Simple question: using mainstage as sound module AND run multi tracks live

i want to play live, using my mac book pro, mainstage as a sound module while running several (audio) outputs/tracks at the same time. is this possible and how is it done? i don't want to change to ableton live! thx a bunch everyone!

If doing vocals and latency is a problem, you can also experiment with taking your live (dry) signal direct (if you interface allows this) into your mix, which will be zero latency. Live signal also goes through MainStage to apply effects such as reverb and delay, and you feed the wet only signal to a separate "vocal fx" mix channel.
Of course, you can't apply plug-in based eq and compression to the realtime signal (or your back to the latency problem), you would have to rely on hardware/mixer for that. I have experimented with this method with good results...
Others have reported not being bothered by the amount of vocal latency, but I wonder...

Similar Messages

Simple way to use the Photo Gallery Module and flexslider to create an editable image slider?

I want to offer an image slider that my clients can easily update themselves through the Admin. Ive researched it alot and I know it can be done using web apps but does my cliently seriously need to pay over $400 a year for the webcommerce option just to have an updatable image slider?? I find that unrealistic. Does anyone know how to set this up using the photo gallery module and "flexslider" so clients on the business marketing plan can have access to a simple and clean editable image slider?
Any BC experts that can help would be greatly appreicated!
Thankyou

Not an expert, but I think what you're looking for is a slider that can get its list of photos from an XML file. The Photo Gallery module can produce an XML file.

Using Roland percussion sound module inside Logic 8.

Hello,
I have a Roland td-6v percussion sound module and want the sounds to show up inside logic for use. How do I do that? I have a 002 with two midi cables connected (midi in and out from the Roland module coming into the 002). I have been able to use the kit as a controller for sounds inside logic and also control the kit from logics sequencer out through midi. (I could record drums as Audio but that's not the idea)
Thanks and sorry if my explanation is confusing in any way
Thanks again.

There really isn't any easy way to do this. so i assume you know that MIDI doesn't transfer any "audio" only information note on note off velocity etc. although they talk fine about this stuff logic does not have direst access to the sounds in your roland memory.
To get them "into" logic. you would have to record the roland sounds as audio. you can do this as a track in your song by bouncing, that is recording the audio from the roland to a track. or you can go in and record the sounds individually (not as a beat per se) then chop out the individual hits and load them in to the EXS24 or Ultrabeat as a custom drum kit. then they would be "available" to logic.
There is no way to just load the sounds from your roland (or really any instrument) into logic.
however there is a product that can automate the process of sampling midi instruments and then create custom EXS24 kits. It is made by Redmatica and is called AutoSampler you can check it out at
http://www.redmatica.com/Redmatica/AutoSampler.html
good luck-g

If I use a sound clip in the multi-track editor multiple times; is there a way to reverse the clip w

If I use a sound clip in the multi-track editor multiple times; is there a way to reverse the clip without change all the instances where the clip was used in the same multi-track session?
I'm having to copy the clip rename it as clipreverses.wav then bring it back into audition to use it.
Sony Vagas you can flip the same clip on a different track with a right click and not affect any other copies of that clip.

Not that I'm aware of, no. You can easily make a unique copy of a clip (right-click on it, and you get it already saved for you), and I'd say that having this was more flexible in one way, at least, as you could then time-stretch it if you wanted to, without altering all other instances of it. Not saying that there wouldn't be any point in having a reverse-play option - I can see instances where it might be useful. It's just that it's not exactly difficult to achieve this anyway, which is probably why I don't ever recall a request for it!

Roland TD-12 Sound Module and iPad

I would like to hook up my iPad to my Roland Drums TD-12 sound module. I'd like to be able to use my ipad as a controller as well as download new effects. Please let me know if you have done this and/or where I might find instructions to do this. Thanks!

Mr Bombay wrote:>
I know I need a MIIDI i/face but what else?
nothing besides a mac compatible interface:
http://www.bulletsandbones.com/GB/InterfacesMIDI.html

Can I Use MainStage Effects in Logic (and vice-versa)?

New to Logic.
MainStage is amazing but it's only good if I can use the sounds I've recorded with in Logic and re-produce them live, and then vice-versa. So is there a way to:
1. Export (or use effects directly) from Logic and use in MainStage
2. Export (or use effects directly) from MainStage and use in Logic
3. Are my sounds saved in a folder that I can navigate to from within either application?
I've looked as much as I can in the reference manuals but can't believe the two software programs cannot be integrated without having to set up MainStage on one computer to play live and then record on a second computer. So obviously that said, is there a way to attack this on one laptop/quad for home recording?
Cheers!

