Simple report that extracts marketing attributes for contact persons

HI
I want to extract the marketing attributes for contact person and to have certian output fields ,
Can anyone help by finding an existing report that i may make some changes in it.
Thanks ,

Similar Messages

Report for initial fill of marketing attributes for contact persons

Hello,
i have an excel document with contact persons and marketing attributes.
What way do you recommend to bring this attributes into SAP CRM?
The contact persons are already in SAP CRM.
Thank you
Best regards
Manfred

Hi Manfred - ELM, is what we use to update contacts for all information, including marketing attributes.
If you don't have the contact in CRM...Step 1 - From the file that you have, just map the contact details and ELM the file to create contacts. Step 2 - You have to add the contact IDs to the file now and this time create a mapping format to update the contact and marketing attributes.
In the mapping format that you would create, marketing attributes can be assigned from the file to be ELM'ed.
Thanks
Nikhil

Report accessible in CRM PCUI for marketing attributes for contacts

I am trying to create a report accessible in CRM PCUI home page for marketing attributes for contacts(info from CRM, not R3). Does anyone know the steps to get this done please?

Hi Abdul,
Can you tell me how did you do this. I have a similar requirement in PCUI where I need to have a two level report in PCUI.
Would request to treat this as very urgent.
Regards
Priyanka

Problem in Updating marketing attributes for Contact

Hi,
I am trying to update marketing attributes for contact and Account while Creating lead. For this I implemented ORDER_SAVE (Chek before save).
For account, the marketing attributes are getting updated fine. But, for Contact they are not getting updated. For both I am using the same code. But, I dont understand, why.
Please, let me know why this is happening.
Here is the code i used.
The internal table li_imp_seltab contains Marketing attributs.Its being filled properly. No problem with Internal table data.
For contact----
>
If not v_contact is initial.
IF lo_contact_head->is_changeable( ) = abap_true.
Update or create the marketing attribute if it does not exist and set the value of the attribute to 'Prospect'
          CALL FUNCTION 'CRM_MKTBP_CHANGE_BP'
            EXPORTING
              iv_profile_template_id = k_template_id
              iv_bp_guid             = l_contact_guid
              iv_xdescr              = abap_false
              iv_fcode               = abap_false
              iv_msa                 = abap_false
              iv_commit              = abap_true
              iv_partner             = l_contact_no
              iv_convert_values      = abap_true
            TABLES
              it_imp_seltab          = li_imp_seltab
              et_return              = li_return.
Modify core and save so that the updations would reflect immediately in Web UI
          lo_core->modify( ).
          lo_tx = lo_contact_head->get_transaction( ).
          IF lo_tx IS BOUND.
            IF lo_tx->save( ) = 'X'.
              lo_tx->commit( ).
            ENDIF.
          ENDIF.
        ENDIF.
For Account -
>
if not v_ac is initial.
Check if the entity is changeable.
        IF lo_account_head->is_changeable( ) = abap_true.
Update or create the marketing attribute if it does not exist and set the value of the attribute to 'Prospect'
          CALL FUNCTION 'CRM_MKTBP_CHANGE_BP'
            EXPORTING
              iv_profile_template_id = k_template_id
              iv_bp_guid             = l_account_guid
              iv_xdescr              = abap_false
              iv_fcode               = 'C'
              iv_msa                 = abap_true
              iv_commit              = abap_true
              iv_partner             = l_account_no
              iv_convert_values      = abap_true
            TABLES
              it_imp_seltab          = li_imp_seltab
              et_return              = li_return.
Modify core and save so that the updations would reflect immediately in Web UI
          lo_core->modify( ).
          lo_tx = lo_account_head->get_transaction( ).
          IF lo_tx IS BOUND.
            IF lo_tx->save( ) = 'X'.
              lo_tx->commit( ).
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
Please
Thanks,
Sandeep

Hi Sandeep,
You can use 'CRM_MKTBP_UPDATE_ATTR_BP' FM to update the marketing attributes of the BP.
Regards,
Lakshmi.Y

Marketing Attributes for account and Contact

Hi,
I am looking at Marketing Attributes of an Account. They are fine.
And I am looking at Marketing attributes of an Contact for this account. But these values are different from Account Marketing Attributes.
They are not same...can you please let me know..when they will bcome same (for Account and his contact).
And when I create lead(campaign)...will these attributes changes for Account and Contact?
Please let me know...as I am very new to CRM Marketing.
Thanks,
Sandeep

Hi,
If the marketing attribute set is created with assignment to bith Accounts and Contacts.. the same would be visible through out.
If u want different set of attributes for contacts and accounts, define multiple marketing attributes and select the checkbox for availability in either contacts or accounts and not both.

