. I shoot a sports event like Mix Martial ArtsEvents utilizing several video cameras. Then editing with Final cut Pro andsometimes iMovie. All of my completed videos that have been edited in either ofthese two programs are shared (like hand in glove) with iDVD. Short of steppinginto the commercial world Apple has deleted many people from producing a semiprofessional looking product.
    I do not know if the can be answered here in the format buthere it goes!!
    Simple question. Since apple has extinguished iDVD Are thereany other Software programs that can produce the end product iDVD did? Googlesearches with years of outdated info does not give good references. Withoutlooking to go commercial, the Apple Macintosh Computers built internal Softwareprogram like iDVD is the only program I know of that can help folks on mylevel!!
    It doesn't seem there are any programs that takes off fromwhere iDVD left off. My end products (complete videography from start tofinished printed and burned DVD) needs to have the mapping and control usingthe semi professional look iDVD gave!
    Have any ssuggestions?

    Thank you Klaus 1
    I have 4 latest Macs All have iDVD. The question was not where to get iDVD.
    The question for anyone who knows is: Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?
    I appreciate your input but it realy does not answer the question. iDVD will soon not be able to work with newer versions of Macs as it has been left behind by Apple!
    Once again:
    It doesn't seem there are any programs that takes off from where iDVD left off.
    My end products needs to have the mapping and control using the semi professional look iDVD gave me.
    Imovie cannot do this. More importantly imovie cannot save the project to Video_TS folders like iDVD did.
    Anyone have suggestions?
    My full post is just below:
    There are many a thousands of people who are producing videos on completed DVDs. As an amateur videographer using iMovie first now using Final Cut pro to produce completed ready to distribute DVDs,
    On an amateur level so many folks have been creating videos of Weddings, Home Movies, and many different Special Events. One in particular are sports events. I shoot sports event like Mix Martial Arts Events utilizing several video cameras. Then editing with Final cut Pro and sometimes iMovie. All of my completed videos that have been edited in either of these two programs are shared (like hand in glove) with iDVD. Short of stepping into the commercial world Apple has deleted many people from producing a semi professional looking product.
    I do not know if anyone can this question but here it goes!!
    Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did? Google searches with years of outdated info does not give good references. Without looking to go commercial, the Apple Macintosh Computers built internal Software program like iDVD is the only program I know of that can help folks on my level!!
    It doesn't seem there are any programs that takes off from where iDVD left off. My end products (complete videography from start to finished with printed and burned DVD) needs to have the mapping and the control by using the semi professional look iDVD gave!
    More importantly imovie cannot save the project to Video_TS folders like iDVD did. Something for folks like myself who need this to burn to our multi burning DVD all in one printers!!
    Anyone have suggestions?

  • Can anyone answer a very simple question for me ive heard the apple was giving a free iphone 4 or 4s bumper away is there any truth to that?

    can anyone answer a very simple question for me ive heard the apple was giving away iphone 4 or 4s bumpers is there any truth to that?

    Not any more, no. There was a free bumper program back when the iPhone 4 originally came out. It has long since expired.

  • Current Year and current month?simple question

    How can i get four Digit current Year and two digit current month. So if is march it should get me as 03 and the Year as 2002. Please do help me, is a simple question isn't it ?. Thanks for your earliest response.
    Thank you.

    i have a directory structre of the format
    REPTS2000209/E200209-98000001
    in which 2002 is current YEAR
    09 is current month
    and 9800001 is the code i would submit(list box) from a form
    so what i need is a program that can generate the above path and open that particular PDF file
    so basically E200209-98000001.pdf is the PDF file.
    i am submitting it from JSP page. PLEASE HELP ME how can i program.

  • This might be a simple question.   On those sites that do not differentiate between models when on the internet I.e. Facebook when after your comment and you cannot hit "enter" on an iPad for examp. And speed is slow to connect.  What is = to post?

    This might be a simple question. On those sites that do not differentiate between CRT, laptop, tablet etc. such as an iPad Mini and using the Facebook site fir example when going to post a comment and you do not have a enter button on the IPad and the speed is slow how do you get your comments to post if we do not have a enter button? 
    <Email Edited By Host>

    I don't have facebook so I cannot answer but for your personal security, I have asked the hosts to remove your e-mail address.   It is very unwise to publish this.

  • A simple question on random number generation?

    Hi,
    This is a rather simple question and shows my newbieness quite blatantly!
    I'm trying to generate a random number in a part of a test I have.
    So, I have a little method which looks like this:
    public int getRandomNumber(int number){
            Random random = new Random(number);
            return random.nextInt(number);
        }And in my code I do int random = getRandomNumber(blah)...where blah is always the same number.
    My problem is it always returns the same number. What am I missing here. I was under the impression that nextint(int n) was supposed to generate the number randomly!! Obviously I'm doing something wrong or not using the correct thing. Someone please point out my stupidity and point me in the right direction? Ta

    I think the idea is that Random will generate the same pseudo-random sequence over and over if you don't supply a seed value. (The better to debug with, my dear.) When you're ready to put an app into production, the seed value should be the current system time in milliseconds to guarantee a new sequence with each run.
    Do indeed move Random outside the loop. Think of it like a number factory - instantiate it once and let it pump out the random values for you as needed.

  • A simple Question about % in CR Chart!

    Hi, I have another simple question.
    When i use SQL to storage data and wanna Crystal Report to display the data in chart using %
    which data type should i use?
    float or string?
    and I found when i use 0.12 as 12% in database , It could not display in Crystal Report line chart normally.
    What should I do??
    Please Help!!!
    Thank you VERY MUCH!!!

    If you have the datatype as string from your database then try adding the string field as a summary field in chart and select maximum instead of count and if you have them in number format then you can directly select the percentage in chart.
    Regards,
    Raghavendra

  • Simple question about generate proxy

    Hi guys...
    This is a simple but a truly simple question....
    When trying to create a proxy from our messages interfaces using SPROXY, i'm not able to get the Software component versions that were used from the sld...
    Do I have to export them? Or import them?

    Hi Goncalo,
    Check if it helps...
    Re: SW component version not visible in SPROXY
    Regards
    Anand

  • Simple question:  I want to use iCloud as a back up disk for my documents folder.  How can I do this?  If I cannot do this, why am I paying for access to "the cloud?"

    Simple question:  I want to use iCloud as a back up disk for my documents folder.  How can I do this?  If I cannot do this, why am I paying for access to "the cloud?"

    iCloud does not provide general file storage or backup, so you cannot back up your Documents folder using it. You will need to find a third-party alternative - this page examines some options (some are free):
    http://rfwilmut.net/missing3
    iCloud at basic level, with 5GB is storage, is free: you only pay anything if you want to increase the storage space.

Maybe you are looking for