Simple short cuts not working in CC?

Does anyone know why simple commands are not working in Illustrator CC (Copy, Paste, Undo) This is such an irritating problem as these short cuts are so frequently used. My cloud software is up-to-date. Having upgraded my software I would prefer not to have us CS5 to combat this problem.

Hi Vaibhav,,
Thankx for the prompt help!!
I'm using Submit to SAP button only and I do have xACF installed on my local m/c. I'm able to use buttons and validations on the form but I'm not able to get the values in my WDynpro ABAP Appl. For Eg. : and internal table is bound to a table UI in adobe iForm , I'm able to add row (using formcalc/JScript eventing in Adobe) but I'm not able to get the changed internal table in my WDynpro ABAP application after submit button is pressed.
Any help will be highly appreciated.
Regds,
Aryan

Similar Messages

Keyboard short cut not working in iOS 6 on iPhone

I just tried adding a new keyboard short cut on my iPhone 4S with iOS 6 and the short cut will not stay on the phone. I can enter it and it is added to the list of short cuts until I go back one screen, then the shor cut disappears. This worked fine under iOS 5 and still works fine on my iOS5 iPod Touch. Any ideas how to fix this?
Thanks
Fred

I have an iPhone 4 with current iOS.
I've noticed this over the past few months. I always notice it on the FB app. My short cuts stop working. I will check email or note. I figured restarting the phone would fix it.
Here's the thing. Obviously I use FB a lot, but this short cut issues never happens in text messages, Whatsapp, or email. Always with FB.
In fact I noticed that I get sluggish typing performance typing using the FB app whether I use the keyboard short cuts or not.
Just wondering if this common among iPhone 4 users.

Safari Screen Short Cuts not working in OS4

Since updating to OS4 on my 3Gs my safari short cuts that I added to my home screen won't open. I tried adding a new one and that won't open either. Any suggestions on how to resolve this? I like having them at my finger tips.

I have an iPhone 4 with current iOS.
I've noticed this over the past few months. I always notice it on the FB app. My short cuts stop working. I will check email or note. I figured restarting the phone would fix it.
Here's the thing. Obviously I use FB a lot, but this short cut issues never happens in text messages, Whatsapp, or email. Always with FB.
In fact I noticed that I get sluggish typing performance typing using the FB app whether I use the keyboard short cuts or not.
Just wondering if this common among iPhone 4 users.

Type size short cut not working in CS6

Hello everyone.
I've recently upgraded to CS6 and the up and down arrows in the type size box are greyed out and unclickable.
Does anybody know why this is so?
Many thanks!

I have an iPhone 4 with current iOS.
I've noticed this over the past few months. I always notice it on the FB app. My short cuts stop working. I will check email or note. I figured restarting the phone would fix it.
Here's the thing. Obviously I use FB a lot, but this short cut issues never happens in text messages, Whatsapp, or email. Always with FB.
In fact I noticed that I get sluggish typing performance typing using the FB app whether I use the keyboard short cuts or not.
Just wondering if this common among iPhone 4 users.

Short cuts not work

all of a sudden none of my short cuts will work even if I delete them and try to add a new short cut .All the icons are white and blank.I have windows 8.

Hello @hatescreennames,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your shortcuts on your computer running Windows 8 have stopped working. I recommend that you use the HP Support document: Using Microsoft System Restore (Windows 8) to restore your computer back to a point in time where your shortcuts did work correctly. This will fix any settings that may have been altered in your computer to cause the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Safari in reader copy short cut not working

When in reader mode, the short cut for copy does not work, why? If pressed the singal tone for wrong sounds.
Anyone else experinting this problem?
mac os lion, upgrade from Lion Safari 5.1

I'm also having this problem - don't know why unfortunately. It looks like most of the 'edit' menu is now greyed out when Reader is activated - very annoying. Fortunately you can still copy by using ctrl-click/right-click.

Firefox short cuts not working

hi,
for some reason when i am running mozilla firefox the command+t doesnt work when trying to open a new tab. but all of the other short cuts do. anyone else have this problem?

You may want to check the preferences or trash the preference list.

Screen shot short cut not working

I'm using Mountain Lion 10.8.4 and have lost the screen shot keyboard shortcut (Command-Shift-4). I use this quite a bit so this is a big inconvenience. Note that the other screen capture shortcuts aren't working as well. I have tried to delete my Finder prefrence file in the Library and re-start, but the problem persists. Keyboard shortcuts are enabled in System Preferences, so what gives. Anyone else seen this problem, any fixes?
Thanks,

The keyboard shortcuts for screen shots works fine with my 10.8.4 (build 12E55). You may need to install again using the Install OS X Mountain Lion. Until you get it fixed try this as a workaround
http://projects.digitalwaters.net/index.php?q=instantshot

Illustrator Short Commands Not Working

Hi Team,
My illustrator CS6 short commands have stopped working.
Any time I try to use any CMD + Key, illustrator will not react.
This has been on going for a few months, I have tried resetting preferences but nothing has changed.
If someone could please help.
Thanks,
Brandon

Hi Jacob,
I have tried resetting preferences and few other options.
Anytime I press the CMD key the option at the bottom just changes from selection to direct selection, if that helps.
Should I uninstall and reinstall illustrator?
I no longer have my access key.
Thanks,
Brandon
Date: Wed, 8 Jan 2014 15:39:58 -0800
From: [email protected]
To: [email protected]
Subject: Illustrator Short Commands Not Working
    Re: Illustrator Short Commands Not Working
    created by Jacob Bugge in Illustrator - View the full discussion
THS,
You may try the following (you have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press CtrlAltShift/CmdOptionShift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5994475#5994475
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5994475#5994475
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5994475#5994475. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

PCI Simple Communications Controller not working

PCI Simple Communications Controller not working on hp pavilliong6-1003tx

Hi
Download, save & install --
Windows 7:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94322-2&cc=in&dlc=en&lc=en&...
Restart system after installation.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

I downloaded Windows 10 and my Simple Pass is not working.