Anyone?
I see no point finding brilliant sounds in MainStage and then having to try to emulate them all in Logic (or vice versa). So can either be integrated with one another?
Thanks

Using Attachment Interface in Module and Calling other module conditionaly

Hi Experts,
I am currently working with a module where I need to work with attachments coming with emails.
Can any one please help me , how can I use the different methods of this interface?
My requirement is to read only the content type of the attachment, taking only the content of the attachment.
we have two methods in this interface- getContentType() and getContent() , I think this will serve the purpose. we have another method toString() - will this method return the content of the attachment as a String?
in the below code fragment-
Message msg = (Message)inputModuleData.getPrincipalData();
Payload payload =msg.getDocument();
will return the main document as XMLPayload.
can I use this
Attachment attachment= msg.getDocument();
and use the method as -
String str= attachcment.toString(); ---> will this return the attachment content as String ?
any code fragment for these method in Attachment interface will be helpful.
I need another help- is it possible to call the adapter module in the next sequence from the previous module code conditionally?
e.g- I have written I custom module where I need to restrict the processing of the next module ( e,g- payloadswapbean) conditionally? like- the payloadswapbean will called only after certain verification of the attachment other wise it will not be called.
Request your help
Thanks to all
Sugata B Majumder

Hi All,
I forgot to update one thing, I am using PI 7.0 SP15, and I am interested only dealing with the the Attachment contents, what I just found that Attachment interface is not possible to use in PI 7.0 as it requires the operational mapping level check - Read Attachment.
Is there any way so that the content of attachment can only be get and the content type of the attachment?
I want to use this custom module before the payloadswapbean.
Request your help
Thanks
Sugata B Majumder

HT5312 i could not follow anything, it needs to be clearer, and i all i wanted was to find the answers to my questions, you told me how to make an itunes account. and i'm pretty sure the questions used to be "first teacher" and "favorite teacher"not partn

HELP i just could not figure out how to find the answers to my security questions, and i do believe that the questions used to be "who was your first teacher" and "who was your favorite teacher" but now the second one is "where did you and your partner go on there first trip together, so now i'm wondering if i dont even have the answers anymore! why, have you changed the questions, and i really am having trouble following the help pages. i need help, it wont let me buy any songs or apps, so i've been saving the links and names to songs.

We are fellow users on these forums, you're not talking to Apple or iTunes Support.
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use.

What is use of PD sub module and integration swithces in HR ?

Dear SAP-HR Experts .
(a) What are the integration swithces in HR .
like Integeration with in Sub modules of HR.
(b) what is use of PD sub module ?
Some t-codes of PD module , infotypes or Tables .
Plz it is urgent .
Regards : rajneesh

check
V_T77SO there u can find
i will let u know

Invoking the Forms 9i module and running it from Desktop

Any one Please help me in this...
I want to Execute and Run a form module by clicking a Icon from my desktop as result my form module should be run in the web, from where I can call the other modules,
I tried by putting the following command line syntax in a batch file and went clicking it...
http://my_machine_name:8888/forms90/f90servlet?form=ENTRY_SCREEN.fmxbut it is not working out for me...
Please suggest me out for a Solution... what type of file and the code I have to place in it to execute the form module...
Thanks in advance...

All you have to do is to create a new shortcut on your desktop and enter the corresponding url :
"C:\Program Files\Internet Explorer\IEXPLORE.EXE" http://..../forms90/f90servlet?config=....

Very simple question: using XWS to generate static data

Hi,
I'm testing interop for JWSDP and a soon-to-be-released RSA Security, Inc. product that will also provide WSS as well as XML signatures, XML encryption, ...
I have already used JWSDP -- xmldsig -- to generate a bunch of XML docs that were signed using JWSDP (all varieties of KeyInfo, signing algos, ...).
I need to do something similar for WSS -- using xws-security.
Do I need a Web container in order to be able to do this? (Again, recalling that all I want to do is generate thousands of encrypted, signed, encrypted & signed, signed & encrypted SOAP messages (using UsernameTokens, X509Tokens, ...))
Do you have any examples that might save me some time?
I have looked through all of the examples in the "interop" and "simple" subdirs of the "samples" subdir of "xws-security" and most of these presume that there's some RPC going on, which doesn't really fit the model of what I'm trying to do here. Got any ideas? Even basic ones? Even big ones?
TIA.
Liz

I've kinda answered my own question in part:
SecurableSoapMessage ssm = new SecurableSoapMessage(soapMessage);
ssm.setFilterParameter(FilterParameterConstants.BINARY_SEC_TOKEN,new X509SecurityToken(ssm.getEnvelope().getOwnerDocument(),cert));
ExportCertificateTokenFilter estf = new ExportCertificateTokenFilter();
estf.process(ssm);
ExportSignatureFilter esf = new ExportSignatureFilter(new DirectReferenceStrategy(cert));
esf.process(ssm);
that transforms the soap message, adding the wsse xml, then I try to sign it:
SignFilter sf = new SignFilter(new X509IssuerSerialStrategy(cert));
sf.process(ssm);
and this fails saying I don't have a privatekey, which makes sense. I need to create a DefaultSecurityEnvironmentImpl probably, define the key in there and then attach that to the SecurableSoapMessage? The problem is, I have the cert and privake key stored on files, how do I go about loading that into the SecurityEnvironment? Would this SecurityEnvironment handle cert chain validation then, since it can be constructed with a trusted keystore?

