Simple solution for Apple re: the ipod hearing damage issue;-)

All those stories on pods damaging hearing
http://www.cbsnews.com/stories/2006/03/14/health/main1403418.shtml
First you have to be an idiot to turn it way way up; but the simple solution Apple can easily do is to make the volume control level bar turn red when it gets to a possibly damaging level for those folks who can't figure it out themselves...;-) That could be a simple update to add some color.....
[Apple can send me adequate compensation for my brilliant suggestion, I'd suggest a 40gig ipod;-)]

Don't tell us, tell Apple. : )
http://www.apple.com/feedback/ipod.html

Similar Messages

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

I have my iPod touch 5g and the home button is stuck , it still works but its stuck so I have to push hard for it to work, I still have my warranty , will apple replace the iPod ?

I have my iPod touch 5g and the home button is stuck , it still works but its stuck so I have to push hard for it to work, I still have my warranty , will apple replace the iPod ?

Make an appointment at the Genius Bar of an Apple store. If the iPod is defective and not abused Apple will exchange it at no cost
Apple Retail Store - Genius Bar

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

The software required for communicating with the ipod is not installed corr

I just purchased a 60 gb ipod about 3 days ago and have been trying to sync it with itunes since. i have synced the ipod with itunes on two other computers but when i try to connect it to my itunes the error message "the software required for communicating with the ipod is not installed correctly" message always comes up. i have done almost everything possible including removing itunes and reinstalling it several times. if anyone can help me...please feel free
thanks

Here you go, Please read the whole topic. I'am sure this will help you:
http://docs.info.apple.com/article.html?artnum=93716

'the software required for communicating with the iPod is not installed correctly. HELP.

everytime i try to update my ipod nano, i get an error message saying: 'the software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPods software'
i have tried reinstalling my itunes but i am still getting this message.
what do i do?!

When you reinstalled, did you just uninstall iTunes, then download it from apple.com/itunes/download?

I connected my iPod to my PC and got a message 'The software for communicating with the iPod is not installed correctly.

I connected my iPod to my PC and received a message box that read "The software for communicating with the iPod is not installed correctly. Please reinstall the iPod's software." Not sure what I need to do. I did uninstall all of my iTunes and related software components and then reinstalled the latest version of iTunes but that did not correct the problem and I now can't access my iTunes library at all.

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

HT3529 i cant add new mail fir I message as every time i add and tyep pass for Apple ID the email still not add to be reached by i message

i cant add new mail fir I message as every time i add and tyep pass for Apple ID the email still not add to be reached by i message.
Pls i need to validate my mail adress [email protected] to send and recieve Imessage from my iphone.
Islam fouad
+966554948283

i cant activate Imessage in my iPhone as every time i write my Appel ID and the Password the message appear the User id or password incorrect but 100% sure that its correct.
Pls feed me back

Apple send the iPod 4 gen the ios7 update so you could prove to us it can't handle it

Apple send the iPod 4 gen the ios7 update so you could prove to us it can't handle it

That is a nonsensical request. If it could be installed then that would not prove that it could not be installed.
Ry-ry.c wrote:
Apple send the iPod 4 gen the ios7 update so you could prove to us it can't handle it

Are there any solutions for Apple Studio display connectivity to a new Air?

Are there any solutions for Apple Studio display connectivity to a new Air?

Again.. I have an Apple Studio Display (17", LCD)
and want to run it on a new MacBook Air.
Specifications at:
http://support.apple.com/kb/SP110
Any solutions or advise?

My ipad has been connecting to internet/email quite happily until the last few days, it just seems to be searching for my network, the ipod has picked this up. Help

My ipad has been connecting to internet/email quite happily until the last few days, it just seems to be searching for my network, the ipod has picked this up. Help
John

Thanks James
This has solved the problem. What I can't get my head roud is the ipod worked fine but the ipad didn't? any way thanks again.
John

Hi , my sister got really mad and she banged her iPod touch 5th generation on a table and she banged it so hard that the screen didn't crack but inside the the iPod is damage as in like colors are popping out and the screen doesn't work, can i fixed this?

Hi , my sister got really mad and she banged her iPod touch 5th generation on a table and she banged it so hard that the screen didn't crack but inside the the iPod is damage as in like colors are popping out and the screen doesn't work, can i fixed this?

Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

One solution for Apple TV losing connection to its iTunes Library

In 2012 I bought an Apple TV3 to let me use the AirPlay features of my New iPad with my HD TV. All worked fine and still does. Later in 2012 I subscribed to Netflix and enjoyed streaming movies to my HD TV via the Apple TV. Having had such a good experience with it so far I bought another for our bedroom TV and another for a relative, hoping they would have the same great experience with it.
Both of my Apple TV units at my house have worked flawlessly since installing them. We can start watching a Netflix movie downstairs then go upstairs and carry on where the movie left off.
At my relative's house the experience was not so flawless and has resulted in about 2 months of frustration but happily their AppleTV3 is now also working as expected. It has been quite a journey to get to this point and had a surprising solution.
I am the 'go-to' person in my family for these things so I installed the Apple TV for my relative.
My relative has a Windows XP (SP3) PC running the latest iTunes (11.0.2), a BTHomeHub 2 router, connected by WiFi to the Apple TV. The PC was connected by ethernet cable to the router. I installed the Apple TV, set up the hdmi connection to the HD TV, connected it to the WiFi network, upgraded to the latest iTunes on the PC, added the Apple ID for Home Sharing to iTunes and the Apple TV and could connect to the iTunes library on the PC, all good so far. I could play video or music or podcast or view photos from the iTunes library on the PC but after a short time (a few minutes or so), if I tried to play a different video or music track the I would get the familiar spinning icon and the Apple TV would not play the media file. Often the Apple TV would still show the contents of the iTunes library but would not play anything from it. When it was in this state it was still possible to play iTunes Trailers or Purchased content or a Youtube video or display photos from my library. This proved it was still connected to the internet and to some extent my library on the PC because it could display photos.
Initially I thought it was a WiFi problem as that was how the Apple TV was connected to the router. So as I already had a Powerline ethernet link running from the router to the TV for the Humax Freeview box for the BBC iPlayer, I ordered a small network switch to share the Powerline ethernet cable with the Apple TV. However the same drooping connection problems were apparent. I tried changing the QoS settings on the Powerline link, tried to prioritise TCP or UDP or both , but no improvement. I decided to abandon the Powerline link in case it was 'too slow', perhaps that was the issue.
I tried one of the Apple TV units from my house, where they were working fine and I got the same problem, at my relative's house it behaved like their unit, it would connect play a movie (all the way through if we let it) but after a few minutes if trying to play something else it would not play anything further. I tried their Apple TV at my house and it worked there, so the unit was not at fault.
At various times while troubleshooting these problems I have unistalled iTunes, reinstalled it, uninstalled Bonjour, reinstalled it (it comes with iTunes), searched the registry and cleaned it (Warning: do this at your own risk as you risk destabilising Windows), I have tried disabling my firewall on the PC and/or on the router, uninstalled the Antivirus / Firewall software (Norton) on the PC, I have added the Ports required for the Apple TV to my router and firewall software, I have read many, many forum posts about what has worked for other people and I tried them all in various combinations.
I decided having tried the above that the problem must be the Windows PC, so I swapped it for a few days with a laptop, connected wirelessly to the router. I had an iTunes library on the laptop so I shared it with the Apple TV and stopped iTunes running on my relative's PC. For a few days it actually worked, the Apple TV would play one movie/music track and I could select another and play it after a few minutes, a partial solution had been found except the laptop was needed elsewhere and I wanted the Windows PC to be the source for the iTunes library. I briefly considered suggesting they should buy a modern PC or Mac as their Windows PC was around 9 years old, may be that was the problem? This would have cost around £400+ and was out of the question. Fortunately I had a spare PC and I decided to swap it with the Windows PC, it was only a couple of years old and as such it must be 'better' I thought. Swapping one PC with another and transferring e-mails and documents etc. took quite a few hours but it was done. I uninstalled iTunes, reinstalled it and set up the home sharing again. This second Windows PC was running XP (SP3) and Norton 360 Firewall/Anitvirus software. I checked that after installing iTunes the Program rules in Norton were allowing the TCP and UDP communications expected by the Apple TV, I noted these were not specific ports but all TCP and all UDP communications were allowed. All of this met the recommendations that other posts had suggested. I tried it with the Apple TV but no, exactly the same problem, the iTunes library could not be found after a few minutes.
I found that if I restarted the Apple TV it would connect and play a file (movie/music etc) but if I played an iTunes trailer or just waited a minute or so then it would lose the connection. Another symptom would be when I landed on the 'Compters' icon it would tell me to 'enable home sharing on the PC with this Apple ID' , which I had already done.
If I tried playing via the Apple TV while selecting tracks from within iTunes on the PC, then sometimes the AirPlay icon was present or not present, sometimes worked and would then always not work until I restarted at least iTunes and the Apple TV, if not also the router or PC, whatever I tried it would not result in a connection between the Apple TV and the PC that would survive more than a few moniutes at a time.
Having swapped the Windows PC hosting the iTunes library with another I swapped the Apple TV again with one from my house, again same behaviour. So this suggested the problem was the BTHomeHub router as that was the only bit of hardware not exchanged. I compared its settings with the same unit at my house, I tried forwarding ports, I tried chaging the security from the default 'WPA & WPA2' to WPA or WPA2, still no solution. I tried reducing the default WiFi connection protocol from 802b/g/n to 802/b/g. I tried variations of all the other possible settings that could be changed but in the end set them to match the ones at my house. Still no solution. I considered buying an Airport Extreme or similar to link that via an ethernet cable to the router and enable it to be the WiFi access point for the Apple TV. This would have cost around £80 similar to the cost of the Apple TV itself, so was also dismissed as an idea.