I downloaded Windows 10 and now my Simple Pass is not working. I get a message that HP Connected Remote isn't responding and to be sure the service is running. I went under programs and repaired it but I still get the same message. Thanks in advance for your help. Please don't make it too complicated.

DUPLICATE POST
Please see: https://discussions.apple.com/thread/5513386?tstart=0

Simple button script not working

I am using AS2 and need help figuring out why this simple button script is not working:
stop();
buttonWS1.onRelease = function(){
                    gotoAndStop("Stage1and2_Boss",4);
buttonWS2.onRelease = function(){
                    nextFrame();
//end
My buttons are the square letter-puzzles below. They are images that I converted to "symbols" (specifically, buttons). I put their names as above (buttonWS1, buttonWS2, etc.) in the "instance names" boxes.
I have no idea what is going on. Please help!

Hi -
1. Yes, buttonWS2 is the instance name
2. The only code attached to it is the code I pasted above.
3. onRelease does not execute because my trace statement does not appear in the output
Here is the modified code for buttonWS2:
buttonWS2.onRelease = function(){
                    trace("clicked!");
                    nextFrame();
Question: It shouldn't matter if I have commented-out code within that set of codes should it?:
buttonWS2.onRelease = function(){
          //if (puzzleschosenarray[0] == 2 || puzzleschosenarray[1] == 2) {
          // cannot be chosen -- make button non-functional
          //else{
                    //puzzleschosenarray[roundnumber-1] = 2;
                    trace("clicked!");
                    nextFrame();

New Mac - list keyboard short cuts not include "page down" or down a line or down 2-3 lines. Only short cut for top of page and end of page. Do not have Home or End button on Mac keyboard

On your tutorial list of keyboard short cuts, there is not a choice to "scroll" down the firefox web page by one line or 2-3 lines at a time.

On your tutorial list of keyboard short cuts, there is not a choice to "scroll" down the firefox web page by one line or 2-3 lines at a time.

Data Binding: Simple code does not work.

hi... the following simple code is used to display the ename field for a record selected in scott.emp on the console. the code is placed in an event handler. it is as follows:
DCBindingContainer bindings = ctx.getBindingContainer();
DCControlBinding binding = bindings.findCtrlBinding("ename");
String Name = (binding != null) ? binding.toString() : "";
System.out.println(Name);
is the code above correct????
if so, why it does not work???
thanks for every help in advance & best regards.

Hi,
please check the UIModel.xml file for the page if the binding name is "name". The code you have is the same code we published in our QBE workshop and it works there. The only difference is the name of the control binding. So please check if the binding name exists. (e.g. it could be ename1 instead of ename)
Frank

InDesign DPS: Simple animation does not work in folio?

I'm building a simple recipe app using InDesign CS6, using the Digital Publishing tools.
On one page I applied an animation, "fly in from bottom" to an object.
When I eventually build the folio and view it on my ipad with the Adobe Content Viewer, the animation does not work on that page.
I've watched a couple tutorials on how to use the animation tools, how to set the path, etc. but none of them mention any other steps for getting the animation to work once you build the folio.
Am I missing something?
Thanks!
Bruce

Okay, I'm gonna try helping out on this.... I don't think layers have any effect on this, or at least I haven't noticed they do, the just help keep you organized and maybe for arrangment...
So....
You can just lock the background, it isn't involved, it is just the background.
1. Make your button to open/start the sequence and make your finished state and an empty box. In this case the button the button is just a text frame. The finished state is a shape, text frame and two lines grouped (to make an "x" for the close button). In your case it will be your image sequence and the button to close it. Have all the elements of the finished state grouped.
2. Select both groups. In the object states panel, hit the new button. you should now have a multistate object with two states. One empty state and one state with your sequence, etc..
3. Now select your open button. In the button panel, choose the add action button "+" and choose Got to State (or go to next state) and make sure the object is the multistate object you just created. For the state, choose the state with your sequence.
4. Now select your multistate object. In the object states panel choose the state with your image sequence and close button. Select your close button. Go to the buttons panel and add an action to go back to the empty state.
Test it out, it should work fine now. I don't have an image sequence handy, but you may have to mess with the autoplay settings, etc. but it should work just fine.
Notes of interest: As buttons display only as raster on an iPad, I find it best to make a clear button on top of the button graphic. That way the button can be vector. and the clear box becomes raster.
I really, really reccomend watching some of the videos on Adobe TV, they explain and review a bunch of this. Also, there is an app called DPS Tips App by Bob Bringhurst for free on the Apple Store, he explains all the goodies quite well. You can also use Wallaby to convert indesign animation to flash and then HTML5, but that gets more complicated and it can also have a load delay. Good Luck!

Simple short cuts not working in CC?

Similar Messages

Maybe you are looking for