Urgent: How to Remove assignment of a marketing attribute for an BP

Hi Guys,
In my project we are maintaining two marketing attributes for all the business partners.
But there is a need now based on some condition we want to remove one of the assignment for the BP (I.e which ever BP matching the condition)..
I dont want to remove this manually using the transaction code..
Is there any function module to remove the assignment of the marketing attribute for the BP.
Would appreciate an early reply...Since it is very urgent...
Regards,
Sundar

HI Sundar you should follow the following steps.
1. Create a target group in the segment builder selecting all the business partners that meet your criteria.
2. Go to the Expert tools (transaction CRMD_MKT_TOOLS)
3. Select the Deletion of an Attribute for All BP Assignments to a Target Group option.
4. enter in the name of your target group, the attribute set and attribute you want to remove.
Nima

SAP CRM MObility Activity Survey to create Marketing Attributes for a BP

ATtrHi Gurus ,
I have to create an Activity from IPAD ( CRM Mobility ) which will create a survey response,and the survey responses have to be captured and then create Marketing Attributes for the BP related to the Activity. I am not able to use the Callback Function given to IPAD Application.
So my Approach so far has been :
implement a badi that gets trigerred at Survey Response submission.
in that call function module crm_svy_activity_pai.(Made a Z-copy of this to enforce COMMIT WORK )
I am not able to pass the parameter lr_values for FM: CRM_SVY_ACTIVITY_PAI
These are the 2 links that has been useful so far . Kindly add to this if possible.
Regds
Oindrila

Hi Jacques,
Once you click on Marketing in Web UI you will find "Marketing Attribute" in the Work Area.Click on that.
You need to give ID No. and Attribute Set name.
You need to mark Persons and Organisation checked also.
Below that you will find 2 blocks " Attributes" and "Value"
Under Attribute gve your Attributes Names you want to define ( e.g. Age,Salary or any client defined..) then select the Format ( Numeric or Chracter etc...)
Once you have filled in all the Attributes you click on one attribute and below you need to fill the Values ( e.g 20-30 yrs etc...) . If you want to make that value a default one you can select default check box against each value.
That way for each attributes you can define values. Hope this would help you.
Regards...
Edited by: akscrm akscrm on Sep 3, 2008 2:19 PM

Standard report that extract material weight

Dear,
do you know if exist in SAP a standard report that extracts information about weight from the material master data.
I don't need something particular, only extract weight information for a material.
We have not WM and MDM.
thanks for your help
regards
matteo

there is no standard report available.
you can do it with QuickViewer, Query , or even with SE16.
Table that holds the info is MARM.

Reg: CRM Marketing attributes for CRM 7.0

Hi Gurus,
We are using function module CRM_MKTBP_CHANGE_BP to change marketing attributes for a business partner in which the marketing attributes are coming from another interface.
We get the marketing attributes created all the time, but the problem is when theres is a change in marketing attributes, these changes are also reflected, but the changed by and time stamp is not changed, though we pass it explicitly via the internal table IT_IMP_SELTAB when passing the fields CHANGED_AT and CHANGED_BY.
Requesting if anyone knows another FM or BAPI or OSS noted available for this as this particular FM is not released yet too.

Hi ,
Check that the Flag Run in the table CRM_MKTBP_CHECK for function module CRM_MKTBP_UPDATE_AUSP_EX_DB is set to X. This is for recording the history for any changes in the attributes. If not then set this flag to X. After that just change the value of one of the attributes and check the 'CHANGED AT' and 'CHANGED BY' fields for that attibute.
Hope this helps.
Regards,
Gervase

On win 7 64 bit mozilla or IE 10 I get the following message This installation package could net be opened verify that the package exist and that you can access for contact the application vendor to verify this is a valid windows installer package I trie

I get this following message when installing the latest itunes on mozilla or IE10 was working on this machine before crash and reinstalled for HP disc I tried at leat 15 times firewall off /on microsoft essentials on/off on windows 7 64 bit see message
This installation package could net be opened verify thatthe package exist and that you can access for contact the application vendor to verify this is a valid windows installer package

If you are not already doing so, install from an Administrator account.
If you haven't already done so, download the iTunes Installer from:
http://www.apple.com/itunes/download/
Then right click on the installer and select "Run as Administrator." (Even though you are using an admin account).
If that doesn't work, try creating a new administrator account and installing from there.

How to deactivate the marketting attributes for BP in CRM

Hi,
how to deactivate the marketting attributes for BP in CRM
I can add and maintain the same using tcode crmd_prof_char
But how do I deactivate.
Points will be rewarded
Thanks

.