I decided to restore the router to factory settings, this was done and I set up the WiFi connection again to the Apple TV, still no solution, same behaviour on the Apple TV. I decided it must be a problem with the WiFi so I tried a direct ethernet cable trailed through the house from the router to the Apple TV to eliminate the WiFi involvement, that would have to be the answer, wouldn't it? No, same problem.
I discovered some useful diagnostics along the way that are somewhat techie but worth persevering with as they could be useful for diagnosing what the problem could be. Find out on your router what the IP Address is for your computer that is hosting your iTunes library and the IP Address for your Apple TV. The IP address is essential for either device to connect with each other or the internet. The Apple TV IP address can be seen via Settings/General/Network, it has the form like '192.168.1.69' and for the PC it was '192.168.1.80', the values don't have a particular significance but the last digits after the 3rd dot will be different for each device.
On the PC (or Mac), open a Command (PC) or Terminal(Mac) prompt and try to 'ping' the Apple TV to see if you get a response
e.g.
c:\ping 192.168.1.69
or
c:\ping apple-tv
You should get a response indicating the number of milliseconds it takes for the 'ping' to be returned to the PC from the Apple TV , this will show that the PC can connect to the Apple TV, if it does not get a response then you should check that the PC and Apple TV are connected to the same network (either wired or wifi). You must be able to get a successful ping for the connection between the PC and the Apple TV to work at all.
Another diagnostic is to check the network status on the PC (or Mac)
e.g.
c:\netstat -an
This will show all the current TCP/UDP connections and also the local and remote IP addresses and ports. Look for the IP address of the Apple TV in the third column, there will be many rows returned so just concentrate on the rows with the IP addressses of the PC and the Apple TV
e.g. look for rows like the following:
TCP 192.169.1.80:3689 192.168.1.69:49123 ESTABLISHED
UDP 192.168.1.80:5353 *.*
UDP *.123 *.*
TCP Port 3689 is used by the Apple TV to communicate with iTunes for playing content. This connection is essential, there may be more than one 'established' connection to the remote Apple TV from the local PC.
UDP Port 5353 is used by the Apple Bonjour service to send multicast communications between iTunes and any iOS devices on the same network, such as the Apple TV, again it is essential.
Port 123 is used by Apple products to obtain the date and time, the UDP row above shows that any local IP Address can communicate with any remote IP address on the router's network and provide it with date and time information.
If your firewall software on the PC is blocking any of these ports then the 'netstat' command is useful to see if you need to unblock any. In my experience, this port unblocking was not necessary as when I installed iTunes, the Norton software automatically set up appropriate rules for the iTunes program, and opened the required TCP and UDP communications as iTunes needed.
Likewise, on the router itself, I have the UPnP setting enabled and this allows software like iTunes and Bonjour to traverse the router's firewall without it being necesssary to explicitly set the ports to be forwarded.
If I started the Apple TV, and ran the 'netstat -an' command over the next few minutes I could see the number of rows for the Apple TV diminish, and this was a symptom of the dropping connection problem.
Ultimately having replaced the Apple TV with another 'working' one , swapped the PC, restored the router to factory defaults, disabled the Windows or Norton firewall, tried ethernet and WiFi connection between the router and Apple TV it struck me that the only component I had not considered was the insignificant ethernet cable linking the PC to the router. This has been present since the router was installed for the original PC around 4 years ago. But surely this was how the original PC and the swapped in PC were getting to the internet quite normally and successfully? Also this was how the Apple TV was accessing the PC via WiFi then via the router through this ethernet cable, there was no way it could be the cable, cables don't allow a connection for a short time and then cause a timeout can they?. Thus, confused, and with all other avenues explored, I removed the cable between the PC and the router and enabled a WiFi connection from the PC to the router. After restarting the PC, Router and Apple TV, just to be sure, I tried the Apple TV again.
I could play some music on the Apple TV from the iTunes library, I could play it for a minute or so and then go to movies and play a movie from the iTunes library. I tried to play an iTunes trailer, some YouTube videos, these worked as usual. I then went back to the library and yes, I could play another music track or another movie. I forced the Apple TV to 'sleep' via Settings/General/Sleep Now and tried again, I woke it up and could play any music or movie from the library. Elated, I went out for meal with the family, nervously hoping throughout the meal that the solution had been found. After a couple of hours we returned, woke up the Apple TV and yes, oh yes!, it would connect with the library and play a succession of music or videos without seeing any dropped connections. Several hours later I could wake up the Apple TV again and select any content from the iTunes library on the PC and play it, finally the unit is behaving as I would expect.
This solution may not apply for all, but it worth following all of the components in the path between the Apple TV, router, computer (either PC or Mac) and the iTunes library and checking that each is able to commmunicate successfully and over a period of time reliably so that the Apple TV can perform as flawlessly as it is capable of.
Don't, as I did expect the solution to involve a complicated series of special settings of ports or communications protocol changes. Do perform a clean install of iTunes and keep it updated, do keep Firewall settings simple and let the settings be default settings, do rely on UPnP (Universal Plug and Play) on the router. Let the router select which channel it wants to use, it will select the channel with least interference...and check out that insignificant ethernet cable if you have one. It might work fine for general communications from the computer to router to the internet but it can be a source of connections dropping on the Apple TV!
My relative is now a happy Apple TV user too.