A simple question: Using the user-folders differently

Hello,
I'm still getting started with my mac, that's why I have a pretty basic question:
There are these user-folders on every mac: Documents, Music, Pictures etc.
But since I sort my photos and videos by date, I often have pictures and videos in one single folder and don't want to seperate them in these user-folders pictures and movies.
That's why I'd like to create a new folder next to Documents, Music... called "Photo_Video" (or something like that) where I can put all my photos and videos in.
So, my first (stupid) question: Is it ok to create a new folder in /Users/NAME/_____ ? I'm asking this because the existing folders seem to be kind of special (system folders?). Sorry about this, but I want to get everything right.
My second question: Is there a downside of NOT using "Movies" and "Pictures" for my media? I've heard somewhere that these folders are in some way protected against external usage.
Thank you!
-Lemon17.

Yes, you can create folders inside your Home. The folders there are not terribly special, but the Finder does treat them as such by putting that badge on the folders.
If you have multiple users and want to keep the folders private, you'll need to change the user permissions on the folders you create. When you create a new folder, it inherits the permissions of the enclosing folder. Your Home is set to allow other users to see directly inside so that they can see your Public folder and so the Web server can see into the Sites folder. Because of that, the new folder you create will allow others to see inside of it.
To change the permissions, select the new Folder and Get Info on it. The info window will open and the permissions are at the bottom. The list of permissions will have you as the owner and you will have read/write access. It will also have a group (I think Staff), and Everyone. Select any Groups (icon with two silhouettes) and delete them (- button). For Everyone, set it to No Access. If you are the only user and you don't share out folders over the network, then it isn't likely necessary to change the permissions.
I can't think of a downside of using other folders. The potential downside of not using iPhoto is you won't have the media browser to select photos from. But, that's not a really big deal if you can easily identify your photos in the file structure.

Simple Question about BW reports p&l and balance sheet

I haev two reports Balance sheet and P&L both have the same fields AS below, i want to know what is the key field which i can make the variable for user to display balance sheet or P&L is that 0GLACCEXT financial statement can do that.Any hints will also be appreciated
Account Number
Company code
Business area
Joint Venture
Controlling area
Fiscal year/period
Currency
Transaction Type
Trading partner
Profit Center
Cost Center
Cost Element
Functional Area
Key Figures
Financial Statement
Account Segment
Chart of accounts
Company code
Currency Type
Comparative Fiscal year/ period
Fiscal Year Variant
Fiscal year/ period
Version
thanks
Regards
Soniya Kapoor

Can u PLEASE clarify if 0GL_ACCT HAS two nav attribute which can be used as filter P&L Account and Balance sheet Account to distingush the between the p&l and BAl sheet
but now user want one field like "psbl" which will write on report either pl or bs
please tell how to make the field as free characteristic so that it will pop as pl or bs once user click on it .i will reward all points after this small help
thanks
soniya

Using Laptop to time sprints and running events

I would like to use a computer to assist in timing and keeping track of 15 soccer players that I coach. The timing accuracy need only by one tenth of a second. I'm not looking for anything fancy, just a simple method for the kids to time themselves as they practice each day.
Can anyone help me with a reference or two?
thanks

I guess I should provide more info to make the question more clear. I would like to time sprints (never more than one lap). The key would be some type of hardware accessory that would turn on the stopwatch at the 'start' and some time of switch to stop the stopwatch at the 'finish'. That way the boy/girl could time themselves. That's my goal. To allow the kids to time themselves each day at practice when they do they 40 yard sprint. I was thinking of a switch under their foot that activates when they step/lift their foot. Another alternative would be a light beam that "switches" when the beam is broken.
Any ideas?

Can you write simple Java code in a UNIX function and run it? See example....

Hi,
I'm new to Java and I have a question.
Is there any possible way a simple script like the below would work in a UNIX function called from a shell script. I know you're not supposed to do this but can you?
Thanks in advance,
javatst() {
$JAVA_HOME/bin/java <<- _java
public class HelloWorld {
public static void main(String[] args) {
System.out.println("Hello, World");
_java
javatst

2894431 wrote:
You can run a java class from a shell script like below:
#!/bin/sh
exec /usr/bin/java -DsysParam1="var1_val" -DsysParam2="var2_val" -cp jar1:jar2:jar3 /home/unixUserName/javaClasses/Test.java
exit 0
No!
This is neither a valid answer to the OPs question (since your script does not create the content of Test.java) nor working.
The java executable can only run *.class files which contain byte code of the intermediate language generated by the javac executable.
Your suggestion leads to a ClassNotFound exception.
bye
TPD

Simple question: using mainstage as sound module AND run multi tracks live

Similar Messages

Maybe you are looking for