Marketing attributes for a business partner

Hi,
how can I input marketing attributes for a business partner with a BAPI?
Or can I use BATCH-INPUT (the transactions is "BP")?
Thanks and best regards.

Hi JoJo,
I don't know about LSMW. But I have done something similar in a program by calling the following function module in a loop for each of the business partner:
CALL FUNCTION 'CRM_MKTBP_CHANGE_BP'
      EXPORTING
        IV_PROFILE_TEMPLATE_ID = lv_attribute
        IV_PARTNER             = lv_partner
      TABLES
        IT_IMP_SELTAB          = lt_attr
        ET_RETURN              = et_return.
Here you can provide the attribute set in lv_attribute
and business partner in lv_partner. lt_attr contains all the attributes (name and value).
Example:
    ls_attr-atname = 'Z_CUST_TEAM_ASSGN'.
    ls_attr-atwrt = 'Test Team'.
    APPEND ls_attr to lt_attr.
Hope this helps.
Regards,
Chandrika

URGENT: How to remove the assignment of marketing attributes for an BP

Hi Guys,
In my project we are maintaining two marketing attributes for all the business partners.
But there is a need now based on some condition we want to remove one of the assignment for the BP (I.e which ever BP matching certain condition written in my BP upload program)..
I dont want to remove this manually using the transaction codes or the segment builder
Is there any function module to remove the assignment of the marketing attribute for the BP which i can use in my upload program
Would appreciate an early reply since it is very urgent...
Regards,
Sundar

Hi Sundar,
Most Easier approach is to code a BDC based on trasaction : CRMD_PROF_BP. in the search field pass BP ID, you will get the BP attributes and you can delete it their and then.
Save.
Data is back in Database.
All will happen in BDC in background.
Else you can use
FM 'CRMT_MKTBP_WRK' to delete the assignments.
This is the basic FM called to delete marketing attributes assignment.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Is there any table or report that available in SAP for any PR/STR

HI All,
Is there any table or report that available in SAP for any PR/STR that are remain opened after S/O canceled.
Please advice at the earliest.
Thanks
Chandru

Chandru,
Of course. The standard MD06 transaction will display ALL MRP generated exception messages, and will take you to the individual material to allow you to determine how you wish to respond to it.
So, MD06>enter the plant. Optionally, enter the controller if you wish to limit the results by planner.
If you are interested in Sales order cancellations, then these exceptions would be categorized by SAP as belonging to the "exceptions during Scheduling" or "exceptions during availability" groups. On the Exceptions group tab, select these two items (6&7), deselect the rest. Enter.
You are now presented with a list of all materials that contain one or more of these exceptions. From the menu bar at the top, select Edit>Find. If you get a 'statistics' popup, click through. Select the 'Find Exceptions' tab.
Message 26 "excess stock in individual segment" means that in a MTO environment, you have more supply than demand against given order/items (as you would have if a cust. cancelled his MTO order). Select this message.
Message 20 "Cancel Process" means that you have a supply element that has NO requirements (as you would have if a cust. cancelled his MTS order). Select this messaege.
Message 15 " Postpone process" means that you have supply elements that are scheduled to be received earlier that necessary (as you might have if a Cust cancelled his MTS order). Optionally select this message.
Clik the green check. You will now notice that certain rows on the listing are highlighted. These are the ones that contain your problem children. Hit the "glasses selected MRP list" button.
This takes you to the first MD05 of the highlighted items. Review the problem. Decide what to do: Cancel a supply element? Push out a supply element? Leave it alone? Call customer service to discuss which order was cancelled and why? etc etc etc...
Once you are done with the first material, clik on the 'next material' icon or hit Ctrl-F2. Repeat. Continue till all materials have been evaluated and resolved.
This works for any other MRP message as well.
Regards,
DB49

How to create an marketing attribute for the busines partner

hi guys,
can any body help.
how to assign/create the marketing attribute set to the business partner.
is there any function module which to create the marketing attribute for the business partner by passing the BP GUID.
if any body is having an sample code can u please post it.
regards
viswag

Hi Viswa,
In CRM 4.0, marketing attributes set can be created at T-code [CRMD_PROF_TEMPL]
The created attribue set can be assigned to BP at T-code [CRMD_PROF_BP]
The other way you can open the BP, in marketing at marketing attributes tab your can assign the created attribute set.
regards
satish kumar
*-Reward points if found helpful.

Simple report that extracts marketing attributes for contact persons

Similar Messages

Maybe you are looking for