Useful to watch what is happening to the TCP/UDP connections when the Apple TV is connected to iTunes and when it is actually playing some media from iTunes and when it stops playing.
To see this, use the Network Statistics command 'netstat' from a Command prompt (Windows PC) / Terminal Window (Mac):
e.g. for Windows:
c:\netstat -an 5
This repeats the netstat command every 5 seconds, use Ctrl-C to quit the command. (Use 'netstat -h' for help with this command)
While iTunes is running there will be a number of TCP records displayed for the computer's IP address using port 3689, showing at least 3 ports in use for the Apple TV's IP address.
i.e.
TCP host_ip:3689 apple_tv_ip:49187 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49196 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49255 ESTABLISHED
When it is playing content there are more connections established, some of these rows will gradually disappear when the media file stops playing. These addional TCP records show iTunes using different ports from 3689, but only while media files are being played.
When a video file is played, (on this Windows PC at least) the iTunes host is using ports 4463 and 4464, with the Apple TV using port 7000. When playing a music track or podcast, the iTunes host is using port 4472 or 4489 and the Apple TV is using port 5000.
When the media is playing, the fourth column returned by the 'netstat -an 5' command : 'State' shows as 'ESTABLISHED' and shortly after the media file is stopped playing it shows as 'TIME_WAIT' until the record disappears after a minute or so.

Simple editor for Apple TV video?

I'm looking for something simple for editing video for the Apple TV, just to chop off the ends and some interior segments (eliminate commercials). The editor that's part of Eye TV works very well for this, I can control on a frame level where the cuts are made, then export to Apple TV. But I've been having trouble finding a similar solution for other video and there seems no way to get non-Eye TV recorded video into Eye TV that I can figure out.
I've tried iMovie 08 and iMovie HD, ugh. I don't want a project that takes hours to process on import from H.264. I've tried MPEG Streamclip and it doesn't seem to give me the fine-grained control I'm looking for. Maybe QuickTime Pro? Anyone have any other suggestions? I guess I'm looking for something that's got simple splicing/cutting, not the more elaborate stuff iMovie does. Any suggestions are greatly appreciated.

I don't think QTPro would be an option as even with the MPEG2 plugin I don't think you can edit muxed audio/video and you just end up with a silent video. May work for other formats though.
Part of the problem is likely to be the fact that most compressed formats do not store every individual frame, but store key frames and 'delta' data indicating the change from the key frames. Many editors snap to the key frames when editing which doesn't give you that perfect control. I've got the EyeTV software but never really edited with it.
There was Windows software by a company called Womble that allowed single frame MPEG editing; I suspect there's a Mac solution I'm not aware of.
Might be worth saying which formats specifically you're trying to edit apart from those EyeTV recordings.
AC

Solution for black line in Ipod classic screen?

Hello
Last week my ipod fell on the floor and since then I have a black line in the middle of the screen. The ipod is phisically intact, no scratch, not broken. Only when I turn it on, I have a big black line in the middle. At the beginning it was small dots and now it s a big line
Is there any solution? Change the screen? Or do I have to live with it?
Thanks a lot in advance
Vivile

When you drop it, the impact knock off some connection in the Display circuitry, those SMT balls, so the missing connection cause the unwanted lines.
However if you are lucky, just try
this iPod Hard Reset ( it wont delete anything on your iPod)
Toggle the Hold switch ( make sure you dont see the red mark)
Press Menu and center buttons simultaneously for about 10 secs till the Apple Logo comes ON then release the buttons.
Select you language preferrence.
See this Apple support article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!
You can change your screen, if it is under warranty. (they replaced it with a refurbish iPod)
OR if it is not under warranty, to can also get it replaced for a fee at Apple shop
or bring it to a 3rd Party iPod service vendor.

Simple solution for Apple re: the ipod hearing damage issue;-)

Similar Messages

Maybe you are